TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-12-15 04:28:10 +00:00
Code Issues Packages Projects Releases Wiki Activity
58e731c56e
mayhem-firmware/firmware/chibios/os/hal/platforms/STM32/sdc_lld.c

792 lines
23 KiB
C
Executable File
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/sdc_lld.c
* @brief STM32 SDC subsystem low level driver source.
*
* @addtogroup SDC
* @{
*/
/*
TODO: Try preerase blocks before writing (ACMD23).
*/
#include <string.h>
#include "ch.h"
#include "hal.h"
#if HAL_USE_SDC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
#define DMA_CHANNEL \
STM32_DMA_GETCHANNEL(STM32_SDC_SDIO_DMA_STREAM, \
STM32_SDC_SDIO_DMA_CHN)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief SDCD1 driver identifier.*/
SDCDriver SDCD1;
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
#if STM32_SDC_SDIO_UNALIGNED_SUPPORT
/**
* @brief Buffer for temporary storage during unaligned transfers.
*/
static union {
uint32_t alignment;
uint8_t buf[MMCSD_BLOCK_SIZE];
} u;
#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Prepares card to handle read transaction.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[in] n number of blocks to read
* @param[in] resp pointer to the response buffer
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
static bool_t sdc_lld_prepare_read(SDCDriver *sdcp, uint32_t startblk,
uint32_t n, uint32_t *resp) {
/* Driver handles data in 512 bytes blocks (just like HC cards). But if we
have not HC card than we must convert address from blocks to bytes.*/
if (!(sdcp->cardmode & SDC_MODE_HIGH_CAPACITY))
startblk *= MMCSD_BLOCK_SIZE;
if (n > 1) {
/* Send read multiple blocks command to card.*/
if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_READ_MULTIPLE_BLOCK,
startblk, resp) || MMCSD_R1_ERROR(resp[0]))
return CH_FAILED;
}
else{
/* Send read single block command.*/
if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_READ_SINGLE_BLOCK,
startblk, resp) || MMCSD_R1_ERROR(resp[0]))
return CH_FAILED;
}
return CH_SUCCESS;
}
/**
* @brief Prepares card to handle write transaction.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[in] n number of blocks to write
* @param[in] resp pointer to the response buffer
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
static bool_t sdc_lld_prepare_write(SDCDriver *sdcp, uint32_t startblk,
uint32_t n, uint32_t *resp) {
/* Driver handles data in 512 bytes blocks (just like HC cards). But if we
have not HC card than we must convert address from blocks to bytes.*/
if (!(sdcp->cardmode & SDC_MODE_HIGH_CAPACITY))
startblk *= MMCSD_BLOCK_SIZE;
if (n > 1) {
/* Write multiple blocks command.*/
if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_WRITE_MULTIPLE_BLOCK,
startblk, resp) || MMCSD_R1_ERROR(resp[0]))
return CH_FAILED;
}
else{
/* Write single block command.*/
if (sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_WRITE_BLOCK,
startblk, resp) || MMCSD_R1_ERROR(resp[0]))
return CH_FAILED;
}
return CH_SUCCESS;
}
/**
* @brief Wait end of data transaction and performs finalizations.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] n number of blocks in transaction
* @param[in] resp pointer to the response buffer
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*/
static bool_t sdc_lld_wait_transaction_end(SDCDriver *sdcp, uint32_t n,
uint32_t *resp) {
/* Note the mask is checked before going to sleep because the interrupt
