TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-12-16 21:18:11 +00:00
Code Issues Packages Projects Releases Wiki Activity
bbd1a5a2ef
mayhem-firmware/firmware/chibios/os/hal/platforms/STM32F4xx/adc_lld.h

568 lines
20 KiB
C
Executable File
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32F4xx/adc_lld.h
* @brief STM32F4xx/STM32F2xx ADC subsystem low level driver header.
*
* @addtogroup ADC
* @{
*/
#ifndef _ADC_LLD_H_
#define _ADC_LLD_H_
#if HAL_USE_ADC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @name Absolute Maximum Ratings
* @{
*/
/**
* @brief Minimum ADC clock frequency.
*/
#define STM32_ADCCLK_MIN 600000
/**
* @brief Maximum ADC clock frequency.
*/
#if defined(STM32F4XX) || defined(__DOXYGEN__)
#define STM32_ADCCLK_MAX 36000000
#else
#define STM32_ADCCLK_MAX 30000000
#endif
/** @} */
/**
* @name Triggers selection
* @{
*/
#define ADC_CR2_EXTSEL_SRC(n) ((n) << 24) /**< @brief Trigger source. */
/** @} */
/**
* @name ADC clock divider settings
* @{
*/
#define ADC_CCR_ADCPRE_DIV2 0
#define ADC_CCR_ADCPRE_DIV4 1
#define ADC_CCR_ADCPRE_DIV6 2
#define ADC_CCR_ADCPRE_DIV8 3
/** @} */
/**
* @name Available analog channels
* @{
*/
#define ADC_CHANNEL_IN0 0 /**< @brief External analog input 0. */
#define ADC_CHANNEL_IN1 1 /**< @brief External analog input 1. */
#define ADC_CHANNEL_IN2 2 /**< @brief External analog input 2. */
#define ADC_CHANNEL_IN3 3 /**< @brief External analog input 3. */
#define ADC_CHANNEL_IN4 4 /**< @brief External analog input 4. */
#define ADC_CHANNEL_IN5 5 /**< @brief External analog input 5. */
#define ADC_CHANNEL_IN6 6 /**< @brief External analog input 6. */
#define ADC_CHANNEL_IN7 7 /**< @brief External analog input 7. */
#define ADC_CHANNEL_IN8 8 /**< @brief External analog input 8. */
#define ADC_CHANNEL_IN9 9 /**< @brief External analog input 9. */
#define ADC_CHANNEL_IN10 10 /**< @brief External analog input 10. */
#define ADC_CHANNEL_IN11 11 /**< @brief External analog input 11. */
#define ADC_CHANNEL_IN12 12 /**< @brief External analog input 12. */
#define ADC_CHANNEL_IN13 13 /**< @brief External analog input 13. */
#define ADC_CHANNEL_IN14 14 /**< @brief External analog input 14. */
#define ADC_CHANNEL_IN15 15 /**< @brief External analog input 15. */
#define ADC_CHANNEL_SENSOR 16 /**< @brief Internal temperature sensor.
@note Available onADC1 only. */
#define ADC_CHANNEL_VREFINT 17 /**< @brief Internal reference.
@note Available onADC1 only. */
#define ADC_CHANNEL_VBAT 18 /**< @brief VBAT.
@note Available onADC1 only. */
/** @} */
/**
* @name Sampling rates
* @{
*/
#define ADC_SAMPLE_3 0 /**< @brief 3 cycles sampling time. */
#define ADC_SAMPLE_15 1 /**< @brief 15 cycles sampling time. */
#define ADC_SAMPLE_28 2 /**< @brief 28 cycles sampling time. */
#define ADC_SAMPLE_56 3 /**< @brief 56 cycles sampling time. */
#define ADC_SAMPLE_84 4 /**< @brief 84 cycles sampling time. */
#define ADC_SAMPLE_112 5 /**< @brief 112 cycles sampling time. */
#define ADC_SAMPLE_144 6 /**< @brief 144 cycles sampling time. */
#define ADC_SAMPLE_480 7 /**< @brief 480 cycles sampling time. */
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief ADC common clock divider.
