2414 Commits

Author SHA1 Message Date
Brumi-2021
08a108d3e4 First test, ghost-singal c/m to only Mic_App 2022-08-26 18:34:30 +02:00
Brumi-2021
5021a03572 Minor change radio,disable-->receiver.disable 2022-08-23 00:04:48 +02:00
Brumi-2021
961a4c4588 Addition_bias_DC_ERP_TPMS 2022-08-21 19:59:15 +02:00
Arne Luehrs
a89d418202 AIS Decoding, destination text display fix
Remove trailing null characters '@' from display of destination field
2022-08-15 14:41:07 +08:00
Arne Luehrs
1e14ca4df1 Enable AIS-B decoding and display
Implement decoding for AIS messages 18 and 24A 24B
clean up display of text messages by removing the trailing null
character '@'
2022-08-15 13:56:40 +08:00
Arne Luehrs
5096f91986 Add AIS Class B Decoding 2022-08-15 00:12:24 +08:00
andrej
87418703e0 Make clk and frame duration steps in OOK configurable 2022-08-01 08:40:26 +02:00
andrej
e33c98cbc7 Increase maximum OOK clock to 1000 kHz 2022-08-01 08:40:16 +02:00
Timo Taskinen
50bd08d9ff
Fix AM bandwidth and sampling rate in scanner (#671)
In scanner app, the bandwidth and sampling rate for AM modulation was incorrect. This resulted in high pitched and distorted sound. I have now copied the settings from the Audio receiver app, and now the sound in Scanner sounds good also in AM mode.
2022-06-07 11:05:17 +12:00
jLynx
39134b62c3
Fix for new H2+ devices (#666)
* WIP Fix for new h2+ devices

* reset

* Updated sub module
2022-06-05 14:15:44 +12:00
Jared Boone
e5a30b4309
Persistent memory check value verification, defaulting when fails. (#662)
* Make default constructor for touch calibration

* Add persistent memory check value and access abstraction.

* Add persistent data_t default constructor with reasonable defaults.

* serial_format_t default constructor.

* Tidy up backlight timeout type.

* Add persistent data struct version/checking.

* Make range_t functions constexpr.

* Move ui_config and functions into class.

* Add backlight_config_t struct, separate enable and time settings.
2022-05-29 08:55:18 +12:00
Brumi-2021
379ad6dbf0 Recovered_ALC_Mic_Feature_AK4953_OK_WM8731 2022-05-28 22:29:10 +02:00
ArjanOnwezen
a3ee160e27
Merge pull request #643 from ArjanOnwezen/save-more-app-settings
Save most common settings for TX apps
2022-05-13 21:42:51 +02:00
Arjan Onwezen
ade0d6c68f French translations. 2022-05-13 09:31:58 -04:00
Arjan Onwezen
e97ffd42ef Set fixed modulation (WFM) for Pocsag app. 2022-05-13 09:04:53 -04:00
Arjan Onwezen
cccc92cc34 Save most common settings for TX apps. And translated some French apps along the way. 2022-05-13 08:38:04 -04:00
MattLodge
6c5f8a38e0
Update generate_world_map.bin.py (#640)
Use bytes instead of strings to write ADSB map binary for python3
2022-05-09 07:27:15 +12:00
Brumi-2021
de1570d8af
Allow change initial gain amp values just opened file (#634)
* Update spectrum_collector.cpp

lower case correction

* Update spectrum_collector.cpp

Description changed , better explanation.

* Revert "Update spectrum_collector.cpp"

This reverts commit 4a6fc35384dd3007a4cc91c319b68d2b17232a8c.

* Revert "Update spectrum_collector.cpp"

This reverts commit 35cece1cb0b611aec2dcee474168798883da2819.

* Revert "Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax."

This reverts commit f4db4e2b535cd722ce0f5ee6cd8094d4ba717c4f.

* Allow initial GAIN ,AMP changes after opened  file
2022-05-07 11:43:55 +12:00
Brumi-2021
1027e80d53
Recovered lost ctcss/roger beep/correct mic gain in mic app from 1.5.1 without ALC (Auto mic Limit Control-AK) (#633)
* Update spectrum_collector.cpp

lower case correction

* Update spectrum_collector.cpp

Description changed , better explanation.

* Revert "Update spectrum_collector.cpp"

This reverts commit 4a6fc35384dd3007a4cc91c319b68d2b17232a8c.

* Revert "Update spectrum_collector.cpp"

This reverts commit 35cece1cb0b611aec2dcee474168798883da2819.

* Revert "Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax."

This reverts commit f4db4e2b535cd722ce0f5ee6cd8094d4ba717c4f.