may have occurred before reaching the critical zone.*/
chSysLock();
if (SDIO->MASK != 0) {
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_start_data_transaction(), #1", "not NULL");
sdcp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_start_data_transaction(), #2", "not NULL");
}
if ((SDIO->STA & SDIO_STA_DATAEND) == 0) {
chSysUnlock();
return CH_FAILED;
}
#if (defined(STM32F4XX) || defined(STM32F2XX))
/* Wait until DMA channel enabled to be sure that all data transferred.*/
while (sdcp->dma->stream->CR & STM32_DMA_CR_EN)
;
/* DMA event flags must be manually cleared.*/
dmaStreamClearInterrupt(sdcp->dma);
SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
SDIO->DCTRL = 0;
chSysUnlock();
/* Wait until interrupt flags to be cleared.*/
/*while (((DMA2->LISR) >> (sdcp->dma->ishift)) & STM32_DMA_ISR_TCIF)
dmaStreamClearInterrupt(sdcp->dma);*/
#else
/* Waits for transfer completion at DMA level, the the stream is
disabled and cleared.*/
dmaWaitCompletion(sdcp->dma);
SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
SDIO->DCTRL = 0;
chSysUnlock();
#endif
/* Finalize transaction.*/
if (n > 1)
return sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_STOP_TRANSMISSION, 0, resp);
return CH_SUCCESS;
}
/**
* @brief Gets SDC errors.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] sta value of the STA register
*
* @notapi
*/
static void sdc_lld_collect_errors(SDCDriver *sdcp, uint32_t sta) {
uint32_t errors = SDC_NO_ERROR;
if (sta & SDIO_STA_CCRCFAIL)
errors |= SDC_CMD_CRC_ERROR;
if (sta & SDIO_STA_DCRCFAIL)
errors |= SDC_DATA_CRC_ERROR;
if (sta & SDIO_STA_CTIMEOUT)
errors |= SDC_COMMAND_TIMEOUT;
if (sta & SDIO_STA_DTIMEOUT)
errors |= SDC_DATA_TIMEOUT;
if (sta & SDIO_STA_TXUNDERR)
errors |= SDC_TX_UNDERRUN;
if (sta & SDIO_STA_RXOVERR)
errors |= SDC_RX_OVERRUN;
if (sta & SDIO_STA_STBITERR)
errors |= SDC_STARTBIT_ERROR;
sdcp->errors |= errors;
}
/**
* @brief Performs clean transaction stopping in case of errors.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] n number of blocks in transaction
* @param[in] resp pointer to the response buffer
*
* @notapi
*/
static void sdc_lld_error_cleanup(SDCDriver *sdcp,
uint32_t n,
uint32_t *resp) {
uint32_t sta = SDIO->STA;
dmaStreamClearInterrupt(sdcp->dma);
dmaStreamDisable(sdcp->dma);
SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
SDIO->MASK = 0;
SDIO->DCTRL = 0;
sdc_lld_collect_errors(sdcp, sta);
if (n > 1)
sdc_lld_send_cmd_short_crc(sdcp, MMCSD_CMD_STOP_TRANSMISSION, 0, resp);
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if !defined(STM32_SDIO_HANDLER)
#error "STM32_SDIO_HANDLER not defined"
#endif
/**
* @brief SDIO IRQ handler.
* @details It just wakes transaction thread. All error handling performs in
* that thread.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_SDIO_HANDLER) {
CH_IRQ_PROLOGUE();
chSysLockFromIsr()
/* Disables the source but the status flags are not reset because the
read/write functions needs to check them.*/
SDIO->MASK = 0;
if (SDCD1.thread != NULL) {
chSchReadyI(SDCD1.thread);
SDCD1.thread = NULL;
}
chSysUnlockFromIsr();
CH_IRQ_EPILOGUE();
}
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level SDC driver initialization.
*
* @notapi
*/
void sdc_lld_init(void) {
sdcObjectInit(&SDCD1);
SDCD1.thread = NULL;
SDCD1.dma = STM32_DMA_STREAM(STM32_SDC_SDIO_DMA_STREAM);
#if CH_DBG_ENABLE_ASSERTS
SDCD1.sdio = SDIO;
#endif
}
/**
* @brief Configures and activates the SDC peripheral.
