mayhem-firmware/firmware/common/portapack_persistent_memory.cpp

1090 lines
36 KiB
C++
Raw Normal View History

/*
* Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
* Copyright (C) 2016 Furrtek
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#include "portapack_persistent_memory.hpp"
#include "audio.hpp"
#include "crc.hpp"
#include "file.hpp"
#include "hal.h"
#include "irq_controls.hpp"
#include "memory_map.hpp"
#include "portapack.hpp"
#include "string_format.hpp"
#include "ui_styles.hpp"
#include "ui_painter.hpp"
#include "utility.hpp"
#include <algorithm>
#include <string>
#include <fstream>
#include <utility>
#include <ch.h>
#include <hal.h>
using namespace std;
namespace portapack {
namespace persistent_memory {
constexpr rf::Frequency target_frequency_reset_value{100000000};
using ppb_range_t = range_t<ppb_t>;
constexpr ppb_range_t ppb_range{-99000, 99000};
constexpr ppb_t ppb_reset_value{0};
using tone_mix_range_t = range_t<int32_t>;
constexpr tone_mix_range_t tone_mix_range{10, 99};
constexpr int32_t tone_mix_reset_value{20};
using afsk_freq_range_t = range_t<int32_t>;
constexpr afsk_freq_range_t afsk_freq_range{1, 4000};
constexpr int32_t afsk_mark_reset_value{1200};
constexpr int32_t afsk_space_reset_value{2200};
using modem_baudrate_range_t = range_t<int32_t>;
constexpr modem_baudrate_range_t modem_baudrate_range{50, 9600};
constexpr int32_t modem_baudrate_reset_value{1200};
/*
using modem_bw_range_t = range_t<int32_t>;
constexpr modem_bw_range_t modem_bw_range { 1000, 50000 };
constexpr int32_t modem_bw_reset_value { 15000 };
*/
using modem_repeat_range_t = range_t<int32_t>;
constexpr modem_repeat_range_t modem_repeat_range{1, 99};
constexpr int32_t modem_repeat_reset_value{5};
using clkout_freq_range_t = range_t<uint32_t>;
constexpr clkout_freq_range_t clkout_freq_range{10, 60000};
constexpr uint16_t clkout_freq_reset_value{10000};
enum data_structure_version_enum : uint32_t {
VERSION_CURRENT = 0x10000005,
};
static const uint32_t TOUCH_CALIBRATION_MAGIC = 0x074af82f;
/* UI config.
* NB: Will be default init - override in defaults(). */
struct ui_config_t {
uint16_t clkout_freq;
// NB: bitsfields have to be the same type or the compiler will
// split into a new byte hence uint8_t for these booleans.
uint8_t backlight_timeout : 3;
uint8_t enable_backlight_timeout : 1;
uint8_t show_gui_return_icon : 1;
uint8_t load_app_settings : 1;
uint8_t save_app_settings : 1;
uint8_t show_large_qr_code : 1;
bool disable_touchscreen : 1;
bool hide_clock : 1;
bool clock_show_date : 1;
bool clkout_enabled : 1;
bool UNUSED_1 : 1;
bool stealth_mode : 1;
bool config_login : 1;
bool config_splash : 1;
};
static_assert(sizeof(ui_config_t) == sizeof(uint32_t));
/* Additional UI config.
* NB: Will be default init - override in defaults(). */
struct ui_config2_t {
/* Top icon bar */
bool hide_speaker : 1;
bool hide_converter : 1;
bool hide_stealth : 1;
bool hide_camera : 1;
bool hide_sleep : 1;
bool hide_bias_tee : 1;
bool hide_clock : 1;
bool hide_sd_card : 1;
bool hide_mute : 1;
bool UNUSED_1 : 1;
bool UNUSED_2 : 1;
bool UNUSED_3 : 1;
bool UNUSED_4 : 1;
bool UNUSED_5 : 1;
bool UNUSED_6 : 1;
bool UNUSED_7 : 1;
uint8_t PLACEHOLDER_2;
uint8_t PLACEHOLDER_3;
};
static_assert(sizeof(ui_config2_t) == sizeof(uint32_t));
/* Additional config.
* NB: Will be default init - override in defaults(). */
struct misc_config_t {
bool mute_audio : 1;
bool disable_speaker : 1;
bool config_disable_external_tcxo : 1;
bool config_sdcard_high_speed_io : 1;
bool UNUSED_4 : 1;
bool UNUSED_5 : 1;
bool UNUSED_6 : 1;
bool UNUSED_7 : 1;
uint8_t PLACEHOLDER_1;
uint8_t PLACEHOLDER_2;
uint8_t PLACEHOLDER_3;
};
static_assert(sizeof(misc_config_t) == sizeof(uint32_t));
/* IMPORTANT: Update dump_persistent_memory (below) when changing data_t. */
/* Struct must pack the same way on M4 and M0 cores.
* NB: When adding new members, keep 32bit-aligned.*/
struct data_t {
data_structure_version_enum structure_version;
int64_t target_frequency;
int32_t correction_ppb;
uint32_t touch_calibration_magic;
touch::Calibration touch_calibration; // 7 * 32 bits.
