Jared Boone
c8ffea0098
baseband: Move all init code into baseband.cpp.
2016-07-24 21:34:38 -07:00
Jared Boone
ea143bd3fc
Move baseband init/shutdown code to before/after main(), not inside.
2016-07-24 21:26:00 -07:00
Jared Boone
8b02e40602
Move touch ADC data collection to M0.
...
...so it continues when M4 is shut down.
It's not as pretty as using DMA, but it's far simpler, even if it involves letting the ADC run continuously and taking the last samples even if not synchronizing to the phase of the sampling of the channels.
2016-07-24 15:31:53 -07:00
Jared Boone
3c46abdb24
Remove redundant #include.
2016-07-19 14:25:56 -07:00
Jared Boone
ff9c911a93
Optional code to disable baseband DMA synchronization.
2016-07-19 11:02:30 -07:00
Jared Boone
42190b9587
CMake: Fix ldscript dependencies.
2016-07-03 18:48:39 -07:00
Jared Boone
b6fe392512
CMake: Improve dependencies, how output files are managed/cleaned.
...
I almost think I understand CMake, now. Almost.
2016-07-03 18:32:50 -07:00
Jared Boone
45ca3cf7e6
CMake: reduce intermediate targets, add script dependencies.
2016-07-03 11:32:21 -07:00
Jared Boone
b2d5e47308
Clear baseband message at end of shutdown().
...
Allow baseband to shut down completely before shutdown message is acknowledged.
2016-07-02 16:02:50 -07:00
Jared Boone
dbd0c17c2f
Clear baseband message for non-shutdown messages.
2016-07-02 16:02:03 -07:00
Jared Boone
f683980052
Generate and append terminator chunk to basebands image.
2016-06-30 19:37:32 -07:00
Jared Boone
c3d81f1496
Add HackRF factory firmware to basebands image.
2016-06-30 19:37:05 -07:00
Jared Boone
01833ccb83
Write all baseband binaries into tagged image file.
2016-06-30 16:45:41 -07:00
Jared Boone
97760a2f9d
Remove GNU Make files, now using CMake to build firmware.
2016-06-30 12:04:10 -07:00
Jared Boone
cf5ac441ae
Add CMake firmware build system.
2016-06-30 12:02:43 -07:00
Jared Boone
500a651bcf
Give Processors a run() function.
...
So main() can call it, start a Processor linked in to the baseband binary.
2016-06-30 11:53:58 -07:00
Jared Boone
1a5f3a4422
Give new Processor to EventDispatcher.
2016-06-25 11:14:28 -07:00
Jared Boone
525e72ac86
Move Baseband/RSSI threads into Processors.
2016-06-25 11:12:22 -07:00
Jared Boone
74c8429f75
Take processor as argument to BasebandThread.
...
Remove lots of dependency on specific processors.
Reduce state by removing processor switching from BasebandThread.
2016-06-25 10:57:16 -07:00
Jared Boone
bb32ef5321
Bracket BasebandThread loop with enable/disable code.
2016-06-25 10:53:16 -07:00
Jared Boone
9188bb9ee9
Remove thread pointer checking.
2016-06-24 15:46:53 -07:00
Jared Boone
f8a473d56b
Change baseband, RSSI threads to be more RAII.
2016-06-24 15:34:49 -07:00
Jared Boone
2b7e763619
Don't check EventDispatcher::thread_event_loop before using.
...
If static methods are getting called, variable is already set.
2016-06-24 15:27:23 -07:00
Jared Boone
9444d21c12
Remove baseband stats tracking code.
...
It was half-baked, and is getting in the way of a major refactoring.
2016-06-24 15:24:26 -07:00
Jared Boone
d41c6ee36a
Simplify app->baseband message handling.
...
No need for a FIFO when all messages are intended to be synchronous.
2016-06-24 14:16:45 -07:00
Jared Boone
61325e4696
Enable M4 interrupt from M0 only when expected.
2016-06-24 13:44:40 -07:00
Jared Boone
1010e6a234
Remove unused DMA Handler types.
2016-06-22 11:22:28 -07:00
Jared Boone
b34512e3d6
Eliminate a buffer_t copy/duplication.
