* Add new jammer modes
Overview
This PR enhances the PortaPack Jammer app by introducing eight new signal types, ported from my Flipper Zero RF Jammer app (https://github.com/RocketGod-git/flipper-zero-rf-jammer). These modes expand the app's capability to disrupt a wide range of RF communication protocols, from analog radios to modern digital systems. The implementation preserves the original app structure, resolves namespace conflicts, and ensures compatibility with the Mayhem firmware.
New Modes
The following modes have been added to the options_type in ui_jammer.hpp, with corresponding signal generation in proc_jammer.cpp:
Noise: Generates broadband white noise to interfere with analog and digital signals (e.g., Wi-Fi, Bluetooth, key fobs). Highly effective for overwhelming receivers across a frequency range.
Sine: Produces a continuous, unmodulated sine wave to jam narrowband receivers, ideal for analog FM/AM radios or telemetry systems.
Square: Emits a harmonic-rich square wave, disrupting digital protocols (e.g., OOK, ASK) and systems sensitive to sharp transitions, such as remote keyless entry.
Sawtooth (Experimental): Generates a sawtooth wave with a unique harmonic profile, useful for testing interference against PWM-based or niche analog systems.
Triangle (Experimental): Creates a triangle wave with minimal harmonics, suitable for exploratory jamming of narrowband systems or receiver linearity testing.
Chirp: Outputs a rapid frequency-sweeping chirp signal, effective against frequency-hopping and spread-spectrum systems (e.g., some Wi-Fi, Bluetooth, or military radios).
Gauss: Generates Gaussian noise to mimic natural interference, targeting digital systems like GPS or data links by degrading signal-to-noise ratios.
Brute (Experimental): Transmits a constant maximum-amplitude signal to saturate simple receiver front-ends, useful for brute-force jamming of basic analog devices.
* Add new jammer modes
Overview
This PR enhances the PortaPack Jammer app by introducing eight new signal types, ported from my Flipper Zero RF Jammer app (https://github.com/RocketGod-git/flipper-zero-rf-jammer). These modes expand the app's capability to disrupt a wide range of RF communication protocols, from analog radios to modern digital systems. The implementation preserves the original app structure, resolves namespace conflicts, and ensures compatibility with the Mayhem firmware.
New Modes
The following modes have been added to the options_type in ui_jammer.hpp, with corresponding signal generation in proc_jammer.cpp:
Noise: Generates broadband white noise to interfere with analog and digital signals (e.g., Wi-Fi, Bluetooth, key fobs). Highly effective for overwhelming receivers across a frequency range.
Sine: Produces a continuous, unmodulated sine wave to jam narrowband receivers, ideal for analog FM/AM radios or telemetry systems.
Square: Emits a harmonic-rich square wave, disrupting digital protocols (e.g., OOK, ASK) and systems sensitive to sharp transitions, such as remote keyless entry.
Sawtooth (Experimental): Generates a sawtooth wave with a unique harmonic profile, useful for testing interference against PWM-based or niche analog systems.
Triangle (Experimental): Creates a triangle wave with minimal harmonics, suitable for exploratory jamming of narrowband systems or receiver linearity testing.
Chirp: Outputs a rapid frequency-sweeping chirp signal, effective against frequency-hopping and spread-spectrum systems (e.g., some Wi-Fi, Bluetooth, or military radios).
Gauss: Generates Gaussian noise to mimic natural interference, targeting digital systems like GPS or data links by degrading signal-to-noise ratios.
Brute (Experimental): Transmits a constant maximum-amplitude signal to saturate simple receiver front-ends, useful for brute-force jamming of basic analog devices.
* slightly improved ads-b receiver module:
* fix Heading, Speed and Vrate decoders
* decode more ModeS messages
* log all ModeS messages (except DF11)
* fix formatting (clang-style); advice on data alignment taken into account
* ADS-B module: convert Indicated AirSpeed to True AirSpeed if altitute is known
* ADS-B rx module: replacing floating point with integer arithmetic
* adding zoom_factor to app settings
* separated zoom_factor settings for AM and AMFM
* fix order so zoom factor is also applied correctly on modulation change
* fix zoom not applied when changing bandwidth
* temporary disable the Scanner so we are not breaking the nightly. Until we are choosing to finally remove it or find a better solution
---------
Co-authored-by: gullradriel <3157857+gullradriel@users.noreply.github.com>
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* wf3
* Ookbrute (#2354)
* Revert "Ookbrute (#2354)"
This reverts commit abb8143eec.
* fix
* test edition
* re enable ble
* re enable ert
* steal amfm stuff
* something happens
* save bmp on start btn
* kinda works
* exit crash fixed
* redline, remove some hardcoded
* removed cpu killer red line, and some fixes
* simplify #1
* seems ok. time to improve
* added hidden freq offset to receiver model, so wefax can be set to the "correct" freq without users needs to substract 300 hz
* badly implemented sync detection, and disabled it.
* fix for fix
* fixes
* fix offset to real life off
* no line on freq enter
* fixes
* changed order of modulations, changed case to avoid capture
* added missing AMAudioFMApt mode to dump pmem
* reorder demod, adding missing ones, fix warnings
* removed uneeded 'previous_modulation', renamed WFAX to AMFM to match other places
* removing uneeded 'previous_modulation' uneeded check in change_modulation
* move capture at the end so AMAUdioFMApt is matching the other arrays for position 4
* added AMFM to Recon Level and Scanner
* clang + more details in some comments
---------
Co-authored-by: gullradriel <gullradriel@no-mail.com>
* first draft of looking beep
* fixed beep squelch range in percent
* took out steps
* gui adjustements
* uniformize calculation and beep squelch in db
* uniformisation, fix 24/48 error
* fix average value being overflow'd
* fix audio and mod changes, preps for beep mode
* fixed beep_freq range, added a stop and set a variable sooner
* added support for audio beep messages
* better scaler for beep
* added bip squelch and saving of bip squelch and audio mode
* saving modulation, fixing audio
* added save and restore of bandwidth
* simpler ctcss clean on change mode
* added Rx Saturation
* testing reducing values to uint8_t
* clang format
* refactorisation
* cleanings
* cleanings
* set back request_m4_performance_counter to zero on app exit
---------
Co-authored-by: GullCode <gullradriel@hotmail.com>
