mayhem-firmware/firmware/application/main.cpp

/*
 * Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
 * Copyright (C) 2016 Furrtek
 *
 * This file is part of PortaPack.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */

// Color bitmaps generated with:
// Gimp image > indexed colors (16), then "xxd -i *.bmp"

// Note about available RAM:
// Check what ends up in the BSS section by looking at the map files !
// Use constexpr where possible or make sure const are in .cpp files, not headers !

// Note about messages:
// There can only be one message handler for one kind of message at once
// If an attempt is made to register a second handler, there's a chDbgPanic "MsgDblReg"

// Note about matched filters: see proc_sonde.hpp

// TEST: Goertzel tone detect
// TEST: Menuview refresh, seems to blink a lot
// TEST: Check AFSK transmit end, skips last bits ?
// TEST: Imperial in whipcalc

// BUG: Console lock-up if first string to be printed starts with escape character ?
// BUG: (Workaround ok) CPLD-related rx ok, tx bad, see portapack.cpp lines 214+ to disable CPLD overlay
// BUG: SCANNER Lock on frequency, if frequency jump, still locked on first one
// BUG: SCANNER Multiple slices
// GLITCH: The about view scroller sometimes misses lines because of a race condition between the display scrolling and drawing the line
// GLITCH: Start of tx using ReplayThread plays a small bit of previous transmission (content of 1 buffer ?)
//	See fifo.reset_in() ?

// FIXED: Update button in signal gen doesn't work for shape change
// BUG: Signal gen noise shape doesn't work
// TODO: Continue acars receiver. See matched filter, probably doesn't shift the spectrum correctly
// TODO: Add larger description text field in frequency load, under menuview
// TODO: Allow apps to select a preferred FREQMAN file
// TODO: Make play button larger in Replay
// TODO: Add default headphones volume setting in Audio settings
// TODO: Put LNA and VGA controls in Soundboard
// TODO: Make CTCSS display only when squelch is opened
// TODO: DCS decoder
// TODO: Increase resolution of audio FFT view ? Currently 48k/(256/2) (375Hz) because of the use of real values (half of FFT output)
// TODO: Move Touchtunes remote to Custom remote
// TODO: Use escapes \x1B to set colors in text, it works !
// TODO: Open files in File Manager
// TODO: Ask for filename after record
// TODO: Super simple text file viewer
// TODO: Clean up ReplayThread
// TODO: Cap Wav viewer position
// TODO: Adapt wav viewer position step
// TODO: Use unit_auto_scale
// TODO: Remove make_bistream from encoders.cpp, too complex, stinks. bitstream_append should be enough.
// TODO: Continue work on proc_afskrx_corr, see python script (it works !)
// TODO: De bruijn sequence scanner for encoders
// TODO: FILEMAN Move files
// TODO: Use separate thread for scanning in EPAR TX
// TODO: Make freqman refresh simpler (use previous black rectangle method)
// TODO: Merge AFSK and TONES procs ?
// TODO: NFM RX mode: nav.pop on squelch
// TODO: MORSE use prosigns
// TODO: MORSE live keying mode
// TODO: Use to_string_short_freq wherever possible
// TODO: SCANNER Waveform widget as FFT view ?
// TODO: Optimize (and group ?) CTCSS tone gen code
/*
Continuous (Fox-oring)
12s transmit, 48s space (Sprint 1/5th)
60s transmit, 240s space (Classic 1/5 min)
60s transmit, 360s space (Classic 1/7 min)
*/
// TODO: FreqMan: Remove and rename categories
// TODO: Mousejack ?
// TODO: Move frequencykeypad from ui_receiver to ui_widget (used everywhere)
// TODO: ADS-B draw trajectory + GPS coordinates + scale, and playback
// TODO: RDS multiple groups (sequence)
// TODO: Use ModalMessageView confirmation for TX ?
// TODO: Use msgpack for settings, lists... on sd card

// Multimon-style stuff:
// TODO: DMR detector
// TODO: GSM channel detector
// TODO: Setup: Play dead by default ? Enable/disable ?

// Old or low-priority stuff:
// TODO: Bodet :)
// TODO: Analog TV tx with camcorder font character generator
// TODO: Scan for OOK TX
// TODO: Check more OOK encoders
// BUG (fixed ?): No audio in about when shown second time
// TODO: Show MD5 mismatches for modules not found, etc...
// BUG: Description doesn't show up first time going to system>module info (UI drawn on top)
// TODO: Two players tic-tac-toe
// TODO: Analog TV pong game

#include "ch.h"

#include "portapack.hpp"
#include "portapack_shared_memory.hpp"
#include "config_mode.hpp"

#include "message_queue.hpp"

#include "ui.hpp"
#include "ui_widget.hpp"
#include "ui_painter.hpp"
#include "ui_navigation.hpp"

#include "irq_lcd_frame.hpp"
#include "irq_controls.hpp"
#include "irq_rtc.hpp"

#include "event_m0.hpp"

#include "core_control.hpp"
#include "spi_image.hpp"

#include "debug.hpp"
#include "led.hpp"

#include "gcc.hpp"

#include "sd_card.hpp"

#include <string.h>
#include "i2cdevmanager.hpp"

#include "rffc507x.hpp" /* c/m, avoiding initial short ON Ant_DC_Bias pulse, from cold reset  */
rffc507x::RFFC507x first_if;
ui::SystemView* system_view_ptr;

static void event_loop() {
    static ui::Context context;
    static ui::SystemView system_view{
        context,
        portapack::display.screen_rect()};

    system_view_ptr = &system_view;

    EventDispatcher event_dispatcher{&system_view, context};
    static MessageHandlerRegistration message_handler_display_sleep{
        Message::ID::DisplaySleep,
        [&event_dispatcher](const Message* const) {
            event_dispatcher.set_display_sleep(true);
        }};
    portapack::setEventDispatcherToUSBSerial(&event_dispatcher);
    i2cdev::I2CDevManager::setEventDispatcher(&event_dispatcher);
    system_view.get_navigation_view()->handle_autostart();
    event_dispatcher.run();
}

int main(void) {
    first_if.init(); /* To avoid initial short Ant_DC_Bias pulse ,we need quick set up GP01_RFF507X =1 */

    if (config_mode_should_enter()) {
        config_mode_clear();
        config_mode_run();
    }

    config_mode_set();

    switch (portapack::init()) {
        case portapack::init_status_t::INIT_HACKRF_CPLD_FAILED:
            portapack::init_error = "HACKRF CPLD FAILED";
            [[fallthrough]];

        case portapack::init_status_t::INIT_SUCCESS:

            config_mode_clear();

            lcd_frame_sync_configure();
            rtc_interrupt_enable();

            Theme::SetTheme((Theme::ThemeId)portapack::persistent_memory::ui_theme_id());  // load theme

            event_loop();

            sdcDisconnect(&SDCD1);
            sdcStop(&SDCD1);

            portapack::shutdown();
            break;

        case portapack::init_status_t::INIT_NO_PORTAPACK:
        case portapack::init_status_t::INIT_PORTAPACK_CPLD_FAILED:
            config_mode_clear();
            break;
    }

    m4_init(portapack::spi_flash::image_tag_hackrf, portapack::memory::map::m4_code_hackrf, true);
    m0_halt();

    return 0;
}