mayhem-firmware/firmware/application/baseband_api.hpp
furrtek 950bc2b1d2 AFSK RX works (only Bell202 for now)
AFSK RX always logs to file
Removed frequency and bw settings from modem setup view
Updated binary
Bugfix: Binary display shifted one bit
Bugfix: Frequency manager views freezing if SD card not present
Bugfix: Menuview blinking arrow not showing up at the right position
Bugfix: Freeze if console written to while it's hidden
Broken: LCR TX, needs UI update
2017-09-02 08:28:29 +01:00

98 lines
3.3 KiB
C++

/*
* Copyright (C) 2016 Jared Boone, ShareBrained Technology, Inc.
* Copyright (C) 2016 Furrtek
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#ifndef __BASEBAND_API_H__
#define __BASEBAND_API_H__
#include "message.hpp"
#include "pocsag_packet.hpp"
#include "jammer.hpp"
#include "dsp_fir_taps.hpp"
#include "spi_image.hpp"
#include <cstddef>
namespace baseband {
struct AMConfig {
const fir_taps_complex<64> channel;
const AMConfigureMessage::Modulation modulation;
void apply() const;
};
struct NBFMConfig {
const fir_taps_real<24> decim_0;
const fir_taps_real<32> decim_1;
const fir_taps_real<32> channel;
const size_t deviation;
void apply(const uint8_t squelch_level) const;
};
struct WFMConfig {
void apply() const;
};
void set_tone(const uint32_t index, const uint32_t delta, const uint32_t duration);
void set_tones_config(const uint32_t bw, const uint32_t pre_silence, const uint16_t tone_count,
const bool dual_tone, const bool audio_out);
void kill_tone();
void set_sstv_data(const uint8_t vis_code, const uint32_t pixel_duration);
void set_audiotx_data(const uint32_t divider, const uint32_t bw, const uint32_t gain_x10,
const bool ctcss_enabled, const uint32_t ctcss_phase_inc);
void set_fifo_data(const int8_t * data);
void set_pwmrssi(int32_t avg, bool enabled);
void set_afsk_data(const uint32_t afsk_samples_per_bit, const uint32_t afsk_phase_inc_mark, const uint32_t afsk_phase_inc_space,
const uint8_t afsk_repeat, const uint32_t afsk_bw, const uint8_t symbol_count);
void kill_afsk();
void set_afsk(const uint32_t baudrate, const uint32_t word_length, const uint32_t trigger_value, const bool trigger_word);
void set_ook_data(const uint32_t stream_length, const uint32_t samples_per_bit, const uint8_t repeat,
const uint32_t pause_symbols);
void set_fsk_data(const uint32_t stream_length, const uint32_t samples_per_bit, const uint32_t shift,
const uint32_t progress_notice);
void set_pocsag(const pocsag::BitRate bitrate);
void set_adsb();
void set_jammer(const bool run, const jammer::JammerType type, const uint32_t speed);
void set_rds_data(const uint16_t message_length);
void set_spectrum(const size_t sampling_rate, const size_t trigger);
void set_siggen_tone(const uint32_t tone);
void set_siggen_config(const uint32_t bw, const uint32_t shape, const uint32_t duration);
void request_beep();
void run_image(const portapack::spi_flash::image_tag_t image_tag);
void shutdown();
void spectrum_streaming_start();
void spectrum_streaming_stop();
void capture_start(CaptureConfig* const config);
void capture_stop();
void replay_start(ReplayConfig* const config);
void replay_stop();
} /* namespace baseband */
#endif/*__BASEBAND_API_H__*/