2016-06-21 15:23:51 -07:00
Jared Boone
4734790518
Rework phase detector.
...
Simplify calculation of gate masks.
Use entire symbol period to compute symbol value.
Correct error sign based on symbol value.
2016-06-01 15:22:21 -07:00
Jared Boone
36eefa46e7
Improve OOK phase advance algorithm.
...
Now independent of samples/symbol, adjusts up to 1/8 of a cycle per symbol.
2016-06-01 15:20:23 -07:00
Jared Boone
57767004a2
TPMS: Comments, more descriptive declarations.
2016-05-30 11:28:22 -07:00
furrtek
6a0816ba56
Added carrier wake up in Xylos TX and cute icons
2016-05-27 06:48:04 +02:00
Jared Boone
38b374506e
More TPMS variable/enum renaming.
2016-05-23 18:02:25 -07:00
Jared Boone
249e6ab21e
TPMS: Improve descriptiveness of pipeline component names.
2016-05-23 11:22:09 -07:00
Jared Boone
a4ddf786d4
TPMS: Move only FSK slicer and payload handler into .hpp.
2016-05-23 11:12:06 -07:00
furrtek
7a90eab407
3MHz-wide fast close call works :) >3MHz doesn't work anymore :(
2016-05-17 20:27:51 +02:00
Jared Boone
d81d879aac
Shrink understood TPMS packet payload sizes to minimum required.
2016-05-17 11:26:17 -07:00
Jared Boone
9e3ac94187
A bit more TPMS member variable renaming.
2016-05-17 11:24:33 -07:00
Jared Boone
ad554b28b5
Rename TPMS clock recovery, packet builders for accuracy.
2016-05-17 11:11:30 -07:00
furrtek
9149508c83
Improved close call precision
2016-05-13 01:18:04 +02:00
furrtek
fb21c1332e
Started close call dev
2016-05-11 12:45:03 +02:00
Jared Boone
b82eff51dd
Refactor of capture buffer management between cores.
...
Instead of copying data into and out of FIFO, passing buffer pointers between cores that are sized to match preferred/ideal SD card write size.
2016-05-10 14:12:37 -07:00
Jared Boone
85a6ecd5dc
Missing "using namespace".
2016-05-10 11:02:42 -07:00
furrtek
c8d37e215b
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/audio_thread.cpp
firmware/application/event_m0.cpp
firmware/application/time.cpp
firmware/baseband-tx/clock_recovery.cpp
firmware/baseband/stream_input.hpp
firmware/common/message.hpp
2016-05-09 21:16:24 +02:00
furrtek
569f299f42
Merge
2016-05-09 21:05:11 +02:00
Jared Boone
1789868b8a
Track bytes from baseband and dropped when entering capture FIFO.
2016-04-27 10:40:50 -07:00
Jared Boone
d63136c52e
Remove unused StreamInput::written().
2016-04-27 10:32:29 -07:00
Jared Boone
d2cf129fd5
Retain CaptureConfig pointer in StreamInput.
2016-04-27 10:32:06 -07:00
Jared Boone
3e08318012
Pass CaptureConfig to StreamInput as pointer.
2016-04-27 10:31:37 -07:00
Jared Boone
91ee2dbb67
Move FIFO and write size to CaptureConfig structure.
...
Now configured from baseband, where write size and appropriate FIFO size is known.
2016-04-26 22:26:30 -07:00
Jared Boone
d5e21ce972
Use CaptureConfig to share state between cores.
...
Remove awful FIFO_HACK.
TODO: Lots of repeated code...
TODO: Capture thread is signalled too frequently.
2016-04-23 15:07:44 -07:00
Jared Boone
67eb62ec12
Provide AudioOutput::set_stream().
...
Assign when wanting to capture audio stream.
2016-04-23 14:55:59 -07:00
furrtek
2fcfdba9ea
"At least it builds !"
2016-04-21 22:12:51 +02:00
Jared Boone
051a63a222
Fix and clean up calculation of filter passband in capture mode.
2016-04-21 11:55:03 -07:00
Jared Boone
28ca45326d
Fix capture mode baseband_fs value.
