TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-12-14 12:08:40 +00:00
Code Issues Packages Projects Releases Wiki Activity
1,728 Commits 2 Branches 487 Tags 423 MiB
17b238f3a8
Commit Graph

62 Commits

Author SHA1 Message Date
Jared Boone
1eb6f10fa6 CPLD: Finish the job of renaming MCU_LCD_(RD|WR). 
Caused issue #114, presumably due to RDX being assigned to an unused pin, which was pulled high, and was therefore never asserted.
 2017-08-11 14:59:48 -07:00
Jared Boone
8916550e9e CPLD: Enable PCI_IO clamp, unnecessary for LCD_BACKLIGHT signal. 2017-07-20 16:35:17 -07:00
Jared Boone
751ae92509 CPLD: Switch sense of LCD_RD/WR pins. 
Should keep CPLD settled when in HackRF mode.
 2017-07-20 16:33:55 -07:00
Jared Boone
8bc878c5e5 CPLD: Update 20150901 bitstream due to Makefile changes. 
Not sure if any changes have actual significance, but...
 2017-07-18 22:08:49 -07:00
Jared Boone
f4744e651b CPLD: Match 20150901 constraints to newer project. 2017-07-17 16:50:26 -07:00
Jared Boone
96c77252c1 Hardware: PCB layout for revision 20170522. 2017-06-19 16:31:54 -07:00
Jared Boone
259348259b Hardware: Schematic for PP H1 revision 20170522. 2017-06-19 16:31:54 -07:00
Jared Boone
1668d4ff7a Case: Make clearances on all sides of PCB into separate variables. 2017-06-19 16:31:54 -07:00
Jared Boone
b0f411f8a4 Case: Separate LED drill diameter into a "parameters" file variable. 2017-06-19 16:31:54 -07:00
Jared Boone
0117962a51 Case: Change board outline to add buffer for H1 LED diffuser. 2017-06-19 16:31:54 -07:00
Jared Boone
626835297b Case: Remove extra mounting hole from PortaPack model. 2017-06-19 16:31:54 -07:00
Jared Boone
a14f764665 CPLD: Update LCD thickness, expected lid thickness to 3/16". 
Objective is to keep LCD face below plane of case top/lid.
 2017-06-19 16:31:54 -07:00
Jared Boone
8b10fde116 Case: Update spacer height. 2017-06-19 16:31:54 -07:00
Jared Boone
3e8a3d8b9a Case: Clean up boss drills. 2017-06-19 16:31:54 -07:00
Jared Boone
b0b027d557 Case: Adjust feet emboss to match manufactured units. 2017-06-19 16:31:54 -07:00
Jared Boone
023a68ba1d Case: Remove two bosses in center and along side of PCB. 2017-06-19 16:31:54 -07:00
Jared Boone
f4fdc21c20 PCB: Remove series resistors. 
Not sure they're of much benefit.
 2017-06-19 16:31:54 -07:00
Jared Boone
d1517702b7 PCB: Remove H1 (fifth hole). 2017-06-19 16:31:54 -07:00
Jared Boone
492a704e91 PCB: Interim revision number/date. 2017-06-19 16:31:54 -07:00
Jared Boone
b3c21c3762 CPLD: Ask Quartus to use maximum number of processors. 2017-06-13 21:21:25 -07:00
Jared Boone
9a0fa128c0 CPLD: Clean up *.qws files. 2017-06-13 21:20:19 -07:00
Jared Boone
76c2cc77af CPLD: Move around some .gitignores. 2017-06-01 15:20:16 -07:00
Jared Boone
797e63a590 CPLD: Use correct bitstream for updating hardware. 
Determine hardware version and use one of two CPLD bitstream files.
 2017-05-31 22:28:07 -07:00
Jared Boone
73d62367d1 CPLD: Makefiles for both hardware variants. 2017-05-31 21:05:47 -07:00
Jared Boone
7c715ed913 CPLD: HDL for 20170522 hardware variant. 2017-05-31 15:21:25 -07:00
Jared Boone
0fd52a7483 CPLD: Move HDL project to hardware revision-specific directory. 2017-05-31 11:50:59 -07:00
Jared Boone
2add96d42d CPLD: Add .svf output file so CMake can generate data for firmware. 2016-07-10 15:01:04 -07:00
Jared Boone
805442d46f Allow KiCad to update metadata. 2015-09-01 11:10:50 -07:00
Jared Boone
d9568f7f47 Update date code to 20150901. 2015-09-01 11:09:19 -07:00
Jared Boone
1c2b3b82ce Update layers exported during PCB plot. 2015-09-01 10:17:30 -07:00
Jared Boone
73e9dabf72 Change default layer visibility. 2015-09-01 10:14:36 -07:00
Jared Boone
f3f5a9647b Board stack-up drawing clean-up. 2015-09-01 10:13:51 -07:00
Jared Boone
e979b9b64d Change drawing lines width to 0.1mm. 2015-09-01 10:02:07 -07:00
Jared Boone
968ec6d176 Change PCB stack-up for vendor. 2015-09-01 10:01:39 -07:00
Jared Boone
128dda23bb Note about separate PTH and NPTH drill files. 2015-08-30 17:23:53 -07:00
Jared Boone
85f9b4cdc5 Add default dimension units note. 2015-08-30 17:18:14 -07:00
Jared Boone
c5cd3a4498 Add title block with copyright, license. 2015-08-30 17:12:32 -07:00
Jared Boone
d2436ca229 Add notes block. 2015-08-30 17:11:59 -07:00
Jared Boone
18b272bcab Add PCB dimensions 2015-08-30 16:24:07 -07:00
Jared Boone
d3acd79df8 Add PCB stack data and diagram. 2015-08-30 16:23:55 -07:00
Jared Boone
375cf6f238 Tighten solder mask around LCD connector. 
Shooting for 4mil mask web between pads.
 2015-08-30 14:35:04 -07:00
Jared Boone
84b92365f9 Move and shrink copper layer legend. 
Doesn't need to be visible after assembly. I think.
 2015-08-30 10:14:36 -07:00
Jared Boone
ea2cfb7ad2 Center text in layer legend. 2015-08-30 09:42:47 -07:00
Jared Boone
732561d01c Change vias to 13mil, 7mil annular ring. 
Was 13.5mm, but why?!?
 2015-08-29 22:31:29 -07:00
Jared Boone
1340991dba Reduce solder mask margin on WM8731. 
Trying to squeeze some mask web in there!
 2015-08-29 18:14:23 -07:00
Jared Boone
56c7c31cbb More footprint units cleanup. 2015-08-29 17:54:26 -07:00
Jared Boone
bda376df4b KiCad added courtyard layers. 2015-08-29 17:20:41 -07:00
Jared Boone
436e6fd21b Footprint cleanup 
Remove courtyard lines from silkscreen.
Round coordinates/dimensions to correct values (KiCad's old units don't convert nicely to the new units).
Restore U3 refdes silkscreen visibility.
 2015-08-29 17:14:06 -07:00
Jared Boone
c78b7fe196 Reduce mask margin on QFP pads. 2015-08-29 16:12:45 -07:00
Jared Boone
d61f3802cb Remove line in/out components and traces, microphone. 
Clean up traces and via stitching affected by removed components.
 2015-08-27 16:54:38 -07:00