Commit Graph

207 Commits

Author SHA1 Message Date
euquiq
8859c3d80c JAMMER NOW INCLUDES TWO TIMERS
Each driving the TX and COOLDOWN timers.
2021-01-07 17:51:38 -03:00
Erwin Ried
06d4916144
Merge pull request #187 from rascafr/rascafr/scanner-app-load-frequency-files
Scanner app - Load custom frequency files
2020-10-27 22:03:26 +01:00
Erwin Ried
911f0c8881
Merge pull request #213 from euquiq/Fix-APRS-TX-app
Fix aprs tx app
2020-10-27 21:57:50 +01:00
Erwin Ried
01cfd360fe
Merge pull request #215 from euquiq/looking_glass_full_bw_cascade_scanner
New "looking Glass" app
2020-10-27 21:57:11 +01:00
euquiq
13ce56f7bf Added "RESOLUTION" parameter
Discord User jteich did some investigation (Thanks!) and helped me understanding this rather obscure parameter:

Internally, is called "TRIGGER", and is passed into the baseband when configuring the desired spectrum sample rate.

Please forgive me in advance if this explanation is not 100% correct. It's only my interpretation, based on my own observation and jteich's comments over Discord chat.

This trigger parameter apparently determines the amount of data over time used for calculating the signal's power inside each specttrum's bin, before considering it "done".

In short, if you lower this resolution value then the cascade will tend to be rendered a bit faster, while kind of blind to tiny signals.

On the other hand, a bigger value will help rendering and distinguishing different signals on the cascade.

Too big a value can easily clutter up the cascade. But then it may be a "blessing" when inspecting higher freuqencies -where hackrf is more deaf"

The default value of 32 is quite decent. But then, now you can experiment with it. Cheers
2020-10-26 23:43:35 -03:00
euquiq
210ec9dd1b Looking Glass with PRESETS
Added a PRESETS.TXT file (inside /LOOKINGGLASS folder).

Also optimized the way the spectrum signal is integrated into the cascade.

Added provision for ranges lower than 240MHz but I am afraid that at this time it will not be advisable to lower ranges any more than 240MHz, since some artifacts and frequency running - moving out of place- occurs.

I can only hope that someone with a better understanding of hackrf's inner code can fix this issue and perhaps enhance the scanning speed.

I found some "original commenting" inside the code:

	// TODO: Move more low-level radio control stuff to M4. It'll enable tighter
	// synchronization for things like wideband (sweeping) spectrum analysis, and
	// protocols that need quick RX/TX turn-around.

Which makes me think that there are things "missing"  from the portapack side of the code, for allowing serious speed sweeping. So I am concluding that with current "portapack framework" this might be "the best possible thing".

It is to be noted that the "new" internal sweep mode code is signed by:

 * Copyright 2016 Mike Walters, Dominic Spill
 *
 * This file is part of HackRF.

Maybe Mike or Dominic can be contacted and hopefully lend a hand on enhancing this code.
2020-10-26 12:53:10 -03:00
dqs105
7ca322fed4 Added options for tuning CLKOUT freq.
- Now we have variable CLKOUT.
- CLKOUT can be set between 10kHz and 60MHz.
(The output signal will become mostly sine shape when reaching 50MHz.)
- Click on freq setting field to change tuning step.
2020-10-24 00:24:05 +08:00
euquiq
3e1d726064 Enhancement and bug
Added a nicer MARKER (thanks to XSX(H1) contributor for the suggestion)

Fixed a bug that made the screen scroll from top, when using a popup "window" and returning (like, when pressing the DC VOLTAGE enable / disable" button on top bar) THanks to GregoryFenton for the testing and bug spotting!
2020-10-23 12:19:57 -03:00
euquiq
01ba7a57ea New "looking Glass" app
Capable of showing a cascade with full bandwidth scan. You can select Min and Max Mhz for the cascade.

You can move a marker so to (aproximately) know  a particular frequency on the cascade. If you press the select button, the app will jump into the RX -> AUDIO app, already tuned into the just "marked" frequency.

