Brumi-2021
6087c658e9
Applied ghost-signal c/m to all remaining TX Apps
2022-08-27 17:47:24 +02:00
Brumi-2021
08a108d3e4
First test, ghost-singal c/m to only Mic_App
2022-08-26 18:34:30 +02:00
Brumi-2021
5021a03572
Minor change radio,disable-->receiver.disable
2022-08-23 00:04:48 +02:00
Brumi-2021
961a4c4588
Addition_bias_DC_ERP_TPMS
2022-08-21 19:59:15 +02:00
Arne Luehrs
a89d418202
AIS Decoding, destination text display fix
...
Remove trailing null characters '@' from display of destination field
2022-08-15 14:41:07 +08:00
Arne Luehrs
1e14ca4df1
Enable AIS-B decoding and display
...
Implement decoding for AIS messages 18 and 24A 24B
clean up display of text messages by removing the trailing null
character '@'
2022-08-15 13:56:40 +08:00
Arne Luehrs
5096f91986
Add AIS Class B Decoding
2022-08-15 00:12:24 +08:00
andrej
87418703e0
Make clk and frame duration steps in OOK configurable
2022-08-01 08:40:26 +02:00
andrej
e33c98cbc7
Increase maximum OOK clock to 1000 kHz
2022-08-01 08:40:16 +02:00
Timo Taskinen
50bd08d9ff
Fix AM bandwidth and sampling rate in scanner ( #671 )
...
In scanner app, the bandwidth and sampling rate for AM modulation was incorrect. This resulted in high pitched and distorted sound. I have now copied the settings from the Audio receiver app, and now the sound in Scanner sounds good also in AM mode.
2022-06-07 11:05:17 +12:00
jLynx
39134b62c3
Fix for new H2+ devices ( #666 )
...
* WIP Fix for new h2+ devices
* reset
* Updated sub module
2022-06-05 14:15:44 +12:00
Jared Boone
e5a30b4309
Persistent memory check value verification, defaulting when fails. ( #662 )
...
* Make default constructor for touch calibration
* Add persistent memory check value and access abstraction.
* Add persistent data_t default constructor with reasonable defaults.
* serial_format_t default constructor.
* Tidy up backlight timeout type.
* Add persistent data struct version/checking.
* Make range_t functions constexpr.
* Move ui_config and functions into class.
* Add backlight_config_t struct, separate enable and time settings.
2022-05-29 08:55:18 +12:00
Brumi-2021
379ad6dbf0
Recovered_ALC_Mic_Feature_AK4953_OK_WM8731
2022-05-28 22:29:10 +02:00
ArjanOnwezen
a3ee160e27
Merge pull request #643 from ArjanOnwezen/save-more-app-settings
...
Save most common settings for TX apps
2022-05-13 21:42:51 +02:00
Arjan Onwezen
ade0d6c68f
French translations.
2022-05-13 09:31:58 -04:00
Arjan Onwezen
e97ffd42ef
Set fixed modulation (WFM) for Pocsag app.
2022-05-13 09:04:53 -04:00
Arjan Onwezen
cccc92cc34
Save most common settings for TX apps. And translated some French apps along the way.
2022-05-13 08:38:04 -04:00
MattLodge
6c5f8a38e0
Update generate_world_map.bin.py ( #640 )
...
Use bytes instead of strings to write ADSB map binary for python3
2022-05-09 07:27:15 +12:00
Brumi-2021
de1570d8af
Allow change initial gain amp values just opened file ( #634 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc3538435cece1cb0f4db4e2b53
2022-05-07 11:43:55 +12:00
Brumi-2021
1027e80d53
Recovered lost ctcss/roger beep/correct mic gain in mic app from 1.5.1 without ALC (Auto mic Limit Control-AK) ( #633 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc3538435cece1cb0f4db4e2b53
2022-05-07 11:43:14 +12:00
TqMatvey
367cb318cd
Fix KeyFob (beta) being off-screen
2022-05-05 18:06:15 +07:00
jLynx
fe33c12111
Sound/white noise Clock fix ( #625 )
2022-05-05 08:31:54 +12:00
GullCode
5551c6a676
Fixing branch, moving block, adding quote
2022-05-04 10:29:12 +02:00
GullCode
2b7b0d028a
Merge branch 'touch_return_option' of github.com:GullCode/portapack-mayhem into touch_return_option
2022-05-03 14:42:40 +02:00
GullCode
7b42d9ec94
changed label to fit the screen
2022-05-03 14:34:55 +02:00
GullCode
0580a528e4
Merge branch 'next' into touch_return_option
2022-05-03 14:31:03 +02:00
GullCode
c75c4685cd
Added a ui_config flag to manage gui return icon status
2022-05-03 14:23:58 +02:00
Arjan Onwezen
799a473b36
Save individual app settings. Currently only for apps in Receive section and basic settings like, LNA, VGA, Rx Amp and Frequency.
2022-05-01 06:09:02 -04:00
Jimi Sanchez
2efab19bf6
Merge branch 'next' of https://github.com/jimilinuxguy/portapack-mayhem into next
2022-04-28 17:06:50 -04:00
Jimi Sanchez
4562228b55
Fixing spelling of Wav Viewer
2022-04-28 17:06:45 -04:00
Jimi Sanchez
6af0d4e751
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 17:03:24 -04:00
Jimi Sanchez
0fed174a80
Adding back wipe sd
2022-04-28 16:58:44 -04:00
Jimi Sanchez
d71c759480
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 13:55:44 -04:00
Jimi Sanchez
c1e568f62c
Removing wipe sd
2022-04-28 13:54:17 -04:00
Jimi Sanchez
f48980e381
Adding playlist to CMakeLists
2022-04-28 13:52:47 -04:00
Žiga Deisinger
ee9b4c89bd
Fix #494 - Change App Titles
...
I choose what I think are the best Titles based on existing titles/class names and so on. There were also inconsistencies between TX and Transmit and RX and receive. I renamed them to shorter version TX and RX also added it as suffix where possible to make it clearer in what mode you are in. If you have any other title suggestions or changes please use Add comment on Files Changed Screen so I can change it.
2022-04-26 23:09:24 +02:00
Erwin Ried
a91bbe6a2e
Merge pull request #596 from GullCode/proc-adsbrx-warning-fix
...
Fix for warning: comparison of integer expressions of different signedness
2022-04-22 10:00:05 +02:00
Erwin Ried
a5a9bc85f8
Merge pull request #597 from GullCode/proc-aprsrx-warning-fix
...
Fix for proc_aprsrx and aprs_packet warnings, they are related
2022-04-22 09:59:31 +02:00
Erwin Ried
b23addd452
Merge pull request #598 from GullCode/tpms-warning-fix
...
Fix for warning: narrowing conversion
2022-04-22 09:59:21 +02:00
Erwin Ried
6467e5e7e6
Merge pull request #599 from GullCode/proc_mictx-warning-fix
...
Fix for warning: 'MicTXProcessor::modulator' should be initialized
2022-04-22 09:59:08 +02:00
Erwin Ried
35ed394b37
Merge pull request #601 from GullCode/ais_app-warning-fix
...
Added missing contructors/operators/etc in ais_app
2022-04-22 09:59:01 +02:00
Erwin Ried
4c98cf16a1
Merge pull request #600 from GullCode/ui_qrcode-warning-fix
...
Fix for weffc++
2022-04-22 08:19:43 +02:00
Erwin Ried
18be6750e5
Merge pull request #602 from GullCode/ui_adsb_rx-warning-fix
...
Added missing initializer
2022-04-22 08:19:03 +02:00
GullCode
3fa190324b
Fix warning for proc_pocsag
2022-04-21 23:25:58 +02:00
GullCode
de042df7eb
Added missing initializer
2022-04-21 23:12:37 +02:00
GullCode
2fbf96425a
Added missing contructors/operators/etc in ais_app
2022-04-21 22:52:17 +02:00
GullCode
85d5a8fdba
Fix for weffc++
2022-04-21 22:27:20 +02:00
GullCode
f13d1f8b9c
Fix for warning: 'MicTXProcessor::modulator' should be initialized
2022-04-21 21:46:55 +02:00
GullCode
f804d7997c
Fix for warning: narrowing conversion
2022-04-21 21:41:02 +02:00
GullCode
2108ea53fa
Fix for proc_aprsrx and aprs_packet warnings, they are related
2022-04-21 17:38:49 +02:00
GullCode
90d38af705
Fix for warning: comparison of integer expressions of different signedness
2022-04-21 17:29:42 +02:00
GullCode
c37df0c6fd
Fix for warning XXX should be initialized in the member initialization list
2022-04-19 17:23:30 +02:00
Erwin Ried
cdba4fa5bf
Merge pull request #590 from GullCode/a-packet-warning-fix
...
