mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2025-08-23 14:57:29 +00:00
ChibiOS 2.6.8, until I can figure out where to get it from git.
This commit is contained in:
Jared Boone
394
firmware/chibios/os/hal/platforms/STM32F0xx/stm32_dma.h
Executable file
394
firmware/chibios/os/hal/platforms/STM32F0xx/stm32_dma.h
Executable file
@@ -0,0 +1,394 @@
|
||||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file STM32F0xx/stm32_dma.h
|
||||
* @brief DMA helper driver header.
|
||||
* @note This file requires definitions from the ST header file stm32f0xx.h.
|
||||
* @note This driver uses the new naming convention used for the STM32F2xx
|
||||
* so the "DMA channels" are referred as "DMA streams".
|
||||
*
|
||||
* @addtogroup STM32F0xx_DMA
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _STM32_DMA_H_
|
||||
#define _STM32_DMA_H_
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver constants. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Total number of DMA streams.
|
||||
* @note This is the total number of streams among all the DMA units.
|
||||
*/
|
||||
#define STM32_DMA_STREAMS 5
|
||||
|
||||
/**
|
||||
* @brief Mask of the ISR bits passed to the DMA callback functions.
|
||||
*/
|
||||
#define STM32_DMA_ISR_MASK 0x0F
|
||||
|
||||
/**
|
||||
* @brief Returns the channel associated to the specified stream.
|
||||
*
|
||||
* @param[in] n the stream number (0...STM32_DMA_STREAMS-1)
|
||||
* @param[in] c a stream/channel association word, one channel per
|
||||
* nibble, not associated channels must be set to 0xF
|
||||
* @return Always zero, in this platform there is no dynamic
|
||||
* association between streams and channels.
|
||||
*/
|
||||
#define STM32_DMA_GETCHANNEL(n, c) 0
|
||||
|
||||
/**
|
||||
* @brief Checks if a DMA priority is within the valid range.
|
||||
* @param[in] prio DMA priority
|
||||
*
|
||||
* @retval The check result.
|
||||
* @retval FALSE invalid DMA priority.
|
||||
* @retval TRUE correct DMA priority.
|
||||
*/
|
||||
#define STM32_DMA_IS_VALID_PRIORITY(prio) (((prio) >= 0) && ((prio) <= 3))
|
||||
|
||||
/**
|
||||
* @brief Returns an unique numeric identifier for a DMA stream.
|
||||
*
|
||||
* @param[in] dma the DMA unit number
|
||||
* @param[in] stream the stream number
|
||||
* @return An unique numeric stream identifier.
|
||||
*/
|
||||
#define STM32_DMA_STREAM_ID(dma, stream) ((stream) - 1)
|
||||
|
||||
/**
|
||||
* @brief Returns a DMA stream identifier mask.
|
||||
*
|
||||
*
|
||||
* @param[in] dma the DMA unit number
|
||||
* @param[in] stream the stream number
|
||||
* @return A DMA stream identifier mask.
|
||||
*/
|
||||
#define STM32_DMA_STREAM_ID_MSK(dma, stream) \
|
||||
(1 << STM32_DMA_STREAM_ID(dma, stream))
|
||||
|
||||
/**
|
||||
* @brief Checks if a DMA stream unique identifier belongs to a mask.
|
||||
* @param[in] id the stream numeric identifier
|
||||
* @param[in] mask the stream numeric identifiers mask
|
||||
*
|
||||
* @retval The check result.
|
||||
* @retval FALSE id does not belong to the mask.
|
||||
* @retval TRUE id belongs to the mask.
|
||||
*/
|
||||
#define STM32_DMA_IS_VALID_ID(id, mask) (((1 << (id)) & (mask)))
|
||||
|
||||
/**
|
||||
* @name DMA streams identifiers
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Returns a pointer to a stm32_dma_stream_t structure.
|
||||
*
|
||||
* @param[in] id the stream numeric identifier
|
||||
* @return A pointer to the stm32_dma_stream_t constant structure
|
||||
* associated to the DMA stream.
