280 lines
8.3 KiB
C++
Raw Normal View History

2015-07-08 08:39:24 -07:00
/*
* Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#include "rffc507x.hpp"
#include <array>
#include "utility.hpp"
#include "hackrf_hal.hpp"
#include "hackrf_gpio.hpp"
using namespace hackrf::one;
#include "hal.h"
namespace rffc507x {
/* Empirical tests indicate no minimum reset pulse width, but the speed
* of the processor and GPIO probably produce at least 20ns pulse width.
*/
constexpr float seconds_during_reset = 1.0e-6;
constexpr halrtcnt_t ticks_during_reset = (base_m4_clk_f * seconds_during_reset + 1);
/* Empirical testing indicates >3.5us delay required after reset, before
* registers can be reliably written. Make it 5us, just for fun. Tests were
* conducted at high temperatures (with a hair dryer) increased room
* temperature minimum delay of 2.9us to the requirement above.
*/
constexpr float seconds_after_reset = 5.0e-6;
constexpr halrtcnt_t ticks_after_reset = (base_m4_clk_f * seconds_after_reset + 1);
constexpr auto reference_frequency = rffc5072_reference_f;
namespace vco {
constexpr rf::FrequencyRange range{2700000000, 5400000000};
2015-07-08 08:39:24 -07:00
} /* namespace vco */
namespace lo {
constexpr size_t divider_log2_min = 0;
constexpr size_t divider_log2_max = 5;
constexpr size_t divider_min = 1U << divider_log2_min;
constexpr size_t divider_max = 1U << divider_log2_max;
constexpr rf::FrequencyRange range{vco::range.minimum / divider_max, vco::range.maximum / divider_min};
2015-07-08 08:39:24 -07:00
size_t divider_log2(const rf::Frequency lo_frequency) {
/* TODO: Error */
/*
if( lo::range.out_of_range(lo_frequency) ) {
return;
}
*/
/* Compute LO divider. */
auto lo_divider_log2 = lo::divider_log2_min;
auto vco_frequency = lo_frequency;
while (vco::range.below_range(vco_frequency)) {
vco_frequency <<= 1;
lo_divider_log2 += 1;
}
return lo_divider_log2;
2015-07-08 08:39:24 -07:00
}
} /* namespace lo */
namespace prescaler {
constexpr rf::Frequency max_frequency = 1600000000U;
constexpr size_t divider_log2_min = 1;
constexpr size_t divider_log2_max = 2;
constexpr size_t divider_min = 1U << divider_log2_min;
constexpr size_t divider_max = 1U << divider_log2_max;
constexpr size_t divider_log2(const rf::Frequency vco_frequency) {
return (vco_frequency > (prescaler::divider_min * prescaler::max_frequency))
? prescaler::divider_log2_max
: prescaler::divider_log2_min;
2015-07-08 08:39:24 -07:00
}
} /* namespace prescaler */
struct SynthConfig {
const size_t lo_divider_log2;
const size_t prescaler_divider_log2;
const uint64_t n_divider_q24;
static SynthConfig calculate(
const rf::Frequency lo_frequency) {
/* RFFC507x frequency synthesizer is is accurate to about 2ppb (two parts
* per BILLION). There's not much point to worrying about rounding and
* tuning error, when it amounts to 8Hz at 5GHz!
*/
const size_t lo_divider_log2 = lo::divider_log2(lo_frequency);
const size_t lo_divider = 1U << lo_divider_log2;
const rf::Frequency vco_frequency = lo_frequency * lo_divider;
const size_t prescaler_divider_log2 = prescaler::divider_log2(vco_frequency);
const uint64_t prescaled_lo_q24 = vco_frequency << (24 - prescaler_divider_log2);
const uint64_t n_divider_q24 = prescaled_lo_q24 / reference_frequency;
return {
lo_divider_log2,
prescaler_divider_log2,
n_divider_q24,
};
}
2015-07-08 08:39:24 -07:00
};
/* Readback values, RFFC5072 rev A:
* 0000: 0x8a01 => dev_id=1000101000000 mrev_id=001
* 0001: 0x3f7c => lock=0 ct_cal=0111111 cp_cal=011111 ctfail=0 0
* 0010: 0x806f => v0_cal=10000000 v1_cal=01101111
* 0011: 0x0000 => rsm_state=00000 f_errflag=00
* 0100: 0x0000 => vco_count_l=0
* 0101: 0x0000 => vco_count_h=0
* 0110: 0xc000 => cal_fbi=1 cal_fbq=1
* 0111: 0x0000 => vco_sel=0 vco_tc_curve=0
*/
void RFFC507x::init() {
gpio_rffc5072_resetx.set();
gpio_rffc5072_resetx.output();
reset();
2015-07-08 08:39:24 -07:00
_bus.init();
2015-07-08 08:39:24 -07:00
_dirty.set();
flush();
2015-07-08 08:39:24 -07:00
}
void RFFC507x::reset() {
/* TODO: Is RESETB pin ignored if sdi_ctrl.sipin=1? Programming guide
* description of sdi_ctrl.sipin suggests the pin is not ignored.