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_start(SDCDriver *sdcp) {
sdcp->dmamode = STM32_DMA_CR_CHSEL(DMA_CHANNEL) |
STM32_DMA_CR_PL(STM32_SDC_SDIO_DMA_PRIORITY) |
STM32_DMA_CR_PSIZE_WORD |
STM32_DMA_CR_MSIZE_WORD |
STM32_DMA_CR_MINC;
#if (defined(STM32F4XX) || defined(STM32F2XX))
sdcp->dmamode |= STM32_DMA_CR_PFCTRL |
STM32_DMA_CR_PBURST_INCR4 |
STM32_DMA_CR_MBURST_INCR4;
#endif
if (sdcp->state == BLK_STOP) {
/* Note, the DMA must be enabled before the IRQs.*/
bool_t b;
b = dmaStreamAllocate(sdcp->dma, STM32_SDC_SDIO_IRQ_PRIORITY, NULL, NULL);
chDbgAssert(!b, "sdc_lld_start(), #1", "stream already allocated");
dmaStreamSetPeripheral(sdcp->dma, &SDIO->FIFO);
#if (defined(STM32F4XX) || defined(STM32F2XX))
dmaStreamSetFIFO(sdcp->dma, STM32_DMA_FCR_DMDIS | STM32_DMA_FCR_FTH_FULL);
#endif
nvicEnableVector(STM32_SDIO_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SDC_SDIO_IRQ_PRIORITY));
rccEnableSDIO(FALSE);
}
/* Configuration, card clock is initially stopped.*/
SDIO->POWER = 0;
SDIO->CLKCR = 0;
SDIO->DCTRL = 0;
SDIO->DTIMER = 0;
}
/**
* @brief Deactivates the SDC peripheral.
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_stop(SDCDriver *sdcp) {
if (sdcp->state != BLK_STOP) {
/* SDIO deactivation.*/
SDIO->POWER = 0;
SDIO->CLKCR = 0;
SDIO->DCTRL = 0;
SDIO->DTIMER = 0;
/* Clock deactivation.*/
nvicDisableVector(STM32_SDIO_NUMBER);
dmaStreamRelease(sdcp->dma);
rccDisableSDIO(FALSE);
}
}
/**
* @brief Starts the SDIO clock and sets it to init mode (400kHz or less).
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_start_clk(SDCDriver *sdcp) {
(void)sdcp;
/* Initial clock setting: 400kHz, 1bit mode.*/
SDIO->CLKCR = STM32_SDIO_DIV_LS;
SDIO->POWER |= SDIO_POWER_PWRCTRL_0 | SDIO_POWER_PWRCTRL_1;
SDIO->CLKCR |= SDIO_CLKCR_CLKEN;
/* Clock activation delay.*/
chThdSleepMilliseconds(STM32_SDC_CLOCK_ACTIVATION_DELAY);
}
/**
* @brief Sets the SDIO clock to data mode (25MHz or less).
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_set_data_clk(SDCDriver *sdcp) {
(void)sdcp;
SDIO->CLKCR = (SDIO->CLKCR & 0xFFFFFF00) | STM32_SDIO_DIV_HS;
}
/**
* @brief Stops the SDIO clock.
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_stop_clk(SDCDriver *sdcp) {
(void)sdcp;
SDIO->CLKCR = 0;
SDIO->POWER = 0;
}
/**
* @brief Switches the bus to 4 bits mode.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] mode bus mode
*
* @notapi
*/
void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode) {
uint32_t clk = SDIO->CLKCR & ~SDIO_CLKCR_WIDBUS;
(void)sdcp;
switch (mode) {
case SDC_MODE_1BIT:
SDIO->CLKCR = clk;
break;
case SDC_MODE_4BIT:
SDIO->CLKCR = clk | SDIO_CLKCR_WIDBUS_0;
break;
case SDC_MODE_8BIT:
SDIO->CLKCR = clk | SDIO_CLKCR_WIDBUS_1;
break;
}
}
/**
* @brief Sends an SDIO command with no response expected.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
*
* @notapi
*/
void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg) {
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_CPSMEN;
while ((SDIO->STA & SDIO_STA_CMDSENT) == 0)
;
SDIO->ICR = SDIO_ICR_CMDSENTC;
}
/**
* @brief Sends an SDIO command with a short response expected.