This first version SURELY has space for lots of optimizations and improvement in general.
2020-10-21 13:21:34 -03:00
dqs105
48ccc1e988 Merge branch 'clkout_enable' of https://github.com/dqs105/portapack-mayhem into upstream 2020-10-14 20:15:36 +08:00
euquiq
b22448de75 Fixes SSID value error on APX TX
Values where left bit-shifted upon being entered by the user, so resulting SSID being transmitted was a different number.  This shifting was happening both on Source and Destination SSID values.
2020-09-28 17:54:27 -03:00
Белоусов Олег
cafc4fdec4 Bug fix 2020-09-24 11:04:00 +03:00
Белоусов Олег
25ba2f1391 Morse TX loops 2020-09-22 16:12:46 +03:00
Белоусов Олег
a5a3ba184a Morse TX speed in WPS 2020-09-22 11:46:44 +03:00
dqs105
1029322405
Fix "Stop After" Freeze. 2020-09-19 14:22:28 +08:00
dqs105
b15b781039 Added options for enabling CLKOUT.
- CLKOUT can be enabled in Radio settings and status bar.
- Fixed a typo(I believe) in ui_navigation.
2020-09-16 19:27:56 +08:00
Erwin Ried
e76ec66023 Adding contributors 2020-09-15 23:13:01 +02:00
Erwin Ried
3d9ce8a037 Merge branch 'pr/166' into Radiosonde-vaisala-add-temp-humidity-merge-conflicts-fix 2020-09-14 23:11:08 +02:00
Erwin Ried
3aaa4a0ba1
Merge pull request #161 from dqs105/mic_tx_rfgain
Added TX Gain control & code simplification
2020-09-14 22:50:35 +02:00
Erwin Ried
875db13917
Merge pull request #170 from dqs105/siggen_amp
Remove hard-coded rf_amp on.
2020-09-14 22:46:53 +02:00
Erwin Ried
1a94f4a1ab
Merge pull request #174 from ITAxReal/ax_fork
SoundBoard App Improvements
2020-09-14 22:46:00 +02:00
Rascafr
f95467d71b loaded_file_name goes back to default 'scanner' file if load step fails 2020-09-11 22:17:40 +02:00
Rascafr
200c57f990 Save new frequencies into the default / user loaded freqman txt file 2020-09-11 22:15:35 +02:00
Rascafr
d2c66f4515 Removed confirmation modal after load is successful 2020-09-11 22:07:12 +02:00
Rascafr
dbdb0bd379 Added ui_scanner load button for any .txt frequency file 2020-09-11 21:11:42 +02:00
Erwin Ried
c4052064a9
Merge pull request #182 from rascafr/file-manager-hide-tmp-dot-files
Hide temporary & OS system in Frequency Manager
2020-09-11 15:02:16 +02:00
Rascafr
dd5e63abd3 Hide empty & .dot tmp / system files in freq manager 2020-09-11 12:25:10 +02:00
ITAxReal
8a4e6492d9 More Improvements on SoundBoard
Optimizing and fixing
2020-08-28 23:59:33 +03:00
ITAxReal
668afccc28 > But it's a sound board not a music player....  Maybe make it say sounds instead of songs? Paging was a great idea however.
Okay, okay.
2020-08-28 22:22:39 +03:00
ITAxReal
e466c14c88 Improved SoundBoard app:
* No device freeze when you try to close app while it's transmitting
* Bypassed 100 .wav files limit by implementing paging functionality
* Removed useless progressbar and implemented page info line instead
2020-08-28 21:47:56 +03:00
dqs105
7fae33eb49
Remove hard-coded rf_amp on.
Removed hard-coded turning rf_amp on when enabling transmitting.
It will be handled by TransmitterView.
2020-08-26 15:39:17 +08:00
euquiq
13abb620f6 Radiosonde-vaisala-add-temp-humidity
Also added the fields "DateTime" which just shows the raw timestamp that portapack assigned the last packet received, in the format: YYYYMMDDHHMMSS ... And "Frame" which shows the packet # (or frame) for correlating with other software / verify that there are new packets being received.

