GullCode
0d18aa47f3
Added Recon files to CMake list
2022-09-13 23:58:03 +02:00
GullCode
cf40f5eb14
Added ButtonWithEncoder
2022-09-13 23:58:03 +02:00
GullCode
fe4bc7902f
Added access to min/med/max values
2022-09-13 23:58:03 +02:00
GullCode
5d5865eefb
Added tone to string and string to tone
2022-09-13 23:58:03 +02:00
GullCode
a7370ee95d
Added new file format funcs
2022-09-13 23:58:03 +02:00
GullCode
223cd7c20d
added Recon files
2022-09-13 23:58:03 +02:00
Erwin Ried
1be3167748
Merge pull request #710 from Brumi-2021/Increase_freq_step_resolution
...
Very minor change , add 10 & 50Hz freq. steps , SSB in HF and Qo-100_sat_#669
2022-09-12 09:24:25 +02:00
Brumi-2021
1bbd889005
Very minor change , add 10/50Hz freq. step #669
2022-09-06 21:01:09 +02:00
Erwin Ried
d87e9853a1
Merge pull request #705 from Brumi-2021/Bias_DC_Voltage_not_working_in_TPMS_&_ERT_#700
...
Adding Bias dc voltage not working in tpms & ert (previous issue #700 )
2022-09-05 10:14:47 +02:00
Brumi-2021
6087c658e9
Applied ghost-signal c/m to all remaining TX Apps
2022-08-27 17:47:24 +02:00
Brumi-2021
08a108d3e4
First test, ghost-singal c/m to only Mic_App
2022-08-26 18:34:30 +02:00
Brumi-2021
5021a03572
Minor change radio,disable-->receiver.disable
2022-08-23 00:04:48 +02:00
Brumi-2021
961a4c4588
Addition_bias_DC_ERP_TPMS
2022-08-21 19:59:15 +02:00
Arne Luehrs
a89d418202
AIS Decoding, destination text display fix
...
Remove trailing null characters '@' from display of destination field
2022-08-15 14:41:07 +08:00
Arne Luehrs
1e14ca4df1
Enable AIS-B decoding and display
...
Implement decoding for AIS messages 18 and 24A 24B
clean up display of text messages by removing the trailing null
character '@'
2022-08-15 13:56:40 +08:00
Arne Luehrs
5096f91986
Add AIS Class B Decoding
2022-08-15 00:12:24 +08:00
andrej
87418703e0
Make clk and frame duration steps in OOK configurable
2022-08-01 08:40:26 +02:00
andrej
e33c98cbc7
Increase maximum OOK clock to 1000 kHz
2022-08-01 08:40:16 +02:00
Timo Taskinen
50bd08d9ff
Fix AM bandwidth and sampling rate in scanner ( #671 )
...
In scanner app, the bandwidth and sampling rate for AM modulation was incorrect. This resulted in high pitched and distorted sound. I have now copied the settings from the Audio receiver app, and now the sound in Scanner sounds good also in AM mode.
2022-06-07 11:05:17 +12:00
jLynx
39134b62c3
Fix for new H2+ devices ( #666 )
...
* WIP Fix for new h2+ devices
* reset
* Updated sub module
2022-06-05 14:15:44 +12:00
Jared Boone
e5a30b4309
Persistent memory check value verification, defaulting when fails. ( #662 )
...
* Make default constructor for touch calibration
* Add persistent memory check value and access abstraction.
* Add persistent data_t default constructor with reasonable defaults.
* serial_format_t default constructor.
* Tidy up backlight timeout type.
* Add persistent data struct version/checking.
* Make range_t functions constexpr.
* Move ui_config and functions into class.
* Add backlight_config_t struct, separate enable and time settings.
2022-05-29 08:55:18 +12:00
Brumi-2021
379ad6dbf0
Recovered_ALC_Mic_Feature_AK4953_OK_WM8731
2022-05-28 22:29:10 +02:00
ArjanOnwezen
a3ee160e27
Merge pull request #643 from ArjanOnwezen/save-more-app-settings
...
