diff --git a/firmware/application/apps/soundboard_app.cpp b/firmware/application/apps/soundboard_app.cpp
index 4682d985..2c93822f 100644
--- a/firmware/application/apps/soundboard_app.cpp
+++ b/firmware/application/apps/soundboard_app.cpp
@@ -110,7 +110,11 @@ void SoundBoardView::start_tx(const uint32_t id) {
 		1536000 / 20,		// Update vu-meter at 20Hz
 		transmitter_model.channel_bandwidth(),
 		0,	// Gain is unused
-		TONES_F2D(tone_key_frequency(tone_key_index), 1536000)
+		TONES_F2D(tone_key_frequency(tone_key_index), 1536000),
+		0, //AM
+		0, //DSB
+		0, //USB
+		0 //LSB
 	);
 	baseband::set_sample_rate(sample_rate);
 	
diff --git a/firmware/application/apps/ui_mictx.cpp b/firmware/application/apps/ui_mictx.cpp
index 82e66408..0e2c9c47 100644
--- a/firmware/application/apps/ui_mictx.cpp
+++ b/firmware/application/apps/ui_mictx.cpp
@@ -65,8 +65,13 @@ void MicTXView::configure_baseband() {
 		sampling_rate / 20,		// Update vu-meter at 20Hz
 		transmitting ? transmitter_model.channel_bandwidth() : 0,
 		mic_gain,
-		TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate)
+		TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate),
+		enable_am,
+		enable_dsb,
+		enable_usb,
+		enable_lsb
 	);
+
 }
 
 void MicTXView::set_tx(bool enable) {
@@ -143,8 +148,20 @@ void MicTXView::rxaudio(bool is_on) {
 	if (is_on) {
 		audio::input::stop();
 		baseband::shutdown();
-		baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
-		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+		
+		if (enable_am || enable_usb || enable_lsb || enable_dsb) {
+			baseband::run_image(portapack::spi_flash::image_tag_am_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::AMAudio);	
+			if (options_mode.selected_index() < 4)
+				receiver_model.set_am_configuration(options_mode.selected_index() - 1);
+			else
+				receiver_model.set_am_configuration(0);
+		}
+		else {
+			baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+			
+		}
 		receiver_model.set_sampling_rate(3072000);
 		receiver_model.set_baseband_bandwidth(1750000);	
 //		receiver_model.set_tuning_frequency(field_frequency.value()); //probably this too can be commented out.
@@ -155,15 +172,15 @@ void MicTXView::rxaudio(bool is_on) {
 		receiver_model.enable();
 		audio::output::start();
 	} else {	//These incredibly convoluted steps are required for the vumeter to reappear when stopping RX.
+		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); //This fixes something with AM RX...
 		receiver_model.disable();
 		baseband::shutdown();
+
 		baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
-		audio::input::start();
-//		transmitter_model.enable();		
+		audio::output::stop();
+		audio::input::start();	
 		portapack::pin_i2s0_rx_sda.mode(3);
-//		transmitting = false;
 		configure_baseband();
-//		transmitter_model.disable();
 	}
 }
 
@@ -198,11 +215,13 @@ MicTXView::MicTXView(
 		&field_bw,
 		&field_rfgain,
 		&field_rfamp,
+		&options_mode,
 		&field_frequency,
 		&options_tone_key,
 		&check_rogerbeep,
 		&check_rxactive,
 		&field_volume,
+		&field_rxbw,
 		&field_squelch,
 		&field_rxfrequency,
 		&field_rxlna,
@@ -262,6 +281,42 @@ MicTXView::MicTXView(
 	};
 	field_rfamp.set_value(rf_amp ? 14 : 0);
 	
+	options_mode.on_change = [this](size_t, int32_t v) {
+		enable_am = false;
+		enable_usb = false;
+		enable_lsb = false;
+		enable_dsb = false;
+		switch(v) {
+			case 0:
+				enable_am = false;
+				enable_usb = false;
+				enable_lsb = false;
+				enable_dsb = false;
+				field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
+				//if (rx_enabled)
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 1:
+				enable_am = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 2:
+				enable_usb = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 3:
+				enable_lsb = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 4:
+				enable_dsb = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+		}
+		//configure_baseband();
+	};
+	
+	
 	/*
 	check_va.on_select = [this](Checkbox&, bool v) {
 		va_enabled = v;
@@ -331,6 +386,21 @@ MicTXView::MicTXView(
 	field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
 	field_volume.on_change = [this](int32_t v) { this->on_headphone_volume_changed(v);	};
 
