mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-12-14 20:18:13 +00:00
fcec6d6100
Minor changes were made between this version and the final version. This earlier version is available via Shapeways, at https://www.shapeways.com/product/EGG3EWPAY/portapack-h1-case-round-20150410-0945 Addresses issue #30.
847 lines
22 KiB
OpenSCAD
847 lines
22 KiB
OpenSCAD
include <pp_h1_parameters.scad>
|
|
|
|
$fs=0.1;
|
|
|
|
module pcb_mounting_hole_drill() {
|
|
circle(r=pcb_hole_r);
|
|
}
|
|
|
|
module pcb_mounting_hole_drills() {
|
|
translate([ 64, 104]) pcb_mounting_hole_drill();
|
|
translate([126, 104]) pcb_mounting_hole_drill();
|
|
translate([176, 104]) pcb_mounting_hole_drill();
|
|
translate([ 64, 171]) pcb_mounting_hole_drill();
|
|
translate([131, 144]) pcb_mounting_hole_drill();
|
|
translate([176, 171]) pcb_mounting_hole_drill();
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module pcb_cutout_antenna_pos() {
|
|
x = 61.5;
|
|
y1 = 154.75;
|
|
y2 = 167.25;
|
|
r = 1.5;
|
|
minkowski() {
|
|
polygon(
|
|
points=[[x+8,y1-4],[x,y1-4],[x,y1],[x+4,y1],[x+4,y2],[x,y2],[x,y2+4],[x+8,y2+4]]
|
|
);
|
|
circle(r=r);
|
|
};
|
|
}
|
|
|
|
module pcb_cutout_antenna_neg_curve() {
|
|
x = 59.5;
|
|
y1 = 157;
|
|
y2 = 165;
|
|
r = 1.5;
|
|
minkowski() {
|
|
polygon(
|
|
points=[[x-2,y1],[x,y1],[x,y2],[x-2,y2]]
|
|
);
|
|
circle(r=r);
|
|
};
|
|
}
|
|
|
|
module pcb_cutout_antenna_neg() {
|
|
x = 60.5;
|
|
y1 = 157;
|
|
y2 = 165;
|
|
w = -4;
|
|
union() {
|
|
polygon(
|
|
points=[[x+w,y1-3],[x,y1-3],[x,y2+3],[x+w,y2+3]]
|
|
);
|
|
pcb_cutout_antenna_neg_curve();
|
|
}
|
|
}
|
|
|
|
module pcb_cutout_antenna() {
|
|
difference() {
|
|
pcb_cutout_antenna_neg();
|
|
pcb_cutout_antenna_pos();
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module pcb_cutout_clocks_pos() {
|
|
x = 178.5;
|
|
y1 = 138.75;
|
|
y2 = 169.25;
|
|
r = 1.5;
|
|
w = 8;
|
|
w2 = 4;
|
|
minkowski() {
|
|
polygon(
|
|
points=[[x-w,y1-4],[x,y1-4],[x,y1],[x-w2,y1],[x-w2,y2],[x,y2],[x,y2+4],[x-w,y2+4]]
|
|
);
|
|
circle(r=r);
|
|
};
|
|
}
|
|
|
|
module pcb_cutout_clock_neg_curve() {
|
|
x = 180.5;
|
|
y1 = 141;
|
|
y2 = 167;
|
|
r = 1.5;
|
|
w = 2;
|
|
minkowski() {
|
|
polygon(
|
|
points=[[x,y1],[x+w,y1],[x+w,y2],[x,y2]]
|
|
);
|
|
circle(r=r);
|
|
};
|
|
}
|
|
|
|
module pcb_cutout_clocks_neg() {
|
|
x = 179.5;
|
|
y1 = 141;
|
|
y2 = 167;
|
|
w = 6;
|
|
union() {
