mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-12-23 16:37:43 +00:00
293 lines
9.9 KiB
C
Executable File
293 lines
9.9 KiB
C
Executable File
/*
|
|
SPC5 HAL - Copyright (C) 2013 STMicroelectronics
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file SPC560Pxx/hal_lld.c
|
|
* @brief SPC560Pxx HAL subsystem low level driver source.
|
|
*
|
|
* @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief PIT channel 3 interrupt handler.
|
|
*
|
|
* @isr
|
|
*/
|
|
CH_IRQ_HANDLER(vector59) {
|
|
|
|
CH_IRQ_PROLOGUE();
|
|
|
|
chSysLockFromIsr();
|
|
chSysTimerHandlerI();
|
|
chSysUnlockFromIsr();
|
|
|
|
/* Resets the PIT channel 3 IRQ flag.*/
|
|
PIT.CH[0].TFLG.R = 1;
|
|
|
|
CH_IRQ_EPILOGUE();
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level HAL driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void hal_lld_init(void) {
|
|
uint32_t reg;
|
|
|
|
/* The system is switched to the RUN0 mode, the default for normal
|
|
operations.*/
|
|
if (halSPCSetRunMode(SPC5_RUNMODE_RUN0) == CH_FAILED) {
|
|
SPC5_CLOCK_FAILURE_HOOK();
|
|
}
|
|
|
|
/* INTC initialization, software vector mode, 4 bytes vectors, starting
|
|
at priority 0.*/
|
|
INTC.MCR.R = 0;
|
|
INTC.CPR.R = 0;
|
|
INTC.IACKR.R = (uint32_t)_vectors;
|
|
|
|
/* PIT channel 0 initialization for Kernel ticks, the PIT is configured
|
|
to run in DRUN,RUN0...RUN3 and HALT0 modes, the clock is gated in other
|
|
modes.*/
|
|
INTC.PSR[59].R = SPC5_PIT0_IRQ_PRIORITY;
|
|
halSPCSetPeripheralClockMode(92,
|
|
SPC5_ME_PCTL_RUN(2) | SPC5_ME_PCTL_LP(2));
|
|
reg = halSPCGetSystemClock() / CH_FREQUENCY - 1;
|
|
PIT.PITMCR.R = 1; /* PIT clock enabled, stop while debugging. */
|
|
PIT.CH[0].LDVAL.R = reg;
|
|
PIT.CH[0].CVAL.R = reg;
|
|
PIT.CH[0].TFLG.R = 1; /* Interrupt flag cleared. */
|
|
PIT.CH[0].TCTRL.R = 3; /* Timer active, interrupt enabled. */
|
|
}
|
|
|
|
/**
|
|
* @brief SPC560Pxx clocks and PLL initialization.
|
|
* @note All the involved constants come from the file @p board.h and
|
|
* @p hal_lld.h
|
|
* @note This function must be invoked only after the system reset.
|
|
*
|
|
* @special
|
|
*/
|
|
void spc_clock_init(void) {
|
|
|
|
/* Waiting for IRC stabilization before attempting anything else.*/
|
|
while (!ME.GS.B.S_RC)
|
|
;
|
|
|
|
#if !SPC5_NO_INIT
|
|
|
|
#if SPC5_DISABLE_WATCHDOG
|
|
/* SWT disabled.*/
|
|
SWT.SR.R = 0xC520;
|
|
SWT.SR.R = 0xD928;
|
|
SWT.CR.R = 0xFF00000A;
|
|
#endif
|
|
|
|
/* SSCM initialization. Setting up the most restrictive handling of
|
|
invalid accesses to peripherals.*/
|
|
SSCM.ERROR.R = 3; /* PAE and RAE bits. */
|
|
|
|
/* RGM errors clearing.*/
|
|
RGM.FES.R = 0xFFFF;
|
|
RGM.DES.R = 0xFFFF;
|
|
|
|