// Modem
uint32_t modem_def_index;
serial_format_t serial_format;
int32_t modem_bw;
int32_t afsk_mark_freq;
int32_t afsk_space_freq;
int32_t modem_baudrate;
int32_t modem_repeat;
// Play dead unlock (Used?)
uint32_t playdead_magic;
uint32_t playing_dead;
uint32_t playdead_sequence;
// UI Config
ui_config_t ui_config;
uint32_t pocsag_last_address;
uint32_t pocsag_ignore_address;
int32_t tone_mix;
// Hardware
uint32_t hardware_config;
// Recon App
uint64_t recon_config;
// enable or disable converter
bool converter;
// set up converter (false) or down converter (true) converter
bool updown_converter;
bool updown_frequency_rx_correction;
bool updown_frequency_tx_correction;
bool UNUSED_4 : 1;
bool UNUSED_5 : 1;
bool UNUSED_6 : 1;
bool UNUSED_7 : 1;
// up/down converter offset
int64_t converter_frequency_offset;
// frequency correction
uint32_t frequency_rx_correction;
uint32_t frequency_tx_correction;
Support for Rotary Encoder Dial sensitivity levels, issue #965 (#1057) * Support for 3 levels of rotary encoder sensitivity #965 Backend support; UI will still need to call set function to configure. * Support for 3 levels of rotary encoder sensitivity #965 Backend support only. UI will still need to be changed to call the set_sensitivity() function to configure. * Removed trailing space * Deleted blank lines to see if format checker will be happier * Simpler support for multiple levels of encoder sensitivity, for issue #965 Removed the convoluted code :-) and instead just using a 2-dimensional array to choose which transition map to use. For now I only have 2 (vs 3) levels enabled as well, to save code space and because high-sensitivity is very touchy. * Simpler version of configurable encoder sensitivity, issue #965 * Formatting * Formatting test for Clang * Formatting test * Formatting (removed helpful comment) * Formatting test (remove commented-out code) * Formatting & swapping medium/low so default mode=0 * Swapped medium/low so default mode=0 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Removed unneeded range check (trusting in pmem checksum)
2023-05-25 02:32:12 +00:00
// Rotary encoder dial sensitivity (encoder.cpp/hpp)
uint16_t encoder_dial_sensitivity : 4;
uint16_t UNUSED_8 : 12;
Support for Rotary Encoder Dial sensitivity levels, issue #965 (#1057) * Support for 3 levels of rotary encoder sensitivity #965 Backend support; UI will still need to call set function to configure. * Support for 3 levels of rotary encoder sensitivity #965 Backend support only. UI will still need to be changed to call the set_sensitivity() function to configure. * Removed trailing space * Deleted blank lines to see if format checker will be happier * Simpler support for multiple levels of encoder sensitivity, for issue #965 Removed the convoluted code :-) and instead just using a 2-dimensional array to choose which transition map to use. For now I only have 2 (vs 3) levels enabled as well, to save code space and because high-sensitivity is very touchy. * Simpler version of configurable encoder sensitivity, issue #965 * Formatting * Formatting test for Clang * Formatting test * Formatting (removed helpful comment) * Formatting test (remove commented-out code) * Formatting & swapping medium/low so default mode=0 * Swapped medium/low so default mode=0 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Removed unneeded range check (trusting in pmem checksum)
2023-05-25 02:32:12 +00:00
// Headphone volume in centibels.
int16_t headphone_volume_cb;
// Misc flags
misc_config_t misc_config;
// Additional UI settings.
ui_config2_t ui_config2;
// recovery mode magic value storage
uint32_t config_mode_storage;
constexpr data_t()
: structure_version(data_structure_version_enum::VERSION_CURRENT),
target_frequency(target_frequency_reset_value),
correction_ppb(ppb_reset_value),
touch_calibration_magic(TOUCH_CALIBRATION_MAGIC),
touch_calibration(touch::Calibration()),
modem_def_index(0), // TODO: Unused?
serial_format(),
modem_bw(15000), // TODO: Unused?
afsk_mark_freq(afsk_mark_reset_value),
afsk_space_freq(afsk_space_reset_value),
modem_baudrate(modem_baudrate_reset_value),
modem_repeat(modem_repeat_reset_value),
playdead_magic(), // TODO: Unused?
playing_dead(), // TODO: Unused?
playdead_sequence(), // TODO: Unused?
ui_config(),
pocsag_last_address(0), // TODO: A better default?
pocsag_ignore_address(0), // TODO: A better default?
