mayhem-firmware/firmware/application/audio.cpp
Jared Boone 0294165481 Extract LOTS of stuff into an audio API.
Prevent all manner of type and implementation leakage.
2016-02-05 16:25:43 -08:00

175 lines
3.2 KiB
C++

/*
* Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#include "audio.hpp"
#include "portapack.hpp"
using portapack::i2c0;
using portapack::clock_manager;
#include "wm8731.hpp"
using wolfson::wm8731::WM8731;
#include "i2s.hpp"
using namespace lpc43xx;
namespace audio {
namespace {
constexpr i2s::ConfigTX i2s0_config_tx {
.dao = i2s::DAO {
.wordwidth = i2s::WordWidth::Bits16,
.mono = 0,
.stop = 1,
.reset = 0,
.ws_sel = 0,
.ws_halfperiod = 0x0f,
.mute = 1,
},
.txrate = i2s::MCLKRate {
.x_divider = 0,
.y_divider = 0,
},
.txbitrate = i2s::BitRate {
.bitrate = 7,
},
.txmode = i2s::Mode {
.clksel = i2s::ClockSelect::BaseAudioClkOrExternalMCLK,
.four_pin = 0,
.mclk_out_en = 1,
},
};
constexpr i2s::ConfigRX i2s0_config_rx {
.dai = i2s::DAI {
.wordwidth = i2s::WordWidth::Bits16,
.mono = 0,
.stop = 1,
.reset = 0,
.ws_sel = 1,
.ws_halfperiod = 0x0f,
},
.rxrate = i2s::MCLKRate {
.x_divider = 0,
.y_divider = 0,
},
.rxbitrate = i2s::BitRate {
.bitrate = 7,
},
.rxmode = i2s::Mode {
.clksel = i2s::ClockSelect::BaseAudioClkOrExternalMCLK,
.four_pin = 1,
.mclk_out_en = 0,
},
};
constexpr i2s::ConfigDMA i2s0_config_dma {
.dma1 = i2s::DMA {
.rx_enable = 1,
.tx_enable = 0,
.rx_depth = 4,
.tx_depth = 0,
},
.dma2 = i2s::DMA {
.rx_enable = 0,
.tx_enable = 1,
.rx_depth = 0,
.tx_depth = 4,
},
};
constexpr uint8_t wm8731_i2c_address = 0x1a;
WM8731 audio_codec { i2c0, wm8731_i2c_address };
} /* namespace */
namespace output {
void start() {
i2s::i2s0::tx_start();
unmute();
}
void stop() {
mute();
i2s::i2s0::tx_stop();
}
void mute() {
i2s::i2s0::tx_mute();
audio_codec.headphone_mute();
}
void unmute() {
i2s::i2s0::tx_unmute();
}
} /* namespace output */
namespace headphone {
volume_range_t volume_range() {
return wolfson::wm8731::headphone_gain_range;
}
void set_volume(const volume_t volume) {
audio_codec.set_headphone_volume(volume);
}
} /* namespace headphone */
namespace debug {
int reg_count() {
return wolfson::wm8731::reg_count;
}
uint16_t reg_read(const int register_number) {
return audio_codec.read(register_number);
}
} /* namespace debug */
void init() {
clock_manager.start_audio_pll();
audio_codec.init();
i2s::i2s0::configure(
i2s0_config_tx,
i2s0_config_rx,
i2s0_config_dma
);
}
void shutdown() {
audio_codec.reset();
output::stop();
}
void set_rate(const Rate rate) {
clock_manager.set_base_audio_clock_divider(toUType(rate));
}
} /* namespace audio */