+	field_rxbw.on_change = [this](size_t, int32_t v) {
+		switch(v) {
+			case 0:
+				receiver_model.set_nbfm_configuration(0);
+				break;
+			case 1:
+				receiver_model.set_nbfm_configuration(1);
+				break;
+			case 2:
+				receiver_model.set_nbfm_configuration(2);
+				break;
+		}
+	};
+	field_rxbw.set_selected_index(2);
+
 	field_squelch.on_change = [this](int32_t v) { 
 		receiver_model.set_squelch_level(100 - v);	
 	};
diff --git a/firmware/application/apps/ui_mictx.cpp.1 b/firmware/application/apps/ui_mictx.cpp.1
new file mode 100644
index 00000000..9476584b
--- /dev/null
+++ b/firmware/application/apps/ui_mictx.cpp.1
@@ -0,0 +1,526 @@
+/*
+ * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
+ * Copyright (C) 2016 Furrtek
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "ui_mictx.hpp"
+
+#include "baseband_api.hpp"
+#include "audio.hpp"
+#include "tonesets.hpp"
+#include "portapack_hal.hpp"
+#include "string_format.hpp"
+#include "irq_controls.hpp"
+
+
+#include <cstring>
+
+using namespace tonekey;
+using namespace portapack;
+
+namespace ui {
+
+void MicTXView::focus() {
+	switch(focused_ui) {
+		case 0:
+			field_frequency.focus();
+			break;
+		case 1:
+			field_rxfrequency.focus();
+			break;
+		default:
+			//field_va.focus();
+			tx_button.focus();
+			break;
+	}	
+}
+
+void MicTXView::update_vumeter() {
+	vumeter.set_value(audio_level);
+}
+
+void MicTXView::on_tx_progress(const bool done) {
+	// Roger beep played, stop transmitting
+	if (done)
+		set_tx(false);
+}
+
+void MicTXView::configure_baseband() {
+	baseband::set_audiotx_config(
+		sampling_rate / 20,		// Update vu-meter at 20Hz
+		transmitting ? transmitter_model.channel_bandwidth() : 0,
+		mic_gain,
+		TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate),
+		enable_am,
+		am_carrier_lvl,
+		0,
+		enable_usb,
+		enable_lsb
+	);
+
+}
+
+void MicTXView::set_tx(bool enable) {
+	if (enable) {
+		if (rx_enabled)  //If audio RX is enabled
+			rxaudio(false); //Then turn off audio RX
+		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); // Weird workaround for FM TX
+		transmitting = true;
+		configure_baseband();
+		transmitter_model.set_tuning_frequency(tx_frequency);
+		transmitter_model.set_tx_gain(tx_gain);
+		transmitter_model.set_rf_amp(rf_amp);
+		transmitter_model.enable();
+		portapack::pin_i2s0_rx_sda.mode(3);		// This is already done in audio::init but gets changed by the CPLD overlay reprogramming
+	} else {
+		if (transmitting && rogerbeep_enabled) {
+			baseband::request_beep();	//Transmit the roger beep
+			transmitting = false;		//And flag the end of the transmission so ...
+		} else { // (if roger beep was enabled, this will be executed after the beep ends transmitting.
+			transmitting = false;
+			configure_baseband();
+			transmitter_model.disable();
+			if (rx_enabled)  //If audio RX is enabled and we've been transmitting
+				rxaudio(true); //Turn back on audio RX
+		}
+	}
+}
+
+void MicTXView::do_timing() {
+	if (va_enabled) {
+		if (!transmitting) {
+			// Attack
+			if (audio_level >= va_level) {
+				if ((attack_timer >> 8) >= attack_ms) {
+					decay_timer = 0;
+					attack_timer = 0;
+					set_tx(true);
+				} else {
+					attack_timer += lcd_frame_duration;
+				}
+			} else {
+				attack_timer = 0;
+			}
+		} else {
+			// Decay
+			if (audio_level < va_level) {
+				if ((decay_timer >> 8) >= decay_ms) {
+					decay_timer = 0;
+					attack_timer = 0;
+					set_tx(false);
+				} else {
+					decay_timer += lcd_frame_duration;
+				}
+			} else {
+				decay_timer = 0;
+			}
+		}
+	} else {
+		// Check for PTT release
+		const auto switches_state = get_switches_state();
+		if (!switches_state[4] && transmitting && !button_touch)		// Select button
+			set_tx(false);
+	}
+}
+
+/* Hmmmm. Maybe useless now.
+void MicTXView::on_tuning_frequency_changed(rf::Frequency f) {
+	transmitter_model.set_tuning_frequency(f);
+	//if ( rx_enabled )
+		receiver_model.set_tuning_frequency(f); //Update freq also for RX
+}
+*/
+
+void MicTXView::rxaudio(bool is_on) {
+	if (is_on) {
+		audio::input::stop();
+		baseband::shutdown();
+		
+		if (enable_am || enable_usb || enable_lsb) {
+			baseband::run_image(portapack::spi_flash::image_tag_am_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::AMAudio);	
+			if (options_mode.selected_index() < 4)
+				receiver_model.set_am_configuration(options_mode.selected_index() - 1);
+			else
+				receiver_model.set_am_configuration(0);
+		}
+		else {
+			baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+			
+		}
+		receiver_model.set_sampling_rate(3072000);
+		receiver_model.set_baseband_bandwidth(1750000);	
+//		receiver_model.set_tuning_frequency(field_frequency.value()); //probably this too can be commented out.
+		receiver_model.set_tuning_frequency(rx_frequency); // Now with seperate controls!
+		receiver_model.set_lna(rx_lna);
+		receiver_model.set_vga(rx_vga);
+		receiver_model.set_rf_amp(rx_amp);
+		receiver_model.enable();
+		audio::output::start();
+	} else {	//These incredibly convoluted steps are required for the vumeter to reappear when stopping RX.
+		//baseband::run_image(portapack::spi_flash::image_tag_nfm_audio); //There is something seriously wrong if these two lines fixes the issue with AM TX...
+		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+		receiver_model.disable();
+		baseband::shutdown();
+
+		baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
+		audio::output::stop();
+		audio::input::start();
+//		transmitter_model.enable();		
+		portapack::pin_i2s0_rx_sda.mode(3);
+//		transmitting = false;
+		configure_baseband();
+//		transmitter_model.disable();
+	}
+}
+
+void MicTXView::on_headphone_volume_changed(int32_t v) {
+	//if (rx_enabled) {
+		const auto new_volume = volume_t::decibel(v - 99) + audio::headphone::volume_range().max;
+		receiver_model.set_headphone_volume(new_volume);
+	//}
+}
+
+void MicTXView::set_ptt_visibility(bool v) {
+	tx_button.hidden(!v);
+}
+
+MicTXView::MicTXView(
+	NavigationView& nav
+)
+{
+	portapack::pin_i2s0_rx_sda.mode(3);		// This is already done in audio::init but gets changed by the CPLD overlay reprogramming
+	
+	baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
+	
+
+	
+	add_children({
+		&labels,
+		&vumeter,
+		&options_gain,
+//		&check_va,
+		&field_va,
+		&field_rxbw,
+		&field_va_level,
+		&field_va_attack,
+		&field_va_decay,
+//		&field_carrier,
+		&field_bw,
+		&field_rfgain,
+		&field_rfamp,
+		&field_frequency,
+		&options_tone_key,
+		&options_mode,
+		&check_rogerbeep,
+		&check_rxactive,
+		&field_volume,
+		&field_squelch,
+		&field_rxfrequency,
+		&field_rxlna,
+		&field_rxvga,
+		&field_rxamp,
+		&tx_button
+	});
+
+
+
+	tone_keys_populate(options_tone_key);
+	options_tone_key.on_change = [this](size_t i, int32_t) {
+		tone_key_index = i;
+	};
+	options_tone_key.set_selected_index(0);
+	
+	options_gain.on_change = [this](size_t, int32_t v) {
+		mic_gain = v / 10.0;
+		configure_baseband();