tone_mix(tone_mix_reset_value),
hardware_config(0),
recon_config(0),
converter(false),
updown_converter(false),
updown_frequency_rx_correction(false),
updown_frequency_tx_correction(false),
UNUSED_4(false),
UNUSED_5(false),
UNUSED_6(false),
UNUSED_7(false),
converter_frequency_offset(0),
frequency_rx_correction(0),
frequency_tx_correction(0),
encoder_dial_sensitivity(DIAL_SENSITIVITY_NORMAL),
UNUSED_8(0),
headphone_volume_cb(-600),
misc_config(),
ui_config2(),
config_mode_storage(CONFIG_MODE_NORMAL_VALUE) {
}
};
struct backup_ram_t {
private:
volatile uint32_t regfile[63];
volatile uint32_t check_value;
static void copy(const backup_ram_t& src, backup_ram_t& dst) {
for (size_t i = 0; i < 63; i++) {
dst.regfile[i] = src.regfile[i];
}
dst.check_value = src.check_value;
}
static void copy_from_data_t(const data_t& src, backup_ram_t& dst) {
const uint32_t* const src_words = (uint32_t*)&src;
const size_t word_count = (sizeof(data_t) + 3) / 4;
for (size_t i = 0; i < 63; i++) {
if (i < word_count) {
dst.regfile[i] = src_words[i];
} else {
dst.regfile[i] = 0;
}
}
}
uint32_t compute_check_value() {
CRC<32> crc{0x04c11db7, 0xffffffff, 0xffffffff};
for (size_t i = 0; i < 63; i++) {
const auto word = regfile[i];
crc.process_byte((word >> 0) & 0xff);
crc.process_byte((word >> 8) & 0xff);
crc.process_byte((word >> 16) & 0xff);
crc.process_byte((word >> 24) & 0xff);
}
return crc.checksum();
}
public:
/* default constructor */
backup_ram_t()
: check_value(0) {
const data_t defaults = data_t();
copy_from_data_t(defaults, *this);
}
/* copy-assignment operator */
backup_ram_t& operator=(const backup_ram_t& src) {
copy(src, *this);
return *this;
}
/* Calculate a check value from `this`, and check against
* the stored value.
*/
bool is_valid() {
return compute_check_value() == check_value;
}
/* Assuming `this` contains valid data, update the checksum
* and copy to the destination.
*/
void persist_to(backup_ram_t& dst) {
check_value = compute_check_value();
copy(*this, dst);
}
/* Access functions for DebugPmemView */
uint32_t pmem_data_word(uint32_t index) {
return (index > sizeof(regfile) / sizeof(uint32_t)) ? 0xFFFFFFFF : regfile[index];
}
uint32_t pmem_stored_checksum(void) {
return check_value;
}
uint32_t pmem_calculated_checksum(void) {
return compute_check_value();
}
};
static_assert(sizeof(backup_ram_t) == memory::map::backup_ram.size());
static_assert(sizeof(data_t) <= sizeof(backup_ram_t) - sizeof(uint32_t));
/* Uncomment to get a compiler error with the data_t size. */
// template <size_t N>
// struct ShowSize;
// ShowSize<sizeof(data_t)> __data_t_size;
static backup_ram_t* const backup_ram = reinterpret_cast<backup_ram_t*>(memory::map::backup_ram.base());
static backup_ram_t cached_backup_ram;
static data_t* data = reinterpret_cast<data_t*>(&cached_backup_ram);
namespace cache {
void defaults() {
cached_backup_ram = backup_ram_t();
set_config_backlight_timer(backlight_config_t{});
set_config_splash(true);
set_config_disable_external_tcxo(false);
set_encoder_dial_sensitivity(DIAL_SENSITIVITY_NORMAL);
set_config_speaker_disable(true); // Disable AK4951 speaker by default (in case of OpenSourceSDRLab H2)
// Default values for recon app.
set_recon_autosave_freqs(false);
set_recon_autostart_recon(true);
set_recon_continuous(true);
set_recon_clear_output(false);
set_recon_load_freqs(true);
set_recon_load_ranges(true);
set_recon_update_ranges_when_recon(true);
set_recon_load_hamradios(true);
set_recon_match_mode(0);
set_config_sdcard_high_speed_io(false, true);
}
void init() {
const auto switches_state = get_switches_state();
// ignore for valid check
auto config_mode_backup = config_mode_storage();
set_config_mode_storage(CONFIG_MODE_NORMAL_VALUE);
if (!(switches_state[(size_t)ui::KeyEvent::Left] && switches_state[(size_t)ui::KeyEvent::Right]) && backup_ram->is_valid()) {
// Copy valid persistent data into cache.
cached_backup_ram = *backup_ram;
// Check that structure data we copied into cache is the expected
// version. If not, initialize cache to defaults.
if (data->structure_version != data_structure_version_enum::VERSION_CURRENT) {
// TODO: Can provide version-to-version upgrade functions here,
// if we want to be fancy.
defaults();
}
} else {
// Copy defaults into cache.