|
|
polygon(
|
|
points=[[x,y1-3],[x+w,y1-3],[x+w,y2+3],[x,y2+3]]
|
|
);
|
|
pcb_cutout_clock_neg_curve();
|
|
}
|
|
}
|
|
|
|
module pcb_cutout_clocks() {
|
|
difference() {
|
|
pcb_cutout_clocks_neg();
|
|
pcb_cutout_clocks_pos();
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
bulkhead_w = 6.35;
|
|
bulkhead_h = 6.35;
|
|
bulkhead_thickness = 1.02;
|
|
|
|
barrel_d = 6.2;
|
|
barrel_clip_d = 5.5;
|
|
barrel_l = 12.45 - bulkhead_thickness;
|
|
|
|
barrel_r = barrel_d / 2;
|
|
barrel_clip_r = barrel_clip_d / 2;
|
|
|
|
peg_l = 3.81;
|
|
peg_w = 1.02;
|
|
peg_bottom_h = 0.76;
|
|
peg_top_h = 1.27;
|
|
peg_space = 1.78;
|
|
|
|
module sma_73251_2120_pegs() {
|
|
peg_top_ty = bulkhead_h/2 - peg_bottom_h - peg_space - peg_top_h;
|
|
linear_extrude(height=peg_l)
|
|
{
|
|
translate([-bulkhead_w/2, peg_top_ty])
|
|
square([peg_w, peg_top_h]);
|
|
translate([bulkhead_w/2 - peg_w, peg_top_ty])
|
|
square([peg_w, peg_top_h]);
|
|
translate([-bulkhead_w/2, bulkhead_h/2 - peg_bottom_h])
|
|
square([peg_w, peg_bottom_h]);
|
|
translate([bulkhead_w/2 - peg_w, bulkhead_h/2 - peg_bottom_h])
|
|
square([peg_w, peg_bottom_h]);
|
|
}
|
|
}
|
|
|
|
module sma_73251_2120_barrel_outline_circle() {
|
|
circle(r=barrel_r);
|
|
}
|
|
|
|
module sma_73251_2120_barrel_outline() {
|
|
intersection() {
|
|
sma_73251_2120_barrel_outline_circle();
|
|
square([barrel_clip_d, barrel_d + 1], center=true);
|
|
}
|
|
}
|
|
|
|
module sma_73251_2120_barrel() {
|
|
linear_extrude(height=barrel_l) {
|
|
sma_73251_2120_barrel_outline();
|
|
}
|
|
}
|
|
|
|
module sma_73251_2120_bulkhead() {
|
|
linear_extrude(height=bulkhead_thickness) {
|
|
square([bulkhead_w, bulkhead_h], center=true);
|
|
}
|
|
}
|
|
|
|
module sma_73251_2120_union() {
|
|
union() {
|
|
translate([0, 0, -peg_l]) sma_73251_2120_pegs();
|
|
sma_73251_2120_bulkhead();
|
|
translate([0, 0, bulkhead_thickness]) sma_73251_2120_barrel();
|
|
}
|
|
}
|
|
/*
|
|
module sma_73251_2120() {
|
|
ty = bulkhead_h/2 - peg_bottom_h - peg_space/2;
|
|
rotate([90, 0, 0]) translate([0, -ty, 0]) {
|
|
union() {
|
|
translate([0, 0, -peg_l]) sma_73251_2120_pegs();
|
|
sma_73251_2120_bulkhead();
|
|
translate([0, 0, bulkhead_thickness]) sma_73251_2120_barrel();
|
|
}
|
|
}
|
|
}
|
|
*/
|
|
module sma_73251_2120_orient(board_thickness) {
|
|
// Align so that top surface of bottom peg is at z=0 (bottom of PCB).
