/** ****************************************************************************** * @file stm32l1xx.h * @author MCD Application Team * @version V1.1.1 * @date 09-March-2012 * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. * This file contains all the peripheral register's definitions, bits * definitions and memory mapping for STM32L1xx High-, Medium-density * and Medium-density Plus devices. * * The file is the unique include file that the application programmer * is using in the C source code, usually in main.c. This file contains: * - Configuration section that allows to select: * - The device used in the target application * - To use or not the peripheral’s drivers in application code(i.e. * code will be based on direct access to peripheral’s registers * rather than drivers API), this option is controlled by * "#define USE_STDPERIPH_DRIVER" * - To change few application-specific parameters such as the HSE * crystal frequency * - Data structures and the address mapping for all peripherals * - Peripheral's registers declarations and bits definition * - Macros to access peripheral’s registers hardware * ****************************************************************************** * @attention * *

© COPYRIGHT 2012 STMicroelectronics

* * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /** @addtogroup CMSIS * @{ */ /** @addtogroup stm32l1xx * @{ */ #ifndef __STM32L1XX_H #define __STM32L1XX_H #ifdef __cplusplus extern "C" { #endif /** @addtogroup Library_configuration_section * @{ */ /* Uncomment the line below according to the target STM32L device used in your application */ #if !defined (STM32L1XX_MD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_HD) /* #define STM32L1XX_MD */ /*!< STM32L1XX_MD: STM32L Ultra Low Power Medium-density devices */ /* #define STM32L1XX_MDP */ /*!< STM32L1XX_MDP: STM32L Ultra Low Power Medium-density Plus devices */ #define STM32L1XX_HD /*!< STM32L1XX_HD: STM32L Ultra Low Power High-density devices */ #endif /* Tip: To avoid modifying this file each time you need to switch between these devices, you can define the device in your toolchain compiler preprocessor. - Ultra Low Power Medium-density devices are STM32L151xx and STM32L152xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - Ultra Low Power Medium-density Plus devices are STM32L151xx, STM32L152xx and STM32L162xx microcontrollers where the Flash memory density is 256 Kbytes. - Ultra Low Power High-density devices are STM32L151xx, STM32L152xx and STM32L162xx microcontrollers where the Flash memory density is 384 Kbytes. */ #if !defined (STM32L1XX_MD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_HD) #error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)" #endif #if !defined USE_STDPERIPH_DRIVER /** * @brief Comment the line below if you will not use the peripherals drivers. In this case, these drivers will not be included and the application code will be based on direct access to peripherals registers */ /*#define USE_STDPERIPH_DRIVER*/ #endif /** * @brief In the following line adjust the value of External High Speed oscillator (HSE) used in your application Tip: To avoid modifying this file each time you need to use different HSE, you can define the HSE value in your toolchain compiler preprocessor. */ #if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ #endif /** * @brief In the following line adjust the External High Speed oscillator (HSE) Startup Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */ #endif /** * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup Timeout value */ #if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSI start up */ #endif #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal High Speed oscillator in Hz. The real value may vary depending on the variations in voltage and temperature. */ #endif #if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000) /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ #endif #if !defined (LSE_VALUE) #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ #endif /** * @brief STM32L1xx Standard Peripheral Library version number V1.1.1 */ #define __STM32L1XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */ #define __STM32L1XX_STDPERIPH_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ #define __STM32L1XX_STDPERIPH_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */ #define __STM32L1XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */ #define __STM32L1XX_STDPERIPH_VERSION ( (__STM32L1XX_STDPERIPH_VERSION_MAIN << 24)\ |(__STM32L1XX_STDPERIPH_VERSION_SUB1 << 16)\ |(__STM32L1XX_STDPERIPH_VERSION_SUB2 << 8)\ |(__STM32L1XX_STDPERIPH_VERSION_RC)) /** * @} */ /** @addtogroup Configuration_section_for_CMSIS * @{ */ /** * @brief STM32L1xx Interrupt Number Definition, according to the selected device * in @ref Library_configuration_section */ #define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */ #define __MPU_PRESENT 1 /*!< STM32L provides MPU */ #define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /*!< Interrupt Number Definition */ typedef enum IRQn { /****** Cortex-M3 Processor Exceptions Numbers ******************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ /****** STM32L specific Interrupt Numbers ***********************************************************/ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ TAMPER_STAMP_IRQn = 2, /*!< Tamper and Time Stamp through EXTI Line Interrupts */ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */ FLASH_IRQn = 4, /*!< FLASH global Interrupt */ RCC_IRQn = 5, /*!< RCC global Interrupt */ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */ DAC_IRQn = 21, /*!< DAC Interrupt */ COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ LCD_IRQn = 24, /*!< LCD Interrupt */ TIM9_IRQn = 25, /*!< TIM9 global Interrupt */ TIM10_IRQn = 26, /*!< TIM10 global Interrupt */ TIM11_IRQn = 27, /*!< TIM11 global Interrupt */ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ USART1_IRQn = 37, /*!< USART1 global Interrupt */ USART2_IRQn = 38, /*!< USART2 global Interrupt */ USART3_IRQn = 39, /*!< USART3 global Interrupt */ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */ TIM6_IRQn = 43, /*!< TIM6 global Interrupt */ #ifdef STM32L1XX_MD TIM7_IRQn = 44 /*!< TIM7 global Interrupt */ #endif #ifdef STM32L1XX_MDP TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ /* CHIBIOS FIX */ TIM5_IRQn = 45, /*!< TIM5 global Interrupt */ SPI3_IRQn = 46, /*!< SPI3 global Interrupt */ DMA2_Channel1_IRQn = 47, /*!< DMA2 Channel 1 global Interrupt */ DMA2_Channel2_IRQn = 48, /*!< DMA2 Channel 2 global Interrupt */ DMA2_Channel3_IRQn = 49, /*!< DMA2 Channel 3 global Interrupt */ DMA2_Channel4_IRQn = 50, /*!< DMA2 Channel 4 global Interrupt */ DMA2_Channel5_IRQn = 51, /*!< DMA2 Channel 5 global Interrupt */ AES_IRQn = 52, /*!< AES global Interrupt */ COMP_ACQ_IRQn = 53 /*!< Comparator Channel Acquisition global Interrupt */ #endif #ifdef STM32L1XX_HD TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ SDIO_IRQn = 45, /*!< SDIO global Interrupt */ TIM5_IRQn = 46, /*!< TIM5 global Interrupt */ SPI3_IRQn = 47, /*!< SPI3 global Interrupt */ UART4_IRQn = 48, /*!< UART4 global Interrupt */ UART5_IRQn = 49, /*!< UART5 global Interrupt */ DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */ DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */ DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */ DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */ DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */ AES_IRQn = 55, /*!