defaults();
}
set_config_mode_storage(config_mode_backup);
}
void persist() {
cached_backup_ram.persist_to(*backup_ram);
}
} /* namespace cache */
uint32_t pmem_data_word(uint32_t index) {
return backup_ram->pmem_data_word(index);
}
uint32_t pmem_stored_checksum(void) {
return backup_ram->pmem_stored_checksum();
}
uint32_t pmem_calculated_checksum(void) {
return backup_ram->pmem_calculated_checksum();
}
rf::Frequency target_frequency() {
rf::tuning_range.reset_if_outside(data->target_frequency, target_frequency_reset_value);
return data->target_frequency;
}
void set_target_frequency(const rf::Frequency new_value) {
data->target_frequency = rf::tuning_range.clip(new_value);
}
volume_t headphone_volume() {
auto volume = volume_t::centibel(data->headphone_volume_cb);
volume = audio::headphone::volume_range().limit(volume);
return volume;
}
void set_headphone_volume(volume_t new_value) {
new_value = audio::headphone::volume_range().limit(new_value);
data->headphone_volume_cb = new_value.centibel();
}
ppb_t correction_ppb() {
ppb_range.reset_if_outside(data->correction_ppb, ppb_reset_value);
return data->correction_ppb;
}
void set_correction_ppb(const ppb_t new_value) {
const auto clipped_value = ppb_range.clip(new_value);
data->correction_ppb = clipped_value;
portapack::clock_manager.set_reference_ppb(clipped_value);
}
void set_touch_calibration(const touch::Calibration& new_value) {
data->touch_calibration = new_value;
data->touch_calibration_magic = TOUCH_CALIBRATION_MAGIC;
}
const touch::Calibration& touch_calibration() {
if (data->touch_calibration_magic != TOUCH_CALIBRATION_MAGIC) {
set_touch_calibration(touch::Calibration());
}
return data->touch_calibration;
}
int32_t tone_mix() {
tone_mix_range.reset_if_outside(data->tone_mix, tone_mix_reset_value);
return data->tone_mix;
}
void set_tone_mix(const int32_t new_value) {
data->tone_mix = tone_mix_range.clip(new_value);
}
int32_t afsk_mark_freq() {
afsk_freq_range.reset_if_outside(data->afsk_mark_freq, afsk_mark_reset_value);
return data->afsk_mark_freq;
}
void set_afsk_mark(const int32_t new_value) {
data->afsk_mark_freq = afsk_freq_range.clip(new_value);
}
int32_t afsk_space_freq() {
afsk_freq_range.reset_if_outside(data->afsk_space_freq, afsk_space_reset_value);
return data->afsk_space_freq;
}
void set_afsk_space(const int32_t new_value) {
data->afsk_space_freq = afsk_freq_range.clip(new_value);
}
int32_t modem_baudrate() {
modem_baudrate_range.reset_if_outside(data->modem_baudrate, modem_baudrate_reset_value);
return data->modem_baudrate;
}
void set_modem_baudrate(const int32_t new_value) {
data->modem_baudrate = modem_baudrate_range.clip(new_value);
}
/*
int32_t modem_bw() {
modem_bw_range.reset_if_outside(data->modem_bw, modem_bw_reset_value);
return data->modem_bw;
}
void set_modem_bw(const int32_t new_value) {
data->modem_bw = modem_bw_range.clip(new_value);
}
*/
uint8_t modem_repeat() {
modem_repeat_range.reset_if_outside(data->modem_repeat, modem_repeat_reset_value);
return data->modem_repeat;
}
void set_modem_repeat(const uint32_t new_value) {
data->modem_repeat = modem_repeat_range.clip(new_value);
}
serial_format_t serial_format() {
return data->serial_format;
}
void set_serial_format(const serial_format_t new_value) {
data->serial_format = new_value;
}
bool show_gui_return_icon() { // add return icon in touchscreen menu
return data->ui_config.show_gui_return_icon != 0;
}
bool show_bigger_qr_code() { // show bigger QR code
return data->ui_config.show_large_qr_code != 0;
}
bool disable_touchscreen() { // Option to disable touch screen
return data->ui_config.disable_touchscreen;
}
bool hide_clock() { // Hide clock from main menu
return data->ui_config.hide_clock;
}
bool clock_with_date() { // Show clock with date, if not hidden
return data->ui_config.clock_show_date;
}
bool clkout_enabled() {
return data->ui_config.clkout_enabled;
}
bool config_audio_mute() {
return data->misc_config.mute_audio;
}
bool config_speaker_disable() {
return data->misc_config.disable_speaker;
}
bool config_disable_external_tcxo() {
return data->misc_config.config_disable_external_tcxo;
}
bool config_sdcard_high_speed_io() {
return data->misc_config.config_sdcard_high_speed_io;
}
bool stealth_mode() {
return data->ui_config.stealth_mode;
}
bool config_login() {
return data->ui_config.config_login;
}
bool config_splash() {
return data->ui_config.config_splash;
}
uint8_t config_cpld() {
return data->hardware_config;
}
backlight_config_t config_backlight_timer() {
return {static_cast<backlight_timeout_t>(data->ui_config.backlight_timeout),
data->ui_config.enable_backlight_timeout == 1};
}
void set_gui_return_icon(bool v) {
data->ui_config.show_gui_return_icon = v ? 1 : 0;
}
void set_load_app_settings(bool v) {
data->ui_config.load_app_settings = v ? 1 : 0;
}
void set_save_app_settings(bool v) {
data->ui_config.save_app_settings = v ? 1 : 0;