|
||||
*/
|
||||
#define STM32_DMA_STREAM(id) (&_stm32_dma_streams[id])
|
||||
|
||||
#define STM32_DMA1_STREAM1 STM32_DMA_STREAM(0)
|
||||
#define STM32_DMA1_STREAM2 STM32_DMA_STREAM(1)
|
||||
#define STM32_DMA1_STREAM3 STM32_DMA_STREAM(2)
|
||||
#define STM32_DMA1_STREAM4 STM32_DMA_STREAM(3)
|
||||
#define STM32_DMA1_STREAM5 STM32_DMA_STREAM(4)
|
||||
/** @} */
|
||||
|
||||
/**
|
||||
* @name CR register constants common to all DMA types
|
||||
* @{
|
||||
*/
|
||||
#define STM32_DMA_CR_EN DMA_CCR_EN
|
||||
#define STM32_DMA_CR_TEIE DMA_CCR_TEIE
|
||||
#define STM32_DMA_CR_HTIE DMA_CCR_HTIE
|
||||
#define STM32_DMA_CR_TCIE DMA_CCR_TCIE
|
||||
#define STM32_DMA_CR_DIR_MASK (DMA_CCR_DIR | DMA_CCR_MEM2MEM)
|
||||
#define STM32_DMA_CR_DIR_P2M 0
|
||||
#define STM32_DMA_CR_DIR_M2P DMA_CCR_DIR
|
||||
#define STM32_DMA_CR_DIR_M2M DMA_CCR_MEM2MEM
|
||||
#define STM32_DMA_CR_CIRC DMA_CCR_CIRC
|
||||
#define STM32_DMA_CR_PINC DMA_CCR_PINC
|
||||
#define STM32_DMA_CR_MINC DMA_CCR_MINC
|
||||
#define STM32_DMA_CR_PSIZE_MASK DMA_CCR_PSIZE
|
||||
#define STM32_DMA_CR_PSIZE_BYTE 0
|
||||
#define STM32_DMA_CR_PSIZE_HWORD DMA_CCR_PSIZE_0
|
||||
#define STM32_DMA_CR_PSIZE_WORD DMA_CCR_PSIZE_1
|
||||
#define STM32_DMA_CR_MSIZE_MASK DMA_CCR_MSIZE
|
||||
#define STM32_DMA_CR_MSIZE_BYTE 0
|
||||
#define STM32_DMA_CR_MSIZE_HWORD DMA_CCR_MSIZE_0
|
||||
#define STM32_DMA_CR_MSIZE_WORD DMA_CCR_MSIZE_1
|
||||
#define STM32_DMA_CR_SIZE_MASK (STM32_DMA_CR_PSIZE_MASK | \
|
||||
STM32_DMA_CR_MSIZE_MASK)
|
||||
#define STM32_DMA_CR_PL_MASK DMA_CCR_PL
|
||||
#define STM32_DMA_CR_PL(n) ((n) << 12)
|
||||
/** @} */
|
||||
|
||||
/**
|
||||
* @name CR register constants only found in enhanced DMA
|
||||
* @{
|
||||
*/
|
||||
#define STM32_DMA_CR_DMEIE 0 /**< @brief Ignored by normal DMA. */
|
||||
#define STM32_DMA_CR_CHSEL_MASK 0 /**< @brief Ignored by normal DMA. */
|
||||
#define STM32_DMA_CR_CHSEL(n) 0 /**< @brief Ignored by normal DMA. */
|
||||
/** @} */
|
||||
|
||||
/**
|
||||
* @name Status flags passed to the ISR callbacks
|
||||
* @{
|
||||
*/
|
||||
#define STM32_DMA_ISR_FEIF 0
|
||||
#define STM32_DMA_ISR_DMEIF 0
|
||||
#define STM32_DMA_ISR_TEIF DMA_ISR_TEIF1
|
||||
#define STM32_DMA_ISR_HTIF DMA_ISR_HTIF1
|
||||
#define STM32_DMA_ISR_TCIF DMA_ISR_TCIF1
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver pre-compile time settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Derived constants and error checks. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver data structures and types. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief STM32 DMA stream descriptor structure.
|
||||
*/
|
||||
typedef struct {
|
||||
DMA_Channel_TypeDef *channel; /**< @brief Associated DMA channel. */
|
||||
volatile uint32_t *ifcr; /**< @brief Associated IFCR reg. */
|
||||
uint8_t ishift; /**< @brief Bits offset in xIFCR
|
||||
register. */
|
||||
uint8_t selfindex; /**< @brief Index to self in array. */
|
||||
uint8_t vector; /**< @brief Associated IRQ vector. */
|
||||
} stm32_dma_stream_t;
|
||||
|
||||
/**
|
||||
* @brief STM32 DMA ISR function type.