+	};
+	options_gain.set_selected_index(1);		// x1.0
+	
+	options_mode.on_change = [this](size_t, int32_t v) {
+		enable_am = false;
+		enable_usb = false;
+		enable_lsb = false;
+		switch(v) {
+			case 0:
+				enable_am = false;
+				enable_usb = false;
+				enable_lsb = false;
+				field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 1:
+				enable_am = true;
+				am_carrier_lvl = 20;
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 2:
+				enable_am = true;
+				enable_usb = true;
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 3:
+				enable_am = true;
+				enable_lsb = true;
+				
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 4:
+				enable_usb = false;
+				enable_lsb = false;
+				enable_am = true;
+				am_carrier_lvl = 0;
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+		}
+		//configure_baseband();
+	};
+	
+	tx_frequency = transmitter_model.tuning_frequency();
+	field_frequency.set_value(transmitter_model.tuning_frequency());
+	field_frequency.set_step(receiver_model.frequency_step());
+	field_frequency.on_change = [this](rf::Frequency f) {
+		tx_frequency = f;
+		if(!rx_enabled)
+			transmitter_model.set_tuning_frequency(f);
+	};
+	field_frequency.on_edit = [this, &nav]() {
+		focused_ui = 0;
+		// TODO: Provide separate modal method/scheme?
+		auto new_view = nav.push<FrequencyKeypadView>(tx_frequency);
+		new_view->on_changed = [this](rf::Frequency f) {
+			tx_frequency = f;
+			if(!rx_enabled)
+				transmitter_model.set_tuning_frequency(f);
+			this->field_frequency.set_value(f);
+			set_dirty();
+		};
+	};
+	
+	field_rxbw.on_change = [this](size_t, int32_t v) {
+		switch(v) {
+			case 0:
+				receiver_model.set_nbfm_configuration(0);
+				break;
+			case 1:
+				receiver_model.set_nbfm_configuration(1);
+				break;
+			case 2:
+				receiver_model.set_nbfm_configuration(2);
+				break;
+		}
+	};
+	field_rxbw.set_selected_index(2);
+	
+	field_bw.on_change = [this](uint32_t v) {
+		transmitter_model.set_channel_bandwidth(v * 1000);
+	};
+	field_bw.set_value(10);
+	
+//	field_carrier.on_change = [this](uint32_t v) {
+//		am_carrier_lvl = v;
+//	};
+//	field_carrier.set_value(am_carrier_lvl);
+		tx_gain = transmitter_model.tx_gain();
+		
+	field_rfgain.on_change = [this](int32_t v) {
+		tx_gain = v;
+		
+	};
+	
+	field_rfgain.set_value(tx_gain);
+
+	rf_amp = transmitter_model.rf_amp();
+	field_rfamp.on_change = [this](int32_t v) {
+		rf_amp = (bool)v;
+	};
+	field_rfamp.set_value(rf_amp ? 14 : 0);
+	
+/*	
+	check_va.on_select = [this](Checkbox&, bool v) {
+		va_enabled = v;
+		text_ptt.hidden(v);			//hide / show PTT text
+		check_rxactive.hidden(v); 	//hide / show the RX AUDIO
+		set_dirty();				//Refresh display
+	}; */
+	
+	field_va.set_selected_index(1);
+	field_va.on_change = [this](size_t, int32_t v) {
+		switch(v) {
+			case 0:
+				va_enabled = 0;
+				this->set_ptt_visibility(0);
+				check_rxactive.hidden(0);
+				ptt_enabled = 0;
+				break;
+			case 1:
+				va_enabled = 0;
+				this->set_ptt_visibility(1);
+				check_rxactive.hidden(0);
+				ptt_enabled = 1;
+				break;
+			case 2:
+				if (!rx_enabled) {
+					va_enabled = 1;
+					this->set_ptt_visibility(0);
+					check_rxactive.hidden(1);
+					ptt_enabled = 0;
+				} else {
+					field_va.set_selected_index(1);
+				}
+				break;
+		}
+		set_dirty();
+	};
+
+	check_rogerbeep.on_select = [this](Checkbox&, bool v) {
+		rogerbeep_enabled = v;
+	};
+
+	field_va_level.on_change = [this](int32_t v) {
+		va_level = v;
+		vumeter.set_mark(v);
+	};
+	field_va_level.set_value(40);
+	
+	field_va_attack.on_change = [this](int32_t v) {
+		attack_ms = v;
+	};
+	field_va_attack.set_value(500);
+	
+	field_va_decay.on_change = [this](int32_t v) {
+		decay_ms = v;
+	};
+	field_va_decay.set_value(1000);
+
+	check_rxactive.on_select = [this](Checkbox&, bool v) {
+//		vumeter.set_value(0);	//Start with a clean vumeter
+		rx_enabled = v;
+//		check_va.hidden(v); 	//Hide or show voice activation
+		rxaudio(v);				//Activate-Deactivate audio rx accordingly
+		set_dirty();			//Refresh interface
+	};
+	
+
+	
+	//field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
+	field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
+	field_volume.on_change = [this](int32_t v) { this->on_headphone_volume_changed(v);	};
+
+	field_squelch.on_change = [this](int32_t v) { 
+		receiver_model.set_squelch_level(100 - v);	
+	};
+	field_squelch.set_value(0);
+	receiver_model.set_squelch_level(0);
+
+	rx_frequency = receiver_model.tuning_frequency();
+	field_rxfrequency.set_value(rx_frequency);
+	field_rxfrequency.set_step(receiver_model.frequency_step());
+	
+	field_rxfrequency.on_change = [this](rf::Frequency f) {
+		rx_frequency = f;
+		if(rx_enabled)
+			receiver_model.set_tuning_frequency(f);
+	};
+	field_rxfrequency.on_edit = [this, &nav]() {
+		focused_ui = 1;
+		// TODO: Provide separate modal method/scheme?
+		auto new_view = nav.push<FrequencyKeypadView>(rx_frequency);
+		new_view->on_changed = [this](rf::Frequency f) {
+			rx_frequency = f;
+			if(rx_enabled)
+				receiver_model.set_tuning_frequency(f);
+			this->field_rxfrequency.set_value(f);
+			set_dirty();
+		};
+	};
+
+	
+	rx_lna = receiver_model.lna();
+	field_rxlna.on_change = [this](int32_t v) {
+		rx_lna = v;
+		if(rx_enabled)
+			receiver_model.set_lna(v);
+	};
+	field_rxlna.set_value(rx_lna);
+
+	rx_vga = receiver_model.vga();
+	field_rxvga.on_change = [this](int32_t v) {
+		rx_vga = v;
+		if(rx_enabled)
+			receiver_model.set_vga(v);
+	};
+	field_rxvga.set_value(rx_vga);
+
+	rx_amp = receiver_model.rf_amp();
+
+	field_rxamp.on_change = [this](int32_t v) {
+		rx_amp = v;
+		if(rx_enabled)
+			receiver_model.set_rf_amp(rx_amp);
+	};
+	field_rxamp.set_value(rx_amp);
+	receiver_model.set_rf_amp(rx_amp);
+
+	tx_button.on_select = [this](Button&) {
+		if(ptt_enabled && !transmitting) {
+			set_tx(true);
+		}
+	};
+
+	tx_button.on_touch_release = [this](Button&) {
+		if(button_touch) {
+			button_touch = false;
+			set_tx(false);
+		}
+	};
+
+	tx_button.on_touch_press = [this](Button&) {
+		if(!transmitting) {
+			button_touch = true;
+		}	
+	};
+
+	transmitter_model.set_sampling_rate(sampling_rate);
+	transmitter_model.set_baseband_bandwidth(1750000);
+	
+	set_tx(false);
+	
+	audio::set_rate(audio::Rate::Hz_24000);
+	audio::input::start();
+}
+
+MicTXView::~MicTXView() {
+	
+	audio::input::stop();
+	transmitter_model.set_tuning_frequency(tx_frequency); // Save Tx frequency instead of Rx. Or maybe we need some "System Wide" changes to seperate Tx and Rx frequency.
+	transmitter_model.disable();
+	if (rx_enabled) //Also turn off audio rx if enabled
+		rxaudio(false);
+	baseband::shutdown();
+}
+
+}
diff --git a/firmware/application/apps/ui_mictx.hpp b/firmware/application/apps/ui_mictx.hpp
index 2b7853da..9084047a 100644
--- a/firmware/application/apps/ui_mictx.hpp
+++ b/firmware/application/apps/ui_mictx.hpp
@@ -99,19 +99,27 @@ private:
 	int32_t focused_ui { 2 };
 	bool button_touch { false };
 