2016-04-21 11:54:39 -07:00
furrtek
1b0da68d65
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/Makefile
firmware/application/core_control.cpp
firmware/application/touch.cpp
firmware/application/ui_debug.cpp
firmware/application/ui_debug.hpp
firmware/application/ui_navigation.cpp
firmware/baseband/baseband_thread.cpp
2016-04-21 20:36:19 +02:00
Jared Boone
ec75c00da2
Add capture mode waterfall.
2016-04-13 11:09:18 -07:00
Jared Boone
60a0d5c469
Capture mode channel stats
2016-04-12 10:51:20 -07:00
Jared Boone
e85503cd81
Nascent support for OOK TPMS transponders.
...
Apparently, Subaru and GMC. No CRC or other validation, no attempt to interpret packet contents yet.
2016-04-11 11:53:17 -07:00
Jared Boone
dc16aa478f
OOK slicer, clock recovery classes.
2016-04-11 11:50:03 -07:00
Jared Boone
5558ca60d7
Enlarge capture buffers -- inter-core FIFO, SDC
2016-04-11 11:00:47 -07:00
Jared Boone
743dc9f542
Rough implementation of capture mode
2016-04-11 10:59:55 -07:00
Jared Boone
9eefd56410
StreamInput: notify other core every fourth of FIFO written.
2016-04-11 10:20:19 -07:00
Jared Boone
a5c2143ca8
Signal M0 when stream FIFO has another "chunk".
2016-04-11 10:20:19 -07:00
Jared Boone
0d8971cd7d
Use size of provided buffer for stream write.
2016-04-11 10:20:19 -07:00
Jared Boone
56e448d355
Track StreamInput bytes written
2016-04-11 10:20:19 -07:00
Jared Boone
f94938db8e
De-template FIFO.
2016-04-11 10:20:19 -07:00
Jared Boone
59f1a32566
Semi-naive audio recording to SD card.
2016-04-11 10:20:19 -07:00
Jared Boone
c01f2d82e1
Move TPMS taps to dsp_fir_taps.hpp.
...
Will soon use in proc_record.cpp.
2016-04-11 10:18:31 -07:00
Jared Boone
4ac2c540c9
Disable SDC "nice waiting" for performance.
...
Quick test indicates 4.5% better average write performance. No change in reads.
2016-04-10 17:24:28 -07:00
Jared Boone
b35a8c4501
Add TPMS signal_type.
2016-04-06 17:04:40 -07:00
Jared Boone
bf348cf30a
Move message handling loops to MessageQueue.
2016-02-27 21:07:11 -08:00
Jared Boone
6101ca36cd
Use unique_ptr for baseband_buffer.
2016-02-23 20:21:32 -08:00
Jared Boone
3493b7d1b7
Hide BasebandThread::baseband_processor.
2016-02-23 19:56:55 -08:00
Jared Boone
a1b9f4aa1b
Simplify, generalize, share int16_t taps copy function.
...
Also prevents compiler loop unrolling in non-critical code, for code size improvement.
2016-02-23 15:04:20 -08:00
Jared Boone
9c11fdf80c
Explicit std::function nullptr checks.
...
Eliminates std::function check which tries to "_ZSt25__throw_bad_function_callv", along with 816 bytes of extra code, including some locale/wlocale/moneypunct nonsense.
2016-02-23 13:30:41 -08:00
Jared Boone
0c29308eb9
Fix FM squelch.
...
Forgot to recalibrate when adjusting normalization of float/audio signal path.
2016-02-16 11:32:38 -08:00
Jared Boone
ef86848139
Change baseband floats to normalize at +/-1.0.
2016-02-14 12:38:50 -08:00
Jared Boone
a5ed3b20b4
Audio compressor makeup gain value was inverted. Oops.
2016-02-14 12:17:04 -08:00
Jared Boone
1cdeb1ca4e
Use audio compressor in AM/SSB receiver mode.
2016-02-13 11:19:32 -08:00
Jared Boone
9f4c8929ac
Audio compressor implementation.
2016-02-13 11:19:07 -08:00
Jared Boone
b0e76191d7
Simplify some silly math.