* Recovered CTCSS-Roger_beep-MIC-GAIN from 1.5.1

* Temporary removing ALC-( for AK4951 platorm)
2022-05-07 11:43:14 +12:00
TqMatvey
367cb318cd Fix KeyFob (beta) being off-screen 2022-05-05 18:06:15 +07:00
jLynx
fe33c12111
Sound/white noise Clock fix (#625) 2022-05-05 08:31:54 +12:00
GullCode
5551c6a676 Fixing branch, moving block, adding quote 2022-05-04 10:29:12 +02:00
GullCode
2b7b0d028a Merge branch 'touch_return_option' of github.com:GullCode/portapack-mayhem into touch_return_option 2022-05-03 14:42:40 +02:00
GullCode
7b42d9ec94 changed label to fit the screen 2022-05-03 14:34:55 +02:00
GullCode
0580a528e4
Merge branch 'next' into touch_return_option 2022-05-03 14:31:03 +02:00
GullCode
c75c4685cd Added a ui_config flag to manage gui return icon status 2022-05-03 14:23:58 +02:00
Arjan Onwezen
799a473b36 Save individual app settings. Currently only for apps in Receive section and basic settings like, LNA, VGA, Rx Amp and Frequency. 2022-05-01 06:09:02 -04:00
Jimi Sanchez
2efab19bf6 Merge branch 'next' of https://github.com/jimilinuxguy/portapack-mayhem into next 2022-04-28 17:06:50 -04:00
Jimi Sanchez
4562228b55 Fixing spelling of Wav Viewer 2022-04-28 17:06:45 -04:00
Jimi Sanchez
6af0d4e751
Merge branch 'next' into jimi-merging-conflicts 2022-04-28 17:03:24 -04:00
Jimi Sanchez
0fed174a80 Adding back wipe sd 2022-04-28 16:58:44 -04:00
Jimi Sanchez
d71c759480
Merge branch 'next' into jimi-merging-conflicts 2022-04-28 13:55:44 -04:00
Jimi Sanchez
c1e568f62c Removing wipe sd 2022-04-28 13:54:17 -04:00
Jimi Sanchez
f48980e381 Adding playlist to CMakeLists 2022-04-28 13:52:47 -04:00
Žiga Deisinger
ee9b4c89bd Fix #494 - Change App Titles
I choose what I think are the best Titles based on existing titles/class names and so on. There were also inconsistencies between TX and Transmit and RX and receive. I renamed them to shorter version TX and RX also added it as suffix where possible to make it clearer in what mode you are in. If you have any other title suggestions or changes please use Add comment on Files Changed Screen so I can change it.
2022-04-26 23:09:24 +02:00
Erwin Ried
a91bbe6a2e
Merge pull request #596 from GullCode/proc-adsbrx-warning-fix
Fix for warning: comparison of integer expressions of different signedness
2022-04-22 10:00:05 +02:00
Erwin Ried
a5a9bc85f8
Merge pull request #597 from GullCode/proc-aprsrx-warning-fix
Fix for proc_aprsrx and aprs_packet warnings, they are related
2022-04-22 09:59:31 +02:00
Erwin Ried
b23addd452
Merge pull request #598 from GullCode/tpms-warning-fix
Fix for warning: narrowing conversion
2022-04-22 09:59:21 +02:00
Erwin Ried
6467e5e7e6
Merge pull request #599 from GullCode/proc_mictx-warning-fix
Fix for warning: 'MicTXProcessor::modulator' should be initialized
2022-04-22 09:59:08 +02:00
Erwin Ried
35ed394b37
Merge pull request #601 from GullCode/ais_app-warning-fix
Added missing contructors/operators/etc in ais_app
2022-04-22 09:59:01 +02:00
Erwin Ried
4c98cf16a1
Merge pull request #600 from GullCode/ui_qrcode-warning-fix
Fix for weffc++
2022-04-22 08:19:43 +02:00
Erwin Ried
18be6750e5
Merge pull request #602 from GullCode/ui_adsb_rx-warning-fix
Added missing initializer
2022-04-22 08:19:03 +02:00
GullCode
3fa190324b Fix warning for proc_pocsag 2022-04-21 23:25:58 +02:00
GullCode
de042df7eb Added missing initializer 2022-04-21 23:12:37 +02:00
GullCode
2fbf96425a Added missing contructors/operators/etc in ais_app 2022-04-21 22:52:17 +02:00
GullCode
85d5a8fdba Fix for weffc++ 2022-04-21 22:27:20 +02:00
GullCode
f13d1f8b9c Fix for warning: 'MicTXProcessor::modulator' should be initialized 2022-04-21 21:46:55 +02:00
GullCode
f804d7997c Fix for warning: narrowing conversion 2022-04-21 21:41:02 +02:00
GullCode
2108ea53fa Fix for proc_aprsrx and aprs_packet warnings, they are related 2022-04-21 17:38:49 +02:00
GullCode
90d38af705 Fix for warning: comparison of integer expressions of different signedness 2022-04-21 17:29:42 +02:00
GullCode
c37df0c6fd Fix for warning XXX should be initialized in the member initialization list 2022-04-19 17:23:30 +02:00
Erwin Ried
cdba4fa5bf
Merge pull request #590 from GullCode/a-packet-warning-fix
Fixed warning: comparison of integer expressions of different signedness
2022-04-18 23:29:41 +02:00
Erwin Ried
1537b1eccb
Merge pull request #589 from GullCode/qrcode-warning-fix
Qrcode warning fix
2022-04-18 23:29:08 +02:00
GullCode
048b254354 Fixed uninitialized class members 2022-04-18 22:45:16 +02:00
GullCode
4b87a8a7dd Fixed warning: comparison of integer expressions of different signedness 2022-04-18 22:38:29 +02:00
GullCode
5cdaac6b82 Fix uneeded negative test because type is uint ( warning: comparison is always false due to limited range of data type) 2022-04-18 22:33:10 +02:00
GullCode
17aa58bbf8 Changed pramga to comments to fix warning: ignoring #pragma mark [-Wunknown-pragmas] 2022-04-18 22:32:43 +02:00
notpike
0e9c7448c0 Added GRC C16 to complex script 2022-04-17 11:05:20 -07:00
jLynx
178528ef96
Fixed no audio issue v2 (#567)
* Fixed no audio issue v2 (#567)
2022-04-12 09:28:36 +12:00
jLynx
5d9a2e560b
SD card backup storage (#565)
* Got SD card mounting during boot

