mayhem-firmware/firmware/baseband/w25q80bv.cpp

/*
 * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
 * Copyright (C) 2023 Bernd Herzog
 *
 * This file is part of PortaPack.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */

#include "w25q80bv.hpp"
#include "debug.hpp"

namespace w25q80bv {

void disable_spifi(){
	RESET_CTRL1 = RESET_CTRL1_SPIFI_RST;
}

void initialite_spi(){
	palSetPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);
	palOutputPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	const uint32_t clock_prescale_rate = 2;
	const uint32_t serial_clock_rate = 2;

	SSP_CR1(SSP0_BASE) = 0;
	SSP_CPSR(SSP0_BASE) = clock_prescale_rate;
	SSP_CR0(SSP0_BASE) = (serial_clock_rate << 8) | SSP_DATA_8BITS;
	SSP_CR1(SSP0_BASE) = SSP_ENABLE;
}

void setup() {
	/* Init SPIFI GPIO to Normal GPIO */

	MMIO32(PIN_GROUP3 + PIN3) = (SCU_SSP_IO | SCU_CONF_FUNCTION2);
	MMIO32(PIN_GROUP3 + PIN4) = (SCU_GPIO_FAST | SCU_CONF_FUNCTION0);
	MMIO32(PIN_GROUP3 + PIN5) = (SCU_GPIO_FAST | SCU_CONF_FUNCTION0);
	MMIO32(PIN_GROUP3 + PIN6) = (SCU_GPIO_FAST | SCU_CONF_FUNCTION0);
	MMIO32(PIN_GROUP3 + PIN7) = (SCU_GPIO_FAST | SCU_CONF_FUNCTION4);
	MMIO32(PIN_GROUP3 + PIN8) = (SCU_GPIO_FAST | SCU_CONF_FUNCTION4);

	/* configure SSP pins */
	MMIO32(SCU_SSP0_CIPO) =  (SCU_SSP_IO | SCU_CONF_FUNCTION5);
	MMIO32(SCU_SSP0_COPI) =  (SCU_SSP_IO | SCU_CONF_FUNCTION5);
	MMIO32(SCU_SSP0_SCK) = (SCU_SSP_IO | SCU_CONF_FUNCTION2);

	/* configure GPIO pins */
	MMIO32(SCU_FLASH_HOLD) = SCU_GPIO_FAST;
	MMIO32(SCU_FLASH_WP) = SCU_GPIO_FAST;
	MMIO32(SCU_SSP0_CS) = (SCU_GPIO_FAST | SCU_CONF_FUNCTION4);

	//remove hardware write protection
	/* drive CS, HOLD, and WP pins high */
	palSetPad(W25Q80BV_HOLD_PORT, W25Q80BV_HOLD_PAD);
	palSetPad(W25Q80BV_WP_PORT, W25Q80BV_WP_PAD);

	/* Set GPIO pins as outputs. */
	palOutputPad(W25Q80BV_HOLD_PORT, W25Q80BV_HOLD_PAD);
	palOutputPad(W25Q80BV_WP_PORT, W25Q80BV_WP_PAD);
}

void wait_for_device() {
	uint8_t device_id;
	do {
		device_id = get_device_id();
	} while (device_id != W25Q80BV_DEVICE_ID_RES &&
		 device_id != W25Q16DV_DEVICE_ID_RES);
}

void wait_not_busy() {
	while (get_status() & W25Q80BV_STATUS_BUSY) {HALT_IF_DEBUGGING();}
}

void remove_write_protection() {
	uint8_t data[] = {W25Q80BV_WRITE_ENABLE};
	palClearPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	for (size_t j = 0; j < 1; j++) {
		data[j] = spi_ssp_transfer_word(data[j]);
	}

	palSetPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	while (!(get_status() & W25Q80BV_STATUS_WEL)) {HALT_IF_DEBUGGING();}
}

uint32_t spi_ssp_transfer_word(const uint32_t data) {
	while ((SSP_SR(SSP0_BASE) & SSP_SR_TNF) == 0) {HALT_IF_DEBUGGING();}
	SSP_DR(SSP0_BASE) = data;
	while (SSP_SR(SSP0_BASE) & SSP_SR_BSY) {HALT_IF_DEBUGGING();}
	while ((SSP_SR(SSP0_BASE) & SSP_SR_RNE) == 0) {HALT_IF_DEBUGGING();}
	return SSP_DR(SSP0_BASE);
}

uint8_t get_status() {
	uint8_t data[] = {W25Q80BV_READ_STATUS1, 0xFF};
	palClearPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	for (size_t j = 0; j < 2; j++) {
		data[j] = spi_ssp_transfer_word(data[j]);
	}

 	palSetPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	return data[1];
}

uint8_t get_device_id() {
	uint8_t data[] = {W25Q80BV_DEVICE_ID, 0xFF, 0xFF, 0xFF, 0xFF};
	palClearPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	for (size_t j = 0; j < 5; j++) {
		data[j] = spi_ssp_transfer_word(data[j]);
	}

	palSetPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	return data[4];
}

void erase_chip() {
	uint8_t data[] = {W25Q80BV_CHIP_ERASE};
	palClearPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);

	for (size_t j = 0; j < 1; j++) {
		data[j] = spi_ssp_transfer_word(data[j]);
	}

	palSetPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);
}

void write(size_t page_index, uint8_t *data_buffer, size_t length) {
	size_t page_len = 256U;
	size_t addr = page_index * page_len;
	uint8_t header[] = {
		W25Q80BV_PAGE_PROGRAM,
		(uint8_t)((addr & 0xFF0000) >> 16),
		(uint8_t)((addr & 0xFF00) >> 8),
		(uint8_t)(addr & 0xFF)
	};

	palClearPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);
	for (size_t j = 0; j < 4; j++) {
		header[j] = spi_ssp_transfer_word(header[j]);
	}

	for (size_t j = 0; j < length; j++) {
		data_buffer[j] = spi_ssp_transfer_word(data_buffer[j]);
	}
	palSetPad(W25Q80BV_SELECT_PORT, W25Q80BV_SELECT_PAD);
}
}