|
|
t = peg_top_h / 2 + (peg_space - board_thickness) / 2;
|
|
translate([0, 0, -t]) rotate([90, 0, -90]) {
|
|
children();
|
|
}
|
|
}
|
|
|
|
module sma_73251_2120(refdes, board_thickness) {
|
|
sma_73251_2120_orient(board_thickness) {
|
|
sma_73251_2120_union();
|
|
}
|
|
}
|
|
|
|
module sma_73251_2120_drill(tolerance, board_thickness) {
|
|
sma_73251_2120_orient(board_thickness) {
|
|
linear_extrude(height=30) {
|
|
minkowski() {
|
|
sma_73251_2120_barrel_outline_circle();
|
|
circle(r=tolerance);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module led(refdes, c) {
|
|
rotate(90) translate([-0.25, -2.15/2, -0.60]) {
|
|
color("gray") linear_extrude(height=0.60) {
|
|
square([0.50, 2.15]);
|
|
translate([0, 2.15/2]) circle(r=0.5);
|
|
}
|
|
}
|
|
}
|
|
|
|
module led_drill() {
|
|
hole_diameter = 2;
|
|
|
|
translate([0, -0.25, -0.3]) {
|
|
rotate([90, 0, 0]) {
|
|
cylinder(d=hole_diameter, h=10);
|
|
}
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module sw_outline() {
|
|
circle(d=3.51, center=true);
|
|
}
|
|
|
|
sw_a = 3.25;
|
|
sw_l = 5.85;
|
|
sw_tz = sw_l - sw_a;
|
|
|
|
sw_large_hole_spacing = 7.01;
|
|
sw_large_hole_diameter = 1.30;
|
|
sw_small_hole_spacing = 4.50;
|
|
sw_small_hole_diameter = 0.99;
|
|
sw_large_small_hole_spacing = 2.49;
|
|
sw_pin_length_below_datum = 3.51;
|
|
|
|
sw_button_z_offset = 4.01;
|
|
|
|
module sw() {
|
|
rotate([180, 0, 90]) {
|
|
rotate([90, 0, 0]) {
|
|
translate([0, 4.01, sw_tz]) {
|
|
color("gray") translate([-7.11/2, -sw_button_z_offset, -3.68]) linear_extrude(height=3.68) square([7.11, 7.01]);
|
|
color("blue") linear_extrude(height=sw_a) sw_outline();
|
|
}
|
|
}
|
|
|
|
rotate([180, 0, 180]) linear_extrude(height=sw_pin_length_below_datum) {
|
|
translate([-sw_large_hole_spacing/2, sw_large_small_hole_spacing]) circle(d=sw_large_hole_diameter);
|
|
translate([ sw_large_hole_spacing/2, sw_large_small_hole_spacing]) circle(d=sw_large_hole_diameter);
|
|
translate([-sw_small_hole_spacing/2, 0]) circle(d=sw_small_hole_diameter);
|
|
translate([ sw_small_hole_spacing/2, 0]) circle(d=sw_small_hole_diameter);
|
|
}
|
|
}
|
|
}
|
|
|
|
module sw_drill(clearance) {
|
|
translate([0, 0, -sw_button_z_offset]) {
|
|
rotate([0, -90, 0]) {
|
|
linear_extrude(h=10) {
|
|
minkowski() {
|
|
sw_outline();
|
|
circle(r=clearance);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module header_x2(nx, b) {
|
|
ny = 2;
|
|
|
|
w = 5.08;
|
|
d = 8.50;
|
|
|
|
pin_spacing_x = 2.54;
|
|
pin_spacing_y = 2.54;
|
|
pin_d = 1.02;
|
|
pin_length = 3.2;
|
|
|
|
rotate([180, 0, 0]) {
|
|
color("gray") translate([-b/2, -w/2, 0]) linear_extrude(height=d) square([b, w]);
|
|
|
|
pin_tx = nx * pin_spacing_x / -2;
|
|
pin_ty = ny * pin_spacing_y / -2;
|
|
translate([pin_tx, pin_ty]) {
|
|
for(y = [1 : ny]) {
|
|
for(x = [1 : nx]) {
|
|