* Cleaned up comments

* Now loads settings from SD as backup

* Now loads settings from SD as backup

* linting

* refactoring
2022-04-11 21:42:56 +12:00
Arjan Onwezen
8c1593fab9 Added cancel button in UI settings. 2022-04-08 17:50:21 -04:00
ArjanOnwezen
a9d2b2ff8a
Merge branch 'next' into feature/disableTouch 2022-04-08 16:10:55 +02:00
Arjan Onwezen
efdefa85be Quick fix (as figures out by @bluegizmo83) to make sure WM8731S chips don't stay silent after pause in scanner app. 2022-04-08 09:51:41 -04:00
Arjan Onwezen
6697d2533c Added support for LARGE qr code. 2022-04-08 08:38:32 -04:00
jLynx
9d5ed65f6b Added the most random fix 2022-04-08 12:42:12 +12:00
jLynx
2ba74d0413 What did I change? 2022-04-08 12:31:06 +12:00
jLynx
59d08a4203 Enabled auto detection again 2022-04-07 21:30:37 +12:00
jLynx
51bc0f0100 Fixed broken radio offset 2022-04-07 21:22:47 +12:00
jLynx
2d3cb426ba Stores in memory 2022-04-07 09:11:10 +12:00
jLynx
dd2fdecb21 removed commented lines 2022-04-07 08:48:00 +12:00
jLynx
a37ba1ee2b 2021/12 QFP100 fix 2022-04-07 08:41:46 +12:00
jLynx
0c0d47b0d2 Added persistent memory of save state 2022-04-06 13:28:10 +12:00
jLynx
50821bab55 Added button on boot detection 2022-04-06 08:16:57 +12:00
jLynx
796d9ca854 Updated comments 2022-04-05 14:44:32 +12:00
jLynx
fd8bc177ad Added support for H2+ 2022-04-05 14:41:12 +12:00
jLynx
f6c496d1d3 removed comments 2022-04-05 10:56:09 +12:00
jLynx
b4a6b958e5 Fixed R1_20150901 vs R2_20170522 boot & detection issues 2022-04-05 10:53:52 +12:00
jLynx
43e9ce4704 Fixed R1_20150901 vs R2_20170522 boot & detection issues 2022-04-05 10:52:42 +12:00
Jimi Sanchez
584c46af64 Initial commit of playlist app for replaying capture files sequentially 2022-04-03 19:38:06 -04:00
jLynx
9200db24be WIP 2022-04-02 22:02:05 +13:00
jLynx
03057546e1 WIP 2022-04-02 22:00:46 +13:00
ArjanOnwezen
eec4cd8778
Delete icao24.db
delete duplicated  icao24.db, since it should only be placed in /sdcard/ASDB folder
2022-04-01 14:02:03 +02:00
ArjanOnwezen
d7a795b8f2
Delete mids.db
delete duplicate mids.db, since it should only be placed in /sdcard/AIS folder
2022-04-01 14:00:57 +02:00
jLynx
3601545712
Updated to say 433 as it's not 434 2022-04-01 22:22:25 +13:00
eried
759c4d9d51 Contributors update 2022-03-29 08:28:31 +02:00
eried
77a0d255dd Version bump 2022-03-29 08:15:44 +02:00
NotPike
7066f931a8
Update ui_record_view.cpp
cleanup
2022-03-29 01:16:16 -04:00
NotPike
aa2c5a4c84
Update analog_audio_app.hpp
Forgot to take that include out. >_<
2022-03-29 00:34:52 -04:00
notpike
d70e1a6fac Added Datetime + Freq Filename to Audio App 2022-03-28 20:53:09 -07:00
Erwin Ried
477e6d65df
Merge pull request #488 from ArjanOnwezen/improve-screen-navigation
Improvements to screen navigation
2022-03-28 10:10:46 +02:00
Erwin Ried
a55e5d4fc0
Merge pull request #497 from Brumi-2021/Solving_mic_saturation_and_spectrum_armonics_Mic_App
Solving_mic_saturation_and_spectrum_harmonics_Mic_App
2022-03-28 10:10:08 +02:00
Erwin Ried
8da0dbe36b
Merge pull request #519 from notpike/replay_antenna_bias
Replay App Enable Bias-tee
2022-03-28 10:09:51 +02:00
Erwin Ried
8688ac0e05
Merge pull request #520 from ArjanOnwezen/add-country-info-to-ais-app
Added country to AIS app, so you know from which country a vessel is.
2022-03-28 10:08:39 +02:00
Erwin Ried
82732a3f73
Merge pull request #512 from jLynx/PSI
TPMS toggle between PSI and kPa (v1)
2022-03-28 10:07:41 +02:00
Arjan Onwezen
be0427889f Added country to AIS app, so you know from which country a vessel is.
It's using the MID database, which is also part of the PR.
mids.db should be placed in /AIS folder on SD card.
2022-03-27 12:34:26 -04:00
NotPike
37a40cbeda
Delete ui_newapp.hpp 2022-03-27 00:40:45 -04:00
notpike
4ef98e2928 Added Bias Tee support for Replay and fixed file error logic bug 2022-03-26 21:20:55 -07:00
notpike
434c559861 Added Bias Tee support for Replay and fixed file error logic bug 2022-03-26 21:20:49 -07:00
Erwin Ried
3cb3c95349
Merge pull request #516 from ArjanOnwezen/updated-airlines.db
updated airlines.db
2022-03-25 15:44:32 +01:00
Erwin Ried
979b5126a6
Merge pull request #517 from ArjanOnwezen/updated-icao24.db
updated icao24.db
2022-03-25 15:43:56 +01:00
Arjan Onwezen
8e3fa0b9ea updated icao24.db 2022-03-25 10:18:22 -04:00
Arjan Onwezen
00b43299ad updated airlines.db 2022-03-25 08:47:47 -04:00
jLynx
5c97c24b48 Added NZ to APRS 2022-03-24 20:36:39 +13:00
jLynx
4a8458d812 refactoring 2022-03-24 19:51:08 +13:00
jLynx
165efd7355 refactoring 2022-03-24 19:44:26 +13:00
jLynx
d1d1198b1b refactoring 2022-03-24 19:43:26 +13:00
jLynx
0025ad2507 refactoring 2022-03-24 19:19:02 +13:00
jLynx
32f957cead WIP updating header 2022-03-24 19:08:07 +13:00
jLynx
2030118d9f WIP can now switch between kPa and PSI 2022-03-24 17:05:38 +13:00
jLynx
0523aabe91 WIP PSI selector 2022-03-24 16:10:55 +13:00
jLynx
1c81c7a8ba Revert "Added NZ to APRS"
This reverts commit 9df1cfa670e103bc83536b96e1ceab5bdbc90fe5.
2022-03-23 21:32:32 +13:00
jLynx
9df1cfa670 Added NZ to APRS 2022-03-23 20:51:10 +13:00
Arjan Onwezen
d9c1b6b61f Added consecutive id's in message.hpp, as mentioned in #484. 2022-03-20 13:38:53 -04:00
Erwin Ried
8774ee0acd
Merge pull request #485 from ArjanOnwezen/centralize-database-functions
centralize-db-retrieval-functions
2022-03-18 22:05:09 +01:00
Brumi-2021
d5a1733c1c Solving_mic_saturation_and_spectrum_armonics_Mic_App 2022-03-05 21:39:53 +01:00
notpike
e00d91e1d2 Added return codes for delete_file() and rename_file() for file.hpp 2022-02-01 10:37:38 -08:00
Erwin Ried
459b8efc52
Merge pull request #487 from Brumi-2021/Add_Gain_TX_control_to_GPS_Simulator_issue#480
Add_Gain_TX_to_GPS_sim_App_issue_480
2022-01-31 09:43:20 +01:00
Erwin Ried
db3f645131
Merge pull request #489 from Brumi-2021/“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
“antenna dc bias missing in ais and radiosonde”
2022-01-31 09:41:11 +01:00
Brumi-2021
b84820963b Revert "Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”""
This reverts commit 4de25a20391906e94cf8d24763b77c846da682f5.
2022-01-30 11:37:46 +01:00
Arjan Onwezen
ec23dd8edf some improvements to screen navigation 2022-01-30 05:12:46 -05:00
Brumi-2021
4de25a2039 Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”"
This reverts commit 4a57af64ce2a11d539b317637325ed78fdb75aa7.
2022-01-30 10:58:43 +01:00
Brumi-2021
a11b9c492f Add_Gain_TX_to_GPS_sim_App_issue_480
Add Gain control to the GPS Sim App .
(we are clonning the two previous PR's n #395 and #446 of the Replay App, correcting TX Gain control to this GPS Sim App )
2022-01-29 23:29:17 +01:00
Arjan Onwezen
867539ce9c centralize-db-retrieval-functions 2022-01-28 10:24:49 -05:00
Žiga Deisinger
cebbc12084 Enable / Disable Touchscreen #481
This commit will reverse the logic of touch screen as suggested by @ArjanOnwezen
2022-01-27 14:23:22 +01:00
Žiga Deisinger
4a0d42ed34 Add code for feature "Disable Touch" 2022-01-26 21:52:08 +01:00
Michał Borsuk
0d5af740a5 correction of spelling of units 2022-01-26 18:08:56 +01:00
Žiga Deisinger
96879d3664 Add code for feature "Disable Touch" 2022-01-26 14:53:31 +01:00
Žiga Deisinger
7af7279ea4 Fix ADS-B not updating Altitude in Map #473
This commit will fix altitude not automatically updating when in Map mode. Also set default altitude for AIS to 0.
2022-01-23 22:34:01 +01:00
Arjan Onwezen
dcb67049af Prepadded MMSI in AIS app with zeros, so it's always 9 chars long as in the specs. 2022-01-16 05:06:53 -05:00
Brumi-2021
4a57af64ce “Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE” 2022-01-15 23:09:42 +01:00
Erwin Ried
30449e0adf
Merge pull request #467 from ArjanOnwezen/gui-glitch-in-adsb-rx
Small GUI glitch in ADSB RX
2022-01-12 19:06:14 +01:00
Arjan Onwezen
c9a813fbd6 GUI glitch in ADSB RX 2022-01-12 10:31:59 -05:00