Fixed warning: comparison of integer expressions of different signedness
2022-04-18 23:29:41 +02:00
Erwin Ried
1537b1eccb
Merge pull request #589 from GullCode/qrcode-warning-fix
...
Qrcode warning fix
2022-04-18 23:29:08 +02:00
GullCode
048b254354
Fixed uninitialized class members
2022-04-18 22:45:16 +02:00
GullCode
4b87a8a7dd
Fixed warning: comparison of integer expressions of different signedness
2022-04-18 22:38:29 +02:00
GullCode
5cdaac6b82
Fix uneeded negative test because type is uint ( warning: comparison is always false due to limited range of data type)
2022-04-18 22:33:10 +02:00
GullCode
17aa58bbf8
Changed pramga to comments to fix warning: ignoring #pragma mark [-Wunknown-pragmas]
2022-04-18 22:32:43 +02:00
notpike
0e9c7448c0
Added GRC C16 to complex script
2022-04-17 11:05:20 -07:00
jLynx
178528ef96
Fixed no audio issue v2 ( #567 )
...
* Fixed no audio issue v2 (#567 )
2022-04-12 09:28:36 +12:00
jLynx
5d9a2e560b
SD card backup storage ( #565 )
...
* Got SD card mounting during boot
* Cleaned up comments
* Now loads settings from SD as backup
* Now loads settings from SD as backup
* linting
* refactoring
2022-04-11 21:42:56 +12:00
Arjan Onwezen
8c1593fab9
Added cancel button in UI settings.
2022-04-08 17:50:21 -04:00
ArjanOnwezen
a9d2b2ff8a
Merge branch 'next' into feature/disableTouch
2022-04-08 16:10:55 +02:00
Arjan Onwezen
efdefa85be
Quick fix (as figures out by @bluegizmo83) to make sure WM8731S chips don't stay silent after pause in scanner app.
2022-04-08 09:51:41 -04:00
Arjan Onwezen
6697d2533c
Added support for LARGE qr code.
2022-04-08 08:38:32 -04:00
jLynx
9d5ed65f6b
Added the most random fix
2022-04-08 12:42:12 +12:00
jLynx
2ba74d0413
What did I change?
2022-04-08 12:31:06 +12:00
jLynx
59d08a4203
Enabled auto detection again
2022-04-07 21:30:37 +12:00
jLynx
51bc0f0100
Fixed broken radio offset
2022-04-07 21:22:47 +12:00
jLynx
2d3cb426ba
Stores in memory
2022-04-07 09:11:10 +12:00
jLynx
dd2fdecb21
removed commented lines
2022-04-07 08:48:00 +12:00
jLynx
a37ba1ee2b
2021/12 QFP100 fix
2022-04-07 08:41:46 +12:00
jLynx
0c0d47b0d2
Added persistent memory of save state
2022-04-06 13:28:10 +12:00
jLynx
50821bab55
Added button on boot detection
2022-04-06 08:16:57 +12:00
jLynx
796d9ca854
Updated comments
2022-04-05 14:44:32 +12:00
jLynx
fd8bc177ad
Added support for H2+
2022-04-05 14:41:12 +12:00
jLynx
f6c496d1d3
removed comments
2022-04-05 10:56:09 +12:00
jLynx
b4a6b958e5
Fixed R1_20150901 vs R2_20170522 boot & detection issues
2022-04-05 10:53:52 +12:00
jLynx
43e9ce4704
Fixed R1_20150901 vs R2_20170522 boot & detection issues
2022-04-05 10:52:42 +12:00
Jimi Sanchez
584c46af64
Initial commit of playlist app for replaying capture files sequentially
2022-04-03 19:38:06 -04:00
jLynx
9200db24be
WIP
2022-04-02 22:02:05 +13:00
jLynx
03057546e1
WIP
2022-04-02 22:00:46 +13:00
ArjanOnwezen
eec4cd8778
Delete icao24.db
...
delete duplicated icao24.db, since it should only be placed in /sdcard/ASDB folder
2022-04-01 14:02:03 +02:00
ArjanOnwezen
d7a795b8f2
Delete mids.db
...
delete duplicate mids.db, since it should only be placed in /sdcard/AIS folder
2022-04-01 14:00:57 +02:00
jLynx
3601545712
Updated to say 433 as it's not 434
2022-04-01 22:22:25 +13:00
eried
759c4d9d51
Contributors update
2022-03-29 08:28:31 +02:00
eried
77a0d255dd
Version bump
2022-03-29 08:15:44 +02:00
NotPike
7066f931a8
Update ui_record_view.cpp
...
cleanup
2022-03-29 01:16:16 -04:00
NotPike
aa2c5a4c84
Update analog_audio_app.hpp
...
Forgot to take that include out. >_<
2022-03-29 00:34:52 -04:00
notpike
d70e1a6fac
Added Datetime + Freq Filename to Audio App
2022-03-28 20:53:09 -07:00
Erwin Ried
477e6d65df
Merge pull request #488 from ArjanOnwezen/improve-screen-navigation
...
Improvements to screen navigation
2022-03-28 10:10:46 +02:00
Erwin Ried
a55e5d4fc0
Merge pull request #497 from Brumi-2021/Solving_mic_saturation_and_spectrum_armonics_Mic_App
...
Solving_mic_saturation_and_spectrum_harmonics_Mic_App
2022-03-28 10:10:08 +02:00
Erwin Ried
8da0dbe36b
Merge pull request #519 from notpike/replay_antenna_bias
...
Replay App Enable Bias-tee
2022-03-28 10:09:51 +02:00
Erwin Ried
8688ac0e05
Merge pull request #520 from ArjanOnwezen/add-country-info-to-ais-app
...
Added country to AIS app, so you know from which country a vessel is.
2022-03-28 10:08:39 +02:00
Erwin Ried
82732a3f73
Merge pull request #512 from jLynx/PSI
...
TPMS toggle between PSI and kPa (v1)
2022-03-28 10:07:41 +02:00
Arjan Onwezen
be0427889f
Added country to AIS app, so you know from which country a vessel is.
...
It's using the MID database, which is also part of the PR.
mids.db should be placed in /AIS folder on SD card.
2022-03-27 12:34:26 -04:00
NotPike
37a40cbeda
Delete ui_newapp.hpp
2022-03-27 00:40:45 -04:00
notpike
4ef98e2928
Added Bias Tee support for Replay and fixed file error logic bug
2022-03-26 21:20:55 -07:00
notpike
434c559861
Added Bias Tee support for Replay and fixed file error logic bug
2022-03-26 21:20:49 -07:00
Erwin Ried
3cb3c95349
Merge pull request #516 from ArjanOnwezen/updated-airlines.db
...
updated airlines.db
2022-03-25 15:44:32 +01:00
Erwin Ried
979b5126a6
Merge pull request #517 from ArjanOnwezen/updated-icao24.db
...
updated icao24.db
2022-03-25 15:43:56 +01:00
Arjan Onwezen
8e3fa0b9ea
updated icao24.db
2022-03-25 10:18:22 -04:00
Arjan Onwezen
00b43299ad
updated airlines.db
2022-03-25 08:47:47 -04:00
jLynx
5c97c24b48
Added NZ to APRS
2022-03-24 20:36:39 +13:00
jLynx
4a8458d812
refactoring
2022-03-24 19:51:08 +13:00
jLynx
165efd7355
refactoring
2022-03-24 19:44:26 +13:00
jLynx
d1d1198b1b
refactoring
2022-03-24 19:43:26 +13:00
jLynx
0025ad2507
refactoring
2022-03-24 19:19:02 +13:00
jLynx
32f957cead
WIP updating header
2022-03-24 19:08:07 +13:00
jLynx
2030118d9f
WIP can now switch between kPa and PSI
2022-03-24 17:05:38 +13:00
jLynx
0523aabe91
WIP PSI selector
2022-03-24 16:10:55 +13:00
jLynx
1c81c7a8ba
Revert "Added NZ to APRS"
...
This reverts commit 9df1cfa670
2022-03-23 21:32:32 +13:00
jLynx
9df1cfa670
Added NZ to APRS
2022-03-23 20:51:10 +13:00
Arjan Onwezen
d9c1b6b61f
Added consecutive id's in message.hpp, as mentioned in #484 .
