Timo Taskinen
50bd08d9ff
Fix AM bandwidth and sampling rate in scanner ( #671 )
...
In scanner app, the bandwidth and sampling rate for AM modulation was incorrect. This resulted in high pitched and distorted sound. I have now copied the settings from the Audio receiver app, and now the sound in Scanner sounds good also in AM mode.
2022-06-07 11:05:17 +12:00
jLynx
39134b62c3
Fix for new H2+ devices ( #666 )
...
* WIP Fix for new h2+ devices
* reset
* Updated sub module
2022-06-05 14:15:44 +12:00
Jared Boone
e5a30b4309
Persistent memory check value verification, defaulting when fails. ( #662 )
...
* Make default constructor for touch calibration
* Add persistent memory check value and access abstraction.
* Add persistent data_t default constructor with reasonable defaults.
* serial_format_t default constructor.
* Tidy up backlight timeout type.
* Add persistent data struct version/checking.
* Make range_t functions constexpr.
* Move ui_config and functions into class.
* Add backlight_config_t struct, separate enable and time settings.
2022-05-29 08:55:18 +12:00
Brumi-2021
379ad6dbf0
Recovered_ALC_Mic_Feature_AK4953_OK_WM8731
2022-05-28 22:29:10 +02:00
ArjanOnwezen
a3ee160e27
Merge pull request #643 from ArjanOnwezen/save-more-app-settings
...
Save most common settings for TX apps
2022-05-13 21:42:51 +02:00
Arjan Onwezen
ade0d6c68f
French translations.
2022-05-13 09:31:58 -04:00
Arjan Onwezen
e97ffd42ef
Set fixed modulation (WFM) for Pocsag app.
2022-05-13 09:04:53 -04:00
Arjan Onwezen
cccc92cc34
Save most common settings for TX apps. And translated some French apps along the way.
2022-05-13 08:38:04 -04:00
Brumi-2021
de1570d8af
Allow change initial gain amp values just opened file ( #634 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc35384dd3007a4cc91c319b68d2b17232a8c.
* Revert "Update spectrum_collector.cpp"
This reverts commit 35cece1cb0b611aec2dcee474168798883da2819.
* Revert "Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax."
This reverts commit f4db4e2b535cd722ce0f5ee6cd8094d4ba717c4f.
* Allow initial GAIN ,AMP changes after opened file
2022-05-07 11:43:55 +12:00
Brumi-2021
1027e80d53
Recovered lost ctcss/roger beep/correct mic gain in mic app from 1.5.1 without ALC (Auto mic Limit Control-AK) ( #633 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc35384dd3007a4cc91c319b68d2b17232a8c.
* Revert "Update spectrum_collector.cpp"
This reverts commit 35cece1cb0b611aec2dcee474168798883da2819.
* Revert "Solving Compile error on gcc10 . Keeping same safety protection about the size of the array ,but with slightly different sintax."
This reverts commit f4db4e2b535cd722ce0f5ee6cd8094d4ba717c4f.
* Recovered CTCSS-Roger_beep-MIC-GAIN from 1.5.1
* Temporary removing ALC-( for AK4951 platorm)
2022-05-07 11:43:14 +12:00
TqMatvey
367cb318cd
Fix KeyFob (beta) being off-screen
2022-05-05 18:06:15 +07:00
jLynx
fe33c12111
Sound/white noise Clock fix ( #625 )
2022-05-05 08:31:54 +12:00
GullCode
5551c6a676
Fixing branch, moving block, adding quote
2022-05-04 10:29:12 +02:00
GullCode
2b7b0d028a
Merge branch 'touch_return_option' of github.com:GullCode/portapack-mayhem into touch_return_option
2022-05-03 14:42:40 +02:00
GullCode
7b42d9ec94
changed label to fit the screen
2022-05-03 14:34:55 +02:00
GullCode
0580a528e4
Merge branch 'next' into touch_return_option
2022-05-03 14:31:03 +02:00
GullCode
c75c4685cd
Added a ui_config flag to manage gui return icon status
2022-05-03 14:23:58 +02:00
Arjan Onwezen
799a473b36
Save individual app settings. Currently only for apps in Receive section and basic settings like, LNA, VGA, Rx Amp and Frequency.