+	//AM TX Stuff
+	bool enable_am { false };
+	bool enable_dsb { false };
+	bool enable_usb { false };
+	bool enable_lsb { false };
+
 	
 	Labels labels {
 		{ { 3 * 8, 1 * 8 }, "MIC. GAIN:", Color::light_grey() },
 		{ { 3 * 8, 3 * 8 }, "F:", Color::light_grey() },
-		{ { 15 * 8, 3 * 8 }, "BW:   kHz", Color::light_grey() },
+		{ { 15 * 8, 3 * 8 }, "BW:   FM kHz", Color::light_grey() },
 		{ { 3 * 8, 5 * 8 }, "GAIN:", Color::light_grey() },
 		{ {11 * 8, 5 * 8 }, "Amp:", Color::light_grey() },
+		{ { 18 * 8, (5 * 8) }, "Mode:", Color::light_grey() },
 		{ { 3 * 8, 8 * 8 }, "TX Activation:", Color::light_grey() },
 		{ { 4 * 8, 10 * 8 }, "LVL:", Color::light_grey() },
 		{ {12 * 8, 10 * 8 }, "ATT:", Color::light_grey() },
 		{ {20 * 8, 10 * 8 }, "DEC:", Color::light_grey() },
 		{ { 4 * 8, ( 13 * 8 ) - 2 }, "TONE KEY:", Color::light_grey() },
 		{ { 9 * 8, 23 * 8 }, "VOL:", Color::light_grey() },
+		{ {17 * 8, 23 * 8 }, "FM RXBW:", Color::light_grey() },
 		{ {17 * 8, 25 * 8 }, "SQ:", Color::light_grey() },
 		{ { 5 * 8, 25 * 8 }, "F:", Color::light_grey() },
 		{ { 5 * 8, 27 * 8 }, "LNA:", Color::light_grey()},
@@ -162,6 +170,18 @@ private:
 		14,
 		' '
 	};
+	
+	OptionsField options_mode {
+		{ 24 * 8, 5 * 8 },
+		3,
+		{
+			{ "FM", 0 },
+			{ "AM", 1 },
+			{ "USB", 2 },
+			{ "LSB", 3 },
+			{ "DSB", 4 }
+		}
+	};
 	/*
 	Checkbox check_va {
 		{ 3 * 8, (10 * 8) - 4 },
@@ -231,6 +251,16 @@ private:
 		' ',
 	};
 	