Also moved a string function for returning rounded-up decimals, originally inside the whipcalc tool app, into the string_format functions library, because I used that function on TEMP and HUMIDITY values inisde the radiosonde app.

Finally, the whole UI has its widgets moved a bit, giving space for these new parameters.
2020-08-24 17:31:27 -03:00
dqs105
7d6fb56c7e Minor bug fix
- Key press & touch isolation
2020-08-24 11:09:10 +08:00
dqs105
911eb36210 Merged TxButton and Button & minor bug fix 2020-08-24 11:02:42 +08:00
dqs105
d7568b820d UI tweak & new PTT button 2020-08-24 01:53:34 +08:00
dqs105
0f88efc44e Tx led fix & UI tweak & Rx frequency 2020-08-23 17:41:31 +08:00
dqs105
4197b5c083
Added RX gain control & UI modification
Thanks @euquiq for a more common solution to the bug.

Added RX gain control.
Now we have full gain controls!

Merged PTT and Voice activation into one option selector.(allowing RIGHT BUTTON to work with PTT off)
2020-08-22 14:57:55 +08:00
Erwin Ried
888225fb55
Merge pull request #162 from euquiq/fix-freq-format-function
Revert into use of spaces for padding freq
2020-08-21 20:48:43 +02:00
euquiq
b41074fbe3 Revert into use of spaces for padding freq
This patch addresses the issue detected in: https://github.com/eried/portapack-mayhem/issues/159

This patch will revert the behavior of the function to_string_short_freq

into using spaces on the left of the integer part of the frequency (as it did originally).

When upgrading the scanner app, I did change the behavior of this function eliminating those spaces, so I could gain some characters-worth of space inside the scanner,  but I failed to detect that it introduced some lack of padding on the rx->audio app.

Now, it is back as before, and I also did update the scanner so it can cope with the "extra spaces" this function now adds (again).
2020-08-21 15:05:37 -03:00
dqs105
2f54c11fea
Added TX Gain control & code simplification
A bug that enabling audio RX resets the TX gain (perhaps because that changing to receiving mode modifies some registers)  inspired me to add this gain control.
Commented out some steps which don't require for the VU meter to work again.
Moved some widgets for gain control.
2020-08-21 23:18:53 +08:00
Erwin Ried
af8382eeb0
Merge pull request #145 from strijar/audio-cw
Audio FIR filter for CW
2020-08-20 20:57:01 +02:00
euquiq
e76a464f7e Radiosonde-CRC-checkbox
Added CRC calculation for Vaisala radiosondes.

Added a Checkbox on APP for turning ON / OFF CRC. When CRC on, malformed packets are ignored.

Connected existing CRC function for METEOMAN sondes, using the same "CRC" checkbox logic.
2020-08-20 15:22:11 -03:00
Белоусов Олег
3559e37a76 Audio FIR filter for CW 2020-08-17 16:07:06 +03:00
Erwin Ried
d79f3ce028
Merge pull request #137 from eried/debug-temperature
Debug temperature
2020-08-15 15:58:36 +02:00
Erwin Ried
c56d84d037
Merge pull request #136 from eried/new-scanner-ui
New scanner ui
2020-08-15 15:56:21 +02:00
Erwin Ried
646b7b564e
Merge pull request #110 from strijar/audio-spectrum
Audio spectrum
2020-08-15 15:54:08 +02:00
Erwin Ried
cc2046b607
Merge pull request #119 from euquiq/MIC_TX_RX_with_volume_and_squelch
MIC TX Now includes RX with Volume and Squelch
2020-08-15 15:53:48 +02:00
Erwin Ried
1fc9a1c6e8
Merge pull request #120 from eried/WAV-viewer-bug-when-wav-file-format-is-wrong
Update ui_view_wav.cpp
2020-08-15 15:53:27 +02:00
Erwin Ried
5a3da3bd6a
Merge branch 'v1.2' into add-heading-to-geomap 2020-08-15 15:52:53 +02:00
Erwin Ried
40785e8094
Merge pull request #135 from euquiq/radiosonde-vaisala-rs41-decoding
Radiosonde-app-Vaisala-rs41-decoding
2020-08-15 15:51:10 +02:00
euquiq
c7b0fbc359 Radiosonde-app-Vaisala-rs41-decoding
Added the Vaisala RS41 data packet decoding.