2022-03-20 13:38:53 -04:00
Erwin Ried
8774ee0acd
Merge pull request #485 from ArjanOnwezen/centralize-database-functions
...
centralize-db-retrieval-functions
2022-03-18 22:05:09 +01:00
Brumi-2021
d5a1733c1c
Solving_mic_saturation_and_spectrum_armonics_Mic_App
2022-03-05 21:39:53 +01:00
notpike
e00d91e1d2
Added return codes for delete_file() and rename_file() for file.hpp
2022-02-01 10:37:38 -08:00
Erwin Ried
459b8efc52
Merge pull request #487 from Brumi-2021/Add_Gain_TX_control_to_GPS_Simulator_issue#480
...
Add_Gain_TX_to_GPS_sim_App_issue_480
2022-01-31 09:43:20 +01:00
Erwin Ried
db3f645131
Merge pull request #489 from Brumi-2021/“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
...
“antenna dc bias missing in ais and radiosonde”
2022-01-31 09:41:11 +01:00
Brumi-2021
b84820963b
Revert "Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”""
...
This reverts commit 4de25a2039
2022-01-30 11:37:46 +01:00
Arjan Onwezen
ec23dd8edf
some improvements to screen navigation
2022-01-30 05:12:46 -05:00
Brumi-2021
4de25a2039
Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”"
...
This reverts commit 4a57af64ce
2022-01-30 10:58:43 +01:00
Brumi-2021
a11b9c492f
Add_Gain_TX_to_GPS_sim_App_issue_480
...
Add Gain control to the GPS Sim App .
(we are clonning the two previous PR's n #395 and #446 of the Replay App, correcting TX Gain control to this GPS Sim App )
2022-01-29 23:29:17 +01:00
Arjan Onwezen
867539ce9c
centralize-db-retrieval-functions
2022-01-28 10:24:49 -05:00
Žiga Deisinger
cebbc12084
Enable / Disable Touchscreen #481
...
This commit will reverse the logic of touch screen as suggested by @ArjanOnwezen
2022-01-27 14:23:22 +01:00
Žiga Deisinger
4a0d42ed34
Add code for feature "Disable Touch"
2022-01-26 21:52:08 +01:00
Michał Borsuk
0d5af740a5
correction of spelling of units
2022-01-26 18:08:56 +01:00
Žiga Deisinger
96879d3664
Add code for feature "Disable Touch"
2022-01-26 14:53:31 +01:00
Žiga Deisinger
7af7279ea4
Fix ADS-B not updating Altitude in Map #473
...
This commit will fix altitude not automatically updating when in Map mode. Also set default altitude for AIS to 0.
2022-01-23 22:34:01 +01:00
Arjan Onwezen
dcb67049af
Prepadded MMSI in AIS app with zeros, so it's always 9 chars long as in the specs.
2022-01-16 05:06:53 -05:00
Brumi-2021
4a57af64ce
“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
2022-01-15 23:09:42 +01:00
Erwin Ried
30449e0adf
Merge pull request #467 from ArjanOnwezen/gui-glitch-in-adsb-rx
...
Small GUI glitch in ADSB RX
2022-01-12 19:06:14 +01:00
Arjan Onwezen
c9a813fbd6
GUI glitch in ADSB RX
2022-01-12 10:31:59 -05:00
eried
0da7d2d0ac
Version bump
2022-01-12 15:35:35 +01:00
eried
7c8f02d05a
Update credits
2022-01-12 15:35:30 +01:00
Erwin Ried
e5015cc67b
Merge pull request #446 from Brumi-2021/“Indep_persistent_memory_14dBs_RF_tx-rx_amp”
...
Minor improvements to the previous PR #395 Add Gain_TX to Replay App
2022-01-12 15:19:54 +01:00
Erwin Ried
03c9812487
Merge pull request #457 from Brumi-2021/Solving_14dBs_lower_TX_AM_than_FM_TX_in_MIC_App
...
Minor improvements, to the previous excellent PR #329 AM-SSB-DSB Mic Functional from aldude999
2022-01-10 11:05:23 +01:00
Erwin Ried
fc08d0ba2d
Merge pull request #452 from ArjanOnwezen/add-operator-to-icao-24
...
Added operator to ICAO24 file
2022-01-10 11:04:15 +01:00
Erwin Ried
dfa7dfb024
Merge pull request #461 from notpike/touchtunes
...
Touchtunes EW Mode Feature
2022-01-04 10:55:22 +01:00
notpike
c713d996ad
TouchTunes TouchTunes New Feature QA
2022-01-03 20:15:54 -08:00
notpike
c2ff37a1c7
TouchTunes TouchTunes New Feature QA
2022-01-03 19:57:51 -08:00
notpike
8ee650503c
TouchTunes TouchTunes New Feature QA
2022-01-03 19:49:50 -08:00
notpike
47014b35ad
TouchTunes new functions
2022-01-03 19:14:05 -08:00
Arjan Onwezen
0a05c63c47
added qr code for radiosonde
2022-01-02 17:09:45 -05:00
Brumi-2021
f4403121a1
Minor improvementes to the previous PR #329 AM-SSB-DSB Mic Functionality App
2022-01-01 12:26:35 +01:00
Arjan Onwezen
9792e13cbf
fixes and cleanup
2021-12-17 14:27:00 -05:00
Arjan Onwezen
455389f1d1
fixes and cleanup
2021-12-12 05:09:06 -05:00
Arjan Onwezen
4a0a243530
added binary search tree lookup to airlines.db
2021-12-12 04:48:11 -05:00
Arjan Onwezen
3cb9e1849b
added ICAO special designators, to aircraft types
2021-12-12 04:38:05 -05:00
Brumi-2021
d0f9073b67
Minor improvementes to the previous PR #395 Add Gain_TX to Replay App
2021-12-05 16:18:52 +01:00
Erwin Ried
e2a2f7a448
Merge pull request #441 from ArjanOnwezen/make-icao24-db
...
Show aircraft info based on ICAO 24 bit transponder code in ADS-B app
2021-12-03 10:22:58 +01:00
Arjan Onwezen
708111066e
removed duplicate file, README changes
2021-12-01 17:32:13 -05:00
Arjan Onwezen
2a2abac244
added aircraft info to ADS-B app
2021-12-01 17:23:40 -05:00
Arjan Onwezen
96db26e884
added icao24.db database and tool generator
2021-11-28 11:08:34 -05:00
Brumi-2021
9f48199a96
Changing background icon to yellow in the decimated files recording
2021-11-27 23:36:44 +01:00
eried
a07683b2a6
Merge branch 'next'
2021-11-24 14:58:11 +01:00
eried
e3de466743
Version bump
2021-11-24 14:55:06 +01:00
eried
3903aec071
Update credits
2021-11-24 13:47:47 +01:00
Erwin Ried
2a11b59ab7
Merge pull request #424 from intoxsick/custom-splash-screen-from-sd
...
Custom splash screen from sd
2021-11-24 12:35:41 +01:00
Erwin Ried
0d1d703ba9
Merge pull request #426 from heurist1/update_pocsag_decoder
...
Update pocsag decoder
2021-11-24 12:32:33 +01:00
Erwin Ried
84ea106f79
Merge pull request #433 from Brumi-2021/New_feature_Increase_freq_range_to_App_Capture
...
Increase more BW Options to Capture App
2021-11-24 12:31:47 +01:00
Erwin Ried
dc06950a94
Merge pull request #419 from Brumi-2021/Final_correction_GCC_10_Compile_error_#199_with_sharebrained_feedback
...
Final correction gcc 10 compile error #199 with sharebrained feedback
2021-11-24 12:31:29 +01:00
ArjanOnwezen
23ec3ff11b
Update ui_adsb_rx.cpp
2021-11-23 00:16:03 +01:00
Arjan Onwezen
bbd9a865de
new airlines_db
2021-11-22 17:13:46 -05:00
Erwin Ried
e985efd78b
Merge pull request #422 from heurist1/adsb-improve-decode-and-gui
...
Adsb improve decode and gui
2021-11-22 20:53:29 +01:00
Brumi-2021
14484b550a
Increase more BW Options to Capture App
...
PR to increase the BW Options in the Capture App , beyond the current max, 500khz. (from 600Khz till 2,75Mhz) all of them work well into the screen, but only <= 600Khz BW are correctly saved into SD Card with full captured data. (Onwards, >600Khz optiions, at the moment , the created SD card file has decimated data, due - to SD Card writting speed limitations),- but I feel still quite interesting feature to keep them.