< AES global Interrupt */ COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */ #endif } IRQn_Type; /** * @} */ #include "core_cm3.h" /* CHIBIOS FIX */ /*#include "system_stm32l1xx.h"*/ #include /** @addtogroup Exported_types * @{ */ typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; /** * @brief __RAM_FUNC definition */ #if defined ( __CC_ARM ) /* ARM Compiler ------------ RAM functions are defined using the toolchain options. Functions that are executed in RAM should reside in a separate source module. Using the 'Options for File' dialog you can simply change the 'Code / Const' area of a module to a memory space in physical RAM. Available memory areas are declared in the 'Target' tab of the 'Options for Target' dialog. */ #define __RAM_FUNC FLASH_Status #elif defined ( __ICCARM__ ) /* ICCARM Compiler --------------- RAM functions are defined using a specific toolchain keyword "__ramfunc". */ #define __RAM_FUNC __ramfunc FLASH_Status #elif defined ( __GNUC__ ) /* GNU Compiler ------------ RAM functions are defined using a specific toolchain attribute "__attribute__((section(".data")))". */ #define __RAM_FUNC FLASH_Status __attribute__((section(".data"))) #elif defined ( __TASKING__ ) /* TASKING Compiler ---------------- RAM functions are defined using a specific toolchain pragma. This pragma is defined in the stm32l1xx_flash_ramfunc.c */ #define __RAM_FUNC FLASH_Status #endif /** * @} */ /** @addtogroup Peripheral_registers_structures * @{ */ /** * @brief Analog to Digital Converter */ typedef struct { __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */ __IO uint32_t SMPR0; /*!< ADC sample time register 0, Address offset: 0x5C */ } ADC_TypeDef; typedef struct { __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ } ADC_Common_TypeDef; /** * @brief AES hardware accelerator */ typedef struct { __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ } AES_TypeDef; /** * @brief Comparator */ typedef struct { __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */ } COMP_TypeDef; /** * @brief CRC calculation unit */ typedef struct { __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ uint8_t RESERVED0; /*!< Reserved, 0x05 */ uint16_t RESERVED1; /*!< Reserved, 0x06 */ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ } CRC_TypeDef; /** * @brief Digital to Analog Converter */ typedef struct { __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ } DAC_TypeDef; /** * @brief Debug MCU */ typedef struct { __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ }DBGMCU_TypeDef; /** * @brief DMA Controller */ typedef struct { __IO uint32_t CCR; /*!< DMA channel x configuration register */ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ __IO uint32_t CMAR; /*!< DMA channel x memory address register */ } DMA_Channel_TypeDef; typedef struct { __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ } DMA_TypeDef; /** * @brief External Interrupt/Event Controller */ typedef struct { __IO uint32_t IMR; /*!< EXTI interrupt mask register, Address offset: 0x00 */ __IO uint32_t EMR; /*!< EXTI event mask register, Address offset: 0x04 */ __IO uint32_t RTSR; /*!< EXTI rising edge trigger selection register, Address offset: 0x08 */ __IO uint32_t FTSR; /*!< EXTI Falling edge trigger selection register, Address offset: 0x0C */ __IO uint32_t SWIER; /*!< EXTI software interrupt event register, Address offset: 0x10 */ __IO uint32_t PR; /*!< EXTI pending register, Address offset: 0x14 */ } EXTI_TypeDef; /** * @brief FLASH Registers */ typedef struct { __IO uint32_t ACR; /*!< Access control register, Address offset: 0x00 */ __IO uint32_t PECR; /*!< Program/erase control register, Address offset: 0x04 */ __IO uint32_t PDKEYR; /*!< Power down key register, Address offset: 0x08 */ __IO uint32_t PEKEYR; /*!< Program/erase key register, Address offset: 0x0c */ __IO uint32_t PRGKEYR; /*!< Program memory key register, Address offset: 0x10 */ __IO uint32_t OPTKEYR; /*!< Option byte key register, Address offset: 0x14 */ __IO uint32_t SR; /*!< Status register, Address offset: 0x18 */ __IO uint32_t OBR; /*!< Option byte register, Address offset: 0x1c */ __IO uint32_t WRPR; /*!< Write protection register, Address offset: 0x20 */ uint32_t RESERVED[23]; /*!< Reserved, 0x24 */ __IO uint32_t WRPR1; /*!< Write protection register 1, Address offset: 0x28 */ __IO uint32_t WRPR2; /*!< Write protection register 2, Address offset: 0x2C */ } FLASH_TypeDef; /** * @brief Option Bytes Registers */ typedef struct { __IO uint32_t RDP; /*!< Read protection register, Address offset: 0x00 */ __IO uint32_t USER; /*!< user register, Address offset: 0x04 */ __IO uint32_t WRP01; /*!< write protection register 0 1, Address offset: 0x08 */ __IO uint32_t WRP23; /*!< write protection register 2 3, Address offset: 0x0C */ __IO uint32_t WRP45; /*!< write protection register 4 5, Address offset: 0x10 */ __IO uint32_t WRP67; /*!< write protection register 6 7, Address offset: 0x14 */ __IO uint32_t WRP89; /*!< write protection register 8 9, Address offset: 0x18 */ __IO uint32_t WRP1011; /*!< write protection register 10 11, Address offset: 0x1C */ } OB_TypeDef; /** * @brief Operational Amplifier (OPAMP) */ typedef struct { __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ } OPAMP_TypeDef; /** * @brief Flexible Static Memory Controller */ typedef struct { __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ } FSMC_Bank1_TypeDef; /** * @brief Flexible Static Memory Controller Bank1E */ typedef struct { __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ } FSMC_Bank1E_TypeDef; /** * @brief General Purpose IO */ /* CHIBIOS FIX */ #if 0 typedef struct { __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ __IO uint16_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ uint16_t RESERVED0; /*!< Reserved, 0x06 */ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ __IO uint16_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ uint16_t RESERVED1; /*!< Reserved, 0x12 */ __IO uint16_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ uint16_t RESERVED2; /*!< Reserved, 0x16 */ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low registerBSRR, Address offset: 0x18 */ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high registerBSRR, Address offset: 0x1A */ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */ __IO uint16_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */ uint16_t RESERVED3; /*!< Reserved, 0x2A */ } GPIO_TypeDef; #endif /** * @brief SysTem Configuration */ typedef struct { __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ } SYSCFG_TypeDef; /** * @brief Inter-integrated Circuit Interface */ typedef struct { __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ uint16_t RESERVED0; /*!< Reserved, 0x02 */ __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ uint16_t RESERVED1; /*!< Reserved, 0x06 */ __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ uint16_t RESERVED2; /*!< Reserved, 0x0A */ __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ uint16_t RESERVED3; /*!< Reserved, 0x0E */ __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */ uint16_t RESERVED4; /*!< Reserved, 0x12 */ __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ uint16_t RESERVED5; /*!< Reserved, 0x16 */ __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ uint16_t RESERVED6; /*!< Reserved, 0x1A */ __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ uint16_t RESERVED7; /*!< Reserved, 0x1E */ __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ uint16_t RESERVED8; /*!< Reserved, 0x22 */ } I2C_TypeDef; /** * @brief Independent WATCHDOG */ typedef struct { __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ } IWDG_TypeDef; /** * @brief LCD */ typedef struct { __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ } LCD_TypeDef; /** * @brief Power Control */ typedef struct { __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ } PWR_TypeDef; /** * @brief Reset and Clock Control */ typedef struct { __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */ __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x08 */ __IO uint32_t CIR; /*!< RCC Clock interrupt register, Address offset: 0x0C */ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x10 */ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x14 */ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x18 */ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x1C */ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x20 */ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x24 */ __IO uint32_t AHBLPENR; /*!