2016-02-10 11:23:41 -08:00
Jared Boone
d125a5c662
Remove "K" parameter from FIFO template.
2016-02-10 10:41:06 -08:00
Jared Boone
096e961c67
Remove ChibiOS registry, thread names.
...
Only useful for debugging, but even then not very visible or useful. Gained 256 bytes of code RAM.
2016-02-09 11:36:38 -08:00
Jared Boone
ae93d8ee58
Simplify RSSI/BB DMA, extract to ThreadWait class.
...
Also saved 688 bytes of code.
2016-02-09 10:41:19 -08:00
Jared Boone
aae1a953fc
Init matched filter output variable.
2016-02-06 16:24:14 -08:00
Jared Boone
ac2320f0c5
Limit scope of some function variables.
2016-02-06 16:23:55 -08:00
furrtek
ba94ce55ef
Loadmodule emergency fix
2016-02-06 23:19:28 +01:00
Jared Boone
9430c94dec
Move I2S management to application side.
2016-02-05 15:25:08 -08:00
Jared Boone
cefab197da
Add virtual destructor for ThreadBase.
...
Oops!
2016-02-05 10:44:27 -08:00
furrtek
c81ba5be8e
"At least it builds, now"
2016-02-05 17:40:14 +01:00
furrtek
8009a9b543
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/Makefile
firmware/application/analog_audio_app.cpp
firmware/application/analog_audio_app.hpp
firmware/application/event.cpp
firmware/application/irq_ipc.hpp
firmware/application/portapack.hpp
firmware/application/receiver_model.cpp
firmware/application/receiver_model.hpp
firmware/application/recent_entries.cpp
firmware/application/string_format.hpp
firmware/application/ui_debug.cpp
firmware/application/ui_debug.hpp
firmware/application/ui_menu.cpp
firmware/application/ui_navigation.cpp
firmware/application/ui_navigation.hpp
firmware/application/ui_receiver.cpp
firmware/application/ui_receiver.hpp
firmware/application/ui_sd_card_status_view.cpp
firmware/application/ui_sd_card_status_view.hpp
firmware/application/ui_setup.cpp
firmware/application/ui_setup.hpp
firmware/application/ui_spectrum.hpp
firmware/baseband-tx/dsp_fir_taps.cpp
firmware/baseband-tx/dsp_fir_taps.hpp
firmware/baseband-tx/irq_ipc_m4.cpp
firmware/baseband-tx/irq_ipc_m4.hpp
firmware/baseband-tx/proc_audiotx.cpp
firmware/baseband/Makefile
firmware/baseband/audio_output.cpp
firmware/baseband/audio_output.hpp
firmware/baseband/block_decimator.hpp
firmware/baseband/dsp_decimate.cpp
firmware/baseband/dsp_decimate.hpp
firmware/baseband/dsp_demodulate.cpp
firmware/baseband/dsp_demodulate.hpp
firmware/baseband/dsp_fir_taps.cpp
firmware/baseband/irq_ipc_m4.cpp
firmware/baseband/irq_ipc_m4.hpp
firmware/baseband/proc_am_audio.cpp
firmware/baseband/proc_am_audio.hpp
firmware/baseband/proc_nfm_audio.cpp
firmware/baseband/proc_nfm_audio.hpp
firmware/baseband/proc_wfm_audio.cpp
firmware/baseband/proc_wfm_audio.hpp
firmware/baseband/spectrum_collector.hpp
firmware/common/dsp_fir_taps.cpp
firmware/common/dsp_fir_taps.hpp
firmware/common/event.hpp
firmware/common/message.hpp
firmware/common/ui_painter.cpp
firmware/common/ui_painter.hpp
2016-02-04 11:35:55 +01:00
furrtek
6e496e2b26
Merge fixing, commit to catch up on recent files
2016-02-04 10:27:53 +01:00
Jared Boone
20137db8d0
Move code into .cpp for tiny code size improvement.
2016-02-03 22:47:44 -08:00
Jared Boone
af8c9609a8
Little code size tweak using std::move in constructors.
2016-02-03 22:47:22 -08:00
Jared Boone
cff314cbc8
Convince compiler to not inline member constructors.