eried
0da7d2d0ac Version bump 2022-01-12 15:35:35 +01:00
eried
7c8f02d05a Update credits 2022-01-12 15:35:30 +01:00
Erwin Ried
e5015cc67b
Merge pull request #446 from Brumi-2021/“Indep_persistent_memory_14dBs_RF_tx-rx_amp”
Minor improvements to the previous PR #395 Add Gain_TX to Replay App
2022-01-12 15:19:54 +01:00
Erwin Ried
03c9812487
Merge pull request #457 from Brumi-2021/Solving_14dBs_lower_TX_AM_than_FM_TX_in_MIC_App
Minor improvements, to the previous excellent PR #329 AM-SSB-DSB Mic Functional from  aldude999
2022-01-10 11:05:23 +01:00
Erwin Ried
fc08d0ba2d
Merge pull request #452 from ArjanOnwezen/add-operator-to-icao-24
Added operator to ICAO24 file
2022-01-10 11:04:15 +01:00
Erwin Ried
dfa7dfb024
Merge pull request #461 from notpike/touchtunes
Touchtunes EW Mode Feature
2022-01-04 10:55:22 +01:00
notpike
c713d996ad TouchTunes TouchTunes New Feature QA 2022-01-03 20:15:54 -08:00
notpike
c2ff37a1c7 TouchTunes TouchTunes New Feature QA 2022-01-03 19:57:51 -08:00
notpike
8ee650503c TouchTunes TouchTunes New Feature QA 2022-01-03 19:49:50 -08:00
notpike
47014b35ad TouchTunes new functions 2022-01-03 19:14:05 -08:00
Arjan Onwezen
0a05c63c47 added qr code for radiosonde 2022-01-02 17:09:45 -05:00
Brumi-2021
f4403121a1 Minor improvementes to the previous PR #329 AM-SSB-DSB Mic Functionality App 2022-01-01 12:26:35 +01:00
Arjan Onwezen
9792e13cbf fixes and cleanup 2021-12-17 14:27:00 -05:00
Arjan Onwezen
455389f1d1 fixes and cleanup 2021-12-12 05:09:06 -05:00
Arjan Onwezen
4a0a243530 added binary search tree lookup to airlines.db 2021-12-12 04:48:11 -05:00
Arjan Onwezen
3cb9e1849b added ICAO special designators, to aircraft types 2021-12-12 04:38:05 -05:00
Brumi-2021
d0f9073b67 Minor improvementes to the previous PR #395 Add Gain_TX to Replay App 2021-12-05 16:18:52 +01:00
Erwin Ried
e2a2f7a448
Merge pull request #441 from ArjanOnwezen/make-icao24-db
Show aircraft info based on ICAO 24 bit transponder code in ADS-B app
2021-12-03 10:22:58 +01:00
Arjan Onwezen
708111066e removed duplicate file, README changes 2021-12-01 17:32:13 -05:00
Arjan Onwezen
2a2abac244 added aircraft info to ADS-B app 2021-12-01 17:23:40 -05:00
Arjan Onwezen
96db26e884 added icao24.db database and tool generator 2021-11-28 11:08:34 -05:00
Brumi-2021
9f48199a96 Changing background icon to yellow in the decimated files recording 2021-11-27 23:36:44 +01:00
eried
a07683b2a6 Merge branch 'next' 2021-11-24 14:58:11 +01:00
eried
e3de466743 Version bump 2021-11-24 14:55:06 +01:00
eried
3903aec071 Update credits 2021-11-24 13:47:47 +01:00
Erwin Ried
2a11b59ab7
Merge pull request #424 from intoxsick/custom-splash-screen-from-sd
Custom splash screen from sd
2021-11-24 12:35:41 +01:00
Erwin Ried
0d1d703ba9
Merge pull request #426 from heurist1/update_pocsag_decoder
Update pocsag decoder
2021-11-24 12:32:33 +01:00
Erwin Ried
84ea106f79
Merge pull request #433 from Brumi-2021/New_feature_Increase_freq_range_to_App_Capture
Increase more BW Options to Capture App
2021-11-24 12:31:47 +01:00
Erwin Ried
dc06950a94
Merge pull request #419 from Brumi-2021/Final_correction_GCC_10_Compile_error_#199_with_sharebrained_feedback
Final correction gcc 10 compile error #199 with sharebrained feedback
2021-11-24 12:31:29 +01:00
ArjanOnwezen
23ec3ff11b
Update ui_adsb_rx.cpp 2021-11-23 00:16:03 +01:00
Arjan Onwezen
bbd9a865de new airlines_db 2021-11-22 17:13:46 -05:00
Erwin Ried
e985efd78b
Merge pull request #422 from heurist1/adsb-improve-decode-and-gui
Adsb improve decode and gui
2021-11-22 20:53:29 +01:00
Brumi-2021
14484b550a Increase more BW Options to Capture App
PR to increase the BW Options in the Capture App , beyond the current max, 500khz.  (from 600Khz till 2,75Mhz)  all of them work well into  the screen, but only <=  600Khz BW are correctly saved  into SD Card with full captured data. (Onwards, >600Khz optiions, at the moment ,  the created SD card  file has  decimated data, due - to SD Card writting speed limitations),-  but I feel still quite interesting feature to keep them.
2021-11-21 19:35:31 +01:00
heurist1
40654aba55 moved extract frame back into proc_pocsag 2021-11-07 09:00:00 +00:00
heurist1
3bbad90949 Scale new integerised power to a better range 2021-11-06 12:35:37 +00:00
heurist1
a0a1954138 Forgot it was called 128 squared 2021-11-06 10:26:01 +00:00
heurist1
94ec0c9087 Sort scaling in GUI 2021-11-06 10:20:39 +00:00
heurist1
a571e40c59 Changed amp to integer 2021-11-06 10:15:17 +00:00
heurist1
79b24ebe13 Improve output 2021-11-01 22:51:06 +00:00
heurist1
8a4564f6f5 Slow down redraw
Combine improvements and slow down refresh.
2021-11-01 20:37:27 +00:00
heurist1
1a21e06bbe Improved overlap packet detection
Improved overlap detection and reduced the threshold
2021-11-01 19:28:56 +00:00
eried
da380261b2 Version bump 2021-11-01 11:49:42 +01:00
eried
790ebdff31 Updating the contributors list 2021-11-01 11:48:14 +01:00
heurist1
0d51e3569f Improved decode of type 17 at expense of others
Reject all non type 17 packets
2021-10-31 13:23:48 +00:00
heurist1
0d7bbac6a1 Added switching message length
Improves detections in test file from 77 to 80
2021-10-30 00:53:29 +01:00
heurist1
b499380448 Keep items with loc above those without
Removed fixsbt and added a new state of signal without position. Positions stay higher than non positions.
2021-10-29 16:59:52 +01:00
Brumi-2021
ab8f93805d Small correction,of previous PR , about New_Feature_GCC_10_Compile_errors_#199 (based on sharebrained indications) 2021-10-25 18:11:31 +02:00
Brumi-2021
f4db4e2b53 Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax. 2021-10-23 22:17:18 +02:00
heurist1
318720f364 Removed all traces of the parameters on the POGSAG config message
Left in the message for the moment, because there are likely to be parameters needed at some point.
2021-10-22 18:11:50 +01:00
heurist1
6ef24ce71c Removed unused GUI items 2021-10-22 15:41:48 +01:00
heurist1
62f063aef5 Removed unused items from the UI
Removed unused items from the UI
2021-10-21 17:14:08 +01:00
heurist1
110b40ea49 Changed content of table
Changed the columns of the table to be more useful
2021-10-17 10:03:28 +01:00
heurist1
2b045ffca6 Mark where to change 2021-10-15 18:40:02 +01:00
heurist1
be01ca6da1 Significantly improved adsb demod
Change preamble detection, reduce cpu load
2021-10-15 14:26:33 +01:00
heurist1
0fed64636a Store old changes to ADSB
Diff in previous changes to ADSB
2021-10-11 10:14:16 +01:00
heurist1
ab364ca497 POCSAG before reformat
This is the POCSAG code before reformat to put smooth and extract packets in the correct place
2021-10-10 09:15:42 +01:00
heurist1
a49c35088d Added back
Added the ability to use the Up and Left buttons simultaneously to cause the cursor to move to the top left of the screen
2021-10-09 22:46:05 +01:00
Erwin Ried
848dba44d8
Merge pull request #395 from Brumi-2021/New-Feature-Add-Gain_TX-control-to-the-Replay-App
Add Gain_TX control to the Replay App
2021-10-06 01:15:32 +02:00
Brumi-2021
b335886f42 Update main.cpp
Remove initial short wrong Ant-DC_BIAS pulse. (250 msegs aprox)
2021-09-25 16:37:30 +02:00
Erwin Ried
f12eb55f6b
Merge pull request #412 from ArjanOnwezen/fix-backlight-time-out
Fixed #398: Changed datatype to be able to store > 255 second for backlight timer
2021-09-06 06:29:28 +02:00
Arjan Onwezen
6871126100 changed datatype to be able to store > 255 second for backlight timer 2021-09-03 16:46:41 +02:00
Brumi-2021
03eae70555 Add Gain_TX control to the Replay App
Current Replay App , shows in the user menu a UI to select two kind of controls for the RF output level :
1-) LNA GAIN (0..40 ) dB => but it has no TX effect because it is the RX-LNA . GAIN
2-) RF AMP (0 / +14dBm , (that was correct , we have two IC's , RX / TX ) (sw is controlling weill .

