Bernd Herzog
b4da86d491
New app: Spectrum Painter ( #988 )
...
* added spectrum painter app
2023-05-14 23:09:43 +02:00
Brumi-2021
dfadd38e32
Adding 2 WFM filters more to current Audio App ( bw 180Khz and 40 khz to support rx for weather NOAA APT) ( #961 )
...
* First part new filter 40k for NOAA in Audio App
* Adding a third WFM filter 180Khz general pursose
2023-05-07 16:08:45 +02:00
lujji
0631f5d5ab
implement ook scan
2022-12-05 16:51:23 +02:00
Brumi-2021
1e4c93b979
Final opt. AM-9K, applied to Audio_RX and Mic App.
2022-11-19 18:17:54 +01:00
Brumi-2021
745574d3c4
Ak4951-ALC_base adding WM8731-boost OFF options
2022-09-28 22:42:33 +02:00
heurist1
318720f364
Removed all traces of the parameters on the POGSAG config message
...
Left in the message for the moment, because there are likely to be parameters needed at some point.
2021-10-22 18:11:50 +01:00
eried
57ed3ebb43
Merge branch 'pr/325' into next
2021-04-14 09:30:53 +02:00
DESKTOP-R56EVJP\Alex
f65852ff05
Rebased code from new eried repo commits. Changed to to reflect strijar implementation. Fixed previous issue with old ssb-am-tx ui_mictx code.
2021-03-21 20:21:50 -05:00
East2West
f15cf78101
Add APRS Receiving App
2021-03-11 22:27:19 -06:00
Erwin Ried
4aaac8545b
Pocsag improvements ( #20 )
...
* Update analog_audio_app.cpp (#353 )
* Adding phase field (extracted from @jamesshao8 repo)
2020-05-09 13:13:21 +02:00
Erwin Ried
40531e9230
Ble receiver ( #337 )
...
* BLE app
* Update ui_navigation.cpp
Co-authored-by: Furrtek <furrtek@gmail.com>
2020-04-20 06:50:03 +02:00
Erwin Ried
d95bda65ce
Nrf24l01 demodulation ( #338 )
...
* NRF demodulation
* Update ui_navigation.cpp
2020-04-20 06:45:28 +02:00
furrtek
b11c3c94b6
Added tone key mix ratio in Settings -> Audio
...
Renamed Setup to Settings
Updated binary
2018-05-16 09:45:13 +01:00
furrtek
b29c1d9749
Finally found what was eating all the RAM :D
...
Re-enabled the tone key selector in Soundboard
Soundboard now uses OutputStream, like Replay
Constexpr'd a bunch of consts which were going to BSS section
Exiting an app now goes back to main menu
Cleaned up Message array
2018-05-15 23:35:30 +01:00
furrtek
7fd987a2b4
Added support for multiple sample rates in IQ record
...
Support for any sample rate <= 500k in IQ replay
Fixed bias-t power not activating in TX
Removed RSSI pitch output option (awful code)
Udated binary
2018-02-22 07:04:19 +00:00
furrtek
57c759627d
Fixed mic tx not working the first time it was entered
...
Fixed SD card FAT wipe (buffer size too big)
Cleared some warnings from ADSB rx
Updated binary
2018-02-01 11:17:51 +00:00
furrtek
d77337dd77
Added CTCSS decoder in NFM RX
...
RSSI output is now pitch instead of PWM
Disabled RSSI output in WBFM mode
2017-11-28 08:52:04 +01:00
furrtek
1b93dd53e8
Tone generator class
2017-11-10 00:25:04 +00:00
furrtek
950bc2b1d2
AFSK RX works (only Bell202 for now)
...
AFSK RX always logs to file
Removed frequency and bw settings from modem setup view
Updated binary
Bugfix: Binary display shifted one bit
Bugfix: Frequency manager views freezing if SD card not present
Bugfix: Menuview blinking arrow not showing up at the right position
Bugfix: Freeze if console written to while it's hidden
Broken: LCR TX, needs UI update
2017-09-02 08:28:29 +01:00
furrtek
42439d1885
Started writing (copying...) AFSK RX
...
Encoders: removed bit duration setting (frame duration is more useful)
2017-08-29 09:42:04 +01:00
furrtek
58f113d153
"CW generator" and "Whistle" merged in "Signal generator"
...