< RCC AHB peripheral clock enable in low power mode register, Address offset: 0x28 */ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x2C */ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x30 */ __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x34 */ } RCC_TypeDef; /** * @brief Routing Interface */ typedef struct { __IO uint32_t ICR; /*!< RI input capture register, Address offset: 0x00 */ __IO uint32_t ASCR1; /*!< RI analog switches control register, Address offset: 0x04 */ __IO uint32_t ASCR2; /*!< RI analog switch control register 2, Address offset: 0x08 */ __IO uint32_t HYSCR1; /*!< RI hysteresis control register, Address offset: 0x0C */ __IO uint32_t HYSCR2; /*!< RI Hysteresis control register, Address offset: 0x10 */ __IO uint32_t HYSCR3; /*!< RI Hysteresis control register, Address offset: 0x14 */ __IO uint32_t HYSCR4; /*!< RI Hysteresis control register, Address offset: 0x18 */ } RI_TypeDef; /** * @brief Real-Time Clock */ typedef struct { __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ __IO uint32_t CALR; /*!< RRTC calibration register, Address offset: 0x3C */ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ uint32_t RESERVED7; /*!< Reserved, 0x4C */ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ } RTC_TypeDef; /** * @brief SD host Interface */ typedef struct { __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */ } SDIO_TypeDef; /** * @brief Serial Peripheral Interface */ typedef struct { __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ uint16_t RESERVED0; /*!< Reserved, 0x02 */ __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ uint16_t RESERVED1; /*!< Reserved, 0x06 */ __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */ uint16_t RESERVED2; /*!< Reserved, 0x0A */ __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */ uint16_t RESERVED3; /*!< Reserved, 0x0E */ __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ uint16_t RESERVED4; /*!< Reserved, 0x12 */ __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ uint16_t RESERVED5; /*!< Reserved, 0x16 */ __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ uint16_t RESERVED6; /*!< Reserved, 0x1A */ __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ uint16_t RESERVED7; /*!< Reserved, 0x1E */ __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ uint16_t RESERVED8; /*!< Reserved, 0x22 */ } SPI_TypeDef; /** * @brief TIM */ typedef struct { __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ uint16_t RESERVED0; /*!< Reserved, 0x02 */ __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ uint16_t RESERVED1; /*!< Reserved, 0x06 */ __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ uint16_t RESERVED2; /*!< Reserved, 0x0A */ __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ uint16_t RESERVED3; /*!< Reserved, 0x0E */ __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */ uint16_t RESERVED4; /*!< Reserved, 0x12 */ __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ uint16_t RESERVED5; /*!< Reserved, 0x16 */ __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ uint16_t RESERVED6; /*!< Reserved, 0x1A */ __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ uint16_t RESERVED7; /*!< Reserved, 0x1E */ __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ uint16_t RESERVED8; /*!< Reserved, 0x22 */ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ uint16_t RESERVED10; /*!< Reserved, 0x2A */ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ uint32_t RESERVED12; /*!< Reserved, 0x30 */ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ uint32_t RESERVED17; /*!< Reserved, 0x44 */ __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ uint16_t RESERVED18; /*!< Reserved, 0x4A */ __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ uint16_t RESERVED19; /*!< Reserved, 0x4E */ __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */ uint16_t RESERVED20; /*!< Reserved, 0x52 */ } TIM_TypeDef; /** * @brief Universal Synchronous Asynchronous Receiver Transmitter */ typedef struct { __IO uint16_t SR; /*!< USART Status register, Address offset: 0x00 */ uint16_t RESERVED0; /*!< Reserved, 0x02 */ __IO uint16_t DR; /*!< USART Data register, Address offset: 0x04 */ uint16_t RESERVED1; /*!< Reserved, 0x06 */ __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ uint16_t RESERVED2; /*!< Reserved, 0x0A */ __IO uint16_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ uint16_t RESERVED3; /*!< Reserved, 0x0E */ __IO uint16_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ uint16_t RESERVED4; /*!< Reserved, 0x12 */ __IO uint16_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ uint16_t RESERVED5; /*!< Reserved, 0x16 */ __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ uint16_t RESERVED6; /*!< Reserved, 0x1A */ } USART_TypeDef; /** * @brief Window WATCHDOG */ typedef struct { __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ } WWDG_TypeDef; /** * @} */ /** @addtogroup Peripheral_memory_map * @{ */ #define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ #define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ #define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ #define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ #define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ #define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ /*!< Peripheral memory map */ #define APB1PERIPH_BASE PERIPH_BASE #define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) #define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) #define TIM2_BASE (APB1PERIPH_BASE + 0x0000) #define TIM3_BASE (APB1PERIPH_BASE + 0x0400) #define TIM4_BASE (APB1PERIPH_BASE + 0x0800) #define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) #define TIM6_BASE (APB1PERIPH_BASE + 0x1000) #define TIM7_BASE (APB1PERIPH_BASE + 0x1400) #define LCD_BASE (APB1PERIPH_BASE + 0x2400) #define RTC_BASE (APB1PERIPH_BASE + 0x2800) #define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) #define IWDG_BASE (APB1PERIPH_BASE + 0x3000) #define SPI2_BASE (APB1PERIPH_BASE + 0x3800) #define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) #define USART2_BASE (APB1PERIPH_BASE + 0x4400) #define USART3_BASE (APB1PERIPH_BASE + 0x4800) #define UART4_BASE (APB1PERIPH_BASE + 0x4C00) #define UART5_BASE (APB1PERIPH_BASE + 0x5000) #define I2C1_BASE (APB1PERIPH_BASE + 0x5400) #define I2C2_BASE (APB1PERIPH_BASE + 0x5800) #define PWR_BASE (APB1PERIPH_BASE + 0x7000) #define DAC_BASE (APB1PERIPH_BASE + 0x7400) #define COMP_BASE (APB1PERIPH_BASE + 0x7C00) #define RI_BASE (APB1PERIPH_BASE + 0x7C04) #define OPAMP_BASE (APB1PERIPH_BASE + 0x7C5C) #define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000) #define EXTI_BASE (APB2PERIPH_BASE + 0x0400) #define TIM9_BASE (APB2PERIPH_BASE + 0x0800) #define TIM10_BASE (APB2PERIPH_BASE + 0x0C00) #define TIM11_BASE (APB2PERIPH_BASE + 0x1000) #define ADC1_BASE (APB2PERIPH_BASE + 0x2400) #define ADC_BASE (APB2PERIPH_BASE + 0x2700) #define SDIO_BASE (APB2PERIPH_BASE + 0x2C00) #define SPI1_BASE (APB2PERIPH_BASE + 0x3000) #define USART1_BASE (APB2PERIPH_BASE + 0x3800) #define GPIOA_BASE (AHBPERIPH_BASE + 0x0000) #define GPIOB_BASE (AHBPERIPH_BASE + 0x0400) #define GPIOC_BASE (AHBPERIPH_BASE + 0x0800) #define GPIOD_BASE (AHBPERIPH_BASE + 0x0C00) #define GPIOE_BASE (AHBPERIPH_BASE + 0x1000) #define GPIOH_BASE (AHBPERIPH_BASE + 0x1400) #define GPIOF_BASE (AHBPERIPH_BASE + 0x1800) #define GPIOG_BASE (AHBPERIPH_BASE + 0x1C00) #define CRC_BASE (AHBPERIPH_BASE + 0x3000) #define RCC_BASE (AHBPERIPH_BASE + 0x3800) #define FLASH_R_BASE (AHBPERIPH_BASE + 0x3C00) /*!< FLASH registers base address */ #define OB_BASE ((uint32_t)0x1FF80000) /*!