/* The system must be in DRUN mode on entry, if this is not the case then
|
|
it is considered a serious anomaly.*/
|
|
if (ME.GS.B.S_CURRENTMODE != SPC5_RUNMODE_DRUN) {
|
|
SPC5_CLOCK_FAILURE_HOOK();
|
|
}
|
|
|
|
#if defined(SPC5_OSC_BYPASS)
|
|
/* If the board is equipped with an oscillator instead of a xtal then the
|
|
bypass must be activated.*/
|
|
CGM.OSC_CTL.B.OSCBYP = TRUE;
|
|
#endif /* SPC5_OSC_BYPASS */
|
|
|
|
/* Setting the various dividers and source selectors.*/
|
|
CGM.AC0DC.R = SPC5_CGM_AC0_DC0;
|
|
CGM.AC0SC.R = SPC5_AUX0CLK_SRC;
|
|
CGM.AC1DC.R = SPC5_CGM_AC1_DC0;
|
|
CGM.AC1SC.R = SPC5_AUX1CLK_SRC;
|
|
CGM.AC2DC.R = SPC5_CGM_AC2_DC0;
|
|
CGM.AC2SC.R = SPC5_AUX2CLK_SRC;
|
|
CGM.AC3DC.R = SPC5_CGM_AC3_DC0;
|
|
CGM.AC3SC.R = SPC5_AUX3CLK_SRC;
|
|
|
|
/* Enables the XOSC in order to check its functionality before proceeding
|
|
with the initialization.*/
|
|
ME.DRUN.R = SPC5_ME_MC_SYSCLK_IRC | SPC5_ME_MC_IRCON | \
|
|
SPC5_ME_MC_XOSC0ON | SPC5_ME_MC_CFLAON_NORMAL | \
|
|
SPC5_ME_MC_DFLAON_NORMAL | SPC5_ME_MC_MVRON;
|
|
if (halSPCSetRunMode(SPC5_RUNMODE_DRUN) == CH_FAILED) {
|
|
SPC5_CLOCK_FAILURE_HOOK();
|
|
}
|
|
|
|
/* Initialization of the FMPLLs settings.*/
|
|
CGM.FMPLL[0].CR.R = SPC5_FMPLL0_ODF |
|
|
((SPC5_FMPLL0_IDF_VALUE - 1) << 26) |
|
|
(SPC5_FMPLL0_NDIV_VALUE << 16);
|
|
CGM.FMPLL[0].MR.R = 0; /* TODO: Add a setting. */
|
|
CGM.FMPLL[1].CR.R = SPC5_FMPLL1_ODF |
|
|
((SPC5_FMPLL1_IDF_VALUE - 1) << 26) |
|
|
(SPC5_FMPLL1_NDIV_VALUE << 16);
|
|
CGM.FMPLL[1].MR.R = 0; /* TODO: Add a setting. */
|
|
|
|
/* Run modes initialization.*/
|
|
ME.IS.R = 8; /* Resetting I_ICONF status.*/
|
|
ME.MER.R = SPC5_ME_ME_BITS; /* Enabled run modes. */
|
|
ME.TEST.R = SPC5_ME_TEST_MC_BITS; /* TEST run mode. */
|
|
ME.SAFE.R = SPC5_ME_SAFE_MC_BITS; /* SAFE run mode. */
|
|
ME.DRUN.R = SPC5_ME_DRUN_MC_BITS; /* DRUN run mode. */
|
|
ME.RUN[0].R = SPC5_ME_RUN0_MC_BITS; /* RUN0 run mode. */
|
|
ME.RUN[1].R = SPC5_ME_RUN1_MC_BITS; /* RUN1 run mode. */
|
|
ME.RUN[2].R = SPC5_ME_RUN2_MC_BITS; /* RUN2 run mode. */
|
|
ME.RUN[3].R = SPC5_ME_RUN3_MC_BITS; /* RUN0 run mode. */
|
|
ME.HALT0.R = SPC5_ME_HALT0_MC_BITS; /* HALT0 run mode. */
|
|
ME.STOP0.R = SPC5_ME_STOP0_MC_BITS; /* STOP0 run mode. */
|
|
if (ME.IS.B.I_CONF) {
|
|
/* Configuration rejected.*/
|
|
SPC5_CLOCK_FAILURE_HOOK();
|
|
}
|
|
|
|
/* Peripherals run and low power modes initialization.*/
|
|
ME.RUNPC[0].R = SPC5_ME_RUN_PC0_BITS;
|
|
ME.RUNPC[1].R = SPC5_ME_RUN_PC1_BITS;
|
|
ME.RUNPC[2].R = SPC5_ME_RUN_PC2_BITS;
|
|
ME.RUNPC[3].R = SPC5_ME_RUN_PC3_BITS;
|
|
ME.RUNPC[4].R = SPC5_ME_RUN_PC4_BITS;
|
|
ME.RUNPC[5].R = SPC5_ME_RUN_PC5_BITS;
|
|
ME.RUNPC[6].R = SPC5_ME_RUN_PC6_BITS;
|
|
ME.RUNPC[7].R = SPC5_ME_RUN_PC7_BITS;