Note, although SW Version 1.40 do not leave to control drictly the GAIN TX
, that Replay App , in fact, it was using the inheritated selected GAIN TX from any previous usage of MIC App.

That Pull request alllows now to have the following controls
1-) GAIN TX (0..47 ) dB (now it is OK
2-) RF AMP (0 / +14dBm , (that was correct , we have two IC's , RX / TX ) (sw is controlling weill .

Remakrs : After the change , now we can control the GAIN TX , but not "in the fly" . When we are in the Replay loop , any change of the FREQUENCY or GAIN TX will be ignored , till we play STOP / START the loop again. (but the AMP RF (0 /+14 dBs) it works in the loop withouth any problems (same as before ) .
2021-07-15 18:15:44 +02:00
teixeluis
fe806b7bdc Fixed the mixing of aircraft coordinates in the details view, by
checking if the ICAO address of the frame and the current item
in the details view match. Slight refactor by placing the decimal
to string conversion function into the string_format module.

Added fix in the scope of issue #365

FrequencyStepView field in TransmitterView class

FrequencyStepView field in TransmitterView class

Update ui_transmitter.hpp

Update credits

Fixed left padding of the decimal part of the numbers.
2021-06-24 15:16:19 +01:00
teixeluis
97349b06ef Fixes to the log and screen rendering of the geo coordinates. 2021-06-23 19:54:34 +01:00
teixeluis
2ceb49e4f2 Added more precise function to calculate NL (based on cmath lib).
Created constants for some of the values scattered in the code.
2021-06-19 23:41:06 +01:00
Erwin Ried
8afd83a4e1
Merge pull request #381 from teixeluis/feature-radiosondes-beep-371
Radiosonde beep pitch RSSI improvements. Keeping current frequency in battery backed RAM
2021-06-17 21:48:14 +02:00
teixeluis
8aff0bb4d8 Improved tone generator for proper frequency control. Also
features a square wave mode.
Added proportional beep duration based on the RSSI as well.
Now reading the current radiosonde frequency from the
battery backed RAM instead starting with the same frequency
all the time.
2021-06-16 23:23:47 +01:00
Arjan Onwezen
c8a8a69832 fix save frequency gui glitch 2021-06-14 21:58:15 +02:00
teixeluis
a80d91fb1e More improvements to the rssi tone. Added saving of the tuned frequency
to the radio model persistent store.
2021-06-13 23:35:33 +01:00
teixeluis
43e123bafe Used temporarily for experimental purposes, no longer needed. 2021-06-11 00:25:24 +01:00
teixeluis
c2dc7d1cf5 Slight improvement of the tone generator. 2021-06-11 00:13:56 +01:00
teixeluis
edcd780402 Improved the pitch RSSI. Still looking for better approach. 2021-06-10 12:10:24 +01:00
teixeluis
c85e6a4d52 Now getting rssi events.Pitch changes still to be improved. 2021-06-09 09:10:01 +01:00
teixeluis
f8f5963bcf Merge remote-tracking branch 'portapack-mayhem/next' into feature-radiosondes-beep-371 2021-06-08 23:11:01 +01:00
teixeluis
9040e780bc Added beep on radiosonde packet decoding, and volume widget to control its level. 2021-06-08 23:07:37 +01:00
Erwin Ried
f1ba8c3dee
Merge pull request #361 from ArjanOnwezen/iso-date-time
ISO datetime for Clock, FileManager, Frequency manager, added clock UI options
2021-06-07 23:48:19 +02:00
Arjan Onwezen
226c0c2d80 fix for freq manager save file 2021-06-06 01:31:30 +02:00
Arjan Onwezen
6bc2cbeda9 ISO datetime for Clock, FileManager, Frequency manager
Added option to show/hide clock (with/without date)
2021-05-17 23:16:15 +02:00
Arjan Onwezen
c307e9d5ae proc_aprsrx.cpp compile warning fix 2021-05-12 08:09:04 +02:00
Erwin Ried
a090f1fb0d
Merge pull request #354 from ArjanOnwezen/ui_aprs_rx_cpp_warning_fix
ui_aprs_rx.cpp compiler warning fix
2021-05-12 02:20:55 +02:00
Erwin Ried
62b789e432
Merge pull request #353 from ArjanOnwezen/dsp_modulate_cpp_warning_fix
dsp_modulelate.cpp compiler warning fix
2021-05-12 02:20:17 +02:00
Erwin Ried
42b33c4526
Merge pull request #355 from ArjanOnwezen/aprs_packet_hpp_warning_fix
aprs_packet.hpp compiler warning fix
2021-05-12 02:19:57 +02:00
Arjan Onwezen
a3ef7d069e ui_adsb_rx.hpp compiler warning fix 2021-05-11 21:47:55 +02:00
Arjan Onwezen
f5c3219035 aprs_packet.hpp compiler warning fix 2021-05-10 21:30:45 +02:00
Arjan Onwezen
a2e4a15229 dsp.modulelate.cpp compiler warning fix 2021-05-10 19:31:48 +02:00
Arjan Onwezen
1a8319b86e /havoc/firmware/application/apps/ui_aprs_rx.cpp:51:7: warning: unused variable 'entry_age' [-Wunused-variable]
/havoc/firmware/application/apps/ui_aprs_rx.cpp:345:12: warning: unused variable 'age' [-Wunused-variable]
2021-05-10 16:28:46 +02:00
Erwin Ried
2ab4ed591d
Update ui_about_simple.cpp 2021-05-03 04:00:39 +02:00
eried
85e4a43cbd Version bump 2021-04-22 09:34:52 +02:00
Erwin Ried
5f778c1734
Update ui_about_simple.cpp 2021-04-19 10:04:50 +02:00
Erwin Ried
c19bcc17af
Merge pull request #341 from fossum/feature/adding-snap-values-to-calls
Added a couple snap values to the calls app.
2021-04-19 10:04:07 +02:00
Eric Fossum
d60299af95 Added a couple snap values to the calls app. 2021-04-17 22:20:28 +00:00
eried
57ed3ebb43 Merge branch 'pr/325' into next 2021-04-14 09:30:53 +02:00
Erwin Ried
e21fbbf234
Merge pull request #329 from aldude999/next
AM/SSB/DSB Microphone Functionality
2021-04-14 09:26:09 +02:00
Erwin Ried
136209dc8d
Update ui_about_simple.cpp 2021-04-14 09:25:38 +02:00
Erwin Ried
838451f491
Merge pull request #339 from eried/recognition-of-audio-chip
Recognition of audio chip
2021-04-14 09:24:46 +02:00
Erwin Ried
4c50401df2
Update ui_about_simple.cpp 2021-04-12 13:29:01 +02:00
zhang00963
a0eaa70ff4 Realize the automatic recognition of audio chip, including ak4951en/wm8731/wm8731s,Try to fix the max2837 temperature problem 2021-04-11 02:19:31 +08:00
Erwin Ried
41864f06e7
Delete ui_mictx.cpp.1 2021-03-22 10:10:01 +01:00
Erwin Ried
133bfbf07b
Delete ui_mictx.hpp.1 2021-03-22 10:09:41 +01:00
DESKTOP-R56EVJP\Alex
f65852ff05 Rebased code from new eried repo commits. Changed to to reflect strijar implementation. Fixed previous issue with old ssb-am-tx ui_mictx code. 2021-03-21 20:21:50 -05:00
Erwin Ried
603b7fb1ab
Merge pull request #286 from GullCode/ui_looking_glass_warning_fix