< FLASH Option Bytes base address */ #define DMA1_BASE (AHBPERIPH_BASE + 0x6000) #define DMA1_Channel1_BASE (DMA1_BASE + 0x0008) #define DMA1_Channel2_BASE (DMA1_BASE + 0x001C) #define DMA1_Channel3_BASE (DMA1_BASE + 0x0030) #define DMA1_Channel4_BASE (DMA1_BASE + 0x0044) #define DMA1_Channel5_BASE (DMA1_BASE + 0x0058) #define DMA1_Channel6_BASE (DMA1_BASE + 0x006C) #define DMA1_Channel7_BASE (DMA1_BASE + 0x0080) #define DMA2_BASE (AHBPERIPH_BASE + 0x6400) #define DMA2_Channel1_BASE (DMA2_BASE + 0x0008) #define DMA2_Channel2_BASE (DMA2_BASE + 0x001C) #define DMA2_Channel3_BASE (DMA2_BASE + 0x0030) #define DMA2_Channel4_BASE (DMA2_BASE + 0x0044) #define DMA2_Channel5_BASE (DMA2_BASE + 0x0058) #define AES_BASE ((uint32_t)0x50060000) #define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ #define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ #define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ /** * @} */ /** @addtogroup Peripheral_declaration * @{ */ #define TIM2 ((TIM_TypeDef *) TIM2_BASE) #define TIM3 ((TIM_TypeDef *) TIM3_BASE) #define TIM4 ((TIM_TypeDef *) TIM4_BASE) #define TIM5 ((TIM_TypeDef *) TIM5_BASE) #define TIM6 ((TIM_TypeDef *) TIM6_BASE) #define TIM7 ((TIM_TypeDef *) TIM7_BASE) #define LCD ((LCD_TypeDef *) LCD_BASE) #define RTC ((RTC_TypeDef *) RTC_BASE) #define WWDG ((WWDG_TypeDef *) WWDG_BASE) #define IWDG ((IWDG_TypeDef *) IWDG_BASE) #define SPI2 ((SPI_TypeDef *) SPI2_BASE) #define SPI3 ((SPI_TypeDef *) SPI3_BASE) #define USART2 ((USART_TypeDef *) USART2_BASE) #define USART3 ((USART_TypeDef *) USART3_BASE) #define UART4 ((USART_TypeDef *) UART4_BASE) #define UART5 ((USART_TypeDef *) UART5_BASE) #define I2C1 ((I2C_TypeDef *) I2C1_BASE) #define I2C2 ((I2C_TypeDef *) I2C2_BASE) #define PWR ((PWR_TypeDef *) PWR_BASE) #define DAC ((DAC_TypeDef *) DAC_BASE) #define COMP ((COMP_TypeDef *) COMP_BASE) #define RI ((RI_TypeDef *) RI_BASE) #define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) #define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) #define EXTI ((EXTI_TypeDef *) EXTI_BASE) #define ADC1 ((ADC_TypeDef *) ADC1_BASE) #define ADC ((ADC_Common_TypeDef *) ADC_BASE) #define SDIO ((SDIO_TypeDef *) SDIO_BASE) #define TIM9 ((TIM_TypeDef *) TIM9_BASE) #define TIM10 ((TIM_TypeDef *) TIM10_BASE) #define TIM11 ((TIM_TypeDef *) TIM11_BASE) #define SPI1 ((SPI_TypeDef *) SPI1_BASE) #define USART1 ((USART_TypeDef *) USART1_BASE) #define DMA1 ((DMA_TypeDef *) DMA1_BASE) #define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) #define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) #define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) #define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) #define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) #define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) #define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) #define DMA2 ((DMA_TypeDef *) DMA2_BASE) #define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) #define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) #define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) #define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) #define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) #define RCC ((RCC_TypeDef *) RCC_BASE) #define CRC ((CRC_TypeDef *) CRC_BASE) #define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) #define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) #define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) #define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) #define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) #define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) #define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) #define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) #define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) #define OB ((OB_TypeDef *) OB_BASE) #define AES ((AES_TypeDef *) AES_BASE) #define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) #define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) #define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) /** * @} */ /** @addtogroup Exported_constants * @{ */ /** @addtogroup Peripheral_Registers_Bits_Definition * @{ */ /******************************************************************************/ /* Peripheral Registers Bits Definition */ /******************************************************************************/ /******************************************************************************/ /* */ /* Analog to Digital Converter (ADC) */ /* */ /******************************************************************************/ /******************** Bit definition for ADC_SR register ********************/ #define ADC_SR_AWD ((uint32_t)0x00000001) /*!< Analog watchdog flag */ #define ADC_SR_EOC ((uint32_t)0x00000002) /*!< End of conversion */ #define ADC_SR_JEOC ((uint32_t)0x00000004) /*!< Injected channel end of conversion */ #define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!< Injected channel Start flag */ #define ADC_SR_STRT ((uint32_t)0x00000010) /*!< Regular channel Start flag */ #define ADC_SR_OVR ((uint32_t)0x00000020) /*!< Overrun flag */ #define ADC_SR_ADONS ((uint32_t)0x00000040) /*!< ADC ON status */ #define ADC_SR_RCNR ((uint32_t)0x00000100) /*!< Regular channel not ready flag */ #define ADC_SR_JCNR ((uint32_t)0x00000200) /*!< Injected channel not ready flag */ /******************* Bit definition for ADC_CR1 register ********************/ #define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ #define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ #define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ #define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ #define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ #define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ #define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ #define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ #define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ #define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ #define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ #define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ #define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ #define ADC_CR1_PDD ((uint32_t)0x00010000) /*!< Power Down during Delay phase */ #define ADC_CR1_PDI ((uint32_t)0x00020000) /*!< Power Down during Idle phase */ #define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ #define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ #define ADC_CR1_RES ((uint32_t)0x03000000) /*!< RES[1:0] bits (Resolution) */ #define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!< Overrun interrupt enable */ /******************* Bit definition for ADC_CR2 register ********************/ #define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ #define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ #define ADC_CR2_CFG ((uint32_t)0x00000004) /*!< ADC Configuration */ #define ADC_CR2_DELS ((uint32_t)0x00000070) /*!< DELS[2:0] bits (Delay selection) */ #define ADC_CR2_DELS_0 ((uint32_t)0x00000010) /*!< Bit 0 */ #define ADC_CR2_DELS_1 ((uint32_t)0x00000020) /*!< Bit 1 */ #define ADC_CR2_DELS_2 ((uint32_t)0x00000040) /*!< Bit 2 */ #define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ #define ADC_CR2_DDS ((uint32_t)0x00000200) /*!< DMA disable selection (Single ADC) */ #define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!< End of conversion selection */ #define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ #define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!< JEXTSEL[3:0] bits (External event select for injected group) */ #define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */ #define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */ #define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!< Bit 2 */ #define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!< Bit 3 */ #define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!< JEXTEN[1:0] bits (External Trigger Conversion mode for injected channels) */ #define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!< Start Conversion of injected channels */ #define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!< EXTSEL[3:0] bits (External Event Select for regular group) */ #define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!