2016-02-03 19:59:41 -08:00
Jared Boone
ceef8d32d3
Use more accurate arctan for NBFM demodulation.
2016-02-02 16:15:14 -08:00
Jared Boone
ab2c5b256f
Reinstate and slightly tweak NBFM squelch.
2016-02-02 16:08:18 -08:00
furrtek
44638e504b
SYNC
2016-01-31 09:34:24 +01:00
Jared Boone
faf0fd6b91
Remove some spurious comments.
2016-01-30 21:11:59 -08:00
Jared Boone
e778be6472
Selection of AM/SSB from application side.
2016-01-30 18:02:28 -08:00
Jared Boone
f2dff16820
Use complex channel filter taps for AM/SSB.
2016-01-30 17:30:54 -08:00
Jared Boone
ad4d7a2e8a
Add SSB demodulator, switch between AM and SSB.
2016-01-30 17:30:03 -08:00
Jared Boone
1915ff980f
Add AM processor decim_2.
2016-01-30 17:28:11 -08:00
Jared Boone
b029bacd8c
Remove channel decimation from AMConfigureMessage.
2016-01-30 17:21:48 -08:00
Jared Boone
220b7b0a6a
Add SSB demodulator.
2016-01-29 22:27:18 -08:00
Jared Boone
a558565886
Further template BlockDecimator by element type, use for audio buffer.
...
Appropriating for use as a buffer accumulator that will save up enough audio samples to put into an audio DMA buffer.
2016-01-29 19:25:08 -08:00
Jared Boone
aead1d8798
Change NBFM audio fs->24k, AM ->12k.
...
Send channel decimation factor from application to baseband.
2016-01-29 19:23:30 -08:00
Jared Boone
28e5b7e4af
Remove some filter constructors, reset Z on configure().
2016-01-29 17:06:22 -08:00
Jared Boone
d984532190
Converging AM, NBFM processors for eventual merging.
2016-01-29 16:18:03 -08:00
Jared Boone
7c65a2d650
Clean up baseband processor statics.
2016-01-29 16:11:00 -08:00
Jared Boone
96898f82b2
Pass IIR configs from application to baseband.
2016-01-29 15:57:20 -08:00
Jared Boone
01e14ecbcf
Move IIR struct and configs to common/.
2016-01-29 15:43:39 -08:00
Jared Boone
db642cac8d
Change audio sampling rates on NBFM, AM modes.
2016-01-29 15:33:01 -08:00
Jared Boone
0e436ded14
Add IIR configs for lower audio sampling rates.
2016-01-29 15:32:32 -08:00
Jared Boone
a2a169352c
Rename existing IIR configs to reflect fs=48k design.
2016-01-29 15:24:31 -08:00
Jared Boone
1aa391bac8
Whoops. Revert to baseband -O3 compiler flag.
...
Was running out of CPU in ERT mode.
2016-01-17 14:08:49 -08:00
Jared Boone
8d2a86a499
Change baseband optimization from -O3 to -O2
...
Significant size benefit with negligable performance effect.
2016-01-16 14:10:22 -08:00
Jared Boone
58e6d26910
Move AudioOutput back to inside audio processor classes.
...
Was wasting precious RAM making it static. I lose 400 bytes of .text, not sure why, but I think the trade is worth it.
2016-01-16 13:56:23 -08:00
Jared Boone
1d0de2240d
Protect/private some ThreadBase implementation details.
2016-01-15 20:25:29 -08:00
Jared Boone
f06d5989db
Move EventDispatcher code out of .hpp.
2016-01-12 22:20:13 -08:00
Jared Boone
731cea1b96
Move event.* code into event_m[04].*.
...
Slightly more duplication of code now. Need a base class...
2016-01-12 22:00:42 -08:00
Jared Boone
e73a9f98a1
Move EventDispatcher code into event_*.hpp.
...
More code redistribution coming shortly...
2016-01-12 21:49:29 -08:00
Jared Boone
b993e3d73e
Consolidate spectrum collector message handling.
2016-01-12 10:32:00 -08:00
Jared Boone
a577bc9664
Refactor naughty static variable hiding in WidebandSpectrum.
