mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2025-08-23 14:57:29 +00:00
ChibiOS 2.6.8, until I can figure out where to get it from git.
This commit is contained in:
22
firmware/chibios/demos/AVR-ArduinoMega-GCC/readme.txt
Executable file
22
firmware/chibios/demos/AVR-ArduinoMega-GCC/readme.txt
Executable file
@@ -0,0 +1,22 @@
|
||||
*****************************************************************************
|
||||
** ChibiOS/RT port for Atmel AVR ATmega1280. **
|
||||
*****************************************************************************
|
||||
|
||||
** TARGET **
|
||||
|
||||
The demo runs on an Arduino Mega board.
|
||||
|
||||
** The Demo **
|
||||
|
||||
The demo currently just prints the TestThread output on Serial0, which is
|
||||
available on the board USB connector (FT232 converter), and toggles the LED
|
||||
on PB7 (pin 13 on Arduino IDE) every second.
|
||||
|
||||
** Build Procedure **
|
||||
|
||||
The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
|
||||
|
||||
** Notes **
|
||||
|
||||
This demo runs natively so the Arduino bootloader must be removed and the FUSEs
|
||||
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
|
Reference in New Issue
Block a user