Commit Graph

1408 Commits

Author SHA1 Message Date
Timo Taskinen
50bd08d9ff
Fix AM bandwidth and sampling rate in scanner (#671)
In scanner app, the bandwidth and sampling rate for AM modulation was incorrect. This resulted in high pitched and distorted sound. I have now copied the settings from the Audio receiver app, and now the sound in Scanner sounds good also in AM mode.
2022-06-07 11:05:17 +12:00
jLynx
39134b62c3
Fix for new H2+ devices (#666)
* WIP Fix for new h2+ devices

* reset

* Updated sub module
2022-06-05 14:15:44 +12:00
Jared Boone
e5a30b4309
Persistent memory check value verification, defaulting when fails. (#662)
* Make default constructor for touch calibration

* Add persistent memory check value and access abstraction.

* Add persistent data_t default constructor with reasonable defaults.

* serial_format_t default constructor.

* Tidy up backlight timeout type.

* Add persistent data struct version/checking.

* Make range_t functions constexpr.

* Move ui_config and functions into class.

* Add backlight_config_t struct, separate enable and time settings.
2022-05-29 08:55:18 +12:00
ArjanOnwezen
a3ee160e27
Merge pull request #643 from ArjanOnwezen/save-more-app-settings
Save most common settings for TX apps
2022-05-13 21:42:51 +02:00
Arjan Onwezen
ade0d6c68f French translations. 2022-05-13 09:31:58 -04:00
Arjan Onwezen
e97ffd42ef Set fixed modulation (WFM) for Pocsag app. 2022-05-13 09:04:53 -04:00
Arjan Onwezen
cccc92cc34 Save most common settings for TX apps. And translated some French apps along the way. 2022-05-13 08:38:04 -04:00
Brumi-2021
de1570d8af
Allow change initial gain amp values just opened file (#634)
* Update spectrum_collector.cpp

lower case correction

* Update spectrum_collector.cpp

Description changed , better explanation.

* Revert "Update spectrum_collector.cpp"

This reverts commit 4a6fc35384.

* Revert "Update spectrum_collector.cpp"

This reverts commit 35cece1cb0.

* Revert "Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax."

This reverts commit f4db4e2b53.

* Allow initial GAIN ,AMP changes after opened  file
2022-05-07 11:43:55 +12:00
Brumi-2021
1027e80d53
Recovered lost ctcss/roger beep/correct mic gain in mic app from 1.5.1 without ALC (Auto mic Limit Control-AK) (#633)
* Update spectrum_collector.cpp

lower case correction

* Update spectrum_collector.cpp

Description changed , better explanation.

* Revert "Update spectrum_collector.cpp"

This reverts commit 4a6fc35384.

* Revert "Update spectrum_collector.cpp"

This reverts commit 35cece1cb0.

* Revert "Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax."

This reverts commit f4db4e2b53.