2022-05-01 06:09:02 -04:00
Jimi Sanchez
2efab19bf6
Merge branch 'next' of https://github.com/jimilinuxguy/portapack-mayhem into next
2022-04-28 17:06:50 -04:00
Jimi Sanchez
4562228b55
Fixing spelling of Wav Viewer
2022-04-28 17:06:45 -04:00
Jimi Sanchez
6af0d4e751
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 17:03:24 -04:00
Jimi Sanchez
0fed174a80
Adding back wipe sd
2022-04-28 16:58:44 -04:00
Jimi Sanchez
d71c759480
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 13:55:44 -04:00
Jimi Sanchez
c1e568f62c
Removing wipe sd
2022-04-28 13:54:17 -04:00
Jimi Sanchez
f48980e381
Adding playlist to CMakeLists
2022-04-28 13:52:47 -04:00
Žiga Deisinger
ee9b4c89bd
Fix #494 - Change App Titles
...
I choose what I think are the best Titles based on existing titles/class names and so on. There were also inconsistencies between TX and Transmit and RX and receive. I renamed them to shorter version TX and RX also added it as suffix where possible to make it clearer in what mode you are in. If you have any other title suggestions or changes please use Add comment on Files Changed Screen so I can change it.
2022-04-26 23:09:24 +02:00
Erwin Ried
35ed394b37
Merge pull request #601 from GullCode/ais_app-warning-fix
...
Added missing contructors/operators/etc in ais_app
2022-04-22 09:59:01 +02:00
Erwin Ried
4c98cf16a1
Merge pull request #600 from GullCode/ui_qrcode-warning-fix
...
Fix for weffc++
2022-04-22 08:19:43 +02:00
GullCode
de042df7eb
Added missing initializer
2022-04-21 23:12:37 +02:00
GullCode
2fbf96425a
Added missing contructors/operators/etc in ais_app
2022-04-21 22:52:17 +02:00
GullCode
85d5a8fdba
Fix for weffc++
2022-04-21 22:27:20 +02:00
GullCode
c37df0c6fd
Fix for warning XXX should be initialized in the member initialization list
2022-04-19 17:23:30 +02:00
Erwin Ried
1537b1eccb
Merge pull request #589 from GullCode/qrcode-warning-fix
...
Qrcode warning fix
2022-04-18 23:29:08 +02:00
GullCode
5cdaac6b82
Fix uneeded negative test because type is uint ( warning: comparison is always false due to limited range of data type)
2022-04-18 22:33:10 +02:00
GullCode
17aa58bbf8
Changed pramga to comments to fix warning: ignoring #pragma mark [-Wunknown-pragmas]
2022-04-18 22:32:43 +02:00
jLynx
178528ef96
Fixed no audio issue v2 ( #567 )
...
* Fixed no audio issue v2 (#567 )
2022-04-12 09:28:36 +12:00
jLynx
5d9a2e560b
SD card backup storage ( #565 )
...
* Got SD card mounting during boot
* Cleaned up comments
* Now loads settings from SD as backup
* Now loads settings from SD as backup
* linting
* refactoring
2022-04-11 21:42:56 +12:00
Arjan Onwezen
8c1593fab9
Added cancel button in UI settings.
2022-04-08 17:50:21 -04:00
ArjanOnwezen
a9d2b2ff8a
Merge branch 'next' into feature/disableTouch
2022-04-08 16:10:55 +02:00
Arjan Onwezen
efdefa85be
Quick fix (as figures out by @bluegizmo83) to make sure WM8731S chips don't stay silent after pause in scanner app.
2022-04-08 09:51:41 -04:00
Arjan Onwezen
6697d2533c
Added support for LARGE qr code.
2022-04-08 08:38:32 -04:00
jLynx
9d5ed65f6b
Added the most random fix
2022-04-08 12:42:12 +12:00
jLynx
2ba74d0413
What did I change?