tx = (x - 0.5) * pin_spacing_x;
|
|
ty = (y - 0.5) * pin_spacing_y;
|
|
translate([tx, ty]) {
|
|
rotate([180, 0]) {
|
|
linear_extrude(height=pin_length) {
|
|
circle(d=pin_d);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module header_11x2() {
|
|
nx = 11;
|
|
b = 28.44;
|
|
header_x2(nx, b);
|
|
}
|
|
|
|
module header_13x2() {
|
|
nx = 13;
|
|
b = 33.52;
|
|
header_x2(nx, b);
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module usb_plug_poly() {
|
|
inner_w1 = 6.9;
|
|
inner_h1 = 1.1;
|
|
inner_h = 1.85;
|
|
inner_w2 = 5.4;
|
|
inner_dw = inner_w1 - inner_w2;
|
|
|
|
translate([-inner_w1/2, 0])
|
|
polygon(points=[
|
|
[0, 0],
|
|
[inner_w1, 0],
|
|
[inner_w1, inner_h1],
|
|
[inner_w1 - inner_dw/2, inner_h],
|
|
[inner_dw/2, inner_h],
|
|
[0, inner_h1]
|
|
]);
|
|
}
|
|
|
|
module usb_body_outline() {
|
|
body_buffer_r = 0.3;
|
|
|
|
translate([0, body_buffer_r]) {
|
|
minkowski() {
|
|
usb_plug_poly();
|
|
circle(r=body_buffer_r);
|
|
}
|
|
}
|
|
}
|
|
|
|
module usb_plug_outline() {
|
|
outer_h = 3;
|
|
outer_ty = (outer_h - 2.45) / 2;
|
|
outer_buffer_r = 0.6;
|
|
|
|
translate([0, outer_ty]) {
|
|
minkowski() {
|
|
usb_plug_poly();
|
|
circle(r=outer_buffer_r);
|
|
}
|
|
}
|
|
}
|
|
|
|
usb_body_h = 2.45;
|
|
usb_body_depth = 5.0;
|
|
|
|
//usb_outer_w1 = 8;
|
|
usb_outer_depth = 0.63;
|
|
|
|
module usb_transform() {
|
|
rotate([90, 180, 270]) translate([0, 0, -usb_outer_depth - 2.15 + 1.65]) children();
|
|
}
|
|
|
|
module usb() {
|
|
color("lightgray") usb_transform() {
|
|
translate([0, 0, usb_outer_depth]) {
|
|
linear_extrude(height=usb_body_depth) {
|
|
usb_body_outline();
|
|
}
|
|
}
|
|
|
|
linear_extrude(height=usb_outer_depth) {
|
|
usb_plug_outline();
|
|
}
|
|
}
|
|
}
|
|
|
|
module usb_drill(clearance) {
|
|
usb_transform() {
|
|
translate([0, 0, -usb_outer_depth - 10]) {
|
|
linear_extrude(height=20) {
|
|
minkowski() {
|
|
usb_plug_outline();
|
|
circle(r=clearance);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module pcb_outline() {
|
|
minkowski() {
|
|
polygon(
|
|
points=[[64,104], [176,104], [176,171], [64,171]]
|
|
);
|
|
circle(r=pcb_corner_r);
|
|
}
|
|
}
|
|
|
|
module pcb_shape() {
|
|
difference() {
|
|
pcb_outline();
|
|
pcb_cutout_antenna();
|
|
pcb_cutout_clocks();
|
|
pcb_mounting_hole_drills();
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module hackrf_one_components() {
|
|
color("green") linear_extrude(height=h1_pcb_thickness) pcb_shape();
|
|
|
|
translate([ 61.00, 161.00]) rotate( 0) sma_73251_2120("p4" , h1_pcb_thickness);
|
|
translate([179.00, 145.00]) rotate(180) sma_73251_2120("p2" , h1_pcb_thickness);
|
|
translate([179.00, 163.00]) rotate(180) sma_73251_2120("p16", h1_pcb_thickness);
|
|
|
|
translate([ 61.00, 117.90]) rotate(-90) led("d7", "green");
|
|
translate([ 61.27, 130.55]) rotate(-90) led("d8", "yellow");