}
void set_show_bigger_qr_code(bool v) {
data->ui_config.show_large_qr_code = v ? 1 : 0;
}
void set_disable_touchscreen(bool v) {
data->ui_config.disable_touchscreen = v;
}
void set_clock_hidden(bool v) {
data->ui_config.hide_clock = v;
}
void set_clock_with_date(bool v) {
data->ui_config.clock_show_date = v;
}
void set_clkout_enabled(bool v) {
data->ui_config.clkout_enabled = v;
}
void set_config_audio_mute(bool v) {
data->misc_config.mute_audio = v;
}
void set_config_speaker_disable(bool v) {
data->misc_config.disable_speaker = v;
}
void set_config_disable_external_tcxo(bool v) {
data->misc_config.config_disable_external_tcxo = v;
}
void set_config_sdcard_high_speed_io(bool v, bool save) {
if (v) {
/* 200MHz / (2 * 2) = 50MHz */
/* TODO: Adjust SCU pin configurations: pull-up/down, slew, glitch filter? */
sdio_cclk_set(2);
} else {
/* 200MHz / (2 * 4) = 25MHz */
sdio_cclk_set(4);
}
if (save)
data->misc_config.config_sdcard_high_speed_io = v;
}
void set_stealth_mode(bool v) {
data->ui_config.stealth_mode = v;
}
void set_config_login(bool v) {
data->ui_config.config_login = v;
}
void set_config_splash(bool v) {
data->ui_config.config_splash = v;
}
void set_config_cpld(uint8_t i) {
data->hardware_config = i;
}
void set_config_backlight_timer(const backlight_config_t& new_value) {
data->ui_config.backlight_timeout = static_cast<uint8_t>(new_value.timeout_enum());
data->ui_config.enable_backlight_timeout = static_cast<uint8_t>(new_value.timeout_enabled());
}
uint32_t pocsag_last_address() {
return data->pocsag_last_address;
}
void set_pocsag_last_address(uint32_t address) {
data->pocsag_last_address = address;
}
uint32_t pocsag_ignore_address() {
return data->pocsag_ignore_address;
}
void set_pocsag_ignore_address(uint32_t address) {
data->pocsag_ignore_address = address;
}
uint16_t clkout_freq() {
auto freq = data->ui_config.clkout_freq;
if (freq < clkout_freq_range.minimum || freq > clkout_freq_range.maximum)
set_clkout_freq(clkout_freq_reset_value);
return data->ui_config.clkout_freq;
}
void set_clkout_freq(uint16_t freq) {
data->ui_config.clkout_freq = freq;
}
/* Recon app */
bool recon_autosave_freqs() {
return (data->recon_config & 0x80000000UL) ? true : false;
}
bool recon_autostart_recon() {
return (data->recon_config & 0x40000000UL) ? true : false;
}
bool recon_continuous() {
return (data->recon_config & 0x20000000UL) ? true : false;
}
bool recon_clear_output() {
return (data->recon_config & 0x10000000UL) ? true : false;
}
bool recon_load_freqs() {
return (data->recon_config & 0x08000000UL) ? true : false;
}
bool recon_load_ranges() {
return (data->recon_config & 0x04000000UL) ? true : false;
}
bool recon_update_ranges_when_recon() {
return (data->recon_config & 0x02000000UL) ? true : false;
}
bool recon_load_hamradios() {
return (data->recon_config & 0x01000000UL) ? true : false;
}
bool recon_match_mode() {
return (data->recon_config & 0x00800000UL) ? true : false;
}
bool recon_auto_record_locked() {
return (data->recon_config & 0x00400000UL) ? true : false;
}
void set_recon_autosave_freqs(const bool v) {
data->recon_config = (data->recon_config & ~0x80000000UL) | (v << 31);
}
void set_recon_autostart_recon(const bool v) {
data->recon_config = (data->recon_config & ~0x40000000UL) | (v << 30);
}
void set_recon_continuous(const bool v) {
data->recon_config = (data->recon_config & ~0x20000000UL) | (v << 29);
}
void set_recon_clear_output(const bool v) {
data->recon_config = (data->recon_config & ~0x10000000UL) | (v << 28);
}
void set_recon_load_freqs(const bool v) {
data->recon_config = (data->recon_config & ~0x08000000UL) | (v << 27);
}
void set_recon_load_ranges(const bool v) {
data->recon_config = (data->recon_config & ~0x04000000UL) | (v << 26);
}
void set_recon_update_ranges_when_recon(const bool v) {
data->recon_config = (data->recon_config & ~0x02000000UL) | (v << 25);
}
void set_recon_load_hamradios(const bool v) {
data->recon_config = (data->recon_config & ~0x01000000UL) | (v << 24);
}
void set_recon_match_mode(const bool v) {
data->recon_config = (data->recon_config & ~0x00800000UL) | (v << 23);
}
void set_recon_auto_record_locked(const bool v) {
data->recon_config = (data->recon_config & ~0x00400000UL) | (v << 22);
}
/* UI Config 2 */
bool ui_hide_speaker() {
return data->ui_config2.hide_speaker;
}
bool ui_hide_mute() {
return data->ui_config2.hide_mute;
}
bool ui_hide_converter() {
return data->ui_config2.hide_converter;
}
bool ui_hide_stealth() {
return data->ui_config2.hide_stealth;
}
bool ui_hide_camera() {
return data->ui_config2.hide_camera;
}
bool ui_hide_sleep() {
return data->ui_config2.hide_sleep;
}
bool ui_hide_bias_tee() {
return data->ui_config2.hide_bias_tee;
}
bool ui_hide_clock() {
return data->ui_config2.hide_clock;
}
bool ui_hide_sd_card() {
return data->ui_config2.hide_sd_card;
}
void set_ui_hide_speaker(bool v) {