Save most common settings for TX apps
2022-05-13 21:42:51 +02:00
Arjan Onwezen
ade0d6c68f
French translations.
2022-05-13 09:31:58 -04:00
Arjan Onwezen
e97ffd42ef
Set fixed modulation (WFM) for Pocsag app.
2022-05-13 09:04:53 -04:00
Arjan Onwezen
cccc92cc34
Save most common settings for TX apps. And translated some French apps along the way.
2022-05-13 08:38:04 -04:00
MattLodge
6c5f8a38e0
Update generate_world_map.bin.py ( #640 )
...
Use bytes instead of strings to write ADSB map binary for python3
2022-05-09 07:27:15 +12:00
Brumi-2021
de1570d8af
Allow change initial gain amp values just opened file ( #634 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc3538435cece1cb0f4db4e2b53
2022-05-07 11:43:55 +12:00
Brumi-2021
1027e80d53
Recovered lost ctcss/roger beep/correct mic gain in mic app from 1.5.1 without ALC (Auto mic Limit Control-AK) ( #633 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc3538435cece1cb0f4db4e2b53
2022-05-07 11:43:14 +12:00
TqMatvey
367cb318cd
Fix KeyFob (beta) being off-screen
2022-05-05 18:06:15 +07:00
jLynx
fe33c12111
Sound/white noise Clock fix ( #625 )
2022-05-05 08:31:54 +12:00
GullCode
5551c6a676
Fixing branch, moving block, adding quote
2022-05-04 10:29:12 +02:00
GullCode
2b7b0d028a
Merge branch 'touch_return_option' of github.com:GullCode/portapack-mayhem into touch_return_option
2022-05-03 14:42:40 +02:00
GullCode
7b42d9ec94
changed label to fit the screen
2022-05-03 14:34:55 +02:00
GullCode
0580a528e4
Merge branch 'next' into touch_return_option
2022-05-03 14:31:03 +02:00
GullCode
c75c4685cd
Added a ui_config flag to manage gui return icon status
2022-05-03 14:23:58 +02:00
Arjan Onwezen
799a473b36
Save individual app settings. Currently only for apps in Receive section and basic settings like, LNA, VGA, Rx Amp and Frequency.
2022-05-01 06:09:02 -04:00
Jimi Sanchez
2efab19bf6
Merge branch 'next' of https://github.com/jimilinuxguy/portapack-mayhem into next
2022-04-28 17:06:50 -04:00
Jimi Sanchez
4562228b55
Fixing spelling of Wav Viewer
2022-04-28 17:06:45 -04:00
Jimi Sanchez
6af0d4e751
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 17:03:24 -04:00
Jimi Sanchez
0fed174a80
Adding back wipe sd
2022-04-28 16:58:44 -04:00
Jimi Sanchez
d71c759480
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 13:55:44 -04:00
Jimi Sanchez
c1e568f62c
Removing wipe sd
2022-04-28 13:54:17 -04:00
Jimi Sanchez
f48980e381
Adding playlist to CMakeLists
2022-04-28 13:52:47 -04:00
Žiga Deisinger
ee9b4c89bd
Fix #494 - Change App Titles
...
I choose what I think are the best Titles based on existing titles/class names and so on. There were also inconsistencies between TX and Transmit and RX and receive. I renamed them to shorter version TX and RX also added it as suffix where possible to make it clearer in what mode you are in. If you have any other title suggestions or changes please use Add comment on Files Changed Screen so I can change it.
2022-04-26 23:09:24 +02:00
Erwin Ried
a91bbe6a2e
Merge pull request #596 from GullCode/proc-adsbrx-warning-fix
...
Fix for warning: comparison of integer expressions of different signedness
2022-04-22 10:00:05 +02:00
Erwin Ried
a5a9bc85f8
Merge pull request #597 from GullCode/proc-aprsrx-warning-fix
...