< Bit 3 */ #define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */ #define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!< Bit 0 */ #define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!< Bit 1 */ #define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!< Start Conversion of regular channels */ /****************** Bit definition for ADC_SMPR1 register *******************/ #define ADC_SMPR1_SMP20 ((uint32_t)0x00000007) /*!< SMP20[2:0] bits (Channel 20 Sample time selection) */ #define ADC_SMPR1_SMP20_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR1_SMP20_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR1_SMP20_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR1_SMP21 ((uint32_t)0x00000038) /*!< SMP21[2:0] bits (Channel 21 Sample time selection) */ #define ADC_SMPR1_SMP21_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR1_SMP21_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR1_SMP21_2 ((uint32_t)0x00000020) /*!< Bit 2 */ #define ADC_SMPR1_SMP22 ((uint32_t)0x000001C0) /*!< SMP22[2:0] bits (Channel 22 Sample time selection) */ #define ADC_SMPR1_SMP22_0 ((uint32_t)0x00000040) /*!< Bit 0 */ #define ADC_SMPR1_SMP22_1 ((uint32_t)0x00000080) /*!< Bit 1 */ #define ADC_SMPR1_SMP22_2 ((uint32_t)0x00000100) /*!< Bit 2 */ #define ADC_SMPR1_SMP23 ((uint32_t)0x00000E00) /*!< SMP23[2:0] bits (Channel 23 Sample time selection) */ #define ADC_SMPR1_SMP23_0 ((uint32_t)0x00000200) /*!< Bit 0 */ #define ADC_SMPR1_SMP23_1 ((uint32_t)0x00000400) /*!< Bit 1 */ #define ADC_SMPR1_SMP23_2 ((uint32_t)0x00000800) /*!< Bit 2 */ #define ADC_SMPR1_SMP24 ((uint32_t)0x00007000) /*!< SMP24[2:0] bits (Channel 24 Sample time selection) */ #define ADC_SMPR1_SMP24_0 ((uint32_t)0x00001000) /*!< Bit 0 */ #define ADC_SMPR1_SMP24_1 ((uint32_t)0x00002000) /*!< Bit 1 */ #define ADC_SMPR1_SMP24_2 ((uint32_t)0x00004000) /*!< Bit 2 */ #define ADC_SMPR1_SMP25 ((uint32_t)0x00038000) /*!< SMP25[2:0] bits (Channel 25 Sample time selection) */ #define ADC_SMPR1_SMP25_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SMPR1_SMP25_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SMPR1_SMP25_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SMPR1_SMP26 ((uint32_t)0x001C0000) /*!< SMP26[2:0] bits (Channel 26 Sample time selection) */ #define ADC_SMPR1_SMP26_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define ADC_SMPR1_SMP26_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define ADC_SMPR1_SMP26_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define ADC_SMPR1_SMP27 ((uint32_t)0x00E00000) /*!< SMP27[2:0] bits (Channel 27 Sample time selection) */ #define ADC_SMPR1_SMP27_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define ADC_SMPR1_SMP27_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define ADC_SMPR1_SMP27_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define ADC_SMPR1_SMP28 ((uint32_t)0x07000000) /*!< SMP28[2:0] bits (Channel 28 Sample time selection) */ #define ADC_SMPR1_SMP28_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_SMPR1_SMP28_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_SMPR1_SMP28_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_SMPR1_SMP29 ((uint32_t)0x38000000) /*!< SMP29[2:0] bits (Channel 29 Sample time selection) */ #define ADC_SMPR1_SMP29_0 ((uint32_t)0x08000000) /*!< Bit 0 */ #define ADC_SMPR1_SMP29_1 ((uint32_t)0x10000000) /*!< Bit 1 */ #define ADC_SMPR1_SMP29_2 ((uint32_t)0x20000000) /*!< Bit 2 */ /****************** Bit definition for ADC_SMPR2 register *******************/ #define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ #define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ #define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ #define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ #define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ #define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ #define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ #define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ #define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ #define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ #define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ #define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ #define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ #define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ #define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ #define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 5 Sample time selection) */ #define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ #define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ #define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< SMP18[2:0] bits (Channel 18 Sample time selection) */ #define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_SMPR2_SMP19 ((uint32_t)0x38000000) /*!< SMP19[2:0] bits (Channel 19 Sample time selection) */ #define ADC_SMPR2_SMP19_0 ((uint32_t)0x08000000) /*!< Bit 0 */ #define ADC_SMPR2_SMP19_1 ((uint32_t)0x10000000) /*!< Bit 1 */ #define ADC_SMPR2_SMP19_2 ((uint32_t)0x20000000) /*!< Bit 2 */ /****************** Bit definition for ADC_SMPR3 register *******************/ #define ADC_SMPR3_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ #define ADC_SMPR3_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR3_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR3_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR3_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ #define ADC_SMPR3_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR3_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR3_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ #define ADC_SMPR3_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ #define ADC_SMPR3_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ #define ADC_SMPR3_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ #define ADC_SMPR3_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ #define ADC_SMPR3_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ #define ADC_SMPR3_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ #define ADC_SMPR3_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ #define ADC_SMPR3_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ #define ADC_SMPR3_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ #define ADC_SMPR3_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ #define ADC_SMPR3_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ #define ADC_SMPR3_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ #define ADC_SMPR3_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ #define ADC_SMPR3_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SMPR3_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SMPR3_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SMPR3_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ #define ADC_SMPR3_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define ADC_SMPR3_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define ADC_SMPR3_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define ADC_SMPR3_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ #define ADC_SMPR3_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define ADC_SMPR3_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define ADC_SMPR3_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define ADC_SMPR3_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ #define ADC_SMPR3_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_SMPR3_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_SMPR3_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_SMPR3_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ #define ADC_SMPR3_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ #define ADC_SMPR3_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ #define ADC_SMPR3_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ /****************** Bit definition for ADC_JOFR1 register *******************/ #define ADC_JOFR1_JOFFSET1 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 1 */ /****************** Bit definition for ADC_JOFR2 register *******************/ #define ADC_JOFR2_JOFFSET2 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 2 */ /****************** Bit definition for ADC_JOFR3 register *******************/ #define ADC_JOFR3_JOFFSET3 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 3 */ /****************** Bit definition for ADC_JOFR4 register *******************/ #define ADC_JOFR4_JOFFSET4 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 4 */ /******************* Bit definition for ADC_HTR register ********************/ #define ADC_HTR_HT ((uint32_t)0x00000FFF) /*!