177 Commits

Author SHA1 Message Date
Kristoffer Dalby
58c94d2bd3 Rework map session
This commit restructures the map session in to a struct
holding the state of what is needed during its lifetime.

For streaming sessions, the event loop is structured a
bit differently not hammering the clients with updates
but rather batching them over a short, configurable time
which should significantly improve cpu usage, and potentially
flakyness.

The use of Patch updates has been dialed back a little as
it does not look like its a 100% ready for prime time. Nodes
are now updated with full changes, except for a few things
like online status.

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2024-04-15 12:31:53 +02:00
ohdearaugustin
74ff14eb30
update docs workflow (#1832) 2024-03-22 19:50:35 +01:00
Vitalij Dovhanyc
ef26f58085
update gh workflow actions (#1809) 2024-03-13 13:43:06 +01:00
Vitalij Dovhanyc
e15a08326c
simplify integration testing with matrix jobs (#1799)
* simplify integration testing with matrix jobs

* check if all of the integration tests are in the test-integration workflow
2024-03-02 22:36:38 +01:00
Kristoffer Dalby
384ca03208
new IP allocator and add postgres to integration tests. (#1756) 2024-02-18 19:31:29 +01:00
Kristoffer Dalby
f581d4d9c0
replace linter actions with nix to ensure consistent version (#1773) 2024-02-18 13:33:40 +01:00
Kristoffer Dalby
5109af94a3
login to docker registries (#1744)
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2024-02-12 16:01:56 +01:00
Kristoffer Dalby
905fdaa409
remove quotes from command (#1742)
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2024-02-12 15:09:19 +01:00
Kristoffer Dalby
0333e97630
Build docker images with ko (goreleaser) (#1716)
* make dockerfiles testing only note

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>

* setup ko image builder for goreleaser

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>

* remove release-docker

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>

* remove non-debug Dockerfile

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>

* Comments and lint

Signed-off-by: Kristoffer Dalby <kristoffer@dalby.cc>

* build debug images based on debian

Signed-off-by: Kristoffer Dalby <kristoffer@dalby.cc>

* remove debug flag for goreleaser

Signed-off-by: Kristoffer Dalby <kristoffer@dalby.cc>

---------

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@dalby.cc>
2024-02-12 14:53:07 +01:00
Kristoffer Dalby
91bb85e7d2
Update bug_report.md (#1672) 2024-02-09 07:27:13 +01:00
Kristoffer Dalby
00e7550e76
Add assert func for verifying status, netmap and netcheck (#1723) 2024-02-09 07:26:41 +01:00
Kristoffer Dalby
1e22f17f36
node selfupdate and fix subnet router when ACL is enabled (#1673)
Fixes #1604

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2024-01-18 17:30:25 +01:00
Kristoffer Dalby
65376e2842
ensure renabled auto-approve routes works (#1670) 2024-01-18 16:36:47 +01:00
Kristoffer Dalby
a592ae56b4
fix issue where advertise tags causes hang (#1669)
Fixes #1665

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2024-01-04 21:26:49 +01:00
Kristoffer Dalby
ac910fd44c
make stale shorter (#1646) 2023-12-10 15:30:30 +01:00
Kristoffer Dalby
f65f4eca35
ensure online status and route changes are propagated (#1564) 2023-12-09 18:09:24 +01:00
Azamat H. Hackimov
4c608a4b58
Fix Github Actions docs pipeline (#1622) 2023-11-29 15:11:00 +01:00
MichaelKo
85e92db505
Enhance pipeline stability and automatically retry unstable tests (#1566)
* add test retry to action

* add test retry to action
2023-11-27 18:32:52 +01:00
Kristoffer Dalby
a59aab2081
Remove support for non-noise clients (pre-1.32) (#1611) 2023-11-23 08:31:33 +01:00
Kristoffer Dalby
d0d6438337
Add workflow to autoupdate flake.lock deps (#1588)
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-11-06 12:48:52 +01:00
Kristoffer Dalby
56cf4b082e
Add github stale action (#1559) 2023-09-25 09:33:31 -05:00
Kristoffer Dalby
1766e6b5df General fixups discovered by checking errors
There was a lot of tests that actually threw a lot of errors and that did
not pass all the way because we didnt check everything. This commit should
fix all of these cases.

