heurist1
a571e40c59
Changed amp to integer
2021-11-06 10:15:17 +00:00
heurist1
79b24ebe13
Improve output
2021-11-01 22:51:06 +00:00
heurist1
8a4564f6f5
Slow down redraw
...
Combine improvements and slow down refresh.
2021-11-01 20:37:27 +00:00
heurist1
1a21e06bbe
Improved overlap packet detection
...
Improved overlap detection and reduced the threshold
2021-11-01 19:28:56 +00:00
eried
da380261b2
Version bump
2021-11-01 11:49:42 +01:00
eried
790ebdff31
Updating the contributors list
2021-11-01 11:48:14 +01:00
eried
cf906684cc
Merge branch 'next'
2021-11-01 11:46:06 +01:00
heurist1
0d51e3569f
Improved decode of type 17 at expense of others
...
Reject all non type 17 packets
2021-10-31 13:23:48 +00:00
heurist1
0d7bbac6a1
Added switching message length
...
Improves detections in test file from 77 to 80
2021-10-30 00:53:29 +01:00
heurist1
b499380448
Keep items with loc above those without
...
Removed fixsbt and added a new state of signal without position. Positions stay higher than non positions.
2021-10-29 16:59:52 +01:00
Brumi-2021
ab8f93805d
Small correction,of previous PR , about New_Feature_GCC_10_Compile_errors_#199 (based on sharebrained indications)
2021-10-25 18:11:31 +02:00
Brumi-2021
f4db4e2b53
Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax.
2021-10-23 22:17:18 +02:00
heurist1
318720f364
Removed all traces of the parameters on the POGSAG config message
...
Left in the message for the moment, because there are likely to be parameters needed at some point.
2021-10-22 18:11:50 +01:00
heurist1
6ef24ce71c
Removed unused GUI items
2021-10-22 15:41:48 +01:00
heurist1
62f063aef5
Removed unused items from the UI
...
Removed unused items from the UI
2021-10-21 17:14:08 +01:00
heurist1
110b40ea49
Changed content of table
...
Changed the columns of the table to be more useful
2021-10-17 10:03:28 +01:00
heurist1
2b045ffca6
Mark where to change
2021-10-15 18:40:02 +01:00
heurist1
be01ca6da1
Significantly improved adsb demod
...
Change preamble detection, reduce cpu load
2021-10-15 14:26:33 +01:00
heurist1
0fed64636a
Store old changes to ADSB
...
Diff in previous changes to ADSB
2021-10-11 10:14:16 +01:00
heurist1
ab364ca497
POCSAG before reformat
...
This is the POCSAG code before reformat to put smooth and extract packets in the correct place
2021-10-10 09:15:42 +01:00
heurist1
a49c35088d
Added back
...
Added the ability to use the Up and Left buttons simultaneously to cause the cursor to move to the top left of the screen
2021-10-09 22:46:05 +01:00
Erwin Ried
848dba44d8
Merge pull request #395 from Brumi-2021/New-Feature-Add-Gain_TX-control-to-the-Replay-App
...
Add Gain_TX control to the Replay App
2021-10-06 01:15:32 +02:00
Erwin Ried
5a21c1c76a
Merge pull request #413 from Brumi-2021/New_Feature_Remove_Initial_short_Ant_DC_bias_pulse_when_cold_reset
...
Update main.cpp
2021-09-27 13:08:52 +02:00
Brumi-2021
b335886f42
Update main.cpp
...
Remove initial short wrong Ant-DC_BIAS pulse. (250 msegs aprox)
2021-09-25 16:37:30 +02:00
Erwin Ried
f12eb55f6b
Merge pull request #412 from ArjanOnwezen/fix-backlight-time-out
...
Fixed #398 : Changed datatype to be able to store > 255 second for backlight timer
2021-09-06 06:29:28 +02:00
Arjan Onwezen
6871126100
changed datatype to be able to store > 255 second for backlight timer
2021-09-03 16:46:41 +02:00
Erwin Ried
5b4c3514fb
Merge pull request #396 from texasyojimbo/next
...
Create ISM.TXT
2021-07-31 02:18:20 +02:00
AD5NL
af7242f7d1
Create ISM.TXT
...
Center frequencies for ISM bands. These are probably where we should be transmitting if unlicensed.
2021-07-26 15:39:31 -05:00
Brumi-2021
03eae70555
Add Gain_TX control to the Replay App
...
Current Replay App , shows in the user menu a UI to select two kind of controls for the RF output level :
1-) LNA GAIN (0..40 ) dB => but it has no TX effect because it is the RX-LNA . GAIN
2-) RF AMP (0 / +14dBm , (that was correct , we have two IC's , RX / TX ) (sw is controlling weill .