+	OptionsField field_rxbw {
+	       { 25 * 8, 23 * 8},
+	       3,
+	       {
+	       		{"8k5", 0},
+	       		{"11k", 1},
+	       		{"16k", 2}
+	       	}
+	};
+	
 	NumberField field_squelch {
 		{ 20 * 8, 25 * 8 },
 		2,
diff --git a/firmware/application/apps/ui_mictx.hpp.1 b/firmware/application/apps/ui_mictx.hpp.1
new file mode 100644
index 00000000..3761c401
--- /dev/null
+++ b/firmware/application/apps/ui_mictx.hpp.1
@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
+ * Copyright (C) 2016 Furrtek
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __UI_MICTX_H__
+#define __UI_MICTX_H__
+
+#include "ui.hpp"
+#include "ui_widget.hpp"
+#include "ui_navigation.hpp"
+#include "ui_receiver.hpp"
+#include "transmitter_model.hpp"
+#include "tone_key.hpp"
+#include "message.hpp"
+#include "receiver_model.hpp"
+
+namespace ui {
+
+class MicTXView : public View {
+public:
+	MicTXView(NavigationView& nav);
+	~MicTXView();
+
+	MicTXView(const MicTXView&) = delete;
+	MicTXView(MicTXView&&) = delete;
+	MicTXView& operator=(const MicTXView&) = delete;
+	MicTXView& operator=(MicTXView&&) = delete;
+	
+	void focus() override;
+	
+	// PTT: Enable through KeyEvent (only works with presses), disable by polling :(
+	// This is the old "RIGHT BUTTON" method.
+	
+/*	bool on_key(const KeyEvent key) {
+		if ((key == KeyEvent::Right) && (!va_enabled) && ptt_enabled) {
+			set_tx(true);
+			return true;
+		} else
+			return false;
+	};  */
+	
+
+	std::string title() const override { return "Mic TX RX"; };
+
+private:
+	static constexpr uint32_t sampling_rate = 1536000U;
+	static constexpr uint32_t lcd_frame_duration = (256 * 1000UL) / 60;	// 1 frame @ 60fps in ms .8 fixed point  /60
+	
+	void update_vumeter();
+	void do_timing();
+	void set_tx(bool enable);
+//	void on_tuning_frequency_changed(rf::Frequency f);
+	void on_tx_progress(const bool done);
+	void configure_baseband();
+
+	void rxaudio(bool is_on);
+	void on_headphone_volume_changed(int32_t v);
+
+	void set_ptt_visibility(bool v);
+	
+	bool transmitting { false };
+	bool va_enabled { false };
+	bool ptt_enabled { true };
+	bool rogerbeep_enabled { false };
+	bool rx_enabled { false };
+	uint32_t tone_key_index { };
+	float mic_gain { 1.0 };
+	uint32_t audio_level { 0 };
+	uint32_t va_level { };
+	uint32_t attack_ms { };
+	uint32_t decay_ms { };
+	uint32_t attack_timer { 0 };
+	uint32_t decay_timer { 0 };
+	int32_t tx_gain { 47 };
+    	bool rf_amp { false };
+	int32_t rx_lna { 32 };
+	int32_t rx_vga { 32 };
+	bool rx_amp { false };
+	rf::Frequency tx_frequency { 0 };
+	rf::Frequency rx_frequency { 0 };
+	int32_t focused_ui { 2 };
+	bool button_touch { false };
+	
+	//AM TX Stuff
+	bool enable_usb { false };
+	bool enable_lsb { false };
+	bool enable_am { false };
+	uint32_t am_carrier_lvl { 20 };
+//	uint32_t am_mod_div { 1 }; 
+
+	
+	Labels labels {
+		{ { 3 * 8, 1 * 8 }, "MIC. GAIN:", Color::light_grey() },
+		{ { 3 * 8, 3 * 8 }, "F:", Color::light_grey() },
+		{ { 15 * 8, 3 * 8 }, "BW:    FM kHz", Color::light_grey() },
+		{ { 3 * 8, 5 * 8 }, "GAIN:", Color::light_grey() },
+		{ {11 * 8, 5 * 8 }, "Amp:", Color::light_grey() },
+		{ { 18 * 8, (5 * 8) }, "Mode:", Color::light_grey() },
+//		{ { 21 * 8, (1 * 8) }, "AM Car:", Color::light_grey() },
+//		{ { 20 * 8, (16 * 8) + 2 }, "AMCAR:", Color::light_grey() },
+		{ { 3 * 8, 8 * 8 }, "TX Activation:", Color::light_grey() },
+		{ { 4 * 8, 10 * 8 }, "LVL:", Color::light_grey() },
+		{ {12 * 8, 10 * 8 }, "ATT:", Color::light_grey() },
+		{ {20 * 8, 10 * 8 }, "DEC:", Color::light_grey() },
+		{ { 4 * 8, ( 13 * 8 ) - 2 }, "TONE KEY:", Color::light_grey() },
+		{ { 5 * 8, 23 * 8 }, "VOL:", Color::light_grey() },
+		{ {17 * 8, 23 * 8 }, "FM RXBW:", Color::light_grey() },
+		{ {17 * 8, 25 * 8 }, "SQ:", Color::light_grey() },
+		{ { 5 * 8, 25 * 8 }, "F:", Color::light_grey() },
+		{ { 5 * 8, 27 * 8 }, "LNA:", Color::light_grey()},
+		{ {12 * 8, 27 * 8 }, "VGA:", Color::light_grey()},
+		{ {19 * 8, 27 * 8 }, "AMP:", Color::light_grey()}
+	};
+	
+	VuMeter vumeter {
+		{ 0 * 8, 1 * 8, 2 * 8, 33 * 8 },
+		12,
+		true
+	};
+
+	
+	OptionsField options_gain {
+		{ 13 * 8, 1 * 8 },
+		4,
+		{
+			{ "x0.5", 5 },
+			{ "x1.0", 10 },
+			{ "x1.5", 15 },
+			{ "x2.0", 20 }
+		}
+	};
+	OptionsField options_mode {
+		{ 24 * 8, 5 * 8 },
+		3,
+		{
+			{ "FM", 0 },
+			{ "AM", 1 },
+			{ "USB", 2 },
+			{ "LSB", 3 },
+			{ "DSB", 4 }
+		}
+	};
+	
+	FrequencyField field_frequency {
+		{ 5 * 8, 3 * 8 },
+	};
+	NumberField field_bw {
+		{ 18 * 8, 3 * 8 },
+		3,
+		{ 0, 150 },
+		1,
+		' '
+	};
+	
+/*	NumberField field_carrier {
+		{ 28 * 8, 1 * 8},
+		2,
+		{ 0, 99},
+		1,
+		' '
+	};*/
+	
+	NumberField field_rfgain {
+		{ 8 * 8, 5 * 8 },
+		2,
+		{ 0, 47 },
+		1,
+		' '
+	};
+	NumberField field_rfamp {
+		{ 15 * 8, 5 * 8 },
+		2,
+		{ 0, 14 },
+		14,
+		' '
+	};
+	
+	/*Checkbox check_va {
+		{ 3 * 8, (10 * 8) - 4 },
+		7,
+		"Voice activation",
+		false
+	};*/
+	
+
+	OptionsField field_va {
+		{ 17 * 8, 8 * 8 },
+		3,
+		{
+			{" OFF", 0},
+			{" PTT", 1},
+			{"AUTO", 2}
+		}
+	};
+	
+	OptionsField field_rxbw {
+	       { 25 * 8, 23 * 8},
+	       3,
+	       {
+	       		{"8k5", 0},
+	       		{"11k", 1},
+	       		{"16k", 2}
+	       	}
+	};
+
+	NumberField field_va_level {
+		{ 8 * 8, 10 * 8 },
+		3,
+		{ 0, 255 },
+		2,
+		' '
+	};
+	NumberField field_va_attack {
+		{ 16 * 8, 10 * 8 },
+		3,
+		{ 0, 999 },
+		20,
+		' '
+	};
+	NumberField field_va_decay {
+		{ 24 * 8, 10 * 8 },
+		4,
+		{ 0, 9999 },
+		100,
+		' '
+	};
+	
+	OptionsField options_tone_key {
+		{ 10 * 8, ( 15 * 8 ) - 2 },
+		23,
+		{ }
+	};
+
+	Checkbox check_rogerbeep {
+		{ 3 * 8, ( 16 * 8 ) + 4 },
+		10,
+		"Roger beep",
+		false
+	};
+
+	Checkbox check_rxactive {
+		{ 3 * 8, ( 21 * 8 ) - 4 },
+		8,
+		"RX audio listening",
+		true
+	};
+
+	NumberField field_volume {
+		{ 10 * 8, 23 * 8 },
+		2,
+		{ 0, 99 },
+		1,
+		' ',
+	};
+	
+	NumberField field_squelch {
+		{ 20 * 8, 25 * 8 },
+		2,
+		{ 0, 99 },
+		1,
+		' ',
+	};
+
+	FrequencyField field_rxfrequency {
+		{ 7 * 8, 25 * 8 },
+	};
+
+	NumberField field_rxlna {
+		{ 9 * 8, 27 * 8 },
+		2,
+		{ 0, 40 },
+		8,
+		' ',
+	};
+
+	NumberField field_rxvga {
+		{ 16 * 8, 27 * 8 },
+		2,
+		{ 0, 62 },
+		2,
+		' ',
+	};
+
+	NumberField field_rxamp {
+		{ 23 * 8, 27 * 8 },
+		1,
+		{ 0, 1 },
+		1,
+		' ',
+	};
+
+	Button tx_button {
+		{ 10 * 8, 30 * 8, 10 * 8, 5 * 8 },
+		"TX",
+		true
+	};
+
+
+	MessageHandlerRegistration message_handler_lcd_sync {
+		Message::ID::DisplayFrameSync,
+		[this](const Message* const) {
+			this->do_timing();
+			this->update_vumeter();
+		}
+	};
+	
+	MessageHandlerRegistration message_handler_audio_level {
+		Message::ID::AudioLevelReport,
+		[this](const Message* const p) {
+			const auto message = static_cast<const AudioLevelReportMessage*>(p);
+			this->audio_level = message->value;
+		}
+	};
+	
+	MessageHandlerRegistration message_handler_tx_progress {
+		Message::ID::TXProgress,
+		[this](const Message* const p) {
+			const auto message = *reinterpret_cast<const TXProgressMessage*>(p);
+			this->on_tx_progress(message.done);
+		}
+	};
+};
+
+} /* namespace ui */
+
+#endif/*__UI_MICTX_H__*/
diff --git a/firmware/application/baseband_api.cpp b/firmware/application/baseband_api.cpp
index 2bff3c53..a3e1cab3 100644
--- a/firmware/application/baseband_api.cpp
+++ b/firmware/application/baseband_api.cpp
@@ -176,13 +176,18 @@ void kill_afsk() {
 }
 