2016-01-11 17:18:24 -08:00
Jared Boone
1f3c182b7f
Add missing message handler for wideband spectrum.
...
Spectrum processing was not enabled, and hence wideband spectrum was not being displayed.
2016-01-11 16:31:49 -08:00
Jared Boone
55e3a70fde
Change baseband audio processing pipeline to all floats.
2016-01-11 16:15:42 -08:00
Jared Boone
5e917ebb2c
Cache IIR filter state because compiler *sometimes* doesn't want to.
2016-01-11 15:44:42 -08:00
Jared Boone
e169a46367
Un-static squelch history.
2016-01-11 11:38:33 -08:00
Jared Boone
64966d4539
Fix NaNs coming out of angle_approx_0deg27().
...
Used in FM demodulator, was causing downstream problems when using the floating point values directly.
2016-01-11 11:17:54 -08:00
Jared Boone
5a532f34a7
Remove extra buffer structs/copies.
2016-01-11 09:35:58 -08:00
Jared Boone
877a66ca78
Create AudioOutput singleton, from extracted BasebandProcessor code.
2016-01-10 20:25:24 -08:00
Jared Boone
364217a2b5
Rename IIR filter config variables.
2016-01-10 20:20:07 -08:00
Jared Boone
13d260f936
Add IIR passthrough filter config.
2016-01-10 20:18:12 -08:00
Jared Boone
5dac0bbe49
Squelch special case when threshold == 0, do not squelch.
2016-01-10 20:16:21 -08:00
Jared Boone
01df79641c
Rename squelch algorithm variable for clarity.
...
Helps to understand meaning of threshold.
2016-01-10 20:14:26 -08:00
Jared Boone
6f00687d88
Add configure() for IIR filter.
2016-01-10 20:11:27 -08:00
Jared Boone
497adda390
IIR default constructor passes no audio.
...
Debugging mechanism -- filter must be configured to pass audio.
2016-01-10 20:11:05 -08:00
Jared Boone
172a6da36c
Unconst IIR configuration and filter.
2016-01-10 20:06:58 -08:00
Jared Boone
eb5b2d7d30
Fix broken audio stats when audio is muted.
2016-01-10 11:34:06 -08:00
Jared Boone
4ea84301c6
For non-audio modes, don't bother muting audio.
...
It's assumed base class will start with audio muted.
2016-01-10 11:33:44 -08:00
Jared Boone
d6f797540d
Remove baseband message from queue after it is processed.
...
Application code can now wait on queue empty and know the baseband's state.
2016-01-10 11:15:37 -08:00
Jared Boone
136ba895ef
Clear spectrum FIFO when streaming is stopped.
2016-01-10 11:00:09 -08:00
Jared Boone
62e5ec1dbb
Postpone clearing channel_spectrum_request_update until finished with data in array.
...
There was potential for new samples to be copied into array as the FFT and post-processing were occuring.
2016-01-10 10:45:22 -08:00
Jared Boone
d821afc60d
Spectrum streaming control, spectrum attributes back in each frame.
...
TODO: This feels kinda complex, and there's some repeated Processor code that needs to be refactored into a base class.
2016-01-10 10:42:20 -08:00
Jared Boone
0647f26707
Move SGPIO configuration and control to baseband firmware.
...
Addresses long-standing and annoying bug where SGPIO DMA channel would not disable -- and not configure cleanly next time it was needed. My theory is that the DMA channel couldn't disable until it got a request from the peripheral, and sometimes the peripheral was disabled before that last request.
Anyway, the baseband firmware should control the SGPIO, methinks, despite the impact on baseband code size.
2016-01-10 10:23:39 -08:00
Jared Boone
c75c167c25
Rename GPDMA channel disable_force() to disable().
...
There was nothing particularly forceful about the disable_force() code. Whether it's a "forced" operation depends on what happens before and after (HALT and ACTIVE flags are involved in a smooth disabling of the channel).
2016-01-10 10:11:16 -08:00
Jared Boone
365c2ef946
Handle baseband::dma::wait_for_rx_buffer() returning empty buffer.
...
Was technically OK before, because sample count was zero. But seems silly (and vaguely dangerous) to call all that code with a nullptr.