Changed the default freq from 402.0 to 402.7 Mhz, since it is more popular freq.

Lowered the frequency stepping, so it is easier to fine-tune the exact freq center, if needed.

Sonde's Serial ID is passed into the VIEW MAP, so now the sonde is labelled on the map.
2020-08-14 15:51:12 -03:00
Joel Wetzell
f6437adc60 Reorganixe ADSBDetailsView 2020-08-11 11:26:54 -05:00
Joel Wetzell
13ba70f6c5 Fix negative altitude on DetailsView 2020-08-11 11:26:36 -05:00
Joel Wetzell
bbae5047d1 Fix ADSB heading math and add heading to ADSB log 2020-08-10 22:55:20 -05:00
Erwin Ried
c7082455c1 Super simple about 2020-08-08 23:06:53 +02:00
Erwin Ried
b49ad91d24 Update ui_view_wav.cpp 2020-08-07 22:20:54 +02:00
euquiq
6d131ccfd4 sorry, little detail
That include is not needed
2020-08-07 16:35:06 -03:00
euquiq
d50ea3cc50 fixed a bug, and some fine-tuning
Earlier code did not start with squelch totally open, but a tiny bit closed.  (now at app loading, squelch is truly set up with the same value it shows on screen).

I also hardcoded the NFM sampling rate and baseband bandwidth. It seemed "the right thing to do".
2020-08-07 16:33:17 -03:00
euquiq
72f3eea131 MIC TX Now includes RX with Volume and Squelch
You can enable RX and adjust VOLUME  and SQUELCH into your liking.

Sadly enough, you will NOT be able to use VOICE ACTIVATION when RX is enabled (to ensure there will be NO audio feedback defeating the VA sensing)

A "bug" that won over me, but perhaps and hopefully other coder can easily fix:  The Vumeter will momentarily "dissappear" when enabling RX. But it will reappear as soon as you start TX. Or when you turn off RX.

I enabled the PEAK LEVEL MARK on the Vumeter, so you can easily see in which level your input voice / signal is peaking and regulate the MIC gain accordingly in an easier / more robust way.

Side enhancement: Took off the dark green, yellow and red coloring from the vumeter when no signal is present, and replaced it with dark_grey. I know that some coloring is "eye-candy" but the vu-meter is more readable with this new contrast.
2020-08-07 00:19:37 -03:00
euquiq
bb264dcf57 fixes file renaming on subdir
The file rename function needs to be called with full_path/old_name  and full_path/new_name.

Instead, it was called with full_path/old_name and new_name ... thus the renamed file ended on the root dir (path not preserved).
2020-08-04 14:24:16 -03:00
euquiq
1b2c68b3c0 New squelch behavior and fixes
Squelch value now goes from -90 to +20 and it's directly compared against the max_db parameter returned from each freq scanned by the radio subsystem, with no adjusts or manipulation (you adjust the number as will be used).

Less squelch means weaker signals will trigger it. (as expected).

There was a tiny cosmetic bug when you deleted a frequency from the scanning memory: The description was not erased from screen and you could see it while the scan did not resume.

