Commit Graph

116 Commits

Author SHA1 Message Date
Rascafr
d2c66f4515 Removed confirmation modal after load is successful 2020-09-11 22:07:12 +02:00
Rascafr
dbdb0bd379 Added ui_scanner load button for any .txt frequency file 2020-09-11 21:11:42 +02:00
Erwin Ried
d79f3ce028
Merge pull request #137 from eried/debug-temperature
Debug temperature
2020-08-15 15:58:36 +02:00
Erwin Ried
c56d84d037
Merge pull request #136 from eried/new-scanner-ui
New scanner ui
2020-08-15 15:56:21 +02:00
Erwin Ried
646b7b564e
Merge pull request #110 from strijar/audio-spectrum
Audio spectrum
2020-08-15 15:54:08 +02:00
Erwin Ried
cc2046b607
Merge pull request #119 from euquiq/MIC_TX_RX_with_volume_and_squelch
MIC TX Now includes RX with Volume and Squelch
2020-08-15 15:53:48 +02:00
Erwin Ried
1fc9a1c6e8
Merge pull request #120 from eried/WAV-viewer-bug-when-wav-file-format-is-wrong
Update ui_view_wav.cpp
2020-08-15 15:53:27 +02:00
Erwin Ried
5a3da3bd6a
Merge branch 'v1.2' into add-heading-to-geomap 2020-08-15 15:52:53 +02:00
Erwin Ried
40785e8094
Merge pull request #135 from euquiq/radiosonde-vaisala-rs41-decoding
Radiosonde-app-Vaisala-rs41-decoding
2020-08-15 15:51:10 +02:00
euquiq
c7b0fbc359 Radiosonde-app-Vaisala-rs41-decoding
Added the Vaisala RS41 data packet decoding.

Changed the default freq from 402.0 to 402.7 Mhz, since it is more popular freq.

Lowered the frequency stepping, so it is easier to fine-tune the exact freq center, if needed.

Sonde's Serial ID is passed into the VIEW MAP, so now the sonde is labelled on the map.
2020-08-14 15:51:12 -03:00
Joel Wetzell
f6437adc60 Reorganixe ADSBDetailsView 2020-08-11 11:26:54 -05:00
Joel Wetzell
13ba70f6c5 Fix negative altitude on DetailsView 2020-08-11 11:26:36 -05:00
Joel Wetzell
bbae5047d1 Fix ADSB heading math and add heading to ADSB log 2020-08-10 22:55:20 -05:00
Erwin Ried
c7082455c1 Super simple about 2020-08-08 23:06:53 +02:00
Erwin Ried
b49ad91d24 Update ui_view_wav.cpp 2020-08-07 22:20:54 +02:00
euquiq
6d131ccfd4 sorry, little detail
That include is not needed
2020-08-07 16:35:06 -03:00
euquiq
d50ea3cc50 fixed a bug, and some fine-tuning
Earlier code did not start with squelch totally open, but a tiny bit closed.  (now at app loading, squelch is truly set up with the same value it shows on screen).

I also hardcoded the NFM sampling rate and baseband bandwidth. It seemed "the right thing to do".
2020-08-07 16:33:17 -03:00
euquiq
72f3eea131 MIC TX Now includes RX with Volume and Squelch
You can enable RX and adjust VOLUME  and SQUELCH into your liking.

Sadly enough, you will NOT be able to use VOICE ACTIVATION when RX is enabled (to ensure there will be NO audio feedback defeating the VA sensing)

A "bug" that won over me, but perhaps and hopefully other coder can easily fix:  The Vumeter will momentarily "dissappear" when enabling RX. But it will reappear as soon as you start TX. Or when you turn off RX.

I enabled the PEAK LEVEL MARK on the Vumeter, so you can easily see in which level your input voice / signal is peaking and regulate the MIC gain accordingly in an easier / more robust way.