Fixed redefined define, possibly overflowing variable, missing constructors
2021-03-16 14:46:23 +01:00
Erwin Ried
9d437aee6a
Merge pull request #278 from GullCode/tv_collector_warning_fix
removed unused variables
2021-03-15 11:45:50 +01:00
Erwin Ried
fe98a58a4f
Merge pull request #277 from GullCode/adsb_warning_fix
Fix adsb warnings
2021-03-15 11:45:32 +01:00
Erwin Ried
ee2ebc8302
Merge pull request #272 from euquiq/RADIOSONDE_METEOMAN_LAT_LON_BUG_FIX
Fix bug on radiosonde Meteoman Lat & lon calculation
2021-03-15 11:44:21 +01:00
East2West
f15cf78101
Add APRS Receiving App 2021-03-11 22:27:19 -06:00
Erwin Ried
eca25898f2
Merge pull request #276 from GullCode/chibios_warning_fix
Fix warning: cast between incompatible function types
2021-02-16 09:12:22 +01:00
Erwin Ried
aea807e1f4
Merge pull request #280 from GullCode/proc_am_audio_warning_fix
Quoted out unused variable
2021-02-16 09:11:20 +01:00
Erwin Ried
8807ab179b
Merge pull request #283 from GullCode/proc_btlerx_warning_fix
Quoted CRC calculus as it's unused, voided message
2021-02-16 09:10:42 +01:00
Erwin Ried
7049373d67
Merge pull request #288 from GullCode/ui_navigation_warning_fix
Added missing brace
2021-02-16 09:10:08 +01:00
Erwin Ried
3c30c127e2
Update ui_navigation.cpp 2021-02-16 09:09:49 +01:00
ImDroided
62c1e4e028 Added Pocsag bitrate
I added 3200 to the bitrates in pocsag per a user request on Facebook.
2021-02-14 12:52:56 -06:00
GullCode
cd8732c24f Direct casting to int instead of new var 2021-02-05 23:08:54 +01:00
Erwin Ried
4f90c5efee
Updating contributors list 2021-02-03 22:23:12 +01:00
Erwin Ried
e0e57e5af2
Merge pull request #290 from GullCode/ui_tv_warning_fix
removed unused var
2021-02-03 22:20:34 +01:00
Erwin Ried
d59b0d44d3
Merge pull request #282 from GullCode/proc_am_tv_warning_fix
Quoted unused vars and voided one
2021-02-03 22:09:06 +01:00
Erwin Ried
5ca7398bd9
Merge pull request #279 from GullCode/proc_capture_warning_fix
fix unused result
2021-02-03 22:08:43 +01:00
Erwin Ried
dbb46edcb6
Merge pull request #285 from GullCode/proc_nrfrx_warning_fix
Removed unused and voided a var
2021-02-03 22:07:58 +01:00
Erwin Ried
68e75cc98e
Merge pull request #293 from GullCode/ui_scanner_warning_fix
Fixed uninitialized / missing switch cases, unused
2021-02-03 22:07:13 +01:00
Erwin Ried
f0ca95ee7e
Merge pull request #274 from GullCode/sonde_packet_warning_fix
Moved calibytes and calfrchk to cpp file to avoid unused warning
2021-02-03 22:06:27 +01:00
GullCode
1a48fb8c5a removed a var, added a void, removed a unused initializer 2021-01-28 10:08:57 +01:00
Erwin Ried
1a3a60f6ac
Merge pull request #281 from GullCode/proc_audio_tx_warning_fix
Added missing initialisation
2021-01-28 00:23:42 +01:00
Erwin Ried
77a7f48958
Merge pull request #284 from GullCode/proc_pocsag_warning_fix
Added missing initialisations
2021-01-28 00:23:10 +01:00
Erwin Ried
523877e0d1
Merge pull request #287 from GullCode/ais_packet_warning_fix
Added missing default constructor
2021-01-28 00:22:37 +01:00
Erwin Ried
282416169d
Merge pull request #289 from GullCode/ertkey_warning_fix
Added missing default constructor
2021-01-28 00:18:31 +01:00
Erwin Ried
8e8e156477
Merge pull request #291 from GullCode/ui_fileman_warning_fix
Added a voided v
2021-01-28 00:16:40 +01:00
Erwin Ried
b1135aab0a
Merge pull request #292 from GullCode/ui_morse_warning_fix
added a voided var
2021-01-28 00:16:27 +01:00
Erwin Ried
36f9e0cb7c
Merge pull request #294 from GullCode/ui_settings_warning_fix
Added missing initializer
2021-01-28 00:16:07 +01:00
Erwin Ried
9bd74f32d0
Merge pull request #295 from GullCode/ui_sonde_warning_fix
Added missing initializer
2021-01-28 00:15:39 +01:00
Erwin Ried
dd0042b5f1
Merge pull request #297 from GullCode/soundboard_app_warning_fix
added a voided var
2021-01-28 00:14:55 +01:00
GullCode
fb61ad55c0 added a voided var 2021-01-27 17:20:07 +01:00
GullCode
ca7b5e110c Added missing initializer 2021-01-27 17:10:37 +01:00
GullCode
a6a41ca5a5 Added missing initialize 2021-01-27 17:08:09 +01:00
GullCode
02d69e54eb Fixed uninitialized / missing switch cases, unused 2021-01-27 17:03:20 +01:00
GullCode
b75ef345a5 added a voided var 2021-01-27 16:57:42 +01:00
GullCode
8c84719598 Added two voided vars 2021-01-27 16:54:17 +01:00
GullCode
8bfeba0d89 Added a voided v 2021-01-27 16:50:48 +01:00
GullCode
c3c680fc04 removed unused var 2021-01-27 16:46:58 +01:00
GullCode
f0457c106d Added missing default constructor 2021-01-27 16:43:13 +01:00
GullCode
5d73175a17 Added missing brace 2021-01-27 16:39:50 +01:00
GullCode
45b874694e Added missing default constructor 2021-01-27 16:36:44 +01:00
GullCode
42113434f0 Fixed redefined define, possibly overflowing variable, missing constructors 2021-01-27 16:30:09 +01:00
GullCode
e9e4d20302 Removed unused and voided a var 2021-01-27 16:11:20 +01:00
GullCode
ec520bf08c Added missing initialisations 2021-01-27 16:07:03 +01:00
GullCode
486c1d6bcd Quoted CRC calculus as it's unused, voided message 2021-01-27 16:02:59 +01:00
GullCode
b7eb095dd8 Quoted unused vars and voided one 2021-01-27 15:58:56 +01:00
GullCode
3c14d38286 Added missing initialisation 2021-01-27 15:54:45 +01:00
GullCode
3166a66756 Quoted out unused variable 2021-01-27 15:52:17 +01:00
GullCode
961e115cc6 fix unused result 2021-01-27 15:48:41 +01:00
GullCode
1483160df4 removed unused variables 2021-01-27 15:45:04 +01:00
GullCode
c3fe053eb2 Fix adsb warnings 2021-01-27 15:38:05 +01:00
GullCode
6c2950cfe8 Fix warning: cast between incompatible function types from 'void (*)(void *)' to 'msg_t (*)(void *)' 2021-01-27 15:32:46 +01:00
Erwin Ried
89d46d59ee
Merge pull request #275 from GullCode/channel_stat_collector_warning_fix
Fix __SIMD32 warning
2021-01-27 15:22:39 +01:00
GullCode
266e398224 Fix __SIMD32 warning 2021-01-27 15:16:43 +01:00
GullCode
e75677d366 Moved calibytes and calfrchk to cpp file to avoid unused warning 2021-01-27 15:09:02 +01:00
GullCode
1c1d3e9897 missing contructor 2021-01-27 14:57:22 +01:00
euquiq
50bab791dd Fix bug on radiosonde Meteoman Lat & lon calculation
The underlying function used for calculating Latitude and Longitude -also used in other places inside the radiosonde app- was returning a positive value always.