Note, although SW Version 1.40 do not leave to control drictly the GAIN TX
, that Replay App , in fact, it was using the inheritated selected GAIN TX from any previous usage of MIC App.
That Pull request alllows now to have the following controls
1-) GAIN TX (0..47 ) dB (now it is OK
2-) RF AMP (0 / +14dBm , (that was correct , we have two IC's , RX / TX ) (sw is controlling weill .
Remakrs : After the change , now we can control the GAIN TX , but not "in the fly" . When we are in the Replay loop , any change of the FREQUENCY or GAIN TX will be ignored , till we play STOP / START the loop again. (but the AMP RF (0 /+14 dBs) it works in the loop withouth any problems (same as before ) .
2021-07-15 18:15:44 +02:00
Erwin Ried
010f06c77c
Merge pull request #382 from teixeluis/hotfix-adsb-position
...
Hotfix to issue #362 - ADS-B RX app aircraft position jitter
2021-06-25 10:13:21 +02:00
teixeluis
2f86fa7e99
Merge branch 'hotfix-adsb-position' of https://github.com/teixeluis/portapack-mayhem into hotfix-adsb-position
2021-06-24 15:16:59 +01:00
teixeluis
fe806b7bdc
Fixed the mixing of aircraft coordinates in the details view, by
...
checking if the ICAO address of the frame and the current item
in the details view match. Slight refactor by placing the decimal
to string conversion function into the string_format module.
Added fix in the scope of issue #365
FrequencyStepView field in TransmitterView class
FrequencyStepView field in TransmitterView class
Update ui_transmitter.hpp
Update credits
Fixed left padding of the decimal part of the numbers.
2021-06-24 15:16:19 +01:00
teixeluis
22e8add4dd
Fixed left padding of the decimal part of the numbers.
2021-06-24 15:10:06 +01:00
teixeluis
93ce2b04c0
Merge branch 'next' into hotfix-adsb-position
2021-06-24 13:44:48 +01:00
teixeluis
b09439afb1
Fixed the mixing of aircraft coordinates in the details view, by
...
checking if the ICAO address of the frame and the current item
in the details view match. Slight refactor by placing the decimal
to string conversion function into the string_format module.
2021-06-23 23:52:15 +01:00
teixeluis
97349b06ef
Fixes to the log and screen rendering of the geo coordinates.
2021-06-23 19:54:34 +01:00
Erwin Ried
8329b66926
Update credits
2021-06-22 12:44:19 +02:00
Erwin Ried
52376b12b2
Merge pull request #359 from XxOinvizioNxX/next
...
Add FrequencyStepView field to the TransmitterView class
2021-06-22 12:30:59 +02:00
Erwin Ried
95f72991c4
Merge pull request #367 from teixeluis/hotfix-rx-hang-issue-365
...
Added fix in the scope of issue #365
2021-06-22 12:29:51 +02:00
teixeluis
2ceb49e4f2
Added more precise function to calculate NL (based on cmath lib).
...
Created constants for some of the values scattered in the code.
2021-06-19 23:41:06 +01:00
Erwin Ried
8afd83a4e1
Merge pull request #381 from teixeluis/feature-radiosondes-beep-371
...
Radiosonde beep pitch RSSI improvements. Keeping current frequency in battery backed RAM
2021-06-17 21:48:14 +02:00
teixeluis
8aff0bb4d8
Improved tone generator for proper frequency control. Also
...
features a square wave mode.
Added proportional beep duration based on the RSSI as well.
Now reading the current radiosonde frequency from the
battery backed RAM instead starting with the same frequency
all the time.
2021-06-16 23:23:47 +01:00
Erwin Ried
7fe6a3b04e
Merge pull request #379 from ArjanOnwezen/category-length-display-fix
...
fix save frequency gui glitch
2021-06-15 10:20:31 +02:00
Arjan Onwezen
c8a8a69832
fix save frequency gui glitch
2021-06-14 21:58:15 +02:00
Erwin Ried
de994d5911
Merge pull request #378 from ArjanOnwezen/adding-radiosonde-txt
...
Adding radiosonde txt
2021-06-14 21:10:10 +02:00
Arjan Onwezen
935db5b58b
Added radiosonde.txt
2021-06-14 18:15:42 +02:00
Arjan Onwezen
81f7875764
Added radiosonde.txt
2021-06-14 18:10:45 +02:00
Erwin Ried
0f511508a3
Merge pull request #376 from teixeluis/feature-radiosondes-beep-371
...
Feature radiosondes beep - working pitch RSSI
2021-06-14 10:35:48 +02:00
teixeluis
a80d91fb1e
More improvements to the rssi tone. Added saving of the tuned frequency
...
to the radio model persistent store.
2021-06-13 23:35:33 +01:00
teixeluis
43e123bafe
Used temporarily for experimental purposes, no longer needed.
2021-06-11 00:25:24 +01:00