Side enhancement: Took off the dark green, yellow and red coloring from the vumeter when no signal is present, and replaced it with dark_grey. I know that some coloring is "eye-candy" but the vu-meter is more readable with this new contrast.
2020-08-07 00:19:37 -03:00
euquiq
bb264dcf57 fixes file renaming on subdir
The file rename function needs to be called with full_path/old_name  and full_path/new_name.

Instead, it was called with full_path/old_name and new_name ... thus the renamed file ended on the root dir (path not preserved).
2020-08-04 14:24:16 -03:00
euquiq
1b2c68b3c0 New squelch behavior and fixes
Squelch value now goes from -90 to +20 and it's directly compared against the max_db parameter returned from each freq scanned by the radio subsystem, with no adjusts or manipulation (you adjust the number as will be used).

Less squelch means weaker signals will trigger it. (as expected).

There was a tiny cosmetic bug when you deleted a frequency from the scanning memory: The description was not erased from screen and you could see it while the scan did not resume.

There was another bug on the pause button: If you asked for another manual scan range when paused, the button kept the text "RESUME"  (its text was not reset to "PAUSE" again).
2020-08-01 00:58:34 -03:00
Белоусов Олег
7ec7a9e07c Cleanup 2020-07-31 13:51:35 +03:00
Белоусов Олег
6f58c7929a Spectrum Width and Speed Settings 2020-07-31 13:47:40 +03:00
euquiq
ee67f74fa7 Added two new buttons and other enhancements
Added buttons for:

Change scanning direction (ascending / descending)

Saving current freq into the SCANNER.TXT file

(Please notice that, on the other hand -for safety issues- the DEL FQ button, deletes the frequency only from the temp memory on the actual scanning session, but does NOT erases the freq. inside the SCANNER.TXT)

Also there are other bug fixes and scanning speed enhancements.
2020-07-28 21:05:10 -03:00
euquiq
03084251c5 Added MIC TX and FREQ DEL buttons
MIC TX button :Shortcut for jumping into TX -> MIC app.

FREQ DEL button: Deletes currently displayed frequency from temporary scanning memory. Ideal to get rid of those not wanted "noisy" freqs in the middle of a range scan.

Also, some code optimizations thrown in.
2020-07-28 01:21:52 -03:00
Joel Wetzell
01101ecef2 position string formatting 2020-07-25 12:26:10 -05:00
euquiq
e8f6e1389e better "squelch" and coloring big numbers
When scanner finds a freq with high dbi, it locks into it "listening" a bit more (less than a second) for either confirm or discard it as an actual high dbi or just a spurious thing.

The big number frequency changes color accordingly: Grey = just scanning, yellow = locking in, Green = Found something, allowing the user to listen.
2020-07-25 14:07:03 -03:00
Joel Wetzell
f32584c553 Add heading and speed to detail view 2020-07-25 10:22:21 -05:00
Joel Wetzell
62df30eae3 add heading information to adsb details view 2020-07-24 18:56:09 -05:00
Joel Wetzell
ea574ef61f Set Sonde heading out of bounds 2020-07-24 16:10:57 -05:00
Joel Wetzell
f08949acd7 Add Heading to ADSB and Map Updating 2020-07-24 16:09:21 -05:00
euquiq
f50b376cbd Update ui_scanner.hpp
Sorry, I missed this before: These two includes are NOT necessary anymore.
2020-07-20 17:43:30 -03:00
euquiq
27f566be8f scanner-enhanced-version
New ui_scanner, inspired on AlainD's (alain00091) PR: https://github.com/eried/portapack-mayhem/pull/80

It includes the following:

1) A big frequency numbers display.

2) A Manual scan section (you can input a frequency range (START / END), choose a STEP value from an available of standard frequency intervals, and press SCAN button.

3) An AM / WFM / NFM scan mode selector, changing "on the fly".

4) A PAUSE / RESUME button, which will make the scanner to stop upon you listening something of interest

5) AUDIO APP button, a quick shortcut into the analog audio visualizing / recording app, with the mode, frequency, amp, LNA, VGA settings already in tune with the scanner.