* @note This setting is influenced by the VDDA voltage and other
* external conditions, please refer to the datasheet for more
* info.<br>
* See section 5.3.20 "12-bit ADC characteristics".
*/
#if !defined(STM32_ADC_ADCPRE) || defined(__DOXYGEN__)
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV2
#endif
/**
* @brief ADC1 driver enable switch.
* @details If set to @p TRUE the support for ADC1 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_ADC_USE_ADC1) || defined(__DOXYGEN__)
#define STM32_ADC_USE_ADC1 FALSE
#endif
/**
* @brief ADC2 driver enable switch.
* @details If set to @p TRUE the support for ADC2 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_ADC_USE_ADC2) || defined(__DOXYGEN__)
#define STM32_ADC_USE_ADC2 FALSE
#endif
/**
* @brief ADC3 driver enable switch.
* @details If set to @p TRUE the support for ADC3 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_ADC_USE_ADC3) || defined(__DOXYGEN__)
#define STM32_ADC_USE_ADC3 FALSE
#endif
/**
* @brief DMA stream used for ADC1 operations.
*/
#if !defined(STM32_ADC_ADC1_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
#endif
/**
* @brief DMA stream used for ADC2 operations.
*/
#if !defined(STM32_ADC_ADC2_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
#endif
/**
* @brief DMA stream used for ADC3 operations.
*/
#if !defined(STM32_ADC_ADC3_DMA_STREAM) || defined(__DOXYGEN__)
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
#endif
/**
* @brief ADC1 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_ADC_ADC1_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#endif
/**
* @brief ADC2 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_ADC_ADC2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_ADC2_DMA_PRIORITY 2
#endif
/**
* @brief ADC3 DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_ADC_ADC3_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_ADC3_DMA_PRIORITY 2
#endif
/**
* @brief ADC interrupt priority level setting.
* @note This setting is shared among ADC1, ADC2 and ADC3 because
* all ADCs share the same vector.
*/
#if !defined(STM32_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_IRQ_PRIORITY 5
#endif
/**
* @brief ADC1 DMA interrupt priority level setting.
*/
#if !defined(STM32_ADC_ADC1_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
#endif
/**
* @brief ADC2 DMA interrupt priority level setting.
*/
#if !defined(STM32_ADC_ADC2_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
#endif
/**
* @brief ADC3 DMA interrupt priority level setting.
*/
#if !defined(STM32_ADC_ADC3_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_ADC_USE_ADC1 && !STM32_HAS_ADC1
#error "ADC1 not present in the selected device"
#endif
#if STM32_ADC_USE_ADC2 && !STM32_HAS_ADC2
#error "ADC2 not present in the selected device"
#endif
#if STM32_ADC_USE_ADC3 && !STM32_HAS_ADC3
#error "ADC3 not present in the selected device"
#endif
#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3
#error "ADC driver activated but no ADC peripheral assigned"
#endif
#if STM32_ADC_USE_ADC1 && \
!STM32_DMA_IS_VALID_ID(STM32_ADC_ADC1_DMA_STREAM, STM32_ADC1_DMA_MSK)
#error "invalid DMA stream associated to ADC1"
#endif
#if STM32_ADC_USE_ADC2 && \
!STM32_DMA_IS_VALID_ID(STM32_ADC_ADC2_DMA_STREAM, STM32_ADC2_DMA_MSK)
#error "invalid DMA stream associated to ADC2"
#endif
#if STM32_ADC_USE_ADC3 && \
!STM32_DMA_IS_VALID_ID(STM32_ADC_ADC3_DMA_STREAM, STM32_ADC3_DMA_MSK)
#error "invalid DMA stream associated to ADC3"
#endif
/* ADC clock related settings and checks.*/
#if STM32_ADC_ADCPRE == ADC_CCR_ADCPRE_DIV2
#define STM32_ADCCLK (STM32_PCLK2 / 2)
#elif STM32_ADC_ADCPRE == ADC_CCR_ADCPRE_DIV4
#define STM32_ADCCLK (STM32_PCLK2 / 4)
#elif STM32_ADC_ADCPRE == ADC_CCR_ADCPRE_DIV6
#define STM32_ADCCLK (STM32_PCLK2 / 6)
#elif STM32_ADC_ADCPRE == ADC_CCR_ADCPRE_DIV8
#define STM32_ADCCLK (STM32_PCLK2 / 8)
#else
#error "invalid STM32_ADC_ADCPRE value specified"
#endif
#if (STM32_ADCCLK < STM32_ADCCLK_MIN) || (STM32_ADCCLK > STM32_ADCCLK_MAX)
#error "STM32_ADCCLK outside acceptable range (STM32_ADCCLK_MIN...STM32_ADCCLK_MAX)"
#endif
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief ADC sample data type.