data->ui_config2.hide_speaker = v;
}
void set_ui_hide_mute(bool v) {
data->ui_config2.hide_mute = v;
}
void set_ui_hide_converter(bool v) {
data->ui_config2.hide_converter = v;
if (v)
data->converter = false;
}
void set_ui_hide_stealth(bool v) {
data->ui_config2.hide_stealth = v;
}
void set_ui_hide_camera(bool v) {
data->ui_config2.hide_camera = v;
}
void set_ui_hide_sleep(bool v) {
data->ui_config2.hide_sleep = v;
}
void set_ui_hide_bias_tee(bool v) {
data->ui_config2.hide_bias_tee = v;
}
void set_ui_hide_clock(bool v) {
data->ui_config2.hide_clock = v;
}
void set_ui_hide_sd_card(bool v) {
data->ui_config2.hide_sd_card = v;
}
/* Converter */
bool config_converter() {
return data->converter;
}
bool config_updown_converter() {
return data->updown_converter;
}
int64_t config_converter_freq() {
return data->converter_frequency_offset;
}
void set_config_converter(bool v) {
data->converter = v;
}
void set_config_updown_converter(bool v) {
data->updown_converter = v;
}
void set_config_converter_freq(int64_t v) {
data->converter_frequency_offset = v;
}
// Frequency correction settings
bool config_freq_tx_correction_updown() {
return data->updown_frequency_tx_correction;
}
bool config_freq_rx_correction_updown() {
return data->updown_frequency_rx_correction;
}
uint32_t config_freq_tx_correction() {
return data->frequency_tx_correction;
}
uint32_t config_freq_rx_correction() {
return data->frequency_rx_correction;
}
void set_freq_tx_correction_updown(bool v) {
data->updown_frequency_tx_correction = v;
}
void set_freq_rx_correction_updown(bool v) {
data->updown_frequency_rx_correction = v;
}
void set_config_freq_tx_correction(uint32_t v) {
data->frequency_tx_correction = v;
}
void set_config_freq_rx_correction(uint32_t v) {
data->frequency_rx_correction = v;
}
// Rotary encoder dial settings
Support for Rotary Encoder Dial sensitivity levels, issue #965 (#1057) * Support for 3 levels of rotary encoder sensitivity #965 Backend support; UI will still need to call set function to configure. * Support for 3 levels of rotary encoder sensitivity #965 Backend support only. UI will still need to be changed to call the set_sensitivity() function to configure. * Removed trailing space * Deleted blank lines to see if format checker will be happier * Simpler support for multiple levels of encoder sensitivity, for issue #965 Removed the convoluted code :-) and instead just using a 2-dimensional array to choose which transition map to use. For now I only have 2 (vs 3) levels enabled as well, to save code space and because high-sensitivity is very touchy. * Simpler version of configurable encoder sensitivity, issue #965 * Formatting * Formatting test for Clang * Formatting test * Formatting (removed helpful comment) * Formatting test (remove commented-out code) * Formatting & swapping medium/low so default mode=0 * Swapped medium/low so default mode=0 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965 * Removed unneeded range check (trusting in pmem checksum)
2023-05-25 02:32:12 +00:00
uint8_t config_encoder_dial_sensitivity() {
return data->encoder_dial_sensitivity;
}
void set_encoder_dial_sensitivity(uint8_t v) {
data->encoder_dial_sensitivity = v;
}
// Recovery mode magic value storage
static data_t* data_direct_access = reinterpret_cast<data_t*>(memory::map::backup_ram.base());
uint32_t config_mode_storage() {
return data_direct_access->config_mode_storage;
}
void set_config_mode_storage(uint32_t v) {
data_direct_access->config_mode_storage = v;
}
// PMem to sdcard settings
bool should_use_sdcard_for_pmem() {
return std::filesystem::file_exists(PMEM_FILEFLAG);
}
int save_persistent_settings_to_file() {
File outfile;
make_new_directory(SETTINGS_DIR);
auto error = outfile.create(PMEM_SETTING_FILE);
if (error)
return false;
outfile.write(reinterpret_cast<char*>(&cached_backup_ram), sizeof(backup_ram_t));
return true;
}
int load_persistent_settings_from_file() {
File infile;
auto error = infile.open(PMEM_SETTING_FILE);
if (error)
return false;
infile.read(reinterpret_cast<char*>(&cached_backup_ram), sizeof(backup_ram_t));
return true;
}
// Pmem size helper
size_t data_size() {
return sizeof(data_t);
}
// Dump pmem, receiver and transmitter models internals in human readable format
bool debug_dump() {
ui::Painter painter{};
std::string debug_dir = "DEBUG";
std::filesystem::path filename{};
File pmem_dump_file{};
// create new dump file name and DEBUG directory
make_new_directory(debug_dir);
filename = next_filename_matching_pattern(debug_dir + "/DEBUG_DUMP_????.TXT");
if (filename.empty()) {
painter.draw_string({0, 320 - 16}, ui::Styles::red, "COULD NOT GET DUMP NAME !");
return false;
}
// dump data fo filename
auto error = pmem_dump_file.create(filename);
if (error) {
painter.draw_string({0, 320 - 16}, ui::Styles::red, "ERROR DUMPING " + filename.filename().string() + " !");
return false;
