furrtek
b61869f1c0
Started adding coaster pager/EZRadioPro TX
...
BHT XY TX sequencer
2017-04-07 06:20:24 +01:00
furrtek
1e79be5555
Shameful commit. Fixed HackRF mode not working...
...
Sync'd with Sharebrained's repo, no more SIMD warnings
2017-04-07 02:00:05 +01:00
furrtek
685e4c6e4b
Added more SSTV modes
...
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
furrtek
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
furrtek
5b74b83458
Bitmap preview in SSTV TX
2017-03-22 18:21:31 +00:00
furrtek
089eeeafe4
Tones bugfix, numbers station voice files search
2017-03-22 03:21:06 +00:00
furrtek
16acb9db28
Added roger beep option in mic TX
2017-03-14 08:20:13 +00:00
furrtek
37cfcd392d
Added DCS parity table and generator tool
2017-03-14 07:24:04 +00:00
furrtek
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
229ec3ea75
Added microphone TX (very basic for now)
2017-03-12 07:10:51 +00:00
furrtek
2d75722b74
Added microphone TX (very basic for now)
2017-03-12 07:10:09 +00:00
furrtek
44b2fc469c
Added microphone TX (very basic for now)
2017-03-12 07:09:22 +00:00
furrtek
6ac911feb7
CTCSS bugfix, reading of title in wav files
...
Added wav file title (INFO chunk) display in soundboard UI
Added CTCSS frequency next to PL code
Increased CTCSS tone amplitude
Added Family Radio Service channels file FRS.TXT
2017-03-11 00:59:04 +00:00
furrtek
446efa8fc0
Reduced audio tx FIFO refill size
...
Last received POCSAG address is auto loaded in POCSAG tx
2017-03-05 15:37:56 +00:00
furrtek
aec41cab91
Bugfix: wave file samplerate and size not being written
2017-03-03 16:15:49 +00:00
furrtek
2022fe137c
Morse TX bugfix: bad CW symbols, FM not stopping
...
Corrected fox hunt transmitter #s
Moved widgets a bit
Setting up proc_tones with 0 message length stops it
2017-03-03 08:06:11 +00:00
furrtek
0642c57041
Utility: CW generator
2017-02-15 03:05:38 +00:00
furrtek
58718afd50
Morse CW TX and message set button
2017-02-14 17:16:59 +00:00
furrtek
6c86ad1b72
Morse TX foxhunt codes are working
2017-02-13 23:24:42 +00:00
furrtek
4e8980e5d8
Finished jammer modes
...
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
furrtek
0102a34286
Reverted WFM mode to working state
...
TXView in ADSB TX
Lockable TXView
POCSAG TX bugfix with Alphanum and Numeric only
Testing Labels widget
2017-02-12 04:05:21 +00:00
furrtek
091ec1f8f4
Fixed hackrf.img and terminator.img not being generated
2017-02-11 23:06:01 +00:00
furrtek
fc8279aa30
POCSAG TX text and bitrate can be changed
...
Modal view message can be multiline now
2017-02-07 19:54:18 +00:00
furrtek
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
furrtek
24abe4b427
Yet another POCSAG bugfix (multi-batch messages are not cut anymore)
...
Added BCH ECC functions for checking, error correction and encoding
2017-02-06 20:32:33 +00:00
furrtek
98f89a84bb
Improved POCSAG receiver reliability
2017-02-05 20:57:20 +00:00
furrtek
607e6c5bd4
CTCSS in soundboard. 24 jammer chs instead of 9.
...
Soundboard random mode now cares about loop option.
Started documenting UI.
2017-02-02 09:29:14 +00:00
furrtek
15f66eb74e
Soundboard bugfix: shouldn't crash with long file names
2017-02-01 23:31:16 +00:00
furrtek
394331ebd2
POCSAG RX now runs at 3.072MHz, like NFM audio
2017-02-01 11:40:01 +00:00
furrtek
8662ed4024
Close Call should be more accurate
...
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
furrtek
064e097bc3
Symfield widget auto-inits
...
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
688a012443
Transmitter config widget
...
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
0642d633c3
Frequency manager empty file bugfix
2017-01-30 01:09:00 +00:00
furrtek
c8e71bcdee
Cleaned up jammer UI
2017-01-29 08:29:16 +00:00
furrtek
693a2533b5
Reverted to original CPLD data
2017-01-29 06:50:48 +00:00
furrtek
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e
Udpdated jammer baseband code, should work again
2017-01-17 08:42:35 +00:00
furrtek
b10c88e271
POCSAG bitrate selection and logging toggle
...
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
e4abcea9a3
Added bitrate option for POCSAG baseband, PWMRSSI frequency option
...
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc
Merge 'upstream/master' - At least it builds...
2017-01-16 03:45:44 +00:00
furrtek
12aeae3a82
Commit replay stuff before sync
2017-01-10 19:45:40 +00:00
Jared Boone
052fd1c407
Extract loop into static method.
...
Performance boost as compiler is no longer updating member variable every pass through the loop.
2017-01-06 16:59:57 -08:00
Jared Boone
05eb694c0a
Introduce simd32_t type.
...
Discontinue use of disagreeable __SIMD #define.
2017-01-06 16:57:36 -08:00
Jared Boone
e763592adb
Compile firmware as C++14.
2017-01-05 17:15:00 -08:00
Jared Boone
87383d735c
C++14: Decommission my own make_unique.
2017-01-05 17:14:07 -08:00
Jared Boone
a22dc150bc
C++14: make some wrapper classes static.
...
Also address GCC 6.2 not allowing constexpr from reinterpret_cast<> values.
2017-01-05 17:10:00 -08:00
furrtek
a67feb01fd
Fixed Nuoptix TX, merged DTMF TX with tones TX
2016-12-26 17:51:30 +01:00
furrtek
1e34a48be9
Fixed proc_tones skipping last tone
...
Split ui_bht to bht
2016-12-26 16:15:54 +01:00
furrtek
9470028308
Fixed messup after last squashed commits
2016-12-24 16:54:44 +01:00
furrtek
6bcb7dc1b1
# This is a combination of 2 commits.
...
# The first commit's message is:
Updated RDS transmitter: flags, PI and date/time
Merging baseband audio tone generators
Merging DTMF baseband with "tones" baseband
Added stealth transmit mode
App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there
BHT city DB, keywords removed
BHT cities DB, keywords removed
Update README.md
RDS radiotext and time group generators
# This is the 2nd commit message:
Update README.md
2016-12-24 11:52:11 +01:00
