/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012,2013 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

                                      ---

    A special exception to the GPL can be applied should you wish to distribute
    a combined work that includes ChibiOS/RT, without being obliged to provide
    the source code for any proprietary components. See the file exception.txt
    for full details of how and when the exception can be applied.
*/

/**
 * @defgroup MSP430 MSP430
 * @details MSP430 port for the GCC compiler.
 *
 * @section MSP430_INTRO Introduction
 * This port supports all the cores implementing the MSP430 architecture.
 *
 * @section MSP430_STATES Mapping of the System States in the MSP430 port
 * The ChibiOS/RT logical @ref system_states are mapped as follow in the MSP430
 * port:
 * - <b>Init</b>. This state is represented by the startup code and the
 *   initialization code before @p chSysInit() is executed. It has not a
 *   special hardware state associated.
 * - <b>Normal</b>. This is the state the system has after executing
 *   @p chSysInit(). Interrupts are enabled.
 * - <b>Suspended</b>. Interrupts are disabled.
 * - <b>Disabled</b>. Interrupts are disabled. This state is equivalent to the
 *   Suspended state because there are no fast interrupts in this architecture.
 * - <b>Sleep</b>. Not yet implemented.
 * - <b>S-Locked</b>. Interrupts are disabled.
 * - <b>I-Locked</b>. This state is equivalent to the SRI state, the
 *   @p chSysLockI() and @p chSysUnlockI() APIs do nothing (still use them in
 *   order to formally change state because this may change).
 * - <b>Serving Regular Interrupt</b>. Normal interrupt service code.
 * - <b>Serving Fast Interrupt</b>. Not present in this architecture.
 * - <b>Serving Non-Maskable Interrupt</b>. The MSP430 has several non
 *   maskable interrupt sources that can be associated to this state.
 * - <b>Halted</b>. Implemented as an infinite loop with interrupts disabled.
 * .
 * @section MSP430_NOTES The MSP430 port notes
 * - The MSP430 does not have a dedicated interrupt stack, make sure to reserve
 *   enough stack space for interrupts in each thread stack. This can be done
 *   by modifying the @p INT_REQUIRED_STACK configuration options.
 * - The state of the hardware multiplier is not saved in the thread context,
 *   make sure to use it in <b>Suspended</b> state (interrupts masked).
 * - The port code does not define the switch to a low power mode for the
 *   idle thread because the MSP430 has several low power modes. You can
 *   select the proper low power mode for you application by defining the
 *   macro @p port_wait_for_interrupt().
 * .
 * @ingroup gcc
 */

/**
 * @defgroup MSP430_CONF Configuration Options
 * @details MSP430 Configuration Options. The MSP430 port allows some
 * architecture-specific configurations settings that can be overridden
 * by redefining them in @p chconf.h. Usually there is no need to change
 * the default values.
 * - @p INT_REQUIRED_STACK, this value represent the amount of stack space
 *   used by the interrupt handlers.<br>
 *   The default for this value is @p 32, this space is allocated for each
 *   thread so be careful in order to not waste precious RAM space.
 * - @p IDLE_THREAD_STACK_SIZE, stack area size to be assigned to the IDLE
 *   thread. Usually there is no need to change this value unless inserting
 *   code in the IDLE thread hook macro.
 * .
 * @ingroup MSP430
 */

/**
 * @defgroup MSP430_CORE Core Port Implementation
 * @details MSP430 specific port code, structures and macros.
 *
 * @ingroup MSP430
 */

 /**
 * @defgroup MSP430_STARTUP Startup Support
 * @details ChibiOS/RT doed not provide startup files for the MSP430, there
 * are no special startup requirement so the normal toolchain-provided
 * startup files can be used.
 *
 * @ingroup MSP430
 */