But it needs to cope with negative values also (i.e. Lat and Lon)

Fixed by just changing the returning value into int32_t (even if the calculation is done in uint32_t, the actual sign is passed thru when returning the calculated value -those are the same 4 bytes, interpreted either as (before) unsigned or (now) signed)
2021-01-25 23:41:19 -03:00
eried
000b2d3e7d Version bump 2021-01-20 10:02:52 +01:00
Erwin Ried
d5e6d9d662
Merge pull request #257 from strijar/waterfall-bar
Waterfall filter bar
2021-01-12 21:57:19 +01:00
Erwin Ried
64bdd3e018
Merge pull request #263 from euquiq/JAMMER-TX_COOLDOWN_TIMERS_IN_SECONDS
JAMMER NOW INCLUDES TWO TIMERS
2021-01-12 21:57:04 +01:00
euquiq
928bce083a Cosmetics + Jammer now in green + Jitter
I think the Jammer deserves a green icon, since it actually does it job pretty well.

Then there is a Jitter parameter. It allows to introduce a jitter from 1/60th of a second up to 60/60th of a second (a full one). It will delay / move forward either the TX or the cooldown period for a maximum of a half of the time you choose as jitter.

Meaning: If I choose 60/60th, a full second of jitter, it will produce a random number from 1 to 60.

Then it will calculate jitter = 30 - randomnumber

THen it will "add" that (positive or negative) time to the  time counter for the next jitter change of state.
2021-01-08 11:54:21 -03:00
euquiq
8859c3d80c JAMMER NOW INCLUDES TWO TIMERS
Each driving the TX and COOLDOWN timers.
2021-01-07 17:51:38 -03:00
Белоусов Олег
1e9406d091 Cleaned up a bit 2020-12-24 11:14:23 +03:00
Белоусов Олег
63f6a885d8 Implemented correct display of the filter indicator on the waterfall 2020-12-23 18:00:51 +03:00
euquiq
6aee1c9c30 just making Persistent Memory easier to read
Some internal code re-writing in order to simplify a bit, and hopefully making it easier to understand what's going on inside there.
2020-11-03 02:14:16 -03:00
Erwin Ried
2fa6df596a New icon and shortcut 2020-11-01 17:26:29 +01:00
Erwin Ried
aeefecf5c6 Version bump 2020-10-31 22:00:19 +01:00
Erwin Ried
06d4916144
Merge pull request #187 from rascafr/rascafr/scanner-app-load-frequency-files
Scanner app - Load custom frequency files
2020-10-27 22:03:26 +01:00
Erwin Ried
911f0c8881
Merge pull request #213 from euquiq/Fix-APRS-TX-app
Fix aprs tx app
2020-10-27 21:57:50 +01:00
Erwin Ried
01cfd360fe
Merge pull request #215 from euquiq/looking_glass_full_bw_cascade_scanner
New "looking Glass" app
2020-10-27 21:57:11 +01:00
euquiq
13ce56f7bf Added "RESOLUTION" parameter
Discord User jteich did some investigation (Thanks!) and helped me understanding this rather obscure parameter:

Internally, is called "TRIGGER", and is passed into the baseband when configuring the desired spectrum sample rate.

Please forgive me in advance if this explanation is not 100% correct. It's only my interpretation, based on my own observation and jteich's comments over Discord chat.

This trigger parameter apparently determines the amount of data over time used for calculating the signal's power inside each specttrum's bin, before considering it "done".

In short, if you lower this resolution value then the cascade will tend to be rendered a bit faster, while kind of blind to tiny signals.

On the other hand, a bigger value will help rendering and distinguishing different signals on the cascade.

Too big a value can easily clutter up the cascade. But then it may be a "blessing" when inspecting higher freuqencies -where hackrf is more deaf"

The default value of 32 is quite decent. But then, now you can experiment with it. Cheers
2020-10-26 23:43:35 -03:00
euquiq
210ec9dd1b Looking Glass with PRESETS
Added a PRESETS.TXT file (inside /LOOKINGGLASS folder).

Also optimized the way the spectrum signal is integrated into the cascade.

Added provision for ranges lower than 240MHz but I am afraid that at this time it will not be advisable to lower ranges any more than 240MHz, since some artifacts and frequency running - moving out of place- occurs.

I can only hope that someone with a better understanding of hackrf's inner code can fix this issue and perhaps enhance the scanning speed.

I found some "original commenting" inside the code:

	// TODO: Move more low-level radio control stuff to M4. It'll enable tighter
	// synchronization for things like wideband (sweeping) spectrum analysis, and
	// protocols that need quick RX/TX turn-around.

Which makes me think that there are things "missing"  from the portapack side of the code, for allowing serious speed sweeping. So I am concluding that with current "portapack framework" this might be "the best possible thing".

It is to be noted that the "new" internal sweep mode code is signed by:

 * Copyright 2016 Mike Walters, Dominic Spill
 *
 * This file is part of HackRF.

Maybe Mike or Dominic can be contacted and hopefully lend a hand on enhancing this code.
2020-10-26 12:53:10 -03:00
Erwin Ried
47c5c1e9e5 Update generate_world_map.bin.py
Fix for https://github.com/eried/portapack-mayhem/issues/217
2020-10-24 22:38:43 +02:00
dqs105
7ca322fed4 Added options for tuning CLKOUT freq.
- Now we have variable CLKOUT.
- CLKOUT can be set between 10kHz and 60MHz.
(The output signal will become mostly sine shape when reaching 50MHz.)
- Click on freq setting field to change tuning step.
2020-10-24 00:24:05 +08:00
euquiq
3e1d726064 Enhancement and bug
Added a nicer MARKER (thanks to XSX(H1) contributor for the suggestion)

Fixed a bug that made the screen scroll from top, when using a popup "window" and returning (like, when pressing the DC VOLTAGE enable / disable" button on top bar) THanks to GregoryFenton for the testing and bug spotting!
2020-10-23 12:19:57 -03:00
euquiq
01ba7a57ea New "looking Glass" app
Capable of showing a cascade with full bandwidth scan. You can select Min and Max Mhz for the cascade.