2021-11-21 19:35:31 +01:00
heurist1
40654aba55
moved extract frame back into proc_pocsag
2021-11-07 09:00:00 +00:00
heurist1
3bbad90949
Scale new integerised power to a better range
2021-11-06 12:35:37 +00:00
heurist1
a0a1954138
Forgot it was called 128 squared
2021-11-06 10:26:01 +00:00
heurist1
94ec0c9087
Sort scaling in GUI
2021-11-06 10:20:39 +00:00
heurist1
a571e40c59
Changed amp to integer
2021-11-06 10:15:17 +00:00
heurist1
79b24ebe13
Improve output
2021-11-01 22:51:06 +00:00
heurist1
8a4564f6f5
Slow down redraw
...
Combine improvements and slow down refresh.
2021-11-01 20:37:27 +00:00
heurist1
1a21e06bbe
Improved overlap packet detection
...
Improved overlap detection and reduced the threshold
2021-11-01 19:28:56 +00:00
eried
da380261b2
Version bump
2021-11-01 11:49:42 +01:00
eried
790ebdff31
Updating the contributors list
2021-11-01 11:48:14 +01:00
heurist1
0d51e3569f
Improved decode of type 17 at expense of others
...
Reject all non type 17 packets
2021-10-31 13:23:48 +00:00
heurist1
0d7bbac6a1
Added switching message length
...
Improves detections in test file from 77 to 80
2021-10-30 00:53:29 +01:00
heurist1
b499380448
Keep items with loc above those without
...
Removed fixsbt and added a new state of signal without position. Positions stay higher than non positions.
2021-10-29 16:59:52 +01:00
Brumi-2021
ab8f93805d
Small correction,of previous PR , about New_Feature_GCC_10_Compile_errors_#199 (based on sharebrained indications)
2021-10-25 18:11:31 +02:00
Brumi-2021
f4db4e2b53
Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax.
2021-10-23 22:17:18 +02:00
heurist1
318720f364
Removed all traces of the parameters on the POGSAG config message
...
Left in the message for the moment, because there are likely to be parameters needed at some point.
2021-10-22 18:11:50 +01:00
heurist1
6ef24ce71c
Removed unused GUI items
2021-10-22 15:41:48 +01:00
heurist1
62f063aef5
Removed unused items from the UI
...
Removed unused items from the UI
2021-10-21 17:14:08 +01:00
heurist1
110b40ea49
Changed content of table
...
Changed the columns of the table to be more useful
2021-10-17 10:03:28 +01:00
heurist1
2b045ffca6
Mark where to change
2021-10-15 18:40:02 +01:00
heurist1
be01ca6da1
Significantly improved adsb demod
...
Change preamble detection, reduce cpu load
2021-10-15 14:26:33 +01:00
heurist1
0fed64636a
Store old changes to ADSB
...
Diff in previous changes to ADSB
2021-10-11 10:14:16 +01:00
heurist1
ab364ca497
POCSAG before reformat
...
This is the POCSAG code before reformat to put smooth and extract packets in the correct place
2021-10-10 09:15:42 +01:00
heurist1
a49c35088d
Added back
...
Added the ability to use the Up and Left buttons simultaneously to cause the cursor to move to the top left of the screen
2021-10-09 22:46:05 +01:00
Erwin Ried
848dba44d8
Merge pull request #395 from Brumi-2021/New-Feature-Add-Gain_TX-control-to-the-Replay-App
...
Add Gain_TX control to the Replay App
2021-10-06 01:15:32 +02:00
Brumi-2021
b335886f42
Update main.cpp
...
Remove initial short wrong Ant-DC_BIAS pulse. (250 msegs aprox)
2021-09-25 16:37:30 +02:00
Erwin Ried
f12eb55f6b
Merge pull request #412 from ArjanOnwezen/fix-backlight-time-out
...
Fixed #398 : Changed datatype to be able to store > 255 second for backlight timer
2021-09-06 06:29:28 +02:00
Arjan Onwezen
6871126100
changed datatype to be able to store > 255 second for backlight timer
2021-09-03 16:46:41 +02:00
Brumi-2021
03eae70555
Add Gain_TX control to the Replay App
...
Current Replay App , shows in the user menu a UI to select two kind of controls for the RF output level :
1-) LNA GAIN (0..40 ) dB => but it has no TX effect because it is the RX-LNA . GAIN
2-) RF AMP (0 / +14dBm , (that was correct , we have two IC's , RX / TX ) (sw is controlling weill .
Note, although SW Version 1.40 do not leave to control drictly the GAIN TX
, that Replay App , in fact, it was using the inheritated selected GAIN TX from any previous usage of MIC App.
That Pull request alllows now to have the following controls
1-) GAIN TX (0..47 ) dB (now it is OK
2-) RF AMP (0 / +14dBm , (that was correct , we have two IC's , RX / TX ) (sw is controlling weill .
Remakrs : After the change , now we can control the GAIN TX , but not "in the fly" . When we are in the Replay loop , any change of the FREQUENCY or GAIN TX will be ignored , till we play STOP / START the loop again. (but the AMP RF (0 /+14 dBs) it works in the loop withouth any problems (same as before ) .
2021-07-15 18:15:44 +02:00
teixeluis
fe806b7bdc
Fixed the mixing of aircraft coordinates in the details view, by
...
checking if the ICAO address of the frame and the current item
in the details view match. Slight refactor by placing the decimal
to string conversion function into the string_format module.
Added fix in the scope of issue #365
FrequencyStepView field in TransmitterView class
FrequencyStepView field in TransmitterView class
Update ui_transmitter.hpp
Update credits
Fixed left padding of the decimal part of the numbers.
2021-06-24 15:16:19 +01:00
teixeluis
97349b06ef
Fixes to the log and screen rendering of the geo coordinates.
2021-06-23 19:54:34 +01:00
teixeluis
2ceb49e4f2
Added more precise function to calculate NL (based on cmath lib).
...
Created constants for some of the values scattered in the code.
2021-06-19 23:41:06 +01:00
Erwin Ried
8afd83a4e1
Merge pull request #381 from teixeluis/feature-radiosondes-beep-371
...
Radiosonde beep pitch RSSI improvements. Keeping current frequency in battery backed RAM
2021-06-17 21:48:14 +02:00
teixeluis
8aff0bb4d8
Improved tone generator for proper frequency control. Also
...
features a square wave mode.
Added proportional beep duration based on the RSSI as well.
Now reading the current radiosonde frequency from the
battery backed RAM instead starting with the same frequency
all the time.
2021-06-16 23:23:47 +01:00
Arjan Onwezen
c8a8a69832
fix save frequency gui glitch
2021-06-14 21:58:15 +02:00
teixeluis
a80d91fb1e
More improvements to the rssi tone. Added saving of the tuned frequency
...
to the radio model persistent store.
2021-06-13 23:35:33 +01:00
teixeluis
43e123bafe
Used temporarily for experimental purposes, no longer needed.
2021-06-11 00:25:24 +01:00
teixeluis
c2dc7d1cf5
Slight improvement of the tone generator.
2021-06-11 00:13:56 +01:00
teixeluis
edcd780402
Improved the pitch RSSI. Still looking for better approach.
2021-06-10 12:10:24 +01:00
teixeluis
c85e6a4d52
Now getting rssi events.Pitch changes still to be improved.
2021-06-09 09:10:01 +01:00
teixeluis
f8f5963bcf
Merge remote-tracking branch 'portapack-mayhem/next' into feature-radiosondes-beep-371
2021-06-08 23:11:01 +01:00
teixeluis
9040e780bc
Added beep on radiosonde packet decoding, and volume widget to control its level.
2021-06-08 23:07:37 +01:00
Erwin Ried
f1ba8c3dee
Merge pull request #361 from ArjanOnwezen/iso-date-time
...
ISO datetime for Clock, FileManager, Frequency manager, added clock UI options
2021-06-07 23:48:19 +02:00
Arjan Onwezen
226c0c2d80
fix for freq manager save file
2021-06-06 01:31:30 +02:00
Arjan Onwezen
6bc2cbeda9
ISO datetime for Clock, FileManager, Frequency manager
...