6) Two enums are added to freqman.hpp, reserved for compatibility with AlainD's proposed freqman's app and / or further enhancement. More on this topic:

ORIGINAL scanner just used one frequency step, when creating scanning frequency ranges, which was unacceptable.  AlainD enhanced freqman in order to pass different steppings along with ranges.  This seems an excellent idea, and I preserved that aspect on my current implementation of thisscanner, while adding those enums into the freqman just to keep the door open for AlainD's freqman in the future.

7) I did eliminate the extra blank spaces added by function to_string_short_freq() which created unnecessary spacing in every app where there is need for a SHORT string, from a frequency number. (SHORT!, no extra spaces!!)

8) I also maintained AlainD idea of capping the number of frequencies which are dynamically created for each range and stored inside a memory based db. While AlainD capped the number into 400 frequencies, I was able to up that value a bit more, into 500.

Cheers!
2020-07-20 16:43:24 -03:00
euquiq
5b449b182f
Addd Newline at the end
tiny detail
2020-07-05 00:39:23 -03:00
euquiq
87cc3c89d5 Fixes File manager freezing on absent or empty SD 2020-07-05 00:33:53 -03:00
euquiq
b0880d6eff Nicer debug -> temperature graph
Lowered the scale -10 ºC so it accomodates less than zero temperatures, present sometimes when cold starting the system.

Added 1 char for temperature label length.

Adjusted the max2837 sensor value -> ºC temp result, by normalizing the conversion to correctly display the standard 25ºC, mentioned in Datasheet.
2020-06-29 18:01:15 -03:00
eried
5677b0faf1 Some titles were too long 2020-06-28 21:42:19 +02:00
eried
9096532eee Merge branch 'new-antenna-length-calculator' 2020-06-28 21:35:36 +02:00
eried
728426c5e7 Just minor changes 2020-06-28 21:35:14 +02:00
eried
d175e33990 Show infinite+ if freq is 0 and small tweaks 2020-06-28 20:05:31 +02:00
eried
dfa524eac0 Slighty larger steps 2020-06-28 17:42:11 +02:00
eried
a81ab66994 Show all antennas even if they are off range 2020-06-28 17:41:32 +02:00
eried
3190eec36a Title was too long 2020-06-28 15:41:55 +02:00
eried
65ab23fd3c Comma as separator 2020-06-28 14:19:09 +02:00
euquiq
8443008dfa New Antenna length Calculator
It reads the antennas definition from a txt file:

WHIPCALC/ANTENNAS.TXT

Inside the textfile you place each antenna you own with the following sintaxis:

<antenna label> <elements length in mm, separated by a space>

For example:

ANT500 185 315 450 586 724 862

Input the required frequency, adjust the wave type (full / half / quarter, etc.) and the calculator will return the antenna length (metric and imperial) while also calculating how much you need to expand the fitting antennas you got defined on the txt.

It may return up to 8 matching antennas, which is more than enough (normally you will have 2, perhaps 3 telescopic antennas around for your portapack)

If by any chance your antennas txt got more than 8 antennas, and more than 8 matches the length of the freq / wave you want, it will only show the first 8 matching antennas and will warn you at the bottom that there are even more results (hidden).

All calculations now are rounded into the best integer, considering first decimal, so precision is double than the original antenna calculator app.
2020-06-27 23:59:11 -03:00
euquiq
77b56810e8 GPS SIMULATOR EXIT ON PLAY FIX
Now, if you exit the GPS SIMULATOR while transmitting, it will properly stop the radio and won't crash, exiting as expected.
2020-06-16 02:18:29 -03:00
euquiq
46c076c296 Antenna length Calculator fix
Calculation now rounds up decimals so result is more accurate.
2020-06-13 21:21:32 -03:00
eried
bf3f9cfe75 Setting for hiding the speaker 2020-06-08 01:23:23 +02:00
eried
89f953c75e Update ui_scanner.cpp 2020-06-07 21:35:55 +02:00
Jonathan Elder
086f3098c4 Scanner features (#55) - Added freq description to scanner display. 2020-06-07 21:35:55 +02:00
eried
c232287023 Icons and colors changes 2020-06-07 21:35:55 +02:00