 void set_audiotx_config(const uint32_t divider, const float deviation_hz, const float audio_gain,
-					const uint32_t tone_key_delta) {
+					const uint32_t tone_key_delta, const bool am_enabled, const bool dsb_enabled,
+					const bool usb_enabled, const bool lsb_enabled) {
 	const AudioTXConfigMessage message {
 		divider,
 		deviation_hz,
 		audio_gain,
 		tone_key_delta,
-		(float)persistent_memory::tone_mix() / 100.0f
+		(float)persistent_memory::tone_mix() / 100.0f,
+		am_enabled,
+		dsb_enabled,
+		usb_enabled,
+		lsb_enabled
 	};
 	send_message(&message);
 }
diff --git a/firmware/application/baseband_api.hpp b/firmware/application/baseband_api.hpp
index 43d0eebe..8a50782b 100644
--- a/firmware/application/baseband_api.hpp
+++ b/firmware/application/baseband_api.hpp
@@ -61,7 +61,8 @@ void set_tones_config(const uint32_t bw, const uint32_t pre_silence, const uint1
 void kill_tone();
 void set_sstv_data(const uint8_t vis_code, const uint32_t pixel_duration);
 void set_audiotx_config(const uint32_t divider, const float deviation_hz, const float audio_gain,
-					const uint32_t tone_key_delta);
+			const uint32_t tone_key_delta, const bool am_enabled, const bool dsb_enabled,
+			const bool usb_enabled, const bool lsb_enabled);
 void set_fifo_data(const int8_t * data);
 void set_pitch_rssi(int32_t avg, bool enabled);
 void set_afsk_data(const uint32_t afsk_samples_per_bit, const uint32_t afsk_phase_inc_mark, const uint32_t afsk_phase_inc_space,
diff --git a/firmware/baseband/CMakeLists.txt b/firmware/baseband/CMakeLists.txt
index c4aafa56..227e59fb 100644
--- a/firmware/baseband/CMakeLists.txt
+++ b/firmware/baseband/CMakeLists.txt
@@ -113,6 +113,8 @@ set(CPPSRC
 	baseband_stats_collector.cpp
 	dsp_decimate.cpp
 	dsp_demodulate.cpp
+	dsp_hilbert.cpp
+	dsp_modulate.cpp
 	dsp_goertzel.cpp
 	matched_filter.cpp
 	spectrum_collector.cpp
@@ -125,6 +127,7 @@ set(CPPSRC
 	${COMMON}/dsp_fft.cpp
 	${COMMON}/dsp_fir_taps.cpp
 	${COMMON}/dsp_iir.cpp
+	${COMMON}/dsp_sos.cpp
 	fxpt_atan2.cpp
 	rssi.cpp
 	rssi_dma.cpp
diff --git a/firmware/baseband/dsp_hilbert.cpp b/firmware/baseband/dsp_hilbert.cpp
new file mode 100644
index 00000000..ff9e793c
--- /dev/null
+++ b/firmware/baseband/dsp_hilbert.cpp
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "dsp_hilbert.hpp"
+#include "dsp_sos_config.hpp"
+
+namespace dsp {
+
+HilbertTransform::HilbertTransform() {
+	n = 0;
+
+	sos_i.configure(half_band_lpf_config);
+	sos_q.configure(half_band_lpf_config);
+}
+
+void HilbertTransform::execute(float in, float &out_i, float &out_q) {
+	float a = 0, b = 0;
+	
+	switch (n) {
+		case 0:		a = in;		b = 0;		break;
+		case 1:		a = 0;		b = -in;	break;
+		case 2:		a = -in;	b = 0;		break;
+		case 3:		a = 0;		b = in;		break;
+	}
+	
+	float i = sos_i.execute(a) * 2.0f;
+	float q = sos_q.execute(b) * 2.0f;
+	
+	switch (n) {
+		case 0:		out_i = i;	out_q = q;	break;
+		case 1:		out_i = -q;	out_q = i;	break;
+		case 2:		out_i = -i;	out_q = -q;	break;
+		case 3:		out_i = q;	out_q = -i;	break;
+	}
+
+	n = (n + 1) % 4;
+}
+
+} /* namespace dsp */
diff --git a/firmware/baseband/dsp_hilbert.hpp b/firmware/baseband/dsp_hilbert.hpp
new file mode 100644
index 00000000..a4b56cd5
--- /dev/null
+++ b/firmware/baseband/dsp_hilbert.hpp
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __DSP_HILBERT_H__
+#define __DSP_HILBERT_H__
+
+#include "dsp_sos.hpp"
+#include "dsp_types.hpp"
+
+namespace dsp {
+
+class HilbertTransform {
+public:
+
+	HilbertTransform();
+	void execute(float in, float &out_i, float &out_q);
+
+private:
+	uint8_t			n = 0;
+	SOSFilter<5>	sos_i;
+	SOSFilter<5>	sos_q;
+};
+
+} /* namespace dsp */
+
+#endif/*__DSP_HILBERT_H__*/
diff --git a/firmware/baseband/dsp_modulate.cpp b/firmware/baseband/dsp_modulate.cpp
new file mode 100644
index 00000000..d59c7e3e
--- /dev/null
+++ b/firmware/baseband/dsp_modulate.cpp
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "dsp_modulate.hpp"
+#include "sine_table_int8.hpp"
+
+namespace dsp {
+namespace modulate {
+
+Modulator::~Modulator() {
+}
+
+Mode Modulator::get_mode() {
+	return mode;
+}
+
+void Modulator::set_mode(Mode new_mode) {
+	mode = new_mode;
+}
+
+void Modulator::set_over(uint32_t new_over) {
+    over = new_over;
+}
+
+///
+
+SSB::SSB() : hilbert() {
+	mode = Mode::LSB;
+}
+
+void SSB::execute(const buffer_s16_t& audio, const buffer_c8_t& buffer) {
+	int32_t		sample = 0;
+	int8_t		re = 0, im = 0;
+	
+	for (size_t counter = 0; counter < buffer.count; counter++) {
+		if (counter % 128 == 0) {
+			float	i = 0.0, q = 0.0;
+
+		    sample = audio.p[counter / over] >> 2;
+			//switch (mode) {
+				//case Mode::LSB:	
+			hilbert.execute(sample / 32768.0f, i, q);
+				//case Mode::USB:	hilbert.execute(sample / 32768.0f, q, i);
+				//default:	break;
+			//}
+
+			i *= 64.0f;
+			q *= 64.0f;
+			switch (mode) {
+				case Mode::LSB:	re = q;	im = i;	break;
+				case Mode::USB:	re = i;	im = q;	break;
+				default:	re = 0; im = 0;	break;
+			}
+			//re = q;
+			//im = i;
+			//break;
+		}
+		
+		buffer.p[counter] = { re, im };
+	}
+}
+
+///
+
+FM::FM() {
+	mode = Mode::FM;
+}
+
+void FM::set_fm_delta(uint32_t new_delta) {
+	fm_delta = new_delta;
+}
+
+void FM::execute(const buffer_s16_t& audio, const buffer_c8_t& buffer) {
+	int32_t		sample = 0;
+	int8_t		re, im;
+
+	for (size_t counter = 0; counter < buffer.count; counter++) {
+		if (counter % over == 0) {
+		    sample = audio.p[counter / over] >> 8;
+		    delta = sample * fm_delta;
+		}
+
+		phase += delta;
+		sphase = phase >> 24;
+
+		re = (sine_table_i8[(sphase + 64) & 255]);
+		im = (sine_table_i8[sphase]);
+		
+		buffer.p[counter] = { re, im };
+	}
+}
+
+AM::AM() {
+	mode = Mode::AM;
+}
+
+void AM::execute(const buffer_s16_t& audio, const buffer_c8_t& buffer) {
+	int32_t         sample = 0;
+	int8_t          re, im;
+	float		q = 0.0;
+	
+	for (size_t counter = 0; counter < buffer.count; counter++) {
+		if (counter % 128 == 0) {
+			sample = audio.p[counter / over] >> 2;
+		}
+
+		q = sample / 32768.0f;
+		q *= 64.0f;
+		switch (mode) {
+			case Mode::AM:	re = q + 20; im = q + 20;
+			case Mode::DSB:	re = q; im = q;
+			default:	break;
+		}
+		buffer.p[counter] = { re, im };
+	}
+}
+
+}
+}
diff --git a/firmware/baseband/dsp_modulate.hpp b/firmware/baseband/dsp_modulate.hpp
new file mode 100644
index 00000000..fdc6e95f
--- /dev/null
+++ b/firmware/baseband/dsp_modulate.hpp
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __DSP_MODULATE_H__
+#define __DSP_MODULATE_H__
+
+#include "dsp_types.hpp"
+#include "dsp_hilbert.hpp"
+
+namespace dsp {
+namespace modulate {
+
+enum class Mode {
+	None,
+	AM,
+	DSB,
+	LSB,
+	USB,
+	FM
+};
+
+///
+
+class Modulator {
+public:
+	virtual void execute(const buffer_s16_t& audio, const buffer_c8_t& buffer) = 0;
+	virtual ~Modulator();
+
+	Mode get_mode();
+	void set_mode(Mode new_mode);
+
+    void set_over(uint32_t new_over);
+
+protected:
+    uint32_t    over = 1;
+	Mode	    mode = Mode::None;
+};
+
+///
+
+class SSB : public Modulator {
+public:
+	SSB();
+
+	virtual void execute(const buffer_s16_t& audio, const buffer_c8_t& buffer);
+
+private:
+	dsp::HilbertTransform	hilbert;
+};
+
+///
+
+class FM : public Modulator {
+public:
+	FM();
+
+	virtual void execute(const buffer_s16_t& audio, const buffer_c8_t& buffer);
+	void set_fm_delta(uint32_t new_delta);
+
+///
+
+private:
+	uint32_t	fm_delta { 0 };
+	uint32_t	phase { 0 }, sphase { 0 };
+	int32_t		sample { 0 }, delta { };
+};
+
+class AM : public Modulator {
+public:
+        AM();
+
+        virtual void execute(const buffer_s16_t& audio, const buffer_c8_t& buffer);
+};
+
+} /* namespace modulate */
+} /* namespace dsp */
+
+#endif/*__DSP_MODULATE_H__*/
diff --git a/firmware/baseband/proc_mictx.cpp b/firmware/baseband/proc_mictx.cpp
index 0a45df78..d5c0040c 100644
--- a/firmware/baseband/proc_mictx.cpp
+++ b/firmware/baseband/proc_mictx.cpp
@@ -35,6 +35,7 @@ void MicTXProcessor::execute(const buffer_c8_t& buffer){
 	if (!configured) return;
 	