Added option to show/hide clock (with/without date)
2021-05-17 23:16:15 +02:00
Arjan Onwezen
c307e9d5ae
proc_aprsrx.cpp compile warning fix
2021-05-12 08:09:04 +02:00
Erwin Ried
a090f1fb0d
Merge pull request #354 from ArjanOnwezen/ui_aprs_rx_cpp_warning_fix
...
ui_aprs_rx.cpp compiler warning fix
2021-05-12 02:20:55 +02:00
Erwin Ried
62b789e432
Merge pull request #353 from ArjanOnwezen/dsp_modulate_cpp_warning_fix
...
dsp_modulelate.cpp compiler warning fix
2021-05-12 02:20:17 +02:00
Erwin Ried
42b33c4526
Merge pull request #355 from ArjanOnwezen/aprs_packet_hpp_warning_fix
...
aprs_packet.hpp compiler warning fix
2021-05-12 02:19:57 +02:00
Arjan Onwezen
a3ef7d069e
ui_adsb_rx.hpp compiler warning fix
2021-05-11 21:47:55 +02:00
Arjan Onwezen
f5c3219035
aprs_packet.hpp compiler warning fix
2021-05-10 21:30:45 +02:00
Arjan Onwezen
a2e4a15229
dsp.modulelate.cpp compiler warning fix
2021-05-10 19:31:48 +02:00
Arjan Onwezen
1a8319b86e
/havoc/firmware/application/apps/ui_aprs_rx.cpp:51:7: warning: unused variable 'entry_age' [-Wunused-variable]
...
/havoc/firmware/application/apps/ui_aprs_rx.cpp:345:12: warning: unused variable 'age' [-Wunused-variable]
2021-05-10 16:28:46 +02:00
Erwin Ried
2ab4ed591d
Update ui_about_simple.cpp
2021-05-03 04:00:39 +02:00
eried
85e4a43cbd
Version bump
2021-04-22 09:34:52 +02:00
Erwin Ried
5f778c1734
Update ui_about_simple.cpp
2021-04-19 10:04:50 +02:00
Erwin Ried
c19bcc17af
Merge pull request #341 from fossum/feature/adding-snap-values-to-calls
...
Added a couple snap values to the calls app.
2021-04-19 10:04:07 +02:00
Eric Fossum
d60299af95
Added a couple snap values to the calls app.
2021-04-17 22:20:28 +00:00
eried
57ed3ebb43
Merge branch 'pr/325' into next
2021-04-14 09:30:53 +02:00
Erwin Ried
e21fbbf234
Merge pull request #329 from aldude999/next
...
AM/SSB/DSB Microphone Functionality
2021-04-14 09:26:09 +02:00
Erwin Ried
136209dc8d
Update ui_about_simple.cpp
2021-04-14 09:25:38 +02:00
Erwin Ried
838451f491
Merge pull request #339 from eried/recognition-of-audio-chip
...
Recognition of audio chip
2021-04-14 09:24:46 +02:00
Erwin Ried
4c50401df2
Update ui_about_simple.cpp
2021-04-12 13:29:01 +02:00
zhang00963
a0eaa70ff4
Realize the automatic recognition of audio chip, including ak4951en/wm8731/wm8731s,Try to fix the max2837 temperature problem
2021-04-11 02:19:31 +08:00
Erwin Ried
41864f06e7
Delete ui_mictx.cpp.1
2021-03-22 10:10:01 +01:00
Erwin Ried
133bfbf07b
Delete ui_mictx.hpp.1
2021-03-22 10:09:41 +01:00
DESKTOP-R56EVJP\Alex
f65852ff05
Rebased code from new eried repo commits. Changed to to reflect strijar implementation. Fixed previous issue with old ssb-am-tx ui_mictx code.
2021-03-21 20:21:50 -05:00
Erwin Ried
603b7fb1ab
Merge pull request #286 from GullCode/ui_looking_glass_warning_fix
...
Fixed redefined define, possibly overflowing variable, missing constructors
2021-03-16 14:46:23 +01:00
Erwin Ried
9d437aee6a
Merge pull request #278 from GullCode/tv_collector_warning_fix
...
removed unused variables
2021-03-15 11:45:50 +01:00
Erwin Ried
fe98a58a4f
Merge pull request #277 from GullCode/adsb_warning_fix
...
Fix adsb warnings
2021-03-15 11:45:32 +01:00
Erwin Ried
ee2ebc8302
Merge pull request #272 from euquiq/RADIOSONDE_METEOMAN_LAT_LON_BUG_FIX
...
Fix bug on radiosonde Meteoman Lat & lon calculation
2021-03-15 11:44:21 +01:00
East2West
f15cf78101
Add APRS Receiving App
2021-03-11 22:27:19 -06:00
Erwin Ried
eca25898f2
Merge pull request #276 from GullCode/chibios_warning_fix
...
Fix warning: cast between incompatible function types
2021-02-16 09:12:22 +01:00
Erwin Ried
aea807e1f4
Merge pull request #280 from GullCode/proc_am_audio_warning_fix
...
Quoted out unused variable
2021-02-16 09:11:20 +01:00
Erwin Ried
8807ab179b
Merge pull request #283 from GullCode/proc_btlerx_warning_fix
...
Quoted CRC calculus as it's unused, voided message
2021-02-16 09:10:42 +01:00
Erwin Ried
7049373d67
Merge pull request #288 from GullCode/ui_navigation_warning_fix
...
Added missing brace
2021-02-16 09:10:08 +01:00
Erwin Ried
3c30c127e2
Update ui_navigation.cpp
2021-02-16 09:09:49 +01:00
ImDroided
62c1e4e028
Added Pocsag bitrate
...
I added 3200 to the bitrates in pocsag per a user request on Facebook.
2021-02-14 12:52:56 -06:00
GullCode
cd8732c24f
Direct casting to int instead of new var
2021-02-05 23:08:54 +01:00
Erwin Ried
4f90c5efee
Updating contributors list
2021-02-03 22:23:12 +01:00
Erwin Ried
e0e57e5af2
Merge pull request #290 from GullCode/ui_tv_warning_fix
...
removed unused var
2021-02-03 22:20:34 +01:00
Erwin Ried
d59b0d44d3
Merge pull request #282 from GullCode/proc_am_tv_warning_fix
...
Quoted unused vars and voided one
2021-02-03 22:09:06 +01:00
Erwin Ried
5ca7398bd9
Merge pull request #279 from GullCode/proc_capture_warning_fix
...
fix unused result
2021-02-03 22:08:43 +01:00
Erwin Ried
dbb46edcb6
Merge pull request #285 from GullCode/proc_nrfrx_warning_fix
...
Removed unused and voided a var
2021-02-03 22:07:58 +01:00
Erwin Ried
68e75cc98e
Merge pull request #293 from GullCode/ui_scanner_warning_fix
...
Fixed uninitialized / missing switch cases, unused
2021-02-03 22:07:13 +01:00
Erwin Ried
f0ca95ee7e
Merge pull request #274 from GullCode/sonde_packet_warning_fix
...
Moved calibytes and calfrchk to cpp file to avoid unused warning
2021-02-03 22:06:27 +01:00
GullCode
1a48fb8c5a
removed a var, added a void, removed a unused initializer
2021-01-28 10:08:57 +01:00
Erwin Ried
1a3a60f6ac
Merge pull request #281 from GullCode/proc_audio_tx_warning_fix
...
Added missing initialisation
2021-01-28 00:23:42 +01:00
Erwin Ried
77a7f48958
Merge pull request #284 from GullCode/proc_pocsag_warning_fix
...
Added missing initialisations
2021-01-28 00:23:10 +01:00
Erwin Ried
523877e0d1
Merge pull request #287 from GullCode/ais_packet_warning_fix
...
Added missing default constructor
2021-01-28 00:22:37 +01:00
Erwin Ried
282416169d
Merge pull request #289 from GullCode/ertkey_warning_fix
...
Added missing default constructor
2021-01-28 00:18:31 +01:00
Erwin Ried
8e8e156477
Merge pull request #291 from GullCode/ui_fileman_warning_fix
...
Added a voided v
2021-01-28 00:16:40 +01:00
Erwin Ried
b1135aab0a
Merge pull request #292 from GullCode/ui_morse_warning_fix
...
added a voided var
2021-01-28 00:16:27 +01:00
Erwin Ried
36f9e0cb7c
Merge pull request #294 from GullCode/ui_settings_warning_fix
...
Added missing initializer
2021-01-28 00:16:07 +01:00
Erwin Ried
9bd74f32d0
Merge pull request #295 from GullCode/ui_sonde_warning_fix
...