|
|
translate([ 61.27, 135.12]) rotate(-90) led("d2", "red");
|
|
translate([ 61.27, 139.69]) rotate(-90) led("d4", "green");
|
|
translate([ 61.27, 144.27]) rotate(-90) led("d5", "yellow");
|
|
translate([ 61.27, 148.84]) rotate(-90) led("d6", "red");
|
|
|
|
translate([ 62.70, 111.40]) sw();
|
|
translate([ 62.70, 124.40]) sw();
|
|
|
|
translate([171.76, 143.25]) rotate([0, 0, 90]) header_11x2("p20");
|
|
translate([152.71, 164.84]) rotate([0, 0, 180]) header_13x2("p22");
|
|
translate([123.50, 143.25]) rotate([0, 0, 90]) header_11x2("p28");
|
|
|
|
translate([180.00, 124.00]) usb();
|
|
}
|
|
|
|
module hackrf_one_transform() {
|
|
rotate([180, 0, 0]) translate([-60, -100 - pcb_w])
|
|
children();
|
|
}
|
|
|
|
module hackrf_one() {
|
|
hackrf_one_transform() hackrf_one_components();
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module spacer() {
|
|
outer_d = 0.25 * 25.4;
|
|
inner_d = 0.140 * 25.4;
|
|
|
|
//inner_d = ?
|
|
rotate([0, 180, 0]) {
|
|
color("lightgray") {
|
|
difference() {
|
|
linear_extrude(height=spacer_height) {
|
|
circle(d=outer_d);
|
|
}
|
|
translate([0, 0, -0.5]) {
|
|
linear_extrude(height=spacer_height + 1) {
|
|
circle(d=inner_d);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module screw() {
|
|
wrench_sides = 6;
|
|
wrench_diameter = 2.0 / cos(360 / wrench_sides / 2);
|
|
|
|
head_height = 2.0;
|
|
head_d = 5.5;
|
|
|
|
shaft_length = 20.0;
|
|
threaded_d = 3.0;
|
|
|
|
color("gray") {
|
|
translate([0, 0, -head_height]) difference() {
|
|
linear_extrude(height=head_height)
|
|
circle(d=head_d);
|
|
translate([0, 0, -0.5]) linear_extrude(height=head_height + 1)
|
|
circle(d=wrench_diameter, $fn=wrench_sides);
|
|
}
|
|
linear_extrude(height=shaft_length)
|
|
circle(d=threaded_d);
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module header_mle_dual(name, nx) {
|
|
w = nx * 2.54;
|
|
h = 5;
|
|
d = 2.54;
|
|
offset = 3.81 - d;
|
|
|
|
base_h = 7.44;
|
|
|
|
translate([-w/2, -h/2, offset]) {
|
|
color("gray") linear_extrude(height=d) square([w, h]);
|
|
}
|
|
translate([-w/2, -base_h/2]) {
|
|
color("lightgray") {
|
|
linear_extrude(height=offset) square([w, base_h]);
|
|
}
|
|
}
|
|
}
|
|
|
|
module lcd_kingtech() {
|
|
body_w = 42.72;
|
|
body_h = 60.26;
|
|
body_d = 2.50;
|
|
|
|
touch_d = 0.7;
|
|
|
|
tape_d = 0.1;
|
|
|
|
view_w = 36.72;
|
|
view_h = 48.96;
|
|
view_tx = (body_w - view_w) / 2;
|
|
view_ty = 1.25 + 2.95;
|
|
|
|
tab_w = 0.7;
|
|
tab_h = 2.5;
|
|
tab_d = 0.9;
|
|
tab_tz = body_d - tab_d;
|
|
tab_bot_ty = body_h - tab_h;
|
|
|
|
translate([-body_w / 2, -view_ty - view_h/2, -(body_d + touch_d)]) {
|
|
translate([0, 0, touch_d]) {
|
|
color("beige") difference() {
|
|
linear_extrude(height=body_d) {
|
|
square([body_w, body_h]);
|
|
}
|
|
|
|
translate([view_tx, view_ty, -1]) {
|
|
linear_extrude(height=2) {