* @note The CRC is not verified.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
* @param[out] resp pointer to the response buffer (one word)
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp) {
uint32_t sta;
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_CPSMEN;
while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
SDIO_STA_CCRCFAIL)) == 0)
;
SDIO->ICR = sta & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL);
if ((sta & (SDIO_STA_CTIMEOUT)) != 0) {
sdc_lld_collect_errors(sdcp, sta);
return CH_FAILED;
}
*resp = SDIO->RESP1;
return CH_SUCCESS;
}
/**
* @brief Sends an SDIO command with a short response expected and CRC.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
* @param[out] resp pointer to the response buffer (one word)
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp) {
uint32_t sta;
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_CPSMEN;
while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
SDIO_STA_CCRCFAIL)) == 0)
;
SDIO->ICR = sta & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL);
if ((sta & (SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL)) != 0) {
sdc_lld_collect_errors(sdcp, sta);
return CH_FAILED;
}
*resp = SDIO->RESP1;
return CH_SUCCESS;
}
/**
* @brief Sends an SDIO command with a long response expected and CRC.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
* @param[out] resp pointer to the response buffer (four words)
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp) {
uint32_t sta;
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_WAITRESP_1 |
SDIO_CMD_CPSMEN;
while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
SDIO_STA_CCRCFAIL)) == 0)
;
SDIO->ICR = sta & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL);
if ((sta & (STM32_SDIO_STA_ERROR_MASK)) != 0) {
sdc_lld_collect_errors(sdcp, sta);
return CH_FAILED;
}
/* Save bytes in reverse order because MSB in response comes first.*/
*resp++ = SDIO->RESP4;
*resp++ = SDIO->RESP3;
*resp++ = SDIO->RESP2;
*resp = SDIO->RESP1;
return CH_SUCCESS;
}
/**
* @brief Reads one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[out] buf pointer to the read buffer
* @param[in] n number of blocks to read
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_read_aligned(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf, uint32_t n) {
uint32_t resp[1];
chDbgCheck((n < (0x1000000 / MMCSD_BLOCK_SIZE)), "max transaction size");
SDIO->DTIMER = STM32_SDC_READ_TIMEOUT;
/* Checks for errors and waits for the card to be ready for reading.*/
if (_sdc_wait_for_transfer_state(sdcp))
return CH_FAILED;
/* Prepares the DMA channel for writing.*/
dmaStreamSetMemory0(sdcp->dma, buf);
dmaStreamSetTransactionSize(sdcp->dma,
(n * MMCSD_BLOCK_SIZE) / sizeof (uint32_t));
dmaStreamSetMode(sdcp->dma, sdcp->dmamode | STM32_DMA_CR_DIR_P2M);
dmaStreamEnable(sdcp->dma);
/* Setting up data transfer.*/
SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
SDIO->MASK = SDIO_MASK_DCRCFAILIE |
SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_STBITERRIE |
SDIO_MASK_RXOVERRIE |
SDIO_MASK_DATAENDIE;
SDIO->DLEN = n * MMCSD_BLOCK_SIZE;
/* Transaction starts just after DTEN bit setting.*/
SDIO->DCTRL = SDIO_DCTRL_DTDIR |
SDIO_DCTRL_DBLOCKSIZE_3 |
SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
/* Talk to card what we want from it.*/
if (sdc_lld_prepare_read(sdcp, startblk, n, resp) == TRUE)
goto error;
if (sdc_lld_wait_transaction_end(sdcp, n, resp) == TRUE)