Fix for proc_aprsrx and aprs_packet warnings, they are related
2022-04-22 09:59:31 +02:00
Erwin Ried
b23addd452
Merge pull request #598 from GullCode/tpms-warning-fix
...
Fix for warning: narrowing conversion
2022-04-22 09:59:21 +02:00
Erwin Ried
6467e5e7e6
Merge pull request #599 from GullCode/proc_mictx-warning-fix
...
Fix for warning: 'MicTXProcessor::modulator' should be initialized
2022-04-22 09:59:08 +02:00
Erwin Ried
35ed394b37
Merge pull request #601 from GullCode/ais_app-warning-fix
...
Added missing contructors/operators/etc in ais_app
2022-04-22 09:59:01 +02:00
Erwin Ried
4c98cf16a1
Merge pull request #600 from GullCode/ui_qrcode-warning-fix
...
Fix for weffc++
2022-04-22 08:19:43 +02:00
Erwin Ried
18be6750e5
Merge pull request #602 from GullCode/ui_adsb_rx-warning-fix
...
Added missing initializer
2022-04-22 08:19:03 +02:00
GullCode
3fa190324b
Fix warning for proc_pocsag
2022-04-21 23:25:58 +02:00
GullCode
de042df7eb
Added missing initializer
2022-04-21 23:12:37 +02:00
GullCode
2fbf96425a
Added missing contructors/operators/etc in ais_app
2022-04-21 22:52:17 +02:00
GullCode
85d5a8fdba
Fix for weffc++
2022-04-21 22:27:20 +02:00
GullCode
f13d1f8b9c
Fix for warning: 'MicTXProcessor::modulator' should be initialized
2022-04-21 21:46:55 +02:00
GullCode
f804d7997c
Fix for warning: narrowing conversion
2022-04-21 21:41:02 +02:00
GullCode
2108ea53fa
Fix for proc_aprsrx and aprs_packet warnings, they are related
2022-04-21 17:38:49 +02:00
GullCode
90d38af705
Fix for warning: comparison of integer expressions of different signedness
2022-04-21 17:29:42 +02:00
GullCode
c37df0c6fd
Fix for warning XXX should be initialized in the member initialization list
2022-04-19 17:23:30 +02:00
Erwin Ried
cdba4fa5bf
Merge pull request #590 from GullCode/a-packet-warning-fix
...
Fixed warning: comparison of integer expressions of different signedness
2022-04-18 23:29:41 +02:00
Erwin Ried
1537b1eccb
Merge pull request #589 from GullCode/qrcode-warning-fix
...
Qrcode warning fix
2022-04-18 23:29:08 +02:00
GullCode
048b254354
Fixed uninitialized class members
2022-04-18 22:45:16 +02:00
GullCode
4b87a8a7dd
Fixed warning: comparison of integer expressions of different signedness
2022-04-18 22:38:29 +02:00
GullCode
5cdaac6b82
Fix uneeded negative test because type is uint ( warning: comparison is always false due to limited range of data type)
2022-04-18 22:33:10 +02:00
GullCode
17aa58bbf8
Changed pramga to comments to fix warning: ignoring #pragma mark [-Wunknown-pragmas]
2022-04-18 22:32:43 +02:00
notpike
0e9c7448c0
Added GRC C16 to complex script
2022-04-17 11:05:20 -07:00
jLynx
178528ef96
Fixed no audio issue v2 ( #567 )
...
* Fixed no audio issue v2 (#567 )
2022-04-12 09:28:36 +12:00
jLynx
5d9a2e560b
SD card backup storage ( #565 )
...
* Got SD card mounting during boot
* Cleaned up comments
* Now loads settings from SD as backup
* Now loads settings from SD as backup
* linting
* refactoring
2022-04-11 21:42:56 +12:00
Arjan Onwezen
8c1593fab9
Added cancel button in UI settings.