|
|
ME.LPPC[0].R = SPC5_ME_LP_PC0_BITS;
|
|
ME.LPPC[1].R = SPC5_ME_LP_PC1_BITS;
|
|
ME.LPPC[2].R = SPC5_ME_LP_PC2_BITS;
|
|
ME.LPPC[3].R = SPC5_ME_LP_PC3_BITS;
|
|
ME.LPPC[4].R = SPC5_ME_LP_PC4_BITS;
|
|
ME.LPPC[5].R = SPC5_ME_LP_PC5_BITS;
|
|
ME.LPPC[6].R = SPC5_ME_LP_PC6_BITS;
|
|
ME.LPPC[7].R = SPC5_ME_LP_PC7_BITS;
|
|
|
|
/* CFLASH settings calculated for a maximum clock of 64MHz.*/
|
|
CFLASH.PFCR0.B.BK0_APC = 2;
|
|
CFLASH.PFCR0.B.BK0_RWSC = 2;
|
|
CFLASH.PFCR1.B.BK1_APC = 2;
|
|
CFLASH.PFCR1.B.BK1_RWSC = 2;
|
|
|
|
/* Switches again to DRUN mode (current mode) in order to update the
|
|
settings.*/
|
|
if (halSPCSetRunMode(SPC5_RUNMODE_DRUN) == CH_FAILED) {
|
|
SPC5_CLOCK_FAILURE_HOOK();
|
|
}
|
|
#endif /* !SPC5_NO_INIT */
|
|
}
|
|
|
|
/**
|
|
* @brief Switches the system to the specified run mode.
|
|
*
|
|
* @param[in] mode one of the possible run modes
|
|
*
|
|
* @return The operation status.
|
|
* @retval CH_SUCCESS if the switch operation has been completed.
|
|
* @retval CH_FAILED if the switch operation failed.
|
|
*/
|
|
bool_t halSPCSetRunMode(spc5_runmode_t mode) {
|
|
|
|
/* Clearing status register bits I_IMODE(4) and I_IMTC(1).*/
|
|
ME.IS.R = 5;
|
|
|
|
/* Starts a transition process.*/
|
|
ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY;
|
|
ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY_INV;
|
|
|
|
/* Waits for the mode switch or an error condition.*/
|
|
while (TRUE) {
|
|
uint32_t r = ME.IS.R;
|
|
if (r & 1)
|
|
return CH_SUCCESS;
|
|
if (r & 4)
|
|
return CH_FAILED;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Changes the clock mode of a peripheral.
|
|
*
|
|
* @param[in] n index of the @p PCTL register
|
|
* @param[in] pctl new value for the @p PCTL register
|
|
*
|
|
* @notapi
|
|
*/
|
|
void halSPCSetPeripheralClockMode(uint32_t n, uint32_t pctl) {
|
|
uint32_t mode;
|
|
|
|
ME.PCTL[n].R = pctl;
|
|
mode = ME.MCTL.B.TARGET_MODE;
|
|
ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY;
|
|
ME.MCTL.R = SPC5_ME_MCTL_MODE(mode) | SPC5_ME_MCTL_KEY_INV;
|
|
}
|
|
|
|
#if !SPC5_NO_INIT || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief Returns the system clock under the current run mode.
|
|
*
|
|
* @return The system clock in Hertz.
|
|
*/
|
|
uint32_t halSPCGetSystemClock(void) {
|
|
uint32_t sysclk;
|
|
|
|
sysclk = ME.GS.B.S_SYSCLK;
|
|
switch (sysclk) {
|
|
case SPC5_ME_GS_SYSCLK_IRC:
|
|
return SPC5_IRC_CLK;
|
|
case SPC5_ME_GS_SYSCLK_XOSC:
|
|
return SPC5_XOSC_CLK;
|
|
case SPC5_ME_GS_SYSCLK_FMPLL0:
|
|
return SPC5_FMPLL0_CLK;
|
|
case SPC5_ME_GS_SYSCLK_FMPLL1:
|
|
return SPC5_FMPLL1_CLK;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
#endif /* !SPC5_NO_INIT */
|
|
|
|
/** @} */
|