Commit Graph

644 Commits

Author SHA1 Message Date
Jared Boone
293337b647 Init radio in RX mode, not TX mode. 2015-09-02 17:30:16 -07:00
Jared Boone
e2bb77d756 Change wideband FFT bin filter, clean up code a bit. 2015-09-02 11:29:38 -07:00
Jared Boone
c4de9c4423 Mute audio whenever baseband mode is changed. 2015-09-01 21:05:47 -07:00
Jared Boone
c52de7abe6 Clean up baseband/RSSI streaming control.
Address hang-up of baseband and RSSI when switching modulation modes really fast.
2015-09-01 21:05:32 -07:00
Jared Boone
687e627dae Mechanism to clear waterfall when switching modulations. 2015-09-01 21:04:27 -07:00
Jared Boone
d4c85bd786 Move receiver "back" button to separate row. 2015-09-01 20:38:59 -07:00
Jared Boone
24e398ca62 Add HackRF mode explanation text. 2015-09-01 20:23:11 -07:00
Jared Boone
250da67d0f Remove region, put in environment variables. 2015-09-01 15:47:08 -07:00
Jared Boone
2c778b72e2 Wrong S3 region. 2015-09-01 15:15:24 -07:00
Jared Boone
72a59c3dae Fix cwd when uploading release files. 2015-09-01 15:07:31 -07:00
Jared Boone
a06ee31566 Make release and post on S3. 2015-09-01 14:53:40 -07:00
Jared Boone
57ec7aac41 Remove container stuff. 2015-09-01 14:53:40 -07:00
Jared Boone
340fc4dd83 Override compilers. 2015-09-01 14:53:40 -07:00
Jared Boone
61d765aeac before_install vs. before_script? No idea... 2015-09-01 14:53:40 -07:00
Jared Boone
e96895d18c Container's not flexible enough, back to the old approach. 2015-09-01 14:53:40 -07:00
Jared Boone
e0c313b240 Switch to shiny container. 2015-09-01 14:53:40 -07:00
Jared Boone
8b465a593e Whitespace, huh? OK... 2015-09-01 14:53:40 -07:00
Jared Boone
0f39d52f48 More Travis CI stumbling. 2015-09-01 14:53:39 -07:00
Jared Boone
92674706ed Oops, bad Travis CI .yml syntax. 2015-09-01 14:53:39 -07:00
Jared Boone
0fd2dcf04a Experimenting with Travis CI for firmware builds. 2015-09-01 14:53:39 -07:00
Jared Boone
4846557f12 Missed spots when renaming REVISION to GIT_REVISION. 2015-09-01 14:21:40 -07:00
Jared Boone
5d8c636f40 Halt M4 right after sending M0 the shutdown message.
Addresses issue #55.
2015-09-01 13:49:09 -07:00
Jared Boone
805442d46f Allow KiCad to update metadata. 2015-09-01 11:10:50 -07:00
Jared Boone
d9568f7f47 Update date code to 20150901. 2015-09-01 11:09:19 -07:00
Jared Boone
1c2b3b82ce Update layers exported during PCB plot. 2015-09-01 10:17:30 -07:00
Jared Boone
73e9dabf72 Change default layer visibility. 2015-09-01 10:14:36 -07:00
Jared Boone
f3f5a9647b Board stack-up drawing clean-up. 2015-09-01 10:13:51 -07:00
Jared Boone
e979b9b64d Change drawing lines width to 0.1mm. 2015-09-01 10:02:07 -07:00
Jared Boone
968ec6d176 Change PCB stack-up for vendor. 2015-09-01 10:01:39 -07:00
Jared Boone
128dda23bb Note about separate PTH and NPTH drill files. 2015-08-30 17:23:53 -07:00
Jared Boone
85f9b4cdc5 Add default dimension units note. 2015-08-30 17:18:14 -07:00
Jared Boone
c5cd3a4498 Add title block with copyright, license. 2015-08-30 17:12:32 -07:00
Jared Boone
d2436ca229 Add notes block. 2015-08-30 17:11:59 -07:00
Jared Boone
18b272bcab Add PCB dimensions 2015-08-30 16:24:07 -07:00
Jared Boone
d3acd79df8 Add PCB stack data and diagram. 2015-08-30 16:23:55 -07:00
Jared Boone
375cf6f238 Tighten solder mask around LCD connector.
Shooting for 4mil mask web between pads.
2015-08-30 14:35:04 -07:00
Jared Boone
84b92365f9 Move and shrink copper layer legend.
Doesn't need to be visible after assembly. I think.
2015-08-30 10:14:36 -07:00
Jared Boone
ea2cfb7ad2 Center text in layer legend. 2015-08-30 09:42:47 -07:00
Jared Boone
732561d01c Change vias to 13mil, 7mil annular ring.
Was 13.5mm, but why?!?
2015-08-29 22:31:29 -07:00
Jared Boone
1340991dba Reduce solder mask margin on WM8731.
Trying to squeeze some mask web in there!
2015-08-29 18:14:23 -07:00
Jared Boone
56c7c31cbb More footprint units cleanup. 2015-08-29 17:54:26 -07:00
Jared Boone
bda376df4b KiCad added courtyard layers. 2015-08-29 17:20:41 -07:00
Jared Boone
436e6fd21b Footprint cleanup
Remove courtyard lines from silkscreen.
Round coordinates/dimensions to correct values (KiCad's old units don't convert nicely to the new units).
Restore U3 refdes silkscreen visibility.
2015-08-29 17:14:06 -07:00
Jared Boone
c78b7fe196 Reduce mask margin on QFP pads. 2015-08-29 16:12:45 -07:00
Jared Boone
d61f3802cb Remove line in/out components and traces, microphone.
Clean up traces and via stitching affected by removed components.
2015-08-27 16:54:38 -07:00
Jared Boone
29243a5fd1 Schematic and netlist from schematic modifications. 2015-08-27 16:54:38 -07:00
Jared Boone
70d7ecc51b Clean up PCB net labels to match code, CPLD. 2015-08-27 16:54:38 -07:00
Jared Boone
75d9aa9c73 Remove extra CPLD code internal signals. 2015-08-27 16:54:38 -07:00
Jared Boone
19764ce693 Swap function of P2_8, P2_4 in schematic, firmware, CPLD.
gpio_unused: P2_4 -> P2_8
gpio_lcd_rd: P2_8 -> P2_4
P2_8 is a very long line, shared with DFU button.
Revise schematic to match CPLD signal names.
2015-08-27 16:54:38 -07:00
Jared Boone
b6e25692dc Label 1V8 regulator bypass/adjust capacitor as DNI.
Was already DNI in assembly BOM. TCR2EF shows that pin as NC.
2015-08-27 16:54:38 -07:00