|
||||
*
|
||||
* @param[in] p parameter for the registered function
|
||||
* @param[in] flags pre-shifted content of the ISR register, the bits
|
||||
* are aligned to bit zero
|
||||
*/
|
||||
typedef void (*stm32_dmaisr_t)(void *p, uint32_t flags);
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver macros. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @name Macro Functions
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief Associates a peripheral data register to a DMA stream.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
* @param[in] addr value to be written in the CPAR register
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamSetPeripheral(dmastp, addr) { \
|
||||
(dmastp)->channel->CPAR = (uint32_t)(addr); \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Associates a memory destination to a DMA stream.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
* @param[in] addr value to be written in the CMAR register
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamSetMemory0(dmastp, addr) { \
|
||||
(dmastp)->channel->CMAR = (uint32_t)(addr); \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets the number of transfers to be performed.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
* @param[in] size value to be written in the CNDTR register
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamSetTransactionSize(dmastp, size) { \
|
||||
(dmastp)->channel->CNDTR = (uint32_t)(size); \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the number of transfers to be performed.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
* @return The number of transfers to be performed.
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamGetTransactionSize(dmastp) ((size_t)((dmastp)->channel->CNDTR))
|
||||
|
||||
/**
|
||||
* @brief Programs the stream mode settings.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
* @param[in] mode value to be written in the CCR register
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamSetMode(dmastp, mode) { \
|
||||
(dmastp)->channel->CCR = (uint32_t)(mode); \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DMA stream enable.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamEnable(dmastp) { \
|
||||
(dmastp)->channel->CCR |= STM32_DMA_CR_EN; \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DMA stream disable.
|
||||
* @details The function disables the specified stream and then clears any
|
||||
* pending interrupt.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @note Interrupts enabling flags are set to zero after this call, see
|
||||
* bug 3607518.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamDisable(dmastp) { \
|
||||
(dmastp)->channel->CCR &= ~(STM32_DMA_CR_TCIE | STM32_DMA_CR_HTIE | \
|
||||
STM32_DMA_CR_TEIE | STM32_DMA_CR_EN); \
|
||||
dmaStreamClearInterrupt(dmastp); \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DMA stream interrupt sources clear.
|
||||
* @note This function can be invoked in both ISR or thread context.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
*
|
||||
* @special
|
||||
*/
|
||||
#define dmaStreamClearInterrupt(dmastp) { \
|
||||
*(dmastp)->ifcr = STM32_DMA_ISR_MASK << (dmastp)->ishift; \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Starts a memory to memory operation using the specified stream.
|
||||
* @note The default transfer data mode is "byte to byte" but it can be
|
||||
* changed by specifying extra options in the @p mode parameter.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
* @param[in] mode value to be written in the CCR register, this value
|
||||
* is implicitly ORed with:
|
||||
* - @p STM32_DMA_CR_MINC
|
||||
* - @p STM32_DMA_CR_PINC
|
||||
* - @p STM32_DMA_CR_DIR_M2M
|
||||
* - @p STM32_DMA_CR_EN
|
||||
* .
|
||||
* @param[in] src source address
|
||||
* @param[in] dst destination address
|
||||
* @param[in] n number of data units to copy
|
||||
*/
|
||||
#define dmaStartMemCopy(dmastp, mode, src, dst, n) { \
|
||||
dmaStreamSetPeripheral(dmastp, src); \
|
||||
dmaStreamSetMemory0(dmastp, dst); \
|
||||
dmaStreamSetTransactionSize(dmastp, n); \
|
||||
dmaStreamSetMode(dmastp, (mode) | \
|
||||
STM32_DMA_CR_MINC | STM32_DMA_CR_PINC | \
|
||||
STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_EN); \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Polled wait for DMA transfer end.
|
||||
* @pre The stream must have been allocated using @p dmaStreamAllocate().
|
||||
* @post After use the stream can be released using @p dmaStreamRelease().
|
||||
*
|
||||
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
|
||||
*/
|
||||
#define dmaWaitCompletion(dmastp) { \
|
||||
while ((dmastp)->channel->CNDTR > 0) \
|
||||
; \
|
||||
dmaStreamDisable(dmastp); \
|
||||
}
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* External declarations. */
|
||||
/*===========================================================================*/
|
||||
|
||||
#if !defined(__DOXYGEN__)
|
||||
extern const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS];
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void dmaInit(void);
|
||||
bool_t dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
|
||||
uint32_t priority,
|
||||
stm32_dmaisr_t func,
|
||||
void *param);
|
||||
void dmaStreamRelease(const stm32_dma_stream_t *dmastp);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* _STM32_DMA_H_ */
|
||||
|
||||
/** @} */
|
||||
Reference in New Issue
Block a user