 	audio_input.read_audio_buffer(audio_buffer);
+	modulator->execute(audio_buffer, buffer);
 
 	for (size_t i = 0; i < buffer.count; i++) {
 		
@@ -70,6 +71,7 @@ void MicTXProcessor::execute(const buffer_c8_t& buffer){
 			sample = beep_gen.process(0);
 		}
 		
+		/*
 		sample = tone_gen.process(sample);
 		
 		// FM
@@ -87,6 +89,7 @@ void MicTXProcessor::execute(const buffer_c8_t& buffer){
 		}
 		
 		buffer.p[i] = { re, im };
+		*/
 	}
 }
 
@@ -96,7 +99,40 @@ void MicTXProcessor::on_message(const Message* const msg) {
 	
 	switch(msg->id) {
 		case Message::ID::AudioTXConfig:
-			fm_delta = config_message.deviation_hz * (0xFFFFFFUL / baseband_fs);
+			if (fm_enabled) {
+				dsp::modulate::FM *fm = new dsp::modulate::FM();
+				
+				fm->set_fm_delta(config_message.deviation_hz * (0xFFFFFFUL / baseband_fs));
+				modulator = fm;
+			}
+			
+			if (usb_enabled) {
+				modulator = new dsp::modulate::SSB();
+				modulator->set_mode(dsp::modulate::Mode::USB);
+			}
+			
+			if (lsb_enabled) {
+				modulator = new dsp::modulate::SSB();
+				modulator->set_mode(dsp::modulate::Mode::LSB);
+			}
+			if (am_enabled) {
+				modulator = new dsp::modulate::AM();
+				modulator->set_mode(dsp::modulate::Mode::AM);
+			}
+			if (dsb_enabled) {
+				modulator = new dsp::modulate::AM();
+				modulator->set_mode(dsp::modulate::Mode::DSB);
+			}
+
+            modulator->set_over(baseband_fs / 24000);
+			
+			am_enabled = config_message.am_enabled;
+			usb_enabled = config_message.usb_enabled;
+			lsb_enabled = config_message.lsb_enabled;
+			dsb_enabled = config_message.dsb_enabled;
+			if (!am_enabled || !usb_enabled || !lsb_enabled || !dsb_enabled) {
+				fm_enabled = true;
+			}
 			
 			audio_gain = config_message.audio_gain;
 			divider = config_message.divider;
diff --git a/firmware/baseband/proc_mictx.hpp b/firmware/baseband/proc_mictx.hpp
index 986b1017..6220835c 100644
--- a/firmware/baseband/proc_mictx.hpp
+++ b/firmware/baseband/proc_mictx.hpp
@@ -27,6 +27,7 @@
 #include "baseband_thread.hpp"
 #include "audio_input.hpp"
 #include "tone_gen.hpp"
+#include "dsp_modulate.hpp"
 
