furrtek
d3222c27ca
Started working on radiosonde RX
...
Removed some warnings
Better handling of absent map file in GeoMap ?
2017-10-05 05:38:45 +01:00
furrtek
73d47cd77d
Added remaining buttons for TouchTunes remote
...
LCR transmit UI cleanup
CC1101 data whitening function
Uniformized tx progress message handling
2017-09-24 20:05:42 +01:00
furrtek
26949773bb
Added TouchTunes remote
2017-09-23 12:02:32 +01:00
furrtek
9acfdcbd41
Added function setting in POCSAG TX
...
POCSAG TX: Max message length is now 30 (was 16 for no reason)
2017-09-23 04:53:42 +01:00
furrtek
a6d2b766f4
Fixed EPAR transmit
2017-09-21 09:18:17 +01:00
furrtek
c0f51c2690
Date and time display widget
...
Disabled handwriting text input (not that useful for now)
Bugfix: Trim long filenames in fileman
Slight cleanup of 7-seg display widget
2017-09-20 07:50:59 +01:00
furrtek
950bc2b1d2
AFSK RX works (only Bell202 for now)
...
AFSK RX always logs to file
Removed frequency and bw settings from modem setup view
Updated binary
Bugfix: Binary display shifted one bit
Bugfix: Frequency manager views freezing if SD card not present
Bugfix: Menuview blinking arrow not showing up at the right position
Bugfix: Freeze if console written to while it's hidden
Broken: LCR TX, needs UI update
2017-09-02 08:28:29 +01:00
furrtek
42439d1885
Started writing (copying...) AFSK RX
...
Encoders: removed bit duration setting (frame duration is more useful)
2017-08-29 09:42:04 +01:00
furrtek
3aae333974
ADSB RX text color bugfix
...
ADSB RX entries now "age" after 10 and 20 seconds
2017-08-27 21:03:17 +01:00
furrtek
2628f9c03d
ADSB position decoding
...
Date and time string format function
Binary update
2017-08-17 12:56:47 +01:00
furrtek
9d902bc224
ADSB RX now works \o/
...
Added tabs in RDS TX, multiple groups can be sent at once
Bugfix: text not updating on UI after text prompt
2017-08-16 10:02:57 +01:00
furrtek
7f97a090e4
Fixed ADSB TX frame rotation
2017-08-12 09:54:58 +01:00
furrtek
e5fef6bb89
Added tabs to BHT TX and Jammer
...
Updated firmware binary
2017-08-12 00:27:05 +01:00
Jared Boone
f726a54f25
Fix whitespace to match furrtek/portapack-havoc.
2017-08-09 17:08:30 -07:00
Jared Boone
39617f38bf
TPMS: Remove unused variable.
...
May use again, so commented out.
2017-08-08 10:36:17 -07:00
Jared Boone
58e0432b56
I2S: Enable input buffer on SCK for LPC43xx slave mode.
2017-08-06 12:44:27 -07:00
Jared Boone
ac423ee769
Audio: Add codec config methods for external I2S master.
2017-08-06 12:43:39 -07:00
Jared Boone
6c3a1384fb
WM8731: Extract interface configuration method.
2017-08-06 12:08:12 -07:00
Jared Boone
f0947a4917
AK4951: Separate/rename codec interface mode config methods.
2017-08-06 12:02:38 -07:00
Jared Boone
49252dc1bc
LPC43xx: Add CREG6 struct definition. Add I2S CREG6 configuration.
2017-08-06 11:16:57 -07:00
furrtek
fba5b507ad
Made a GeoPos widget for lon/lat/alt entry and display (APRS...)
...
Cleaned up the GeoMap view, can be used as input
2017-08-03 19:06:59 +01:00
furrtek
a5f0f72ea1
Split ADSB TX into tabs
...
Simplified TabView a lot
2017-07-30 14:46:42 +01:00
furrtek
89a3afcd74
Started writing TabView
...
Loopable NumberField
2017-07-30 09:39:01 +01:00
furrtek
0cbf9cd386
Added velocity/bearing ADS-B frame for tx
...
Added compass widget
Manchester encoder
2017-07-25 08:30:12 +01:00
furrtek
c2a9ed7d9b
Merge remote-tracking branch 'upstream/master'
2017-07-25 00:20:57 +01:00
furrtek
5a67a7080a
ADS-B TX works well enough for dump1090 and gr-air-modes
...
Hooked ADS-B RX to baseband instead of debug IQ file, not tested
2017-07-23 12:20:32 +01:00
Jared Boone
e9895c1b11
IO: Enable input buffer on LCD_WRX.
...
Just for consistency. Other LCD interface pin states are read during interrupt.
2017-07-20 16:37:48 -07:00
Jared Boone
751ae92509
CPLD: Switch sense of LCD_RD/WR pins.
...
Should keep CPLD settled when in HackRF mode.