There was another bug on the pause button: If you asked for another manual scan range when paused, the button kept the text "RESUME"  (its text was not reset to "PAUSE" again).
2020-08-01 00:58:34 -03:00
Белоусов Олег
7ec7a9e07c Cleanup 2020-07-31 13:51:35 +03:00
Белоусов Олег
6f58c7929a Spectrum Width and Speed Settings 2020-07-31 13:47:40 +03:00
euquiq
ee67f74fa7 Added two new buttons and other enhancements
Added buttons for:

Change scanning direction (ascending / descending)

Saving current freq into the SCANNER.TXT file

(Please notice that, on the other hand -for safety issues- the DEL FQ button, deletes the frequency only from the temp memory on the actual scanning session, but does NOT erases the freq. inside the SCANNER.TXT)

Also there are other bug fixes and scanning speed enhancements.
2020-07-28 21:05:10 -03:00
euquiq
03084251c5 Added MIC TX and FREQ DEL buttons
MIC TX button :Shortcut for jumping into TX -> MIC app.

FREQ DEL button: Deletes currently displayed frequency from temporary scanning memory. Ideal to get rid of those not wanted "noisy" freqs in the middle of a range scan.

Also, some code optimizations thrown in.
2020-07-28 01:21:52 -03:00
Joel Wetzell
01101ecef2 position string formatting 2020-07-25 12:26:10 -05:00
euquiq
e8f6e1389e better "squelch" and coloring big numbers
When scanner finds a freq with high dbi, it locks into it "listening" a bit more (less than a second) for either confirm or discard it as an actual high dbi or just a spurious thing.

The big number frequency changes color accordingly: Grey = just scanning, yellow = locking in, Green = Found something, allowing the user to listen.
2020-07-25 14:07:03 -03:00
Joel Wetzell
f32584c553 Add heading and speed to detail view 2020-07-25 10:22:21 -05:00
Joel Wetzell
62df30eae3 add heading information to adsb details view 2020-07-24 18:56:09 -05:00
Joel Wetzell
ea574ef61f Set Sonde heading out of bounds 2020-07-24 16:10:57 -05:00
Joel Wetzell
f08949acd7 Add Heading to ADSB and Map Updating 2020-07-24 16:09:21 -05:00
euquiq
f50b376cbd Update ui_scanner.hpp
Sorry, I missed this before: These two includes are NOT necessary anymore.
2020-07-20 17:43:30 -03:00
euquiq
27f566be8f scanner-enhanced-version
New ui_scanner, inspired on AlainD's (alain00091) PR: https://github.com/eried/portapack-mayhem/pull/80

It includes the following:

1) A big frequency numbers display.

2) A Manual scan section (you can input a frequency range (START / END), choose a STEP value from an available of standard frequency intervals, and press SCAN button.

3) An AM / WFM / NFM scan mode selector, changing "on the fly".

4) A PAUSE / RESUME button, which will make the scanner to stop upon you listening something of interest

5) AUDIO APP button, a quick shortcut into the analog audio visualizing / recording app, with the mode, frequency, amp, LNA, VGA settings already in tune with the scanner.

6) Two enums are added to freqman.hpp, reserved for compatibility with AlainD's proposed freqman's app and / or further enhancement. More on this topic:

ORIGINAL scanner just used one frequency step, when creating scanning frequency ranges, which was unacceptable.  AlainD enhanced freqman in order to pass different steppings along with ranges.  This seems an excellent idea, and I preserved that aspect on my current implementation of thisscanner, while adding those enums into the freqman just to keep the door open for AlainD's freqman in the future.

7) I did eliminate the extra blank spaces added by function to_string_short_freq() which created unnecessary spacing in every app where there is need for a SHORT string, from a frequency number. (SHORT!, no extra spaces!!)

8) I also maintained AlainD idea of capping the number of frequencies which are dynamically created for each range and stored inside a memory based db. While AlainD capped the number into 400 frequencies, I was able to up that value a bit more, into 500.

Cheers!
2020-07-20 16:43:24 -03:00
euquiq
5b449b182f
Addd Newline at the end
tiny detail
2020-07-05 00:39:23 -03:00
euquiq
87cc3c89d5 Fixes File manager freezing on absent or empty SD 2020-07-05 00:33:53 -03:00
euquiq
b0880d6eff Nicer debug -> temperature graph
Lowered the scale -10 ºC so it accomodates less than zero temperatures, present sometimes when cold starting the system.

Added 1 char for temperature label length.