< Analog watchdog high threshold */ /******************* Bit definition for ADC_LTR register ********************/ #define ADC_LTR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */ /******************* Bit definition for ADC_SQR1 register *******************/ #define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */ #define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR1_SQ28 ((uint32_t)0x000F8000) /*!< SQ28[4:0] bits (25th conversion in regular sequence) */ #define ADC_SQR1_SQ28_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR1_SQ28_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR1_SQ28_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR1_SQ28_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR1_SQ28_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR1_SQ27 ((uint32_t)0x00007C00) /*!< SQ27[4:0] bits (27th conversion in regular sequence) */ #define ADC_SQR1_SQ27_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR1_SQ27_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR1_SQ27_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR1_SQ27_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR1_SQ27_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */ #define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */ #define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR2 register *******************/ #define ADC_SQR2_SQ19 ((uint32_t)0x0000001F) /*!< SQ19[4:0] bits (19th conversion in regular sequence) */ #define ADC_SQR2_SQ19_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR2_SQ19_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR2_SQ19_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR2_SQ19_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR2_SQ19_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR2_SQ20 ((uint32_t)0x000003E0) /*!< SQ20[4:0] bits (20th conversion in regular sequence) */ #define ADC_SQR2_SQ20_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR2_SQ20_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR2_SQ20_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR2_SQ20_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR2_SQ20_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR2_SQ21 ((uint32_t)0x00007C00) /*!< SQ21[4:0] bits (21th conversion in regular sequence) */ #define ADC_SQR2_SQ21_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR2_SQ21_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR2_SQ21_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR2_SQ21_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR2_SQ21_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR2_SQ22 ((uint32_t)0x000F8000) /*!< SQ22[4:0] bits (22th conversion in regular sequence) */ #define ADC_SQR2_SQ22_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR2_SQ22_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR2_SQ22_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR2_SQ22_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR2_SQ22_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR2_SQ23 ((uint32_t)0x01F00000) /*!< SQ23[4:0] bits (23th conversion in regular sequence) */ #define ADC_SQR2_SQ23_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR2_SQ23_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR2_SQ23_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR2_SQ23_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR2_SQ23_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR2_SQ24 ((uint32_t)0x3E000000) /*!< SQ24[4:0] bits (24th conversion in regular sequence) */ #define ADC_SQR2_SQ24_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR2_SQ24_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR2_SQ24_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR2_SQ24_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR2_SQ24_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR3 register *******************/ #define ADC_SQR3_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ #define ADC_SQR3_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR3_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR3_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR3_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR3_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR3_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ #define ADC_SQR3_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR3_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR3_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR3_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR3_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR3_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ #define ADC_SQR3_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR3_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR3_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR3_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR3_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR3_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ #define ADC_SQR3_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR3_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR3_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR3_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR3_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR3_SQ17 ((uint32_t)0x01F00000) /*!< SQ17[4:0] bits (17th conversion in regular sequence) */ #define ADC_SQR3_SQ17_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR3_SQ17_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR3_SQ17_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR3_SQ17_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR3_SQ17_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR3_SQ18 ((uint32_t)0x3E000000) /*!< SQ18[4:0] bits (18th conversion in regular sequence) */ #define ADC_SQR3_SQ18_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR3_SQ18_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR3_SQ18_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR3_SQ18_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR3_SQ18_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR4 register *******************/ #define ADC_SQR4_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ #define ADC_SQR4_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR4_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR4_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR4_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR4_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR4_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ #define ADC_SQR4_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR4_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR4_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR4_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR4_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR4_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ #define ADC_SQR4_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR4_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR4_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR4_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR4_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR4_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ #define ADC_SQR4_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR4_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR4_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR4_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR4_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR4_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ #define ADC_SQR4_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR4_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR4_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR4_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR4_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR4_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ #define ADC_SQR4_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR4_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR4_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR4_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR4_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR5 register *******************/ #define ADC_SQR5_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ #define ADC_SQR5_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR5_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR5_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR5_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR5_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR5_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ #define ADC_SQR5_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR5_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR5_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR5_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR5_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR5_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ #define ADC_SQR5_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR5_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR5_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR5_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR5_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR5_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ #define ADC_SQR5_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR5_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR5_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR5_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR5_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR5_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ #define ADC_SQR5_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR5_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR5_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR5_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR5_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR5_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ #define ADC_SQR5_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR5_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR5_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR5_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR5_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_JSQR register *******************/ #define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ #define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ #define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ #define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ #define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ #define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ /******************* Bit definition for ADC_JDR1 register *******************/ #define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************* Bit definition for ADC_JDR2 register *******************/ #define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************* Bit definition for ADC_JDR3 register *******************/ #define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************* Bit definition for ADC_JDR4 register *******************/ #define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************** Bit definition for ADC_DR register ********************/ #define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ /****************** Bit definition for ADC_SMPR0 register *******************/ #define ADC_SMPR3_SMP30 ((uint32_t)0x00000007) /*!< SMP30[2:0] bits (Channel 30 Sample time selection) */ #define ADC_SMPR3_SMP30_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR3_SMP30_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR3_SMP30_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR3_SMP31 ((uint32_t)0x00000038) /*!< SMP31[2:0] bits (Channel 31 Sample time selection) */ #define ADC_SMPR3_SMP31_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR3_SMP31_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR3_SMP31_2 ((uint32_t)0x00000020) /*!< Bit 2 */ /******************* Bit definition for ADC_CSR register ********************/ #define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!< ADC1 Analog watchdog flag */ #define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!< ADC1 End of conversion */ #define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!< ADC1 Injected channel end of conversion */ #define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!< ADC1 Injected channel Start flag */ #define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!< ADC1 Regular channel Start flag */ #define ADC_CSR_OVR1 ((uint32_t)0x00000020) /*!< ADC1 overrun flag */ #define ADC_CSR_ADONS1 ((uint32_t)0x00000040) /*!< ADON status of ADC1 */ /******************* Bit definition for ADC_CCR register ********************/ #define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!< ADC prescaler*/ #define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!< Bit 0 */ #define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */ #define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ /******************************************************************************/ /* */ /* Advanced Encryption Standard (AES) */ /* */ /******************************************************************************/ /******************* Bit definition for AES_CR register *********************/ #define AES_CR_EN ((uint32_t)0x00000001) /*!< AES Enable */ #define AES_CR_DATATYPE ((uint32_t)0x00000006) /*!< Data type selection */ #define AES_CR_DATATYPE_0 ((uint32_t)0x00000002) /*!< Bit 0 */ #define AES_CR_DATATYPE_1 ((uint32_t)0x00000004) /*!< Bit 1 */ #define AES_CR_MODE ((uint32_t)0x00000018) /*!< AES Mode Of Operation */ #define AES_CR_MODE_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define AES_CR_MODE_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define AES_CR_CHMOD ((uint32_t)0x00000060) /*!< AES Chaining Mode */ #define AES_CR_CHMOD_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define AES_CR_CHMOD_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define AES_CR_CCFC ((uint32_t)0x00000080) /*!< Computation Complete Flag Clear */ #define AES_CR_ERRC ((uint32_t)0x00000100) /*!< Error Clear */ #define AES_CR_CCIE ((uint32_t)0x00000200) /*!< Computation Complete Interrupt Enable */ #define AES_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */ #define AES_CR_DMAINEN ((uint32_t)0x00000800) /*!< DMA ENable managing the data input phase */ #define AES_CR_DMAOUTEN ((uint32_t)0x00001000) /*!< DMA Enable managing the data output phase */ /******************* Bit definition for AES_SR register *********************/ #define AES_SR_CCF ((uint32_t)0x00000001) /*!< Computation Complete Flag */ #define AES_SR_RDERR ((uint32_t)0x00000002) /*!< Read Error Flag */ #define AES_SR_WRERR ((uint32_t)0x00000004) /*!< Write Error Flag */ /******************* Bit definition for AES_DINR register *******************/ #define AES_DINR ((uint32_t)0x0000FFFF) /*!< AES Data Input Register */ /******************* Bit definition for AES_DOUTR register ******************/ #define AES_DOUTR ((uint32_t)0x0000FFFF) /*!< AES Data Output Register */ /******************* Bit definition for AES_KEYR0 register ******************/ #define AES_KEYR0 ((uint32_t)0x0000FFFF) /*!< AES Key Register 0 */ /******************* Bit definition for AES_KEYR1 register ******************/ #define AES_KEYR1 ((uint32_t)0x0000FFFF) /*!