2017-07-20 16:33:55 -07:00
Jared Boone
aa189a3462
Backlight: Add abstraction for support of different hardware.
2017-07-18 21:29:32 -07:00
Jared Boone
1eb561ab45
LCD: Rename lcd_write_data_fast to lcd_write_data.
...
It's the only LCD write function!
2017-07-18 13:27:15 -07:00
Jared Boone
aa66c0b7f7
LCD: Consolidate read functions.
...
Faster function consumed by slower function, because faster function was failing during testing.
2017-07-18 13:23:16 -07:00
Jared Boone
2064689d46
IO: Remove out-of-date comment.
2017-07-18 13:17:10 -07:00
Jared Boone
030a0bcb0c
IO: Add LCD write function for C arrays.
2017-07-18 13:16:41 -07:00
Jared Boone
bb194825ae
ILI9341: Refactor sleep on/off, display on/off functions.
2017-07-18 13:13:13 -07:00
furrtek
58f113d153
"CW generator" and "Whistle" merged in "Signal generator"
...
Added wave shape selection and tone frequency auto-update
Converted color icons to B&W
2017-07-18 19:31:05 +01:00
Jared Boone
23c340abb2
MAX V: Add shift_dr() for testing.
2017-07-18 10:53:43 -07:00
Jared Boone
963579d82a
AK4951: Adjust initial microphone gain.
2017-07-18 10:53:08 -07:00
Jared Boone
62b1a82b6b
Doc: Fix incorrect comment about MCU->CPLD pin functions.
2017-07-17 16:41:02 -07:00
Jared Boone
1b9a569022
SDC: Adjust clock/data timing and output drive to match SD specs, measurements.
2017-07-17 16:38:31 -07:00
furrtek
33a2df9d2a
OutputStream (file M0 -> M4 radio) now works
...
Disabled numbers station for now (too buggy, low priority)
2017-06-23 08:40:22 +01:00
furrtek
abd154b3c7
Merge remote-tracking branch 'upstream/master'
...
Base class for text entry
2017-06-21 03:25:27 +01:00
Jared Boone
47cc88d1e1
ILI9341: Tidy scroll types, use height().
2017-06-19 16:31:54 -07:00
furrtek
e2f0a03460
Using new CPLD data (fixes spectrum mirroring)
...
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
Jared Boone
dec4e41189
CPLD: Organize CPLD code into namespaces.
...
Use type aliases to hide actual CPLD type (somewhat).
2017-06-02 21:57:13 -07:00
Jared Boone
dd0c009e6f
CPLD: Stop generating HackRF CPLD .hpp file.
2017-06-02 21:55:35 -07:00
Jared Boone
3d06941129
Move CPLD filres to common/
...
...for imminent refactoring.
2017-06-02 17:13:41 -07:00
Jared Boone
a3483a8394
CPLD: Introduce Config type to clean up programming interface.
...
Hide the details of how the CPLD data is stored.
2017-06-02 16:54:24 -07:00
Jared Boone
797e63a590
CPLD: Use correct bitstream for updating hardware.
...
Determine hardware version and use one of two CPLD bitstream files.
2017-05-31 22:28:07 -07:00
Jared Boone
600dcb734e
AK4951: Initial commit.
2017-05-31 11:45:54 -07:00
Jared Boone
bec626e29f
WM8731: Add Codec abstraction.
2017-05-31 11:42:12 -07:00
Jared Boone
37c058354e
WM8731: Add method to detect codec is present.
...
Used to determine PortaPack hardware version.
2017-05-31 11:34:16 -07:00
Jared Boone
8f5555b052
WM8731: Store headphone volume for mute() function.
...
So when unmuted, previous volume can be restored.
2017-05-31 11:32:32 -07:00
Jared Boone
f6e1e78e8a
WM8731: Return bool from reset() and low-level write()s.
2017-05-31 11:28:00 -07:00
Jared Boone
b3ee884f16
I2S RX: Set RX SDA pin to correct SCUMUX mode.
...
It's left in GPIO mode ordinarily, because of CPLD programming earlier in boot-up.
2017-05-26 16:50:34 -07:00
Jared Boone
556085b3e3
I2S: Enable TX_WS output pin's input buffer.
...
This permits receipt of TX_WS as RX_WS for the receive side of the I2S peripheral, and was why I got no RX samples when testing microphone input.
2017-05-22 14:20:49 -07:00
furrtek
a35d9ee8a9
Missing image files
2017-05-18 21:56:55 +01:00
furrtek
38e14b1e30
Scanner: Added last locked frequencies list
...
Added back squelch to NFM receiver
Scanner: cleanup
Widgets: VU-meter cleanup
2017-05-18 11:06:11 +01:00
Jared Boone
dd0048db8d
Remove broken simd32_t type.
2017-05-03 09:58:07 +01:00
Jared Boone
19e42196db
Fn for control of audio codec reset signal.