Added missing initializer
2021-01-28 00:15:39 +01:00
Erwin Ried
dd0042b5f1
Merge pull request #297 from GullCode/soundboard_app_warning_fix
...
added a voided var
2021-01-28 00:14:55 +01:00
GullCode
fb61ad55c0
added a voided var
2021-01-27 17:20:07 +01:00
GullCode
ca7b5e110c
Added missing initializer
2021-01-27 17:10:37 +01:00
GullCode
a6a41ca5a5
Added missing initialize
2021-01-27 17:08:09 +01:00
GullCode
02d69e54eb
Fixed uninitialized / missing switch cases, unused
2021-01-27 17:03:20 +01:00
GullCode
b75ef345a5
added a voided var
2021-01-27 16:57:42 +01:00
GullCode
8c84719598
Added two voided vars
2021-01-27 16:54:17 +01:00
GullCode
8bfeba0d89
Added a voided v
2021-01-27 16:50:48 +01:00
GullCode
c3c680fc04
removed unused var
2021-01-27 16:46:58 +01:00
GullCode
f0457c106d
Added missing default constructor
2021-01-27 16:43:13 +01:00
GullCode
5d73175a17
Added missing brace
2021-01-27 16:39:50 +01:00
GullCode
45b874694e
Added missing default constructor
2021-01-27 16:36:44 +01:00
GullCode
42113434f0
Fixed redefined define, possibly overflowing variable, missing constructors
2021-01-27 16:30:09 +01:00
GullCode
e9e4d20302
Removed unused and voided a var
2021-01-27 16:11:20 +01:00
GullCode
ec520bf08c
Added missing initialisations
2021-01-27 16:07:03 +01:00
GullCode
486c1d6bcd
Quoted CRC calculus as it's unused, voided message
2021-01-27 16:02:59 +01:00
GullCode
b7eb095dd8
Quoted unused vars and voided one
2021-01-27 15:58:56 +01:00
GullCode
3c14d38286
Added missing initialisation
2021-01-27 15:54:45 +01:00
GullCode
3166a66756
Quoted out unused variable
2021-01-27 15:52:17 +01:00
GullCode
961e115cc6
fix unused result
2021-01-27 15:48:41 +01:00
GullCode
1483160df4
removed unused variables
2021-01-27 15:45:04 +01:00
GullCode
c3fe053eb2
Fix adsb warnings
2021-01-27 15:38:05 +01:00
GullCode
6c2950cfe8
Fix warning: cast between incompatible function types from 'void (*)(void *)' to 'msg_t (*)(void *)'
2021-01-27 15:32:46 +01:00
Erwin Ried
89d46d59ee
Merge pull request #275 from GullCode/channel_stat_collector_warning_fix
...
Fix __SIMD32 warning
2021-01-27 15:22:39 +01:00
GullCode
266e398224
Fix __SIMD32 warning
2021-01-27 15:16:43 +01:00
GullCode
e75677d366
Moved calibytes and calfrchk to cpp file to avoid unused warning
2021-01-27 15:09:02 +01:00
GullCode
1c1d3e9897
missing contructor
2021-01-27 14:57:22 +01:00
euquiq
50bab791dd
Fix bug on radiosonde Meteoman Lat & lon calculation
...
The underlying function used for calculating Latitude and Longitude -also used in other places inside the radiosonde app- was returning a positive value always.
But it needs to cope with negative values also (i.e. Lat and Lon)
Fixed by just changing the returning value into int32_t (even if the calculation is done in uint32_t, the actual sign is passed thru when returning the calculated value -those are the same 4 bytes, interpreted either as (before) unsigned or (now) signed)
2021-01-25 23:41:19 -03:00
eried
000b2d3e7d
Version bump
2021-01-20 10:02:52 +01:00
Erwin Ried
d5e6d9d662
Merge pull request #257 from strijar/waterfall-bar
...
Waterfall filter bar
2021-01-12 21:57:19 +01:00
Erwin Ried
64bdd3e018
Merge pull request #263 from euquiq/JAMMER-TX_COOLDOWN_TIMERS_IN_SECONDS
...
JAMMER NOW INCLUDES TWO TIMERS
2021-01-12 21:57:04 +01:00
euquiq
928bce083a
Cosmetics + Jammer now in green + Jitter
...
I think the Jammer deserves a green icon, since it actually does it job pretty well.
Then there is a Jitter parameter. It allows to introduce a jitter from 1/60th of a second up to 60/60th of a second (a full one). It will delay / move forward either the TX or the cooldown period for a maximum of a half of the time you choose as jitter.
Meaning: If I choose 60/60th, a full second of jitter, it will produce a random number from 1 to 60.
Then it will calculate jitter = 30 - randomnumber
THen it will "add" that (positive or negative) time to the time counter for the next jitter change of state.
2021-01-08 11:54:21 -03:00
euquiq
8859c3d80c
JAMMER NOW INCLUDES TWO TIMERS
...
Each driving the TX and COOLDOWN timers.
2021-01-07 17:51:38 -03:00
Белоусов Олег
1e9406d091
Cleaned up a bit
2020-12-24 11:14:23 +03:00
Белоусов Олег
63f6a885d8
Implemented correct display of the filter indicator on the waterfall
2020-12-23 18:00:51 +03:00
euquiq
6aee1c9c30
just making Persistent Memory easier to read
...
Some internal code re-writing in order to simplify a bit, and hopefully making it easier to understand what's going on inside there.
2020-11-03 02:14:16 -03:00
Erwin Ried
2fa6df596a
New icon and shortcut
2020-11-01 17:26:29 +01:00
Erwin Ried
aeefecf5c6
Version bump
2020-10-31 22:00:19 +01:00
Erwin Ried
06d4916144
Merge pull request #187 from rascafr/rascafr/scanner-app-load-frequency-files
...
Scanner app - Load custom frequency files
2020-10-27 22:03:26 +01:00
Erwin Ried
911f0c8881
Merge pull request #213 from euquiq/Fix-APRS-TX-app
...
Fix aprs tx app
2020-10-27 21:57:50 +01:00
Erwin Ried
01cfd360fe
Merge pull request #215 from euquiq/looking_glass_full_bw_cascade_scanner
...
New "looking Glass" app
2020-10-27 21:57:11 +01:00
euquiq
13ce56f7bf
Added "RESOLUTION" parameter
...
Discord User jteich did some investigation (Thanks!) and helped me understanding this rather obscure parameter:
Internally, is called "TRIGGER", and is passed into the baseband when configuring the desired spectrum sample rate.
Please forgive me in advance if this explanation is not 100% correct. It's only my interpretation, based on my own observation and jteich's comments over Discord chat.
This trigger parameter apparently determines the amount of data over time used for calculating the signal's power inside each specttrum's bin, before considering it "done".
In short, if you lower this resolution value then the cascade will tend to be rendered a bit faster, while kind of blind to tiny signals.
On the other hand, a bigger value will help rendering and distinguishing different signals on the cascade.
Too big a value can easily clutter up the cascade. But then it may be a "blessing" when inspecting higher freuqencies -where hackrf is more deaf"
The default value of 32 is quite decent. But then, now you can experiment with it. Cheers
2020-10-26 23:43:35 -03:00
euquiq
210ec9dd1b
Looking Glass with PRESETS
...
Added a PRESETS.TXT file (inside /LOOKINGGLASS folder).
Also optimized the way the spectrum signal is integrated into the cascade.
Added provision for ranges lower than 240MHz but I am afraid that at this time it will not be advisable to lower ranges any more than 240MHz, since some artifacts and frequency running - moving out of place- occurs.
I can only hope that someone with a better understanding of hackrf's inner code can fix this issue and perhaps enhance the scanning speed.
I found some "original commenting" inside the code:
// TODO: Move more low-level radio control stuff to M4. It'll enable tighter
// synchronization for things like wideband (sweeping) spectrum analysis, and
// protocols that need quick RX/TX turn-around.
Which makes me think that there are things "missing" from the portapack side of the code, for allowing serious speed sweeping. So I am concluding that with current "portapack framework" this might be "the best possible thing".
It is to be noted that the "new" internal sweep mode code is signed by:
* Copyright 2016 Mike Walters, Dominic Spill
*
* This file is part of HackRF.
Maybe Mike or Dominic can be contacted and hopefully lend a hand on enhancing this code.
2020-10-26 12:53:10 -03:00
Erwin Ried
47c5c1e9e5
Update generate_world_map.bin.py
...
Fix for https://github.com/eried/portapack-mayhem/issues/217
2020-10-24 22:38:43 +02:00
dqs105
7ca322fed4
Added options for tuning CLKOUT freq.
...