 class MicTXProcessor : public BasebandProcessor {
 public:
@@ -50,7 +51,14 @@ private:
 	AudioInput audio_input { };
 	ToneGen tone_gen { };
 	ToneGen beep_gen { };
-	
+	dsp::modulate::Modulator *modulator;
+
+	bool am_enabled { false };
+	bool fm_enabled { true };
+	bool usb_enabled { false };
+	bool lsb_enabled { false };
+	bool dsb_enabled { false };
+
 	uint32_t divider { };
 	float audio_gain { };
 	uint64_t power_acc { 0 };
diff --git a/firmware/common/dsp_iir.cpp b/firmware/common/dsp_iir.cpp
index 443183ba..98e627ff 100644
--- a/firmware/common/dsp_iir.cpp
+++ b/firmware/common/dsp_iir.cpp
@@ -55,3 +55,29 @@ void IIRBiquadFilter::execute(const buffer_f32_t& buffer_in, const buffer_f32_t&
 void IIRBiquadFilter::execute_in_place(const buffer_f32_t& buffer) {
 	execute(buffer, buffer);
 }
+
+void IIRBiquadDF2Filter::configure(const iir_biquad_df2_config_t& config) {
+	b0 = config[0] / config[3];
+	b1 = config[1] / config[3];
+	b2 = config[2] / config[3];
+	a1 = config[4] / config[3];
+	a2 = config[5] / config[3];
+}
+
+//  scipy.signal.sosfilt
+//
+//  x_n = x[i, n]  # make a temporary copy
+//  # Use direct II transposed structure:
+//  x[i, n] = b[s, 0] * x_n + zi[i, s, 0]
+//  zi[i, s, 0] = (b[s, 1] * x_n - a[s, 0] * x[i, n] + zi[i, s, 1])
+//  zi[i, s, 1] = (b[s, 2] * x_n - a[s, 1] * x[i, n])
+
+float IIRBiquadDF2Filter::execute(float x) {
+	float y;
+	
+	y = b0 * x + z0;
+	z0 = b1 * x - a1 * y + z1;
+	z1 = b2 * x - a2 * y;
+
+	return y;
+}
diff --git a/firmware/common/dsp_iir.hpp b/firmware/common/dsp_iir.hpp
index 0ecc996a..9929c31c 100644
--- a/firmware/common/dsp_iir.hpp
+++ b/firmware/common/dsp_iir.hpp
@@ -31,6 +31,9 @@ struct iir_biquad_config_t {
 	std::array<float, 3> a;
 };
 
+// 0..2 - b, 3..5 - a
+typedef std::array<float, 6> iir_biquad_df2_config_t;
+
 constexpr iir_biquad_config_t iir_config_passthrough {
 	{ { 1.0f, 0.0f, 0.0f } },
 	{ { 0.0f, 0.0f, 0.0f } },
@@ -67,4 +70,21 @@ private:
 	std::array<float, 3> y { { 0.0f, 0.0f, 0.0f } };
 };
 
+class IIRBiquadDF2Filter {
+public:
+
+	void configure(const iir_biquad_df2_config_t& config);
+	float execute(float z);
+
+private:
+	float b0 = 0;
+	float b1 = 0;
+	float b2 = 0;
+	float a1 = 0;
+	float a2 = 0;
+
+	float z0 = 0;
+	float z1 = 0;
+};
+
 #endif/*__DSP_IIR_H__*/
diff --git a/firmware/common/dsp_sos.cpp b/firmware/common/dsp_sos.cpp
new file mode 100644
index 00000000..cf0ccfa5
--- /dev/null
+++ b/firmware/common/dsp_sos.cpp
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "dsp_sos.hpp"
diff --git a/firmware/common/dsp_sos.hpp b/firmware/common/dsp_sos.hpp
new file mode 100644
index 00000000..b7446636
--- /dev/null
+++ b/firmware/common/dsp_sos.hpp
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __DSP_SOS_H__
+#define __DSP_SOS_H__
+
+#include "dsp_iir.hpp"
+
+#include <cstdint>
+#include <cstddef>
+
+template <size_t N>
+class SOSFilter {
+
+public:
+
+    void configure(const iir_biquad_df2_config_t config[N]) {
+        for (size_t i = 0; i < N; i++)
+            filters[i].configure(config[i]);
+    }
+
+    float execute(float value) {
+        for (auto &filter : filters)
+            value = filter.execute(value);
+        return value;
+    }
+
+private:
+
+    IIRBiquadDF2Filter filters[N];
+};
+
+#endif/*__DSP_SOS_H__*/
diff --git a/firmware/common/dsp_sos_config.hpp b/firmware/common/dsp_sos_config.hpp
new file mode 100644
index 00000000..23c36622
--- /dev/null
+++ b/firmware/common/dsp_sos_config.hpp
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2020 Belousov Oleg
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __DSP_SOS_CONFIG_H__
+#define __DSP_SOS_CONFIG_H__
+
+#include "dsp_iir.hpp"
+
+// scipy.signal.iirfilter(ftype="ellip", N = 10, rp = 0.5, rs = 60.0, Wn = 0.5, btype = 'lowpass', output="sos")
+
+constexpr iir_biquad_df2_config_t half_band_lpf_config[5] = {
+	{ 0.02339042f,	0.0411599f,		0.02339042f,	1.0f,		-0.95317621f,	0.33446485f },
+	{ 1.0f,			0.82196114f,	1.0f,			1.0f,       -0.50327735f,	0.63611027f },
+	{ 1.0f,         0.32515305f,	1.0f,           1.0f,       -0.18144446f,   0.85269598f },
+	{ 1.0f,         0.14394122f,	1.0f,          	1.0f,       -0.04368236f,	0.94798064f },
+	{ 1.0f,         0.08720754,		1.0f,           1.0f,        0.00220944f,  	0.98743139f }
+};
+
+#endif/*__DSP_SOS_CONFIG_H__*/
diff --git a/firmware/common/message.hpp b/firmware/common/message.hpp
index 32a8fc7b..3d288d7c 100644
--- a/firmware/common/message.hpp
+++ b/firmware/common/message.hpp
@@ -856,13 +856,21 @@ public:
 		const float deviation_hz,
 		const float audio_gain,
 		const uint32_t tone_key_delta,
-		const float tone_key_mix_weight
+		const float tone_key_mix_weight,
+		const bool am_enabled,
+		const bool dsb_enabled,
+		const bool usb_enabled,
+		const bool lsb_enabled
 	) : Message { ID::AudioTXConfig },
 		divider(divider),
 		deviation_hz(deviation_hz),
 		audio_gain(audio_gain),
 		tone_key_delta(tone_key_delta),
-		tone_key_mix_weight(tone_key_mix_weight)
+		tone_key_mix_weight(tone_key_mix_weight),
+		am_enabled(am_enabled),
+		dsb_enabled(dsb_enabled),
+		usb_enabled(usb_enabled),
+		lsb_enabled(lsb_enabled)
 	{
 	}
 
@@ -871,6 +879,10 @@ public:
 	const float audio_gain;
 	const uint32_t tone_key_delta;
 	const float tone_key_mix_weight;
+	const bool am_enabled;
+	const bool dsb_enabled;
+	const bool usb_enabled;
+	const bool lsb_enabled;
 };
 
 class SigGenConfigMessage : public Message {