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-09-05 08:47:43 +02:00
Kristoffer Dalby
b4a4d0f760 Handle errors in integration test setups
Thanks @kev-the-dev

Closes #1460

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-09-05 08:47:43 +02:00
Kristoffer Dalby
fe75b71620 use nix caching and docker caching in CI
Also bumps tailscale version to trigger build and fixes a CLI test
that had the wrong capitalisation

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-06-29 12:49:36 +01:00
Kristoffer Dalby
61a2915f17 port reminder of integrationv1 test to v2
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-05-10 20:47:51 +02:00
Kristoffer Dalby
ba45d7dbd3
update readme and templates to clarify scope (#1437)
Co-authored-by: Juan Font <juanfontalonso@gmail.com>
2023-05-10 08:03:13 +01:00
Kristoffer Dalby
56dd734300
Add go profiling flag, and enable on integration tests (#1382) 2023-04-27 16:57:11 +02:00
Juan Font
1d2b4bca8a Remove legacy DERP tests 2023-04-24 12:35:29 +02:00
Juan Font
991ff25362 Added workflow for embedded derp 2023-04-24 12:17:24 +02:00
Kristoffer Dalby
e6b26499f7 release source code with vendored dependencies
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-04-20 08:13:38 +02:00
Kristoffer Dalby
5e74ca9414
Fix IPv6 in ACLs (#1339) 2023-04-16 12:26:35 +02:00
Andriy Kushnir (Orhideous)
4ec6894773 Build with strict mode 2023-04-07 15:24:13 +02:00
Andriy Kushnir (Orhideous)
ba905ff6fc Add GHA CI to build and deploy docs 2023-04-07 15:24:13 +02:00
Kristoffer Dalby
b684ac0668 Simplify goreleaser, package deb and rpm
This commit simplifies the goreleaser configuration and then adds nfpm
support which allows us to build .deb and .rpm for each of the ARCH we
support.

The deb and rpm packages adds systemd services and users, creates
directories etc and should in general give the user a working
environment. We should be able to remove a lot of the complicated,
PEBCAK inducing documentation after this.

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-04-07 11:06:42 +02:00
Kristoffer Dalby
c7b459b615
Fix issue where ACL * would filter out returning connections (#1279) 2023-03-27 19:19:32 +02:00
Kristoffer Dalby
e38efd3cfa
Add ACL test for limiting a single port. (#1258) 2023-03-20 08:52:52 +01:00
Kristoffer Dalby
a5562850a7
MapResponse optimalisations, peer list integration tests (#1254)
Co-authored-by: Allen <979347228@qq.com>
2023-03-06 17:50:26 +01:00
Juan Font
54f5c249f1
Fix various linting issues + golang-lint upgrade (#1245) 2023-03-03 18:22:47 +01:00
Kristoffer Dalby
b3f78a209a Post PR comment when nix vendor sum breaks
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-03-02 18:17:59 +01:00
Juan Font
7c765fb3dc Update prettier action
Update prettier action
2023-02-26 13:54:30 +01:00
Kristoffer Dalby
c39085911f Add node expiry test
This commits adds a test to verify that nodes get updated if a node in
their network expires.

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-02-03 09:26:22 +01:00
Kristoffer Dalby
ce587d2421 Update test workflows
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-02-01 10:58:37 +01:00
Kristoffer Dalby
da48cf64b3 Set OpenID Connect Expiry
This commit adds a default OpenID Connect expiry to 180d to align with
Tailscale SaaS (previously infinite or based on token expiry).

In addition, it adds an option use the expiry time from the Token sent
by the OpenID provider. This will typically cause really short expiry
and you should only turn on this option if you know what you are
desiring.

This fixes #1176.

Co-authored-by: Even Holthe <even.holthe@bekk.no>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-01-31 18:55:16 +01:00
Kristoffer Dalby
cffa040474 Cancel old builds if new commits appear
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-01-30 14:57:10 +01:00
Kristoffer Dalby
727d95b477 Improve generated integration tests
- Save logs from control(headscale) on every run to tmp
- Upgrade nix-actions
- Cancel builds if new commit is pushed
- Fix a sorting bug in user command test

Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-01-30 14:43:03 +01:00
Kristoffer Dalby
81254cdf7a Limit run regex for generated workflows
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-01-06 18:36:31 +01:00
Kristoffer Dalby
7274fdacc6 Generate github action jobs for integration tests
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-01-06 12:32:24 +01:00
Kristoffer Dalby
91c1f54b49 Remove "run all v2 job"
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2023-01-06 12:32:24 +01:00
Juan Font
8e8b65bb84 Add ko-fi sponsor button 2022-12-22 17:25:49 +01:00
Kristoffer Dalby
53858a32f1 dont fail docker if nothing to delete
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
2022-12-13 23:13:23 -08:00