2022-04-08 17:50:21 -04:00
ArjanOnwezen
a9d2b2ff8a
Merge branch 'next' into feature/disableTouch
2022-04-08 16:10:55 +02:00
Arjan Onwezen
efdefa85be
Quick fix (as figures out by @bluegizmo83) to make sure WM8731S chips don't stay silent after pause in scanner app.
2022-04-08 09:51:41 -04:00
Arjan Onwezen
6697d2533c
Added support for LARGE qr code.
2022-04-08 08:38:32 -04:00
jLynx
9d5ed65f6b
Added the most random fix
2022-04-08 12:42:12 +12:00
jLynx
2ba74d0413
What did I change?
2022-04-08 12:31:06 +12:00
jLynx
59d08a4203
Enabled auto detection again
2022-04-07 21:30:37 +12:00
jLynx
51bc0f0100
Fixed broken radio offset
2022-04-07 21:22:47 +12:00
jLynx
2d3cb426ba
Stores in memory
2022-04-07 09:11:10 +12:00
jLynx
dd2fdecb21
removed commented lines
2022-04-07 08:48:00 +12:00
jLynx
a37ba1ee2b
2021/12 QFP100 fix
2022-04-07 08:41:46 +12:00
jLynx
0c0d47b0d2
Added persistent memory of save state
2022-04-06 13:28:10 +12:00
jLynx
50821bab55
Added button on boot detection
2022-04-06 08:16:57 +12:00
jLynx
796d9ca854
Updated comments
2022-04-05 14:44:32 +12:00
jLynx
fd8bc177ad
Added support for H2+
2022-04-05 14:41:12 +12:00
jLynx
f6c496d1d3
removed comments
2022-04-05 10:56:09 +12:00
jLynx
b4a6b958e5
Fixed R1_20150901 vs R2_20170522 boot & detection issues
2022-04-05 10:53:52 +12:00
jLynx
43e9ce4704
Fixed R1_20150901 vs R2_20170522 boot & detection issues
2022-04-05 10:52:42 +12:00
Jimi Sanchez
584c46af64
Initial commit of playlist app for replaying capture files sequentially
2022-04-03 19:38:06 -04:00
jLynx
9200db24be
WIP
2022-04-02 22:02:05 +13:00
jLynx
03057546e1
WIP
2022-04-02 22:00:46 +13:00
ArjanOnwezen
eec4cd8778
Delete icao24.db
...
delete duplicated icao24.db, since it should only be placed in /sdcard/ASDB folder
2022-04-01 14:02:03 +02:00
ArjanOnwezen
d7a795b8f2
Delete mids.db
...
delete duplicate mids.db, since it should only be placed in /sdcard/AIS folder
2022-04-01 14:00:57 +02:00
jLynx
3601545712
Updated to say 433 as it's not 434
2022-04-01 22:22:25 +13:00
eried
759c4d9d51
Contributors update
2022-03-29 08:28:31 +02:00
eried
77a0d255dd
Version bump
2022-03-29 08:15:44 +02:00
NotPike
7066f931a8
Update ui_record_view.cpp
...
cleanup
2022-03-29 01:16:16 -04:00
NotPike
aa2c5a4c84
Update analog_audio_app.hpp
...
Forgot to take that include out. >_<
2022-03-29 00:34:52 -04:00
notpike
d70e1a6fac
Added Datetime + Freq Filename to Audio App
2022-03-28 20:53:09 -07:00
Erwin Ried
477e6d65df
Merge pull request #488 from ArjanOnwezen/improve-screen-navigation
...
Improvements to screen navigation
2022-03-28 10:10:46 +02:00
Erwin Ried
a55e5d4fc0
Merge pull request #497 from Brumi-2021/Solving_mic_saturation_and_spectrum_armonics_Mic_App
...