* Recovered CTCSS-Roger_beep-MIC-GAIN from 1.5.1

* Temporary removing ALC-( for AK4951 platorm)
2022-05-07 11:43:14 +12:00
TqMatvey
367cb318cd Fix KeyFob (beta) being off-screen 2022-05-05 18:06:15 +07:00
jLynx
fe33c12111
Sound/white noise Clock fix (#625) 2022-05-05 08:31:54 +12:00
GullCode
5551c6a676 Fixing branch, moving block, adding quote 2022-05-04 10:29:12 +02:00
GullCode
2b7b0d028a Merge branch 'touch_return_option' of github.com:GullCode/portapack-mayhem into touch_return_option 2022-05-03 14:42:40 +02:00
GullCode
7b42d9ec94 changed label to fit the screen 2022-05-03 14:34:55 +02:00
GullCode
0580a528e4
Merge branch 'next' into touch_return_option 2022-05-03 14:31:03 +02:00
GullCode
c75c4685cd Added a ui_config flag to manage gui return icon status 2022-05-03 14:23:58 +02:00
Arjan Onwezen
799a473b36 Save individual app settings. Currently only for apps in Receive section and basic settings like, LNA, VGA, Rx Amp and Frequency. 2022-05-01 06:09:02 -04:00
Žiga Deisinger
ee9b4c89bd Fix #494 - Change App Titles
I choose what I think are the best Titles based on existing titles/class names and so on. There were also inconsistencies between TX and Transmit and RX and receive. I renamed them to shorter version TX and RX also added it as suffix where possible to make it clearer in what mode you are in. If you have any other title suggestions or changes please use Add comment on Files Changed Screen so I can change it.
2022-04-26 23:09:24 +02:00
Erwin Ried
35ed394b37
Merge pull request #601 from GullCode/ais_app-warning-fix
Added missing contructors/operators/etc in ais_app
2022-04-22 09:59:01 +02:00
Erwin Ried
4c98cf16a1
Merge pull request #600 from GullCode/ui_qrcode-warning-fix
Fix for weffc++
2022-04-22 08:19:43 +02:00
GullCode
de042df7eb Added missing initializer 2022-04-21 23:12:37 +02:00
GullCode
2fbf96425a Added missing contructors/operators/etc in ais_app 2022-04-21 22:52:17 +02:00
GullCode
85d5a8fdba Fix for weffc++ 2022-04-21 22:27:20 +02:00
GullCode
c37df0c6fd Fix for warning XXX should be initialized in the member initialization list 2022-04-19 17:23:30 +02:00
Erwin Ried
1537b1eccb
Merge pull request #589 from GullCode/qrcode-warning-fix
Qrcode warning fix
2022-04-18 23:29:08 +02:00
GullCode
5cdaac6b82 Fix uneeded negative test because type is uint ( warning: comparison is always false due to limited range of data type) 2022-04-18 22:33:10 +02:00
GullCode
17aa58bbf8 Changed pramga to comments to fix warning: ignoring #pragma mark [-Wunknown-pragmas] 2022-04-18 22:32:43 +02:00
jLynx
178528ef96
Fixed no audio issue v2 (#567)
* Fixed no audio issue v2 (#567)
2022-04-12 09:28:36 +12:00
jLynx
5d9a2e560b
SD card backup storage (#565)
* Got SD card mounting during boot

* Cleaned up comments

* Now loads settings from SD as backup

* Now loads settings from SD as backup

* linting

* refactoring
2022-04-11 21:42:56 +12:00
Arjan Onwezen
8c1593fab9 Added cancel button in UI settings. 2022-04-08 17:50:21 -04:00
ArjanOnwezen
a9d2b2ff8a
Merge branch 'next' into feature/disableTouch 2022-04-08 16:10:55 +02:00
Arjan Onwezen
efdefa85be Quick fix (as figures out by @bluegizmo83) to make sure WM8731S chips don't stay silent after pause in scanner app. 2022-04-08 09:51:41 -04:00
Arjan Onwezen
6697d2533c Added support for LARGE qr code. 2022-04-08 08:38:32 -04:00
jLynx
9d5ed65f6b Added the most random fix 2022-04-08 12:42:12 +12:00
jLynx
2ba74d0413 What did I change? 2022-04-08 12:31:06 +12:00
jLynx
59d08a4203 Enabled auto detection again 2022-04-07 21:30:37 +12:00
jLynx
51bc0f0100 Fixed broken radio offset 2022-04-07 21:22:47 +12:00
jLynx
2d3cb426ba Stores in memory 2022-04-07 09:11:10 +12:00
jLynx
dd2fdecb21 removed commented lines 2022-04-07 08:48:00 +12:00
jLynx
a37ba1ee2b 2021/12 QFP100 fix 2022-04-07 08:41:46 +12:00
jLynx
0c0d47b0d2 Added persistent memory of save state 2022-04-06 13:28:10 +12:00
jLynx
50821bab55 Added button on boot detection 2022-04-06 08:16:57 +12:00
jLynx
796d9ca854 Updated comments 2022-04-05 14:44:32 +12:00
jLynx
fd8bc177ad Added support for H2+ 2022-04-05 14:41:12 +12:00
jLynx
f6c496d1d3 removed comments 2022-04-05 10:56:09 +12:00
jLynx
b4a6b958e5 Fixed R1_20150901 vs R2_20170522 boot & detection issues 2022-04-05 10:53:52 +12:00
jLynx
43e9ce4704 Fixed R1_20150901 vs R2_20170522 boot & detection issues 2022-04-05 10:52:42 +12:00
jLynx
9200db24be WIP 2022-04-02 22:02:05 +13:00
jLynx
03057546e1 WIP 2022-04-02 22:00:46 +13:00
jLynx
3601545712
Updated to say 433 as it's not 434 2022-04-01 22:22:25 +13:00