|
|
square([view_w, view_h]);
|
|
}
|
|
}
|
|
}
|
|
|
|
color("beige") translate([0, 0, tab_tz]) {
|
|
linear_extrude(height=tab_d) {
|
|
translate([-tab_w, 0]) square([tab_w, tab_h]);
|
|
translate([-tab_w, tab_bot_ty]) square([tab_w, tab_h]);
|
|
translate([body_w, 0]) square([tab_w, tab_h]);
|
|
translate([body_w, tab_bot_ty]) square([tab_w, tab_h]);
|
|
}
|
|
}
|
|
|
|
color("black") translate([view_tx, view_ty]) {
|
|
linear_extrude(height=1) {
|
|
square([view_w, view_h]);
|
|
}
|
|
}
|
|
}
|
|
|
|
color("lightgray", alpha=0.5) {
|
|
linear_extrude(height=touch_d) {
|
|
square([body_w, body_h]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module control_wheel() {
|
|
h = 6.0;
|
|
|
|
top_d = 32.0;
|
|
top_h = 3.0;
|
|
|
|
ring_d = 34.4;
|
|
ring_h = 0.2;
|
|
|
|
bot_d = ring_d;
|
|
bot_h = h - ring_h - top_h;
|
|
|
|
translate([0, 0, -h])
|
|
color("white")
|
|
linear_extrude(height=top_h)
|
|
circle(d=top_d);
|
|
|
|
translate([0, 0, -(h - top_h)])
|
|
color("white")
|
|
linear_extrude(height=ring_h)
|
|
circle(d=ring_d);
|
|
|
|
translate([0, 0, -(h - top_h - ring_h)])
|
|
color("black")
|
|
linear_extrude(height=bot_h)
|
|
circle(d=bot_d);
|
|
}
|
|
|
|
module audio_jack_hole() {
|
|
hole_outer_d = 5.00;
|
|
|
|
circle(d=hole_outer_d);
|
|
}
|
|
|
|
audio_jack_body_w = 6.00;
|
|
audio_jack_body_h = 5.00;
|
|
audio_jack_body_depth = 15.5;
|
|
|
|
audio_jack_hole_inner_d = 3.600;
|
|
audio_jack_hole_depth = 1.5;
|
|
|
|
audio_jack_mounting_offset = 7;
|
|
|
|
module audio_jack() {
|
|
color("gray") rotate([90, 0, 0]) {
|
|
translate([0, audio_jack_body_h/2, -audio_jack_hole_depth - audio_jack_mounting_offset]) {
|
|
translate([0, 0, audio_jack_hole_depth])
|
|
linear_extrude(height=audio_jack_body_depth)
|
|
square([audio_jack_body_w, audio_jack_body_h], center=true);
|
|
difference() {
|
|
linear_extrude(height=audio_jack_hole_depth)
|
|
audio_jack_hole();
|
|
translate([0, 0, -0.5])
|
|
linear_extrude(height=audio_jack_hole_depth + 1)
|
|
circle(d=audio_jack_hole_inner_d);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module audio_jack_drill(diameter) {
|
|
translate([0, audio_jack_mounting_offset, audio_jack_body_h/2]) {
|
|
rotate([-90, 0, 0]) {
|
|
linear_extrude(height=10) {
|
|
circle(r=diameter / 2.0);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
micro_sd_body_h = 1.32;
|
|
micro_sd_body_w = 13.825;
|
|
micro_sd_body_depth = 15.25;
|
|
|
|
micro_sd_card_w = 11.0;
|
|
micro_sd_card_h = 1.0;
|
|
micro_sd_card_depth = 15.0;
|
|
|
|
micro_sd_card_tx = 0.9;
|
|
micro_sd_card_ty = (micro_sd_body_h - micro_sd_card_h) / 2;
|
|
micro_sd_card_insert_depth = micro_sd_card_depth - 2.3;
|
|
|
|
micro_sd_card_eject_depth = micro_sd_card_depth - (2.3 + 3.3);
|
|
|
|
module micro_sd() {
|
|
translate([-micro_sd_body_w/2, -micro_sd_body_depth/2]) {
|
|
rotate([90, 0, 0]) {