2017-05-01 10:37:49 +01:00
Jared Boone
b12f90ef08
Adjust initial CPLD io_reg value for new CPLD code.
2017-05-01 10:34:33 +01:00
furrtek
8c680ff893
Simplified LCR code a bit
...
Split modem into modem and serializer
Frequency string formatter
2017-04-24 18:15:57 +01:00
furrtek
90feadd9f5
POCSAG RX saves ignored address
...
Made AFSK code more generic (not tied to LCR)
Added modem presets and more options in AFSK setup
String-ized and simplified LCR UI code
Simplified AFSK baseband code, made to always work on 16bit words
2017-04-21 06:22:31 +01:00
furrtek
eff96276c3
Made back button always focusable with left key
2017-04-21 00:31:21 +01:00
furrtek
40b49e2072
POCSAG address filter now ignores alpha messages
...
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
3a1e5b8772
Added address filter in POCSAG RX
...
Changed POCSAG log format
Console widget knows red, green and blue now
2017-04-18 21:29:55 +01:00
furrtek
fbc054ca75
Coaster pager address scan
...
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
685e4c6e4b
Added more SSTV modes
...
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
furrtek
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
furrtek
5b74b83458
Bitmap preview in SSTV TX
2017-03-22 18:21:31 +00:00
furrtek
089eeeafe4
Tones bugfix, numbers station voice files search
2017-03-22 03:21:06 +00:00
furrtek
16acb9db28
Added roger beep option in mic TX
2017-03-14 08:20:13 +00:00
furrtek
37cfcd392d
Added DCS parity table and generator tool
2017-03-14 07:24:04 +00:00
furrtek
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
2d75722b74
Added microphone TX (very basic for now)
2017-03-12 07:10:09 +00:00
furrtek
446efa8fc0
Reduced audio tx FIFO refill size
...
Last received POCSAG address is auto loaded in POCSAG tx
2017-03-05 15:37:56 +00:00
furrtek
2022fe137c
Morse TX bugfix: bad CW symbols, FM not stopping
...
Corrected fox hunt transmitter #s
Moved widgets a bit
Setting up proc_tones with 0 message length stops it
2017-03-03 08:06:11 +00:00
furrtek
0ba05fea5e
Morse special chars and tx duration indication
2017-02-15 04:27:51 +00:00
furrtek
0642c57041
Utility: CW generator
2017-02-15 03:05:38 +00:00
furrtek
6c86ad1b72
Morse TX foxhunt codes are working
2017-02-13 23:24:42 +00:00
furrtek
4e8980e5d8
Finished jammer modes
...
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
furrtek
d12cd0d8af
"Labels" widget
2017-02-12 07:23:31 +00:00
furrtek
0102a34286
Reverted WFM mode to working state
...
TXView in ADSB TX
Lockable TXView
POCSAG TX bugfix with Alphanum and Numeric only
Testing Labels widget
2017-02-12 04:05:21 +00:00
furrtek
21de81bb85
POCSAG TX: Support for numeric only and address only messages
2017-02-08 01:19:29 +00:00
furrtek
fc8279aa30
POCSAG TX text and bitrate can be changed
...
Modal view message can be multiline now
2017-02-07 19:54:18 +00:00
furrtek
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
furrtek
24abe4b427
Yet another POCSAG bugfix (multi-batch messages are not cut anymore)
...
Added BCH ECC functions for checking, error correction and encoding
2017-02-06 20:32:33 +00:00
furrtek
98f89a84bb
Improved POCSAG receiver reliability
2017-02-05 20:57:20 +00:00
furrtek
607e6c5bd4
CTCSS in soundboard. 24 jammer chs instead of 9.
...
Soundboard random mode now cares about loop option.
Started documenting UI.
2017-02-02 09:29:14 +00:00
furrtek
8662ed4024
Close Call should be more accurate
...
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
furrtek
064e097bc3
Symfield widget auto-inits
...
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
0642d633c3
Frequency manager empty file bugfix
2017-01-30 01:09:00 +00:00
furrtek
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e
Udpdated jammer baseband code, should work again
2017-01-17 08:42:35 +00:00
furrtek
368f0f7fb0
Digital mode for waveform widget, 2.4GHZ WLAN channels in jammer
2017-01-17 07:00:42 +00:00
furrtek
b10c88e271
POCSAG bitrate selection and logging toggle
...
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
e4abcea9a3
Added bitrate option for POCSAG baseband, PWMRSSI frequency option
...
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc
Merge 'upstream/master' - At least it builds...
2017-01-16 03:45:44 +00:00
furrtek
12aeae3a82
Commit replay stuff before sync
2017-01-10 19:45:40 +00:00
furrtek
3ec725c172
Added SD card wiper tool
...
Frequency manager now creates FREQMAN.TXT if not found
Moved graphics files
2017-01-10 18:40:33 +00:00
furrtek
a0c248d567
Added waveform widget and a frequency field in encoders tx
2017-01-09 02:45:29 +00:00