2016-01-09 12:20:57 -08:00
Jared Boone
7710b2d1fa
ChannelSpectrumConfig message subsumes FIFONotify.
...
Separate channel spectrum config from spectrum data. This will permit sending config info only when necessary.
Use type information of ChannelSpectrum to statically define number of FFT bins elsewhere.
TODO: Posting configuration message way too often. Fixing that is the next step.
2016-01-06 12:10:30 -08:00
Jared Boone
aaa1bc3a09
Transmit ChannelSpectrum data through separate FIFO.
...
Allows handling of data during LCD "vertical retrace", independent of other baseband->application messages. A bit kludgy still...
2016-01-06 11:34:41 -08:00
furrtek
496c77fe3e
Module loading should work again
...
Modules won't load if already loaded (dirty footprint hack)
2016-01-05 20:17:55 +01:00
furrtek
3477a2691a
Added missing files, ENUMed modulation modes
2016-01-05 11:47:46 +01:00
Jared Boone
dcb2c46c57
Add wideband FM spectrum waterfall.
2016-01-04 17:27:18 -08:00
Jared Boone
36021689f9
Remove commented, dead code.
2016-01-04 15:42:19 -08:00
Jared Boone
73671ca5f6
Update sample rate and buffer size comments in execute() methods.
2016-01-04 15:41:49 -08:00
Jared Boone
c1e5577669
Eliminate duplicate code between event_m4.hpp, event.hpp.
...
event.* is common code, _m0 and _m4 contain specific event mask definitions.
2016-01-04 12:54:05 -08:00
Jared Boone
229c1e9a3c
Move M4 MAPP IRQ handler to be with the event handler class.
...
event.[ch]pp and event_m4.[ch]pp are looking almost the same now...
2016-01-04 12:44:28 -08:00
Jared Boone
a27489eb21
Consolidating M4-specific saturation flag code.
2016-01-04 12:00:52 -08:00
Jared Boone
b42d3cc9d5
Move BasebandStatsCollector code into .cpp, as much as possible.
...
Still have template for callback, but hopefully will mitigate bloat when BasebandStatsCollector is used in multiple places.
2016-01-04 11:49:39 -08:00
Jared Boone
6d3cdb9bbf
Separate template/callback code from method code.
...
...for more small reductions in code size.
2016-01-04 11:45:33 -08:00
Jared Boone
cd3a5afdb1
More templating elimination (MatchedFilter), some #include clean-up.
...
592 bytes!
2016-01-04 11:32:47 -08:00
Jared Boone
e6f69c90f2
Reduce inlining of FIR configuration due to templating.
...
80 bytes!
2016-01-04 11:20:28 -08:00
Jared Boone
359fb6f3c6
...and more pass-by-reference.
...
Another 176 bytes!
2016-01-04 11:04:28 -08:00
Jared Boone
05a1c22426
More tweaks to pass buffers by reference.
...
144 bytes less code!
2016-01-04 11:00:17 -08:00
Jared Boone
778e2d2381
A little code consolidation -- M0APP IRQ.
2016-01-04 10:12:18 -08:00
Jared Boone
cd17f414b7
ChannelDecimator now unused, remove from Makefile, remove commented code.
2016-01-04 09:49:48 -08:00
Jared Boone
168bd02dea
Move AudioStatsCollector code into .cpp.
2016-01-04 09:25:43 -08:00
Jared Boone
c5b234d9f6
Remove BasebandProcessor virtual method replaced by message.
2016-01-04 09:13:17 -08:00
Jared Boone
222b878629
Use BasebandProcessor::mute_audio(), remove I2S #include dependencies.
2016-01-04 09:07:07 -08:00
Jared Boone
ef6ae8ed94
Add mute_audio() function to baseband processor.
2016-01-04 09:06:17 -08:00
Jared Boone
8fb3ffaedc
Reorder squelch code to group things a bit more logically.
2016-01-04 09:01:51 -08:00
Jared Boone
b0855b3c4d
Pass buffers by reference to save significant text section code size.
...
752 bytes!
2016-01-03 23:09:06 -08:00
Jared Boone
b03da8d693
Fix calculation of work_audio_buffer item count.