|
|
color("lightgray") difference() {
|
|
translate([0, 0, -micro_sd_body_depth])
|
|
linear_extrude(height=micro_sd_body_depth)
|
|
square([micro_sd_body_w, micro_sd_body_h]);
|
|
translate([micro_sd_card_tx, micro_sd_card_ty, -micro_sd_card_insert_depth])
|
|
linear_extrude(height=micro_sd_card_depth)
|
|
square([micro_sd_card_w, micro_sd_card_h]);
|
|
}
|
|
|
|
color("black")
|
|
translate([micro_sd_card_tx, micro_sd_card_ty, -micro_sd_card_eject_depth])
|
|
linear_extrude(height=micro_sd_card_depth)
|
|
square([micro_sd_card_w, micro_sd_card_h]);
|
|
}
|
|
}
|
|
}
|
|
|
|
module micro_sd_drill(clearance) {
|
|
extra_width = 2;
|
|
translate([-micro_sd_body_w/2, 0]) {
|
|
rotate([90, 0, 0]) {
|
|
translate([micro_sd_card_tx - clearance - extra_width, micro_sd_card_ty - clearance, micro_sd_body_depth/2]) {
|
|
cube([micro_sd_card_w + 2 * clearance + extra_width, micro_sd_card_h + 2 * clearance, 10]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module portapack_h1_pcb_mounting_hole_drills() {
|
|
translate([ 64, 104]) pcb_mounting_hole_drill();
|
|
translate([126, 104]) pcb_mounting_hole_drill();
|
|
translate([176, 104]) pcb_mounting_hole_drill();
|
|
translate([ 64, 171]) pcb_mounting_hole_drill();
|
|
translate([176, 171]) pcb_mounting_hole_drill();
|
|
}
|
|
|
|
module portapack_h1_pcb_shape() {
|
|
difference() {
|
|
pcb_outline();
|
|
portapack_h1_pcb_mounting_hole_drills();
|
|
}
|
|
}
|
|
|
|
module portapack_h1_pcb() {
|
|
color("green") linear_extrude(height=pp_h1_pcb_thickness) {
|
|
portapack_h1_pcb_shape();
|
|
}
|
|
}
|
|
|
|
module portapack_h1_components_top() {
|
|
translate([ 94.83, 137.50]) rotate(90) lcd_kingtech();
|
|
translate([147.50, 137.50]) control_wheel();
|
|
}
|
|
|
|
module portapack_h1_components_bottom() {
|
|
translate([0, 0, pp_h1_pcb_thickness]) {
|
|
translate([171.76, 143.25]) rotate( 90) header_mle_dual("p20", 11);
|
|
translate([152.71, 164.84]) rotate(180) header_mle_dual("p22", 13);
|
|
translate([123.50, 143.25]) rotate( 90) header_mle_dual("p28", 11);
|
|
translate([172.10, 114.80]) rotate(270) audio_jack();
|
|
translate([ 68.40, 114.60]) rotate(270) micro_sd();
|
|
}
|
|
}
|
|
|
|
module portapack_h1_assembly() {
|
|
portapack_h1_pcb();
|
|
portapack_h1_components_top();
|
|
portapack_h1_components_bottom();
|
|
}
|
|
|
|
module portapack_h1_transform() {
|
|
rotate([180, 0, 0]) translate([-60, -100 - pcb_w])
|
|
children();
|
|
}
|
|
|
|
module portapack_h1() {
|
|
portapack_h1_transform() portapack_h1_assembly();
|
|
}
|
|
|
|
////////////////////////////////////////////////////////
|
|
|
|
module slot() {
|
|
hull() {
|
|
children();
|
|
translate([0, 0, -20]) children();
|
|
}
|
|
}
|
|
|
|
module portapack_h1_drills() {
|
|
micro_sd_clearance = 0.5;
|
|
audio_jack_hole_diameter = 7.0; // 6.5mm + 0.25mm clearance.