< AES Key Register 1 */ /******************* Bit definition for AES_KEYR2 register ******************/ #define AES_KEYR2 ((uint32_t)0x0000FFFF) /*!< AES Key Register 2 */ /******************* Bit definition for AES_KEYR3 register ******************/ #define AES_KEYR3 ((uint32_t)0x0000FFFF) /*!< AES Key Register 3 */ /******************* Bit definition for AES_IVR0 register *******************/ #define AES_IVR0 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 0 */ /******************* Bit definition for AES_IVR1 register *******************/ #define AES_IVR1 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 1 */ /******************* Bit definition for AES_IVR2 register *******************/ #define AES_IVR2 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 2 */ /******************* Bit definition for AES_IVR3 register *******************/ #define AES_IVR3 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 3 */ /******************************************************************************/ /* */ /* Analog Comparators (COMP) */ /* */ /******************************************************************************/ /****************** Bit definition for COMP_CSR register ********************/ #define COMP_CSR_10KPU ((uint32_t)0x00000001) /*!< 10K pull-up resistor */ #define COMP_CSR_400KPU ((uint32_t)0x00000002) /*!< 400K pull-up resistor */ #define COMP_CSR_10KPD ((uint32_t)0x00000004) /*!< 10K pull-down resistor */ #define COMP_CSR_400KPD ((uint32_t)0x00000008) /*!< 400K pull-down resistor */ #define COMP_CSR_CMP1EN ((uint32_t)0x00000010) /*!< Comparator 1 enable */ #define COMP_CSR_SW1 ((uint32_t)0x00000020) /*!< SW1 analog switch enable */ #define COMP_CSR_CMP1OUT ((uint32_t)0x00000080) /*!< Comparator 1 output */ #define COMP_CSR_SPEED ((uint32_t)0x00001000) /*!< Comparator 2 speed */ #define COMP_CSR_CMP2OUT ((uint32_t)0x00002000) /*!< Comparator 2 ouput */ #define COMP_CSR_VREFOUTEN ((uint32_t)0x00010000) /*!< Comparator Vref Enable */ #define COMP_CSR_WNDWE ((uint32_t)0x00020000) /*!< Window mode enable */ #define COMP_CSR_INSEL ((uint32_t)0x001C0000) /*!< INSEL[2:0] Inversion input Selection */ #define COMP_CSR_INSEL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define COMP_CSR_INSEL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define COMP_CSR_INSEL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define COMP_CSR_OUTSEL ((uint32_t)0x00E00000) /*!< OUTSEL[2:0] comparator 2 output redirection */ #define COMP_CSR_OUTSEL_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define COMP_CSR_OUTSEL_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define COMP_CSR_OUTSEL_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define COMP_CSR_FCH3 ((uint32_t)0x04000000) /*!< Bit 26 */ #define COMP_CSR_FCH8 ((uint32_t)0x08000000) /*!< Bit 27 */ #define COMP_CSR_RCH13 ((uint32_t)0x10000000) /*!< Bit 28 */ #define COMP_CSR_CAIE ((uint32_t)0x20000000) /*!< Bit 29 */ #define COMP_CSR_CAIF ((uint32_t)0x40000000) /*!< Bit 30 */ #define COMP_CSR_TSUSP ((uint32_t)0x80000000) /*!< Bit 31 */ /******************************************************************************/ /* */ /* Operational Amplifier (OPAMP) */ /* */ /******************************************************************************/ /******************* Bit definition for OPAMP_CSR register ******************/ #define OPAMP_CSR_OPA1PD ((uint32_t)0x00000001) /*!< OPAMP1 disable */ #define OPAMP_CSR_S3SEL1 ((uint32_t)0x00000002) /*!< Switch 3 for OPAMP1 Enable */ #define OPAMP_CSR_S4SEL1 ((uint32_t)0x00000004) /*!< Switch 4 for OPAMP1 Enable */ #define OPAMP_CSR_S5SEL1 ((uint32_t)0x00000008) /*!< Switch 5 for OPAMP1 Enable */ #define OPAMP_CSR_S6SEL1 ((uint32_t)0x00000010) /*!< Switch 6 for OPAMP1 Enable */ #define OPAMP_CSR_OPA1CAL_L ((uint32_t)0x00000020) /*!< OPAMP1 Offset calibration for P differential pair */ #define OPAMP_CSR_OPA1CAL_H ((uint32_t)0x00000040) /*!< OPAMP1 Offset calibration for N differential pair */ #define OPAMP_CSR_OPA1LPM ((uint32_t)0x00000080) /*!< OPAMP1 Low power enable */ #define OPAMP_CSR_OPA2PD ((uint32_t)0x00000100) /*!< OPAMP2 disable */ #define OPAMP_CSR_S3SEL2 ((uint32_t)0x00000200) /*!< Switch 3 for OPAMP2 Enable */ #define OPAMP_CSR_S4SEL2 ((uint32_t)0x00000400) /*!< Switch 4 for OPAMP2 Enable */ #define OPAMP_CSR_S5SEL2 ((uint32_t)0x00000800) /*!< Switch 5 for OPAMP2 Enable */ #define OPAMP_CSR_S6SEL2 ((uint32_t)0x00001000) /*!< Switch 6 for OPAMP2 Enable */ #define OPAMP_CSR_OPA2CAL_L ((uint32_t)0x00002000) /*!< OPAMP2 Offset calibration for P differential pair */ #define OPAMP_CSR_OPA2CAL_H ((uint32_t)0x00004000) /*!< OPAMP2 Offset calibration for N differential pair */ #define OPAMP_CSR_OPA2LPM ((uint32_t)0x00008000) /*!< OPAMP2 Low power enable */ #define OPAMP_CSR_OPA3PD ((uint32_t)0x00010000) /*!< OPAMP3 disable */ #define OPAMP_CSR_S3SEL3 ((uint32_t)0x00020000) /*!< Switch 3 for OPAMP3 Enable */ #define OPAMP_CSR_S4SEL3 ((uint32_t)0x00040000) /*!< Switch 4 for OPAMP3 Enable */ #define OPAMP_CSR_S5SEL3 ((uint32_t)0x00080000) /*!< Switch 5 for OPAMP3 Enable */ #define OPAMP_CSR_S6SEL3 ((uint32_t)0x00100000) /*!< Switch 6 for OPAMP3 Enable */ #define OPAMP_CSR_OPA3CAL_L ((uint32_t)0x00200000) /*!< OPAMP3 Offset calibration for P differential pair */ #define OPAMP_CSR_OPA3CAL_H ((uint32_t)0x00400000) /*!< OPAMP3 Offset calibration for N differential pair */ #define OPAMP_CSR_OPA3LPM ((uint32_t)0x00800000) /*!< OPAMP3 Low power enable */ #define OPAMP_CSR_ANAWSEL1 ((uint32_t)0x01000000) /*!< Switch ANA Enable for OPAMP1 */ #define OPAMP_CSR_ANAWSEL2 ((uint32_t)0x02000000) /*!< Switch ANA Enable for OPAMP2 */ #define OPAMP_CSR_ANAWSEL3 ((uint32_t)0x04000000) /*!< Switch ANA Enable for OPAMP3 */ #define OPAMP_CSR_S7SEL2 ((uint32_t)0x08000000) /*!< Switch 7 for OPAMP2 Enable */ #define OPAMP_CSR_AOP_RANGE ((uint32_t)0x10000000) /*!< Power range selection */ #define OPAMP_CSR_OPA1CALOUT ((uint32_t)0x20000000) /*!< OPAMP1 calibration output */ #define OPAMP_CSR_OPA2CALOUT ((uint32_t)0x40000000) /*!< OPAMP2 calibration output */ #define OPAMP_CSR_OPA3CALOUT ((uint32_t)0x80000000) /*!< OPAMP3 calibration output */ /******************* Bit definition for OPAMP_OTR register ******************/ #define OPAMP_OTR_AO1_OPT_OFFSET_TRIM ((uint32_t)0x000003FF) /*!< Offset trim for OPAMP1 */ #define OPAMP_OTR_AO2_OPT_OFFSET_TRIM ((uint32_t)0x000FFC00) /*!< Offset trim for OPAMP2 */ #define OPAMP_OTR_AO3_OPT_OFFSET_TRIM ((uint32_t)0x3FF00000) /*!< Offset trim for OPAMP2 */ #define OPAMP_OTR_OT_USER ((uint32_t)0x80000000) /*!< Switch to OPAMP offset user trimmed values */ /******************* Bit definition for OPAMP_LPOTR register ****************/ #define OPAMP_LP_OTR_AO1_OPT_OFFSET_TRIM_LP ((uint32_t)0x000003FF) /*!< Offset trim in low power for OPAMP1 */ #define OPAMP_LP_OTR_AO2_OPT_OFFSET_TRIM_LP ((uint32_t)0x000FFC00) /*!< Offset trim in low power for OPAMP2 */ #define OPAMP_LP_OTR_AO3_OPT_OFFSET_TRIM_LP ((uint32_t)0x3FF00000) /*!< Offset trim in low power for OPAMP3 */ /******************************************************************************/ /* */ /* CRC calculation unit (CRC) */ /* */ /******************************************************************************/ /******************* Bit definition for CRC_DR register *********************/ #define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ /******************* Bit definition for CRC_IDR register ********************/ #define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ /******************** Bit definition for CRC_CR register ********************/ #define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */ /******************************************************************************/ /* */ /* Digital to Analog Converter (DAC) */ /* */ /******************************************************************************/ /******************** Bit definition for DAC_CR register ********************/ #define DAC_CR_EN1 ((uint32_t)0x00000001) /*!