- Now we have variable CLKOUT.
- CLKOUT can be set between 10kHz and 60MHz.
(The output signal will become mostly sine shape when reaching 50MHz.)
- Click on freq setting field to change tuning step.
2020-10-24 00:24:05 +08:00
euquiq
3e1d726064
Enhancement and bug
...
Added a nicer MARKER (thanks to XSX(H1) contributor for the suggestion)
Fixed a bug that made the screen scroll from top, when using a popup "window" and returning (like, when pressing the DC VOLTAGE enable / disable" button on top bar) THanks to GregoryFenton for the testing and bug spotting!
2020-10-23 12:19:57 -03:00
euquiq
01ba7a57ea
New "looking Glass" app
...
Capable of showing a cascade with full bandwidth scan. You can select Min and Max Mhz for the cascade.
You can move a marker so to (aproximately) know a particular frequency on the cascade. If you press the select button, the app will jump into the RX -> AUDIO app, already tuned into the just "marked" frequency.
This first version SURELY has space for lots of optimizations and improvement in general.
2020-10-21 13:21:34 -03:00
dqs105
699504a703
Removed trailing spaces.
2020-10-14 20:35:51 +08:00
dqs105
48ccc1e988
Merge branch 'clkout_enable' of https://github.com/dqs105/portapack-mayhem into upstream
2020-10-14 20:15:36 +08:00
euquiq
95f7eda9c5
APRS TX app is working fine now!
...
Several old bugs squashed.
On the APRS side, most notably, SSID numbers where shifted left twice, instead of once, and bits 5,6 where not properly set.
On AX.25 side, the bit stuffing part of the encoder was not placing the zero bit on the right place.
Finally, I changed APRS icon from ORANGE to GREEN, since even this may be a simple app, now it's doing its work as intended.
2020-10-10 20:24:11 -03:00
euquiq
b22448de75
Fixes SSID value error on APX TX
...
Values where left bit-shifted upon being entered by the user, so resulting SSID being transmitted was a different number. This shifting was happening both on Source and Destination SSID values.
2020-09-28 17:54:27 -03:00
Erwin Ried
98ba332cda
Version bump
2020-09-25 03:34:51 +02:00
Erwin Ried
f3503e6844
Fix for the freezing when no on_touch_release function
2020-09-25 03:34:05 +02:00
Erwin Ried
883a62238d
Version bump
2020-09-24 22:04:59 +02:00
Erwin Ried
e75dfdaf2d
Merge pull request #196 from strijar/morse_tx
...
Bug fix
2020-09-24 10:33:06 +02:00
Белоусов Олег
cafc4fdec4
Bug fix
2020-09-24 11:04:00 +03:00
Erwin Ried
99af859e13
Default null for on touch release and press
...
Fixes https://github.com/eried/portapack-mayhem/issues/194
2020-09-24 03:15:40 +02:00
Белоусов Олег
25ba2f1391
Morse TX loops
2020-09-22 16:12:46 +03:00
Белоусов Олег
a5a3ba184a
Morse TX speed in WPS
2020-09-22 11:46:44 +03:00
dqs105
e89b7683ef
Fixed "Stop After" freeze & stronger CW signal
2020-09-19 14:24:40 +08:00
dqs105
1029322405
Fix "Stop After" Freeze.
2020-09-19 14:22:28 +08:00
dqs105
66a841e079
combine clkout_config => ui_config
2020-09-17 12:47:34 +08:00
dqs105
b15b781039
Added options for enabling CLKOUT.
...
- CLKOUT can be enabled in Radio settings and status bar.
- Fixed a typo(I believe) in ui_navigation.
2020-09-16 19:27:56 +08:00
Erwin Ried
55783a60f5
Update ui_navigation.cpp
2020-09-15 23:13:31 +02:00
Erwin Ried
e76ec66023
Adding contributors
2020-09-15 23:13:01 +02:00
Erwin Ried
bf068abba3
Microphone app button rename
2020-09-15 23:12:50 +02:00
Erwin Ried
8949662eee
Version bump
2020-09-15 22:10:17 +02:00
Erwin Ried
3d9ce8a037
Merge branch 'pr/166' into Radiosonde-vaisala-add-temp-humidity-merge-conflicts-fix
2020-09-14 23:11:08 +02:00
Erwin Ried
95be75a8af
Merge pull request #172 from dqs105/new_splash
...
New custom splash.
2020-09-14 22:53:59 +02:00
Erwin Ried
7fd9adf3f2
Merge pull request #171 from euquiq/mic-tx-rx-into-main-menu
...
Menu changes
2020-09-14 22:51:49 +02:00
Erwin Ried
3aaa4a0ba1
Merge pull request #161 from dqs105/mic_tx_rfgain
...
Added TX Gain control & code simplification
2020-09-14 22:50:35 +02:00
Erwin Ried
875db13917
Merge pull request #170 from dqs105/siggen_amp
...
Remove hard-coded rf_amp on.
2020-09-14 22:46:53 +02:00
Erwin Ried
1a94f4a1ab
Merge pull request #174 from ITAxReal/ax_fork
...
SoundBoard App Improvements
2020-09-14 22:46:00 +02:00
Erwin Ried
4390647e28
Merge pull request #184 from rascafr/rascafr/freq-manager-hide-tmp-dot-files
...
Hide temporary & OS system files from category files list
2020-09-11 22:18:20 +02:00
Rascafr
f95467d71b
loaded_file_name goes back to default 'scanner' file if load step fails
2020-09-11 22:17:40 +02:00
Rascafr
200c57f990
Save new frequencies into the default / user loaded freqman txt file
2020-09-11 22:15:35 +02:00
Rascafr
d2c66f4515
Removed confirmation modal after load is successful
2020-09-11 22:07:12 +02:00
Rascafr
dbdb0bd379
Added ui_scanner load button for any .txt frequency file
2020-09-11 21:11:42 +02:00
Rascafr
fcdbedca98
Bad emplace_back code position fix
2020-09-11 20:46:41 +02:00
Rascafr
ccb3937e37
Hide .dot tmp / system files from list in frequency manager module
2020-09-11 20:34:15 +02:00
Erwin Ried
c4052064a9
Merge pull request #182 from rascafr/file-manager-hide-tmp-dot-files
...
Hide temporary & OS system in Frequency Manager
2020-09-11 15:02:16 +02:00
Rascafr
dd5e63abd3
Hide empty & .dot tmp / system files in freq manager
2020-09-11 12:25:10 +02:00
dqs105
5cbbf62c5f
Removed drawRAW.
...
- BMP files can be loaded directly now, so it can be removed.
2020-08-29 10:53:26 +08:00
ITAxReal
8a4e6492d9
More Improvements on SoundBoard
...
Optimizing and fixing
2020-08-28 23:59:33 +03:00
ITAxReal
668afccc28
> But it's a sound board not a music player....  Maybe make it say sounds instead of songs? Paging was a great idea however.
...
Okay, okay.
2020-08-28 22:22:39 +03:00
ITAxReal
e466c14c88
Improved SoundBoard app:
...
* No device freeze when you try to close app while it's transmitting
* Bypassed 100 .wav files limit by implementing paging functionality
* Removed useless progressbar and implemented page info line instead
2020-08-28 21:47:56 +03:00
dqs105
80f074b82f
Added BMP file support.
...
- Now can load splash.bmp!
2020-08-28 12:23:52 +08:00
dqs105
7116ca3f91
Fixed typo.
2020-08-28 00:27:52 +08:00
dqs105
8463cba4b6
Splash generator.
...
(Modified from the one generates world_map.bin)
2020-08-28 00:22:36 +08:00
dqs105
78f2e417d6
Fixed RGB565 mode & clean up
2020-08-28 00:21:09 +08:00
dqs105
ac12bf5f50
modify file extension from data to bin.
2020-08-27 23:16:05 +08:00
dqs105
8edaa1e51e
Added new custom splash.
...
- Custom splash now can be loaded from SD card.
2020-08-27 23:07:48 +08:00
euquiq
a2b28c097c
Menu changes
...
Moved the MIC TX RX into the main menu.
Changed scanner color from yellow to green, since it is kind of rounded up into an acceptable functionality.
Also, did a bit of cleanup on the code spacing inside the menues.
2020-08-26 10:48:09 -03:00
dqs105
7fae33eb49
Remove hard-coded rf_amp on.
...
Removed hard-coded turning rf_amp on when enabling transmitting.
It will be handled by TransmitterView.