|
|
|
|
portapack_h1_transform() {
|
|
translate([172.10, 114.80, pp_h1_pcb_thickness]) rotate(270) audio_jack_drill(audio_jack_hole_diameter);
|
|
slot() translate([ 68.40, 114.60, pp_h1_pcb_thickness]) rotate(270) micro_sd_drill(micro_sd_clearance);
|
|
}
|
|
}
|
|
|
|
module hackrf_one_drills() {
|
|
clearance = 0.5;
|
|
sw_clearance = 0.6;
|
|
|
|
hackrf_one_transform() {
|
|
slot() translate([ 61.00, 161.00]) rotate( 0) sma_73251_2120_drill(clearance, h1_pcb_thickness);
|
|
translate([179.00, 145.00]) rotate(180) sma_73251_2120_drill(clearance, h1_pcb_thickness);
|
|
translate([179.00, 163.00]) rotate(180) sma_73251_2120_drill(clearance, h1_pcb_thickness);
|
|
|
|
translate([ 61.00, 117.90]) rotate(-90) led_drill();
|
|
translate([ 61.27, 130.55]) rotate(-90) led_drill();
|
|
translate([ 61.27, 135.12]) rotate(-90) led_drill();
|
|
translate([ 61.27, 139.69]) rotate(-90) led_drill();
|
|
translate([ 61.27, 144.27]) rotate(-90) led_drill();
|
|
translate([ 61.27, 148.84]) rotate(-90) led_drill();
|
|
|
|
slot() translate([ 62.70, 111.40]) sw_drill(sw_clearance);
|
|
slot() translate([ 62.70, 124.40]) sw_drill(sw_clearance);
|
|
|
|
translate([180.00, 124.00]) usb_drill(clearance);
|
|
}
|
|
}
|
|
|
|
module portapack_h1_stack_hackrf_one() {
|
|
hackrf_one();
|
|
}
|
|
|
|
module portapack_h1_stack_spacers() {
|
|
hackrf_one_transform() {
|
|
translate([ 64, 104]) spacer();
|
|
translate([126, 104]) spacer();
|
|
translate([176, 104]) spacer();
|
|
translate([ 64, 171]) spacer();
|
|
translate([176, 171]) spacer();
|
|
}
|
|
}
|
|
|
|
module portapack_h1_stack_portapack() {
|
|
translate([0, 0, spacer_height + pp_h1_pcb_thickness]) portapack_h1();
|
|
}
|
|
|
|
module portapack_h1_stack_screws() {
|
|
screw_tz = spacer_height + pp_h1_pcb_thickness;
|
|
translate([0, 0, screw_tz]) portapack_h1_transform() {
|
|
translate([ 64, 104]) screw();
|
|
translate([126, 104]) screw();
|
|
translate([176, 104]) screw();
|
|
translate([ 64, 171]) screw();
|
|
translate([176, 171]) screw();
|
|
}
|
|
}
|
|
|
|
module portapack_h1_stack() {
|
|
portapack_h1_stack_hackrf_one();
|
|
portapack_h1_stack_spacers();
|
|
portapack_h1_stack_portapack();
|
|
portapack_h1_stack_screws();
|
|
}
|
|
|
|
module portapack_h1_stack_drills() {
|
|
hackrf_one_drills();
|
|
|
|
translate([0, 0, spacer_height + pp_h1_pcb_thickness]) portapack_h1_drills();
|
|
}
|