Added wave shape selection and tone frequency auto-update
Converted color icons to B&W
2017-07-18 19:31:05 +01:00
furrtek
e2f0a03460
Using new CPLD data (fixes spectrum mirroring)
...
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
furrtek
90feadd9f5
POCSAG RX saves ignored address
...
Made AFSK code more generic (not tied to LCR)
Added modem presets and more options in AFSK setup
String-ized and simplified LCR UI code
Simplified AFSK baseband code, made to always work on 16bit words
2017-04-21 06:22:31 +01:00
furrtek
40b49e2072
POCSAG address filter now ignores alpha messages
...
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
d59ee08f41
Whistle now works
...
Moved BW widget in txview
String-ized LCR and AFSK message generator
2017-04-18 12:55:49 +01:00
furrtek
fbc054ca75
Coaster pager address scan
...
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
furrtek
37cfcd392d
Added DCS parity table and generator tool
2017-03-14 07:24:04 +00:00
furrtek
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
4e8980e5d8
Finished jammer modes
...
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
furrtek
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
furrtek
8662ed4024
Close Call should be more accurate
...
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
furrtek
688a012443
Transmitter config widget
...
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
0642d633c3
Frequency manager empty file bugfix
2017-01-30 01:09:00 +00:00
furrtek
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e
Udpdated jammer baseband code, should work again
2017-01-17 08:42:35 +00:00
furrtek
e4abcea9a3
Added bitrate option for POCSAG baseband, PWMRSSI frequency option
...
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc
Merge 'upstream/master' - At least it builds...
2017-01-16 03:45:44 +00:00
furrtek
6bcb7dc1b1
# This is a combination of 2 commits.
...
# The first commit's message is:
Updated RDS transmitter: flags, PI and date/time
Merging baseband audio tone generators
Merging DTMF baseband with "tones" baseband
Added stealth transmit mode
App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there
BHT city DB, keywords removed
BHT cities DB, keywords removed
Update README.md
RDS radiotext and time group generators
# This is the 2nd commit message:
Update README.md
2016-12-24 11:52:11 +01:00
furrtek
d18b6d135d
Restoring jammer and RDS functionalities, please wait...
...
Started work on frequency manager and numbers station simulator
2016-12-23 18:31:01 +01:00
furrtek
ef0feae62b
Started work on ADS-B TX baseband processor
2016-12-23 18:31:01 +01:00
furrtek
8276e5e311
Added CTCSS in Soundboard
2016-09-23 23:08:54 +02:00
furrtek
bb29efeda6
Added Nuoptix DTMF sync transmit (Disney parades, light shows...)
...
Soundboard ignores stereo files
2016-09-23 17:34:50 +02:00
furrtek
808f99647e
Soundboard: Arbitrary samplerate support for wave files
...
Screenshots
2016-08-26 09:54:17 +02:00
furrtek
02f0271553
Added basic POCSAG receiver
...
Added Yes/no modal screen (for future tx warnings)
2016-08-23 08:45:33 +02:00
furrtek
c2fbc0c8d5
AudioTX, fixed about screen and an LCR address list bug
2016-08-17 04:17:24 +02:00
furrtek
45a754645e
Merge remote-tracking branch 'upstream/master'
...
# Conflicts:
# firmware/application/bitmap.hpp
# firmware/application/receiver_model.cpp
# firmware/application/receiver_model.hpp
# firmware/application/touch.hpp
# firmware/application/ui_setup.cpp
# firmware/baseband/proc_ais.hpp
# firmware/baseband/proc_ert.hpp
# firmware/bootstrap/CMakeLists.txt
# firmware/common/portapack_persistent_memory.cpp
# firmware/common/portapack_persistent_memory.hpp
2016-08-17 02:55:34 +02:00
furrtek
38e506a108
OOK transmit is mostly working, bit durations are wrong
...
Simplified messages carrying data (uses shared_memory instead)
Added SymField widget (bitfield, symbol field...)
Added some space for baseband code
BMP palette loading bugfix
2016-08-06 08:49:45 +02:00
furrtek
787f656500
Testing OOK TX baseband module
2016-08-03 08:53:50 +02:00
furrtek
1d697d2201
Added PWM RSSI output for NBFM and WFM
2016-07-28 05:25:33 +02:00