2022-04-08 12:31:06 +12:00
jLynx
59d08a4203
Enabled auto detection again
2022-04-07 21:30:37 +12:00
jLynx
51bc0f0100
Fixed broken radio offset
2022-04-07 21:22:47 +12:00
jLynx
2d3cb426ba
Stores in memory
2022-04-07 09:11:10 +12:00
jLynx
dd2fdecb21
removed commented lines
2022-04-07 08:48:00 +12:00
jLynx
a37ba1ee2b
2021/12 QFP100 fix
2022-04-07 08:41:46 +12:00
jLynx
0c0d47b0d2
Added persistent memory of save state
2022-04-06 13:28:10 +12:00
jLynx
50821bab55
Added button on boot detection
2022-04-06 08:16:57 +12:00
jLynx
796d9ca854
Updated comments
2022-04-05 14:44:32 +12:00
jLynx
fd8bc177ad
Added support for H2+
2022-04-05 14:41:12 +12:00
jLynx
f6c496d1d3
removed comments
2022-04-05 10:56:09 +12:00
jLynx
b4a6b958e5
Fixed R1_20150901 vs R2_20170522 boot & detection issues
2022-04-05 10:53:52 +12:00
jLynx
43e9ce4704
Fixed R1_20150901 vs R2_20170522 boot & detection issues
2022-04-05 10:52:42 +12:00
Jimi Sanchez
584c46af64
Initial commit of playlist app for replaying capture files sequentially
2022-04-03 19:38:06 -04:00
jLynx
9200db24be
WIP
2022-04-02 22:02:05 +13:00
jLynx
03057546e1
WIP
2022-04-02 22:00:46 +13:00
jLynx
3601545712
Updated to say 433 as it's not 434
2022-04-01 22:22:25 +13:00
eried
759c4d9d51
Contributors update
2022-03-29 08:28:31 +02:00
eried
77a0d255dd
Version bump
2022-03-29 08:15:44 +02:00
NotPike
7066f931a8
Update ui_record_view.cpp
...
cleanup
2022-03-29 01:16:16 -04:00
NotPike
aa2c5a4c84
Update analog_audio_app.hpp
...
Forgot to take that include out. >_<
2022-03-29 00:34:52 -04:00
notpike
d70e1a6fac
Added Datetime + Freq Filename to Audio App
2022-03-28 20:53:09 -07:00
Erwin Ried
a55e5d4fc0
Merge pull request #497 from Brumi-2021/Solving_mic_saturation_and_spectrum_armonics_Mic_App
...
Solving_mic_saturation_and_spectrum_harmonics_Mic_App
2022-03-28 10:10:08 +02:00
Erwin Ried
8da0dbe36b
Merge pull request #519 from notpike/replay_antenna_bias
...
Replay App Enable Bias-tee
2022-03-28 10:09:51 +02:00
Erwin Ried
8688ac0e05
Merge pull request #520 from ArjanOnwezen/add-country-info-to-ais-app
...
Added country to AIS app, so you know from which country a vessel is.
2022-03-28 10:08:39 +02:00
Erwin Ried
82732a3f73
Merge pull request #512 from jLynx/PSI
...
TPMS toggle between PSI and kPa (v1)
2022-03-28 10:07:41 +02:00
Arjan Onwezen
be0427889f
Added country to AIS app, so you know from which country a vessel is.
...
It's using the MID database, which is also part of the PR.
mids.db should be placed in /AIS folder on SD card.
2022-03-27 12:34:26 -04:00
NotPike
37a40cbeda
Delete ui_newapp.hpp
2022-03-27 00:40:45 -04:00
notpike
4ef98e2928
Added Bias Tee support for Replay and fixed file error logic bug
2022-03-26 21:20:55 -07:00
notpike
434c559861
Added Bias Tee support for Replay and fixed file error logic bug
2022-03-26 21:20:49 -07:00
jLynx
5c97c24b48
Added NZ to APRS
2022-03-24 20:36:39 +13:00
jLynx
4a8458d812
refactoring
2022-03-24 19:51:08 +13:00
jLynx
165efd7355
refactoring
2022-03-24 19:44:26 +13:00
jLynx
d1d1198b1b
refactoring
2022-03-24 19:43:26 +13:00
jLynx
0025ad2507
refactoring
2022-03-24 19:19:02 +13:00
jLynx
32f957cead
WIP updating header
2022-03-24 19:08:07 +13:00
jLynx
2030118d9f
WIP can now switch between kPa and PSI
2022-03-24 17:05:38 +13:00
jLynx
0523aabe91
WIP PSI selector
2022-03-24 16:10:55 +13:00
jLynx
1c81c7a8ba
Revert "Added NZ to APRS"
...