goto error;
return CH_SUCCESS;
error:
sdc_lld_error_cleanup(sdcp, n, resp);
return CH_FAILED;
}
/**
* @brief Writes one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to write
* @param[out] buf pointer to the write buffer
* @param[in] n number of blocks to write
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_write_aligned(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf, uint32_t n) {
uint32_t resp[1];
chDbgCheck((n < (0x1000000 / MMCSD_BLOCK_SIZE)), "max transaction size");
SDIO->DTIMER = STM32_SDC_WRITE_TIMEOUT;
/* Checks for errors and waits for the card to be ready for writing.*/
if (_sdc_wait_for_transfer_state(sdcp))
return CH_FAILED;
/* Prepares the DMA channel for writing.*/
dmaStreamSetMemory0(sdcp->dma, buf);
dmaStreamSetTransactionSize(sdcp->dma,
(n * MMCSD_BLOCK_SIZE) / sizeof (uint32_t));
dmaStreamSetMode(sdcp->dma, sdcp->dmamode | STM32_DMA_CR_DIR_M2P);
dmaStreamEnable(sdcp->dma);
/* Setting up data transfer.*/
SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
SDIO->MASK = SDIO_MASK_DCRCFAILIE |
SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_STBITERRIE |
SDIO_MASK_TXUNDERRIE |
SDIO_MASK_DATAENDIE;
SDIO->DLEN = n * MMCSD_BLOCK_SIZE;
/* Talk to card what we want from it.*/
if (sdc_lld_prepare_write(sdcp, startblk, n, resp) == TRUE)
goto error;
/* Transaction starts just after DTEN bit setting.*/
SDIO->DCTRL = SDIO_DCTRL_DBLOCKSIZE_3 |
SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
if (sdc_lld_wait_transaction_end(sdcp, n, resp) == TRUE)
goto error;
return CH_SUCCESS;
error:
sdc_lld_error_cleanup(sdcp, n, resp);
return CH_FAILED;
}
/**
* @brief Reads one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[out] buf pointer to the read buffer
* @param[in] n number of blocks to read
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf, uint32_t n) {
#if STM32_SDC_SDIO_UNALIGNED_SUPPORT
if (((unsigned)buf & 3) != 0) {
uint32_t i;
for (i = 0; i < n; i++) {
if (sdc_lld_read_aligned(sdcp, startblk, u.buf, 1))
return CH_FAILED;
memcpy(buf, u.buf, MMCSD_BLOCK_SIZE);
buf += MMCSD_BLOCK_SIZE;
startblk++;
}
return CH_SUCCESS;
}
#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */
return sdc_lld_read_aligned(sdcp, startblk, buf, n);
}
/**
* @brief Writes one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to write
* @param[out] buf pointer to the write buffer
* @param[in] n number of blocks to write
*
* @return The operation status.
* @retval CH_SUCCESS operation succeeded.
* @retval CH_FAILED operation failed.
*
* @notapi
*/
bool_t sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf, uint32_t n) {
#if STM32_SDC_SDIO_UNALIGNED_SUPPORT
if (((unsigned)buf & 3) != 0) {
uint32_t i;
for (i = 0; i < n; i++) {
memcpy(u.buf, buf, MMCSD_BLOCK_SIZE);
buf += MMCSD_BLOCK_SIZE;
if (sdc_lld_write_aligned(sdcp, startblk, u.buf, 1))
return CH_FAILED;
startblk++;
}
return CH_SUCCESS;
}
#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */
return sdc_lld_write_aligned(sdcp, startblk, buf, n);
}
/**
* @brief Waits for card idle condition.
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @return The operation status.
* @retval CH_SUCCESS the operation succeeded.
* @retval CH_FAILED the operation failed.
*
* @api
*/
bool_t sdc_lld_sync(SDCDriver *sdcp) {
/* TODO: Implement.*/
(void)sdcp;
return CH_SUCCESS;
}
#endif /* HAL_USE_SDC */
/** @} */
Reference in New Issue View Git Blame Copy Permalink