}
pmem_dump_file.write_line("FW version: " VERSION_STRING);
pmem_dump_file.write_line("Ext APPS version req'd: 0x" + to_string_hex(VERSION_MD5));
pmem_dump_file.write_line("GCC version: " + to_string_dec_int(__GNUC__) + "." + to_string_dec_int(__GNUC_MINOR__) + "." + to_string_dec_int(__GNUC_PATCHLEVEL__));
// write persistent memory
pmem_dump_file.write_line("\n[Persistent Memory]");
// full variables
pmem_dump_file.write_line("structure_version: 0x" + to_string_hex(data->structure_version, 8));
pmem_dump_file.write_line("target_frequency: " + to_string_dec_int(data->target_frequency));
pmem_dump_file.write_line("correction_ppb: " + to_string_dec_int(data->correction_ppb));
pmem_dump_file.write_line("modem_def_index: " + to_string_dec_uint(data->modem_def_index));
pmem_dump_file.write_line("serial_format.data_bit: " + to_string_dec_uint(data->serial_format.data_bits));
pmem_dump_file.write_line("serial_format.parity: " + to_string_dec_uint(data->serial_format.parity));
pmem_dump_file.write_line("serial_format.stop_bits: " + to_string_dec_uint(data->serial_format.stop_bits));
pmem_dump_file.write_line("serial_format.bit_order: " + to_string_dec_uint(data->serial_format.bit_order));
pmem_dump_file.write_line("modem_bw: " + to_string_dec_int(data->modem_bw));
pmem_dump_file.write_line("afsk_mark_freq: " + to_string_dec_int(data->afsk_mark_freq));
pmem_dump_file.write_line("afsk_space_freq: " + to_string_dec_int(data->afsk_space_freq));
pmem_dump_file.write_line("modem_baudrate: " + to_string_dec_int(data->modem_baudrate));
pmem_dump_file.write_line("modem_repeat: " + to_string_dec_int(data->modem_repeat));
pmem_dump_file.write_line("playdead_magic: " + to_string_dec_uint(data->playdead_magic));
pmem_dump_file.write_line("playing_dead: " + to_string_dec_uint(data->playing_dead));
pmem_dump_file.write_line("playdead_sequence: " + to_string_dec_uint(data->playdead_sequence));
pmem_dump_file.write_line("pocsag_last_address: " + to_string_dec_uint(data->pocsag_last_address));
pmem_dump_file.write_line("pocsag_ignore_address: " + to_string_dec_uint(data->pocsag_ignore_address));
pmem_dump_file.write_line("tone_mix: " + to_string_dec_uint(data->tone_mix));
pmem_dump_file.write_line("hardware_config: " + to_string_dec_uint(data->hardware_config));
pmem_dump_file.write_line("recon_config: 0x" + to_string_hex(data->recon_config, 16));
pmem_dump_file.write_line("converter: " + to_string_dec_int(data->converter));
pmem_dump_file.write_line("updown_converter: " + to_string_dec_int(data->updown_converter));
pmem_dump_file.write_line("updown_frequency_rx_correction: " + to_string_dec_int(data->updown_frequency_rx_correction));
pmem_dump_file.write_line("updown_frequency_tx_correction: " + to_string_dec_int(data->updown_frequency_tx_correction));
// pmem_dump_file.write_line("UNUSED_4: " + to_string_dec_int(data->UNUSED_4));
// pmem_dump_file.write_line("UNUSED_5: " + to_string_dec_int(data->UNUSED_5));
// pmem_dump_file.write_line("UNUSED_6: " + to_string_dec_int(data->UNUSED_6));
// pmem_dump_file.write_line("UNUSED_7: " + to_string_dec_int(data->UNUSED_7));
pmem_dump_file.write_line("converter_frequency_offset: " + to_string_dec_int(data->converter_frequency_offset));
pmem_dump_file.write_line("frequency_rx_correction: " + to_string_dec_uint(data->frequency_rx_correction));
pmem_dump_file.write_line("frequency_tx_correction: " + to_string_dec_uint(data->frequency_tx_correction));
pmem_dump_file.write_line("encoder_dial_sensitivity: " + to_string_dec_uint(data->encoder_dial_sensitivity));
// pmem_dump_file.write_line("UNUSED_8: " + to_string_dec_uint(data->UNUSED_8));
pmem_dump_file.write_line("headphone_volume_cb: " + to_string_dec_int(data->headphone_volume_cb));
// ui_config bits
const auto backlight_timer = portapack::persistent_memory::config_backlight_timer();
pmem_dump_file.write_line("ui_config clkout_freq: " + to_string_dec_uint(clkout_freq()));
pmem_dump_file.write_line("ui_config backlight_timer.timeout_enabled: " + to_string_dec_uint(backlight_timer.timeout_enabled()));
pmem_dump_file.write_line("ui_config backlight_timer.timeout_seconds: " + to_string_dec_uint(backlight_timer.timeout_seconds()));
pmem_dump_file.write_line("ui_config show_gui_return_icon: " + to_string_dec_uint(data->ui_config.show_gui_return_icon));
pmem_dump_file.write_line("ui_config load_app_settings: " + to_string_dec_uint(data->ui_config.load_app_settings));
pmem_dump_file.write_line("ui_config save_app_settings: " + to_string_dec_uint(data->ui_config.save_app_settings));
pmem_dump_file.write_line("ui_config show_bigger_qr_code: " + to_string_dec_uint(data->ui_config.show_large_qr_code));
pmem_dump_file.write_line("ui_config disable_touchscreen: " + to_string_dec_uint(data->ui_config.disable_touchscreen));
pmem_dump_file.write_line("ui_config hide_clock: " + to_string_dec_uint(data->ui_config.hide_clock));