Solving_mic_saturation_and_spectrum_harmonics_Mic_App
2022-03-28 10:10:08 +02:00
Erwin Ried
8da0dbe36b
Merge pull request #519 from notpike/replay_antenna_bias
...
Replay App Enable Bias-tee
2022-03-28 10:09:51 +02:00
Erwin Ried
8688ac0e05
Merge pull request #520 from ArjanOnwezen/add-country-info-to-ais-app
...
Added country to AIS app, so you know from which country a vessel is.
2022-03-28 10:08:39 +02:00
Erwin Ried
82732a3f73
Merge pull request #512 from jLynx/PSI
...
TPMS toggle between PSI and kPa (v1)
2022-03-28 10:07:41 +02:00
Arjan Onwezen
be0427889f
Added country to AIS app, so you know from which country a vessel is.
...
It's using the MID database, which is also part of the PR.
mids.db should be placed in /AIS folder on SD card.
2022-03-27 12:34:26 -04:00
NotPike
37a40cbeda
Delete ui_newapp.hpp
2022-03-27 00:40:45 -04:00
notpike
4ef98e2928
Added Bias Tee support for Replay and fixed file error logic bug
2022-03-26 21:20:55 -07:00
notpike
434c559861
Added Bias Tee support for Replay and fixed file error logic bug
2022-03-26 21:20:49 -07:00
Erwin Ried
3cb3c95349
Merge pull request #516 from ArjanOnwezen/updated-airlines.db
...
updated airlines.db
2022-03-25 15:44:32 +01:00
Erwin Ried
979b5126a6
Merge pull request #517 from ArjanOnwezen/updated-icao24.db
...
updated icao24.db
2022-03-25 15:43:56 +01:00
Arjan Onwezen
8e3fa0b9ea
updated icao24.db
2022-03-25 10:18:22 -04:00
Arjan Onwezen
00b43299ad
updated airlines.db
2022-03-25 08:47:47 -04:00
jLynx
5c97c24b48
Added NZ to APRS
2022-03-24 20:36:39 +13:00
jLynx
4a8458d812
refactoring
2022-03-24 19:51:08 +13:00
jLynx
165efd7355
refactoring
2022-03-24 19:44:26 +13:00
jLynx
d1d1198b1b
refactoring
2022-03-24 19:43:26 +13:00
jLynx
0025ad2507
refactoring
2022-03-24 19:19:02 +13:00
jLynx
32f957cead
WIP updating header
2022-03-24 19:08:07 +13:00
jLynx
2030118d9f
WIP can now switch between kPa and PSI
2022-03-24 17:05:38 +13:00
jLynx
0523aabe91
WIP PSI selector
2022-03-24 16:10:55 +13:00
jLynx
1c81c7a8ba
Revert "Added NZ to APRS"
...
This reverts commit 9df1cfa670
2022-03-23 21:32:32 +13:00
jLynx
9df1cfa670
Added NZ to APRS
2022-03-23 20:51:10 +13:00
Arjan Onwezen
d9c1b6b61f
Added consecutive id's in message.hpp, as mentioned in #484 .
2022-03-20 13:38:53 -04:00
Erwin Ried
8774ee0acd
Merge pull request #485 from ArjanOnwezen/centralize-database-functions
...
centralize-db-retrieval-functions
2022-03-18 22:05:09 +01:00
Brumi-2021
d5a1733c1c
Solving_mic_saturation_and_spectrum_armonics_Mic_App
2022-03-05 21:39:53 +01:00
notpike
e00d91e1d2
Added return codes for delete_file() and rename_file() for file.hpp
2022-02-01 10:37:38 -08:00
Erwin Ried
459b8efc52
Merge pull request #487 from Brumi-2021/Add_Gain_TX_control_to_GPS_Simulator_issue#480
...
Add_Gain_TX_to_GPS_sim_App_issue_480
2022-01-31 09:43:20 +01:00
Erwin Ried
db3f645131
Merge pull request #489 from Brumi-2021/“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
...