2016-01-03 22:42:40 -08:00
Jared Boone
d9017530c6
Moved baseband temporary buffers back into class member variables.
...
Significant performance hit when declaring on stack. C++ wants to initialize std::array or even raw array with element constructors, was resulting in ~7% CPU utilization, for a buffer that was immediately written over anyway.
2016-01-03 22:31:44 -08:00
Jared Boone
78992c2f8d
Adjust default FM squelch threshold.
2016-01-03 17:05:00 -08:00
Jared Boone
8adaddac5f
Make FM squelch runtime-configurable.
2016-01-03 17:03:16 -08:00
Jared Boone
86cf967464
Simplify FM demodulator class. Remove duplicate code.
2016-01-03 16:58:36 -08:00
Jared Boone
10bce4b845
Clean up #includes.
2016-01-03 16:58:08 -08:00
Jared Boone
28be223ace
Fix for merge-breakage. Argh.
2016-01-03 16:37:47 -08:00
Jared Boone
3f299c74c6
More old GCC fussiness fixes.
2016-01-03 16:32:45 -08:00
Jared Boone
b5aa2b205f
Implement AMConfigureMessage from M0 to M4.
2016-01-03 14:31:39 -08:00
Jared Boone
f2f7032615
Wideband FM configuration messages from M0.
2016-01-03 13:38:55 -08:00
Jared Boone
317ec53638
Handle NBFM configuration message on M4 processor side.
2016-01-03 12:49:00 -08:00
Jared Boone
a5012427d8
Remove little bit of dead code.
2016-01-03 12:45:34 -08:00
Jared Boone
c179b9e1cd
Move FIR filter configs to common/, so M0 can use it.
...
Planning to pass from M0 to M4 so M4 doesn't need to keep all these different filter configs in text section.
2016-01-03 12:45:15 -08:00
Jared Boone
39ca6fec62
Transform update spectrum event into message.
2016-01-03 12:05:47 -08:00
Jared Boone
c9f9d97d07
Move BasebandConfiguration message handling into baseband thread.
2016-01-03 11:49:01 -08:00
Jared Boone
fd612dc207
Baseband: Pass unhandled messages to baseband thread, processor.
2016-01-02 22:59:31 -08:00
Jared Boone
07cd99d85d
Removing baseband MessageHandlerMap.
...
It's a bit heavy (362 bytes smaller with switch/case implementation), hard to access to add/remove handlers, doesn't bubble events like I'd like. (I'm going to bubble events to the baseband processor shortly.)
2016-01-02 22:54:09 -08:00
furrtek
802ac496e9
Xylos (CCIR tones) TX, jammer update, SD card mod load
...
Xylos TX (CCIR tones) ;)
Jammer update, still buggy and inefficient
SD card module loader update
2016-01-03 07:24:30 +01:00
Jared Boone
fea5dd536f
Move baseband working buffers from member variables to stack.
...
It's temporary, after all...
2016-01-02 12:08:21 -08:00
Jared Boone
e7be7c5121
Comments about IFIR filter taps design parameters.
2016-01-02 10:49:37 -08:00
Jared Boone
410d4d7fc3
Use IFIR decimator for TPMS.
2016-01-02 10:42:40 -08:00
Jared Boone
e720bfb054
Use IFIR decimation for broadcast FM receiver.
2016-01-02 10:35:23 -08:00
Jared Boone
a02bfe55d0
Decimators for wider IFIR output bandwidth.
2016-01-02 10:34:17 -08:00
Jared Boone
096ebe47d8
Turn almost-zeros in TPMS matched filter to actual zeros.
2016-01-02 10:24:49 -08:00
Jared Boone
0e04939439
Broadcast FM de-emphasis using 75us time constant.
2016-01-01 20:56:30 -08:00
Jared Boone
2e90edbf39
Add 30Hz high-pass IIR filter for wideband FM.
2016-01-01 20:55:00 -08:00
Jared Boone
9a0fb2cab7
Rename IIR filter for 300Hz high-pass.
2016-01-01 20:53:11 -08:00
Jared Boone
ff05833b02
Use new decimation filters in AIS processor.
2016-01-01 13:20:02 -08:00