You can move a marker so to (aproximately) know  a particular frequency on the cascade. If you press the select button, the app will jump into the RX -> AUDIO app, already tuned into the just "marked" frequency.

This first version SURELY has space for lots of optimizations and improvement in general.
2020-10-21 13:21:34 -03:00
dqs105
699504a703 Removed trailing spaces. 2020-10-14 20:35:51 +08:00
dqs105
48ccc1e988 Merge branch 'clkout_enable' of https://github.com/dqs105/portapack-mayhem into upstream 2020-10-14 20:15:36 +08:00
euquiq
95f7eda9c5 APRS TX app is working fine now!
Several old bugs squashed.

On the APRS side, most notably, SSID numbers where shifted left twice, instead of once, and bits 5,6 where not properly set.

On AX.25 side, the bit stuffing part of the encoder was not placing the zero bit on the right place.

Finally, I changed APRS icon from ORANGE to GREEN, since even this may be a simple app, now it's doing its work as intended.
2020-10-10 20:24:11 -03:00
euquiq
b22448de75 Fixes SSID value error on APX TX
Values where left bit-shifted upon being entered by the user, so resulting SSID being transmitted was a different number.  This shifting was happening both on Source and Destination SSID values.
2020-09-28 17:54:27 -03:00
Erwin Ried
98ba332cda Version bump 2020-09-25 03:34:51 +02:00
Erwin Ried
f3503e6844 Fix for the freezing when no on_touch_release function 2020-09-25 03:34:05 +02:00
Erwin Ried
883a62238d Version bump 2020-09-24 22:04:59 +02:00
Erwin Ried
e75dfdaf2d
Merge pull request #196 from strijar/morse_tx
Bug fix
2020-09-24 10:33:06 +02:00
Белоусов Олег
cafc4fdec4 Bug fix 2020-09-24 11:04:00 +03:00
Erwin Ried
99af859e13 Default null for on touch release and press
Fixes https://github.com/eried/portapack-mayhem/issues/194
2020-09-24 03:15:40 +02:00
Белоусов Олег
25ba2f1391 Morse TX loops 2020-09-22 16:12:46 +03:00
Белоусов Олег
a5a3ba184a Morse TX speed in WPS 2020-09-22 11:46:44 +03:00
dqs105
e89b7683ef
Fixed "Stop After" freeze & stronger CW signal 2020-09-19 14:24:40 +08:00
dqs105
1029322405
Fix "Stop After" Freeze. 2020-09-19 14:22:28 +08:00
dqs105
66a841e079 combine clkout_config => ui_config 2020-09-17 12:47:34 +08:00
dqs105
b15b781039 Added options for enabling CLKOUT.
- CLKOUT can be enabled in Radio settings and status bar.
- Fixed a typo(I believe) in ui_navigation.
2020-09-16 19:27:56 +08:00
Erwin Ried
55783a60f5 Update ui_navigation.cpp 2020-09-15 23:13:31 +02:00
Erwin Ried
e76ec66023 Adding contributors 2020-09-15 23:13:01 +02:00
Erwin Ried
bf068abba3 Microphone app button rename 2020-09-15 23:12:50 +02:00
Erwin Ried
8949662eee Version bump 2020-09-15 22:10:17 +02:00
Erwin Ried
3d9ce8a037 Merge branch 'pr/166' into Radiosonde-vaisala-add-temp-humidity-merge-conflicts-fix 2020-09-14 23:11:08 +02:00
Erwin Ried
95be75a8af
Merge pull request #172 from dqs105/new_splash
New custom splash.
2020-09-14 22:53:59 +02:00
Erwin Ried
7fd9adf3f2
Merge pull request #171 from euquiq/mic-tx-rx-into-main-menu
Menu changes
2020-09-14 22:51:49 +02:00
Erwin Ried
3aaa4a0ba1
Merge pull request #161 from dqs105/mic_tx_rfgain
Added TX Gain control & code simplification
2020-09-14 22:50:35 +02:00
Erwin Ried
875db13917
Merge pull request #170 from dqs105/siggen_amp
Remove hard-coded rf_amp on.
2020-09-14 22:46:53 +02:00
Erwin Ried
1a94f4a1ab
Merge pull request #174 from ITAxReal/ax_fork
SoundBoard App Improvements
2020-09-14 22:46:00 +02:00
Erwin Ried
4390647e28
Merge pull request #184 from rascafr/rascafr/freq-manager-hide-tmp-dot-files
Hide temporary & OS system files from category files list
2020-09-11 22:18:20 +02:00
Rascafr
f95467d71b loaded_file_name goes back to default 'scanner' file if load step fails 2020-09-11 22:17:40 +02:00
Rascafr
200c57f990 Save new frequencies into the default / user loaded freqman txt file 2020-09-11 22:15:35 +02:00
Rascafr
d2c66f4515 Removed confirmation modal after load is successful 2020-09-11 22:07:12 +02:00
Rascafr
dbdb0bd379 Added ui_scanner load button for any .txt frequency file 2020-09-11 21:11:42 +02:00
Rascafr
fcdbedca98 Bad emplace_back code position fix 2020-09-11 20:46:41 +02:00
Rascafr
ccb3937e37 Hide .dot tmp / system files from list in frequency manager module 2020-09-11 20:34:15 +02:00
Erwin Ried
c4052064a9
Merge pull request #182 from rascafr/file-manager-hide-tmp-dot-files
Hide temporary & OS system in Frequency Manager
2020-09-11 15:02:16 +02:00
Rascafr
dd5e63abd3 Hide empty & .dot tmp / system files in freq manager 2020-09-11 12:25:10 +02:00
dqs105
5cbbf62c5f Removed drawRAW.
- BMP files can be loaded directly now, so it can be removed.
2020-08-29 10:53:26 +08:00
ITAxReal
8a4e6492d9 More Improvements on SoundBoard
Optimizing and fixing
2020-08-28 23:59:33 +03:00
ITAxReal
668afccc28 > But it's a sound board not a music player....  Maybe make it say sounds instead of songs? Paging was a great idea however.
Okay, okay.
2020-08-28 22:22:39 +03:00
ITAxReal
e466c14c88 Improved SoundBoard app:
* No device freeze when you try to close app while it's transmitting
* Bypassed 100 .wav files limit by implementing paging functionality
* Removed useless progressbar and implemented page info line instead
2020-08-28 21:47:56 +03:00
dqs105
80f074b82f Added BMP file support.
- Now can load splash.bmp!
2020-08-28 12:23:52 +08:00
dqs105
7116ca3f91 Fixed typo. 2020-08-28 00:27:52 +08:00
dqs105
8463cba4b6 Splash generator.
(Modified from the one generates world_map.bin)
2020-08-28 00:22:36 +08:00
dqs105
78f2e417d6 Fixed RGB565 mode & clean up 2020-08-28 00:21:09 +08:00