“antenna dc bias missing in ais and radiosonde”
2022-01-31 09:41:11 +01:00
Brumi-2021
b84820963b
Revert "Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”""
...
This reverts commit 4de25a2039
2022-01-30 11:37:46 +01:00
Arjan Onwezen
ec23dd8edf
some improvements to screen navigation
2022-01-30 05:12:46 -05:00
Brumi-2021
4de25a2039
Revert "“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”"
...
This reverts commit 4a57af64ce
2022-01-30 10:58:43 +01:00
Brumi-2021
a11b9c492f
Add_Gain_TX_to_GPS_sim_App_issue_480
...
Add Gain control to the GPS Sim App .
(we are clonning the two previous PR's n #395 and #446 of the Replay App, correcting TX Gain control to this GPS Sim App )
2022-01-29 23:29:17 +01:00
Arjan Onwezen
867539ce9c
centralize-db-retrieval-functions
2022-01-28 10:24:49 -05:00
Žiga Deisinger
cebbc12084
Enable / Disable Touchscreen #481
...
This commit will reverse the logic of touch screen as suggested by @ArjanOnwezen
2022-01-27 14:23:22 +01:00
Žiga Deisinger
4a0d42ed34
Add code for feature "Disable Touch"
2022-01-26 21:52:08 +01:00
Michał Borsuk
0d5af740a5
correction of spelling of units
2022-01-26 18:08:56 +01:00
Žiga Deisinger
96879d3664
Add code for feature "Disable Touch"
2022-01-26 14:53:31 +01:00
Žiga Deisinger
7af7279ea4
Fix ADS-B not updating Altitude in Map #473
...
This commit will fix altitude not automatically updating when in Map mode. Also set default altitude for AIS to 0.
2022-01-23 22:34:01 +01:00
Arjan Onwezen
dcb67049af
Prepadded MMSI in AIS app with zeros, so it's always 9 chars long as in the specs.
2022-01-16 05:06:53 -05:00
Brumi-2021
4a57af64ce
“Antenna_DC_Bias_missing_in_AIS_and_RADIOSONDE”
2022-01-15 23:09:42 +01:00
Erwin Ried
30449e0adf
Merge pull request #467 from ArjanOnwezen/gui-glitch-in-adsb-rx
...
Small GUI glitch in ADSB RX
2022-01-12 19:06:14 +01:00
Arjan Onwezen
c9a813fbd6
GUI glitch in ADSB RX
2022-01-12 10:31:59 -05:00
eried
0da7d2d0ac
Version bump
2022-01-12 15:35:35 +01:00
eried
7c8f02d05a
Update credits
2022-01-12 15:35:30 +01:00
Erwin Ried
e5015cc67b
Merge pull request #446 from Brumi-2021/“Indep_persistent_memory_14dBs_RF_tx-rx_amp”
...
Minor improvements to the previous PR #395 Add Gain_TX to Replay App
2022-01-12 15:19:54 +01:00
Erwin Ried
03c9812487
Merge pull request #457 from Brumi-2021/Solving_14dBs_lower_TX_AM_than_FM_TX_in_MIC_App
...
Minor improvements, to the previous excellent PR #329 AM-SSB-DSB Mic Functional from aldude999
2022-01-10 11:05:23 +01:00
Erwin Ried
fc08d0ba2d
Merge pull request #452 from ArjanOnwezen/add-operator-to-icao-24
...
Added operator to ICAO24 file
2022-01-10 11:04:15 +01:00
Erwin Ried
dfa7dfb024
Merge pull request #461 from notpike/touchtunes
...
Touchtunes EW Mode Feature
2022-01-04 10:55:22 +01:00
notpike
c713d996ad
TouchTunes TouchTunes New Feature QA
2022-01-03 20:15:54 -08:00
notpike
c2ff37a1c7
TouchTunes TouchTunes New Feature QA
2022-01-03 19:57:51 -08:00