This reverts commit 9df1cfa670e103bc83536b96e1ceab5bdbc90fe5.
2022-03-23 21:32:32 +13:00
jLynx
9df1cfa670
Added NZ to APRS
2022-03-23 20:51:10 +13:00
Erwin Ried
8774ee0acd
Merge pull request #485 from ArjanOnwezen/centralize-database-functions
...
centralize-db-retrieval-functions
2022-03-18 22:05:09 +01:00
Brumi-2021
d5a1733c1c
Solving_mic_saturation_and_spectrum_armonics_Mic_App
2022-03-05 21:39:53 +01:00
notpike
e00d91e1d2
Added return codes for delete_file() and rename_file() for file.hpp
2022-02-01 10:37:38 -08:00
Erwin Ried
459b8efc52
Merge pull request #487 from Brumi-2021/Add_Gain_TX_control_to_GPS_Simulator_issue#480
...
Add_Gain_TX_to_GPS_sim_App_issue_480
2022-01-31 09:43:20 +01:00
Erwin Ried
db3f645131
Merge pull request #489 from Brumi-2021/“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
...
“antenna dc bias missing in ais and radiosonde”
2022-01-31 09:41:11 +01:00
Brumi-2021
b84820963b
Revert "Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”""
...
This reverts commit 4de25a20391906e94cf8d24763b77c846da682f5.
2022-01-30 11:37:46 +01:00
Brumi-2021
4de25a2039
Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”"
...
This reverts commit 4a57af64ce2a11d539b317637325ed78fdb75aa7.
2022-01-30 10:58:43 +01:00
Brumi-2021
a11b9c492f
Add_Gain_TX_to_GPS_sim_App_issue_480
...
Add Gain control to the GPS Sim App .
(we are clonning the two previous PR's n #395 and #446 of the Replay App, correcting TX Gain control to this GPS Sim App )
2022-01-29 23:29:17 +01:00
Arjan Onwezen
867539ce9c
centralize-db-retrieval-functions
2022-01-28 10:24:49 -05:00
Žiga Deisinger
cebbc12084
Enable / Disable Touchscreen #481
...
This commit will reverse the logic of touch screen as suggested by @ArjanOnwezen
2022-01-27 14:23:22 +01:00
Žiga Deisinger
4a0d42ed34
Add code for feature "Disable Touch"
2022-01-26 21:52:08 +01:00
Michał Borsuk
0d5af740a5
correction of spelling of units
2022-01-26 18:08:56 +01:00
Žiga Deisinger
96879d3664
Add code for feature "Disable Touch"
2022-01-26 14:53:31 +01:00
Žiga Deisinger
7af7279ea4
Fix ADS-B not updating Altitude in Map #473
...
This commit will fix altitude not automatically updating when in Map mode. Also set default altitude for AIS to 0.
2022-01-23 22:34:01 +01:00
Arjan Onwezen
dcb67049af
Prepadded MMSI in AIS app with zeros, so it's always 9 chars long as in the specs.
2022-01-16 05:06:53 -05:00
Brumi-2021
4a57af64ce
“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
2022-01-15 23:09:42 +01:00
Erwin Ried
30449e0adf
Merge pull request #467 from ArjanOnwezen/gui-glitch-in-adsb-rx
...
Small GUI glitch in ADSB RX
2022-01-12 19:06:14 +01:00
Arjan Onwezen
c9a813fbd6
GUI glitch in ADSB RX
2022-01-12 10:31:59 -05:00