Adjusted the max2837 sensor value -> ºC temp result, by normalizing the conversion to correctly display the standard 25ºC, mentioned in Datasheet.
2020-06-29 18:01:15 -03:00
eried
5677b0faf1 Some titles were too long 2020-06-28 21:42:19 +02:00
eried
9096532eee Merge branch 'new-antenna-length-calculator' 2020-06-28 21:35:36 +02:00
eried
728426c5e7 Just minor changes 2020-06-28 21:35:14 +02:00
eried
d175e33990 Show infinite+ if freq is 0 and small tweaks 2020-06-28 20:05:31 +02:00
eried
dfa524eac0 Slighty larger steps 2020-06-28 17:42:11 +02:00
eried
a81ab66994 Show all antennas even if they are off range 2020-06-28 17:41:32 +02:00
eried
3190eec36a Title was too long 2020-06-28 15:41:55 +02:00
eried
65ab23fd3c Comma as separator 2020-06-28 14:19:09 +02:00
euquiq
8443008dfa New Antenna length Calculator
It reads the antennas definition from a txt file:

WHIPCALC/ANTENNAS.TXT

Inside the textfile you place each antenna you own with the following sintaxis:

<antenna label> <elements length in mm, separated by a space>

For example:

ANT500 185 315 450 586 724 862

Input the required frequency, adjust the wave type (full / half / quarter, etc.) and the calculator will return the antenna length (metric and imperial) while also calculating how much you need to expand the fitting antennas you got defined on the txt.

It may return up to 8 matching antennas, which is more than enough (normally you will have 2, perhaps 3 telescopic antennas around for your portapack)

If by any chance your antennas txt got more than 8 antennas, and more than 8 matches the length of the freq / wave you want, it will only show the first 8 matching antennas and will warn you at the bottom that there are even more results (hidden).

All calculations now are rounded into the best integer, considering first decimal, so precision is double than the original antenna calculator app.
2020-06-27 23:59:11 -03:00
euquiq
77b56810e8 GPS SIMULATOR EXIT ON PLAY FIX
Now, if you exit the GPS SIMULATOR while transmitting, it will properly stop the radio and won't crash, exiting as expected.
2020-06-16 02:18:29 -03:00
euquiq
46c076c296 Antenna length Calculator fix
Calculation now rounds up decimals so result is more accurate.
2020-06-13 21:21:32 -03:00
eried
bf3f9cfe75 Setting for hiding the speaker 2020-06-08 01:23:23 +02:00
eried
89f953c75e Update ui_scanner.cpp 2020-06-07 21:35:55 +02:00
Jonathan Elder
086f3098c4 Scanner features (#55) - Added freq description to scanner display. 2020-06-07 21:35:55 +02:00
eried
c232287023 Icons and colors changes 2020-06-07 21:35:55 +02:00
eried
c406e7b631 Dark cyan for generic submenus 2020-06-07 21:35:55 +02:00
eried
7426c7a7a5 Update ui_scanner.hpp 2020-06-07 21:35:54 +02:00
Jonathan Elder
4d839ea44e Scanner update
Renamed scanner squelch to trigger
Added squelch for audio output
2020-06-07 21:35:54 +02:00
eried
38b6f334b2 Update ui_debug.cpp 2020-06-06 01:07:59 +02:00
eried
92d9b677f7 Update ui_debug.cpp 2020-06-05 23:58:12 +02:00
euquiq
74f76348b3 DEBUG -> PERIPHERALS is now a buttons based menu 2020-06-04 17:28:44 -03:00
Erwin Ried
a1a417d94b Icons for debug app 2020-06-03 21:37:08 +02:00
Gregory Fenton
d7f3539cd9
Testing new debug icons 2020-06-03 18:32:12 +01:00
Gregory Fenton
4dd73d201b
Fix disappearing icons
Icons disappear when they are rolled over using the jog wheel and the colour is set to
ui::color::white()
Fixed by changing the colours of the icons to something other than ui::color::white()
2020-06-03 12:38:05 +01:00