pmem_dump_file.write_line("ui_config clock_with_date: " + to_string_dec_uint(data->ui_config.clock_show_date));
pmem_dump_file.write_line("ui_config clkout_enabled: " + to_string_dec_uint(data->ui_config.clkout_enabled));
pmem_dump_file.write_line("ui_config stealth_mode: " + to_string_dec_uint(data->ui_config.stealth_mode));
pmem_dump_file.write_line("ui_config config_login: " + to_string_dec_uint(data->ui_config.config_login));
pmem_dump_file.write_line("ui_config config_splash: " + to_string_dec_uint(data->ui_config.config_splash));
// ui_config2 bits
pmem_dump_file.write_line("ui_config2 hide_speaker: " + to_string_dec_uint(data->ui_config2.hide_speaker));
pmem_dump_file.write_line("ui_config2 hide_converter: " + to_string_dec_uint(data->ui_config2.hide_converter));
pmem_dump_file.write_line("ui_config2 hide_stealth: " + to_string_dec_uint(data->ui_config2.hide_stealth));
pmem_dump_file.write_line("ui_config2 hide_camera: " + to_string_dec_uint(data->ui_config2.hide_camera));
pmem_dump_file.write_line("ui_config2 hide_sleep: " + to_string_dec_uint(data->ui_config2.hide_sleep));
pmem_dump_file.write_line("ui_config2 hide_bias_tee: " + to_string_dec_uint(data->ui_config2.hide_bias_tee));
pmem_dump_file.write_line("ui_config2 hide_clock: " + to_string_dec_uint(data->ui_config2.hide_clock));
pmem_dump_file.write_line("ui_config2 hide_sd_card: " + to_string_dec_uint(data->ui_config2.hide_sd_card));
pmem_dump_file.write_line("ui_config2 hide_mute: " + to_string_dec_uint(data->ui_config2.hide_mute));
// misc_config bits
pmem_dump_file.write_line("misc_config config_audio_mute: " + to_string_dec_int(config_audio_mute()));
pmem_dump_file.write_line("misc_config config_speaker_disable: " + to_string_dec_int(config_speaker_disable()));
pmem_dump_file.write_line("ui_config config_disable_external_tcxo: " + to_string_dec_uint(config_disable_external_tcxo()));
pmem_dump_file.write_line("ui_config config_sdcard_high_speed_io: " + to_string_dec_uint(config_sdcard_high_speed_io()));
// receiver_model
pmem_dump_file.write_line("\n[Receiver Model]");
pmem_dump_file.write_line("target_frequency: " + to_string_dec_uint(receiver_model.target_frequency()));
pmem_dump_file.write_line("frequency_step: " + to_string_dec_uint(receiver_model.frequency_step()));
pmem_dump_file.write_line("lna: " + to_string_dec_int(receiver_model.lna()));
pmem_dump_file.write_line("vga: " + to_string_dec_int(receiver_model.vga()));
pmem_dump_file.write_line("rf_amp: " + to_string_dec_int(receiver_model.rf_amp()));
pmem_dump_file.write_line("baseband_bandwidth: " + to_string_dec_uint(receiver_model.baseband_bandwidth()));
pmem_dump_file.write_line("sampling_rate: " + to_string_dec_uint(receiver_model.sampling_rate()));
switch (receiver_model.modulation()) {
case ReceiverModel::Mode::AMAudio:
pmem_dump_file.write_line("modulation: Mode::AMAudio");
break;
case ReceiverModel::Mode::NarrowbandFMAudio:
pmem_dump_file.write_line("modulation: Mode::NarrowbandFMAudio");
break;
case ReceiverModel::Mode::WidebandFMAudio:
pmem_dump_file.write_line("modulation: Mode::WidebandFMAudio");
break;
case ReceiverModel::Mode::SpectrumAnalysis:
pmem_dump_file.write_line("modulation: Mode::SpectrumAnalysis");
break;
case ReceiverModel::Mode::Capture:
pmem_dump_file.write_line("modulation: Mode::Capture");
break;
default:
pmem_dump_file.write_line("modulation: !!unknown mode!!");
break;
}
pmem_dump_file.write_line("headphone_volume.centibel: " + to_string_dec_int(receiver_model.headphone_volume().centibel()));
pmem_dump_file.write_line("normalized_headphone_volume: " + to_string_dec_uint(receiver_model.normalized_headphone_volume()));
pmem_dump_file.write_line("am_configuration: " + to_string_dec_uint(receiver_model.am_configuration()));
pmem_dump_file.write_line("nbfm_configuration: " + to_string_dec_uint(receiver_model.nbfm_configuration()));
pmem_dump_file.write_line("wfm_configuration: " + to_string_dec_uint(receiver_model.wfm_configuration()));
// transmitter_model
pmem_dump_file.write_line("\n[Transmitter Model]");
pmem_dump_file.write_line("target_frequency: " + to_string_dec_uint(transmitter_model.target_frequency()));
pmem_dump_file.write_line("rf_amp: " + to_string_dec_int(transmitter_model.rf_amp()));
pmem_dump_file.write_line("baseband_bandwidth: " + to_string_dec_uint(transmitter_model.baseband_bandwidth()));
pmem_dump_file.write_line("sampling_rate: " + to_string_dec_uint(transmitter_model.sampling_rate()));
pmem_dump_file.write_line("tx_gain: " + to_string_dec_int(transmitter_model.tx_gain()));
pmem_dump_file.write_line("channel_bandwidth: " + to_string_dec_uint(transmitter_model.channel_bandwidth()));
// on screen information
painter.draw_string({0, 320 - 16}, ui::Styles::green, filename.filename().string() + " DUMPED !");
return true;
}
} /* namespace persistent_memory */
} /* namespace portapack */