2020-08-26 15:39:17 +08:00
Erwin Ried
3425ca8d54
Update generate_world_map.bin.py
2020-08-26 01:40:51 +02:00
Erwin Ried
dbf8d2e130
Merge pull request #167 from euquiq/fix-backlight-timer-bug
...
fix-portapack-backlight-timer-bug
2020-08-25 10:11:31 +02:00
euquiq
a445bfa444
fix-portapack-backlight-timer-bug
...
The selected time for backlight off on Options-> Interface was not working ok for most of the selectable time options.
2020-08-24 18:12:46 -03:00
euquiq
13abb620f6
Radiosonde-vaisala-add-temp-humidity
...
Also added the fields "DateTime" which just shows the raw timestamp that portapack assigned the last packet received, in the format: YYYYMMDDHHMMSS ... And "Frame" which shows the packet # (or frame) for correlating with other software / verify that there are new packets being received.
Also moved a string function for returning rounded-up decimals, originally inside the whipcalc tool app, into the string_format functions library, because I used that function on TEMP and HUMIDITY values inisde the radiosonde app.
Finally, the whole UI has its widgets moved a bit, giving space for these new parameters.
2020-08-24 17:31:27 -03:00
dqs105
8833b2fce5
Restored radio.cpp
2020-08-24 11:21:30 +08:00
dqs105
7d6fb56c7e
Minor bug fix
...
- Key press & touch isolation
2020-08-24 11:09:10 +08:00
dqs105
911eb36210
Merged TxButton and Button & minor bug fix
2020-08-24 11:02:42 +08:00
dqs105
d7568b820d
UI tweak & new PTT button
2020-08-24 01:53:34 +08:00
dqs105
0f88efc44e
Tx led fix & UI tweak & Rx frequency
2020-08-23 17:41:31 +08:00
dqs105
4197b5c083
Added RX gain control & UI modification
...
Thanks @euquiq for a more common solution to the bug.
Added RX gain control.
Now we have full gain controls!
Merged PTT and Voice activation into one option selector.(allowing RIGHT BUTTON to work with PTT off)
2020-08-22 14:57:55 +08:00
Erwin Ried
888225fb55
Merge pull request #162 from euquiq/fix-freq-format-function
...
Revert into use of spaces for padding freq
2020-08-21 20:48:43 +02:00
euquiq
b41074fbe3
Revert into use of spaces for padding freq
...
This patch addresses the issue detected in: https://github.com/eried/portapack-mayhem/issues/159
This patch will revert the behavior of the function to_string_short_freq
into using spaces on the left of the integer part of the frequency (as it did originally).
When upgrading the scanner app, I did change the behavior of this function eliminating those spaces, so I could gain some characters-worth of space inside the scanner, but I failed to detect that it introduced some lack of padding on the rx->audio app.
Now, it is back as before, and I also did update the scanner so it can cope with the "extra spaces" this function now adds (again).
2020-08-21 15:05:37 -03:00
dqs105
2f54c11fea
Added TX Gain control & code simplification
...
A bug that enabling audio RX resets the TX gain (perhaps because that changing to receiving mode modifies some registers) inspired me to add this gain control.
Commented out some steps which don't require for the VU meter to work again.
Moved some widgets for gain control.
2020-08-21 23:18:53 +08:00
Erwin Ried
f1a2155e87
Merge pull request #157 from eried/gcc9.3-assert-redefinition
...
Gcc9.3 assert redefinition
2020-08-20 21:45:11 +02:00
Erwin Ried
af8382eeb0
Merge pull request #145 from strijar/audio-cw
...
Audio FIR filter for CW
2020-08-20 20:57:01 +02:00
Erwin Ried
0993f36157
Merge pull request #155 from euquiq/add-crc-check-and-selector-on-radiosondes
...
Radiosonde-CRC-checkbox
2020-08-20 20:56:21 +02:00
euquiq
e76a464f7e
Radiosonde-CRC-checkbox
...
Added CRC calculation for Vaisala radiosondes.
Added a Checkbox on APP for turning ON / OFF CRC. When CRC on, malformed packets are ignored.
Connected existing CRC function for METEOMAN sondes, using the same "CRC" checkbox logic.
2020-08-20 15:22:11 -03:00
Erwin Ried
9186031e95
Update stream_output.cpp
2020-08-19 22:52:39 +02:00
eried
1c9ccbc247
Rename m4txevent::assert and m0apptxevent::assert (adding "_event")
...
Copied from f6cdf6a722
2020-08-19 09:43:04 +02:00
Belousov Oleg
4bc360d652
Waterfall in AM/NFM Audio mode extended to 48kHz
2020-08-19 01:04:14 +03:00
Белоусов Олег
3559e37a76
Audio FIR filter for CW
2020-08-17 16:07:06 +03:00
Erwin Ried
b7ae9d575b
Merge branch 'v1.2' of https://github.com/eried/portapack-mayhem into v1.2
2020-08-15 16:01:33 +02:00
Erwin Ried
303d9c8a9d
Version bump
2020-08-15 16:01:15 +02:00
Erwin Ried
d79f3ce028
Merge pull request #137 from eried/debug-temperature
...
Debug temperature
2020-08-15 15:58:36 +02:00
Erwin Ried
c56d84d037
Merge pull request #136 from eried/new-scanner-ui
...
New scanner ui
2020-08-15 15:56:21 +02:00
Erwin Ried
646b7b564e
Merge pull request #110 from strijar/audio-spectrum
...
Audio spectrum
2020-08-15 15:54:08 +02:00
Erwin Ried
cc2046b607
Merge pull request #119 from euquiq/MIC_TX_RX_with_volume_and_squelch
...
MIC TX Now includes RX with Volume and Squelch
2020-08-15 15:53:48 +02:00
Erwin Ried
1fc9a1c6e8
Merge pull request #120 from eried/WAV-viewer-bug-when-wav-file-format-is-wrong
...
Update ui_view_wav.cpp
2020-08-15 15:53:27 +02:00
Erwin Ried
5a3da3bd6a
Merge branch 'v1.2' into add-heading-to-geomap
2020-08-15 15:52:53 +02:00
Erwin Ried
40785e8094
Merge pull request #135 from euquiq/radiosonde-vaisala-rs41-decoding
...
Radiosonde-app-Vaisala-rs41-decoding
2020-08-15 15:51:10 +02:00
Erwin Ried
f519168602
Merge branch 'new-footer' into v1.2
2020-08-15 15:48:49 +02:00
Erwin Ried
ccef06c088
Margin for footer elements
2020-08-15 15:47:23 +02:00
Erwin Ried
8251cf7dbb
Hide the seconds at the beginning
2020-08-15 15:46:53 +02:00
Erwin Ried
004fddf4de
Skip splash when pressing titlebar, if enabled
2020-08-15 03:20:55 +02:00
euquiq
7b19c0a35f
Update ui_navigation.cpp
...
Now the Sonde App icon is in green: All sondes in the original proposal are working!
2020-08-14 20:11:24 -03:00
Joel Wetzell
27a549dac7
allow printing tag even without a valid heading
2020-08-14 15:46:45 -05:00
euquiq
c7b0fbc359
Radiosonde-app-Vaisala-rs41-decoding
...
Added the Vaisala RS41 data packet decoding.
Changed the default freq from 402.0 to 402.7 Mhz, since it is more popular freq.
Lowered the frequency stepping, so it is easier to fine-tune the exact freq center, if needed.
Sonde's Serial ID is passed into the VIEW MAP, so now the sonde is labelled on the map.
2020-08-14 15:51:12 -03:00
Joel Wetzell
f6437adc60
Reorganixe ADSBDetailsView
2020-08-11 11:26:54 -05:00
Joel Wetzell
13ba70f6c5
Fix negative altitude on DetailsView
2020-08-11 11:26:36 -05:00
Joel Wetzell
bbae5047d1
Fix ADSB heading math and add heading to ADSB log
2020-08-10 22:55:20 -05:00
Erwin Ried
871be0199a
In some scenarios, the new line does not work if is not called thru the write function
2020-08-08 23:08:54 +02:00
Erwin Ried
c7082455c1
Super simple about
2020-08-08 23:06:53 +02:00
Erwin Ried
fcbb26051b
ACARS is not implemented
2020-08-08 15:09:12 +02:00
Erwin Ried
4ce44b84f3
Merge pull request #122 from klockee/new-main-menu-footer
...
New main menu footer
2020-08-08 11:43:45 +02:00
klockee
90d2dbb49c
More cleanup
2020-08-08 04:48:29 -04:00