*/
gpio_rffc5072_resetx.clear();
halPolledDelay(ticks_during_reset);
gpio_rffc5072_resetx.set();
halPolledDelay(ticks_after_reset);
2015-07-08 08:39:24 -07:00
}
void RFFC507x::flush() {
if (_dirty) {
for (size_t i = 0; i < _map.w.size(); i++) {
if (_dirty[i]) {
write(i, _map.w[i]);
}
}
_dirty.clear();
}
2015-07-08 08:39:24 -07:00
}
void RFFC507x::write(const address_t reg_num, const spi::reg_t value) {
_bus.write(reg_num, value);
2015-07-08 08:39:24 -07:00
}
spi::reg_t RFFC507x::read(const address_t reg_num) {
return _bus.read(reg_num);
2015-07-08 08:39:24 -07:00
}
void RFFC507x::write(const Register reg, const spi::reg_t value) {
write(toUType(reg), value);
2015-07-08 08:39:24 -07:00
}
spi::reg_t RFFC507x::read(const Register reg) {
return read(toUType(reg));
2015-07-08 08:39:24 -07:00
}
void RFFC507x::flush_one(const Register reg) {
const auto reg_num = toUType(reg);
write(reg_num, _map.w[reg_num]);
_dirty.clear(reg_num);
2015-07-08 08:39:24 -07:00
}
void RFFC507x::enable() {
_map.r.sdi_ctrl.enbl = 1;
flush_one(Register::SDI_CTRL);
2015-07-08 08:39:24 -07:00
/* TODO: Reset PLLCPL after CT_CAL? */
2015-07-08 08:39:24 -07:00
/* TODO: After device is enabled and CT_cal is complete and VCO > 3.2GHz,
* change prescaler divider to 2, update synthesizer ratio, change
* lf.pllcpl from 3 to 2.
*/
2015-07-08 08:39:24 -07:00
}
void RFFC507x::disable() {
_map.r.sdi_ctrl.enbl = 0;
flush_one(Register::SDI_CTRL);
2015-07-08 08:39:24 -07:00
}
void RFFC507x::set_mixer_current(const uint8_t value) {
/* MIX IDD = 0b000 appears to turn the mixer completely off */
/* TODO: Adjust mixer current. Graphs in datasheet suggest:
* MIX_IDD=1 has lowest noise figure (10.1dB vs 13dB @ MIX_IDD=7).
* MIX_IDD=5 has highest IP3 (24dBm vs 10.3dBm @ MIX_IDD=1).
* MIX_IDD=5 has highest P1dB (11.8dBm vs 1.5dBm @ MIX_IDD=1).
* Mixer input impedance ~85 Ohms at MIX_IDD=4.
* Mixer input impedance inversely proportional to MIX_IDD.
* Balun balanced (mixer) side is 100 Ohms. Perhaps reduce MIX_IDD
* a bit to get 100 Ohms from mixer.
*/
_map.r.mix_cont.p1mixidd = value;
_map.r.mix_cont.p2mixidd = value;
flush_one(Register::MIX_CONT);
2015-07-08 08:39:24 -07:00
}
void RFFC507x::set_frequency(const rf::Frequency lo_frequency) {
const SynthConfig synth_config = SynthConfig::calculate(lo_frequency);
/* Boost charge pump leakage if VCO frequency > 3.2GHz, indicated by
* prescaler divider set to 4 (log2=2) instead of 2 (log2=1).
*/
if (synth_config.prescaler_divider_log2 == 2) {
_map.r.lf.pllcpl = 3;
} else {
_map.r.lf.pllcpl = 2;
}
flush_one(Register::LF);
_map.r.p2_freq1.p2n = synth_config.n_divider_q24 >> 24;
_map.r.p2_freq1.p2lodiv = synth_config.lo_divider_log2;
_map.r.p2_freq1.p2presc = synth_config.prescaler_divider_log2;
_map.r.p2_freq2.p2nmsb = (synth_config.n_divider_q24 >> 8) & 0xffff;
_map.r.p2_freq3.p2nlsb = synth_config.n_divider_q24 & 0xff;
_dirty[Register::P2_FREQ1] = 1;
_dirty[Register::P2_FREQ2] = 1;
_dirty[Register::P2_FREQ3] = 1;
flush();
2015-07-08 08:39:24 -07:00
}
2016-01-22 23:24:20 -08:00
void RFFC507x::set_gpo1(const bool new_value) {
if (new_value) {
_map.r.gpo.p2gpo |= 1;
_map.r.gpo.p1gpo |= 1;
} else {
_map.r.gpo.p2gpo &= ~1;
_map.r.gpo.p1gpo &= ~1;
}
flush_one(Register::GPO);
2016-01-22 23:24:20 -08:00
}
2015-07-08 08:39:24 -07:00
spi::reg_t RFFC507x::readback(const Readback readback) {
/* TODO: This clobbers the rest of the DEV_CTRL register
* Time to implement bitfields for registers.
*/
_map.r.dev_ctrl.readsel = toUType(readback);
flush_one(Register::DEV_CTRL);
2015-07-08 08:39:24 -07:00
return read(Register::READBACK);
2015-07-08 08:39:24 -07:00
}
} /* namespace rffc507x */