*/
typedef uint16_t adcsample_t;
/**
* @brief Channels number in a conversion group.
*/
typedef uint16_t adc_channels_num_t;
/**
* @brief Possible ADC failure causes.
* @note Error codes are architecture dependent and should not relied
* upon.
*/
typedef enum {
ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */
ADC_ERR_OVERFLOW = 1 /**< ADC overflow condition. */
} adcerror_t;
/**
* @brief Type of a structure representing an ADC driver.
*/
typedef struct ADCDriver ADCDriver;
/**
* @brief ADC notification callback type.
*
* @param[in] adcp pointer to the @p ADCDriver object triggering the
* callback
* @param[in] buffer pointer to the most recent samples data
* @param[in] n number of buffer rows available starting from @p buffer
*/
typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
/**
* @brief ADC error callback type.
*
* @param[in] adcp pointer to the @p ADCDriver object triggering the
* callback
* @param[in] err ADC error code
*/
typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
/**
* @brief Conversion group configuration structure.
* @details This implementation-dependent structure describes a conversion
* operation.
* @note The use of this configuration structure requires knowledge of
* STM32 ADC cell registers interface, please refer to the STM32
* reference manual for details.
*/
typedef struct {
/**
* @brief Enables the circular buffer mode for the group.
*/
bool_t circular;
/**
* @brief Number of the analog channels belonging to the conversion group.
*/
adc_channels_num_t num_channels;
/**
* @brief Callback function associated to the group or @p NULL.
*/
adccallback_t end_cb;
/**
* @brief Error callback or @p NULL.
*/
adcerrorcallback_t error_cb;
/* End of the mandatory fields.*/
/**
* @brief ADC CR1 register initialization data.
* @note All the required bits must be defined into this field except
* @p ADC_CR1_SCAN that is enforced inside the driver.
*/
uint32_t cr1;
/**
* @brief ADC CR2 register initialization data.
* @note All the required bits must be defined into this field except
* @p ADC_CR2_DMA, @p ADC_CR2_CONT and @p ADC_CR2_ADON that are
* enforced inside the driver.
*/
uint32_t cr2;
/**
* @brief ADC SMPR1 register initialization data.
* @details In this field must be specified the sample times for channels
* 10...18.
*/
uint32_t smpr1;
/**
* @brief ADC SMPR2 register initialization data.
* @details In this field must be specified the sample times for channels
* 0...9.
*/
uint32_t smpr2;
/**
* @brief ADC SQR1 register initialization data.
* @details Conversion group sequence 13...16 + sequence length.
*/
uint32_t sqr1;
/**
* @brief ADC SQR2 register initialization data.
* @details Conversion group sequence 7...12.
*/
uint32_t sqr2;
/**
* @brief ADC SQR3 register initialization data.
* @details Conversion group sequence 1...6.
*/
uint32_t sqr3;
} ADCConversionGroup;
/**
* @brief Driver configuration structure.
* @note It could be empty on some architectures.
*/
typedef struct {
uint32_t dummy;
} ADCConfig;
/**
* @brief Structure representing an ADC driver.
*/
struct ADCDriver {
/**
* @brief Driver state.
*/
adcstate_t state;
/**
* @brief Current configuration data.
*/
const ADCConfig *config;
/**
* @brief Current samples buffer pointer or @p NULL.
*/
adcsample_t *samples;
/**
* @brief Current samples buffer depth or @p 0.
*/
size_t depth;
/**
* @brief Current conversion group pointer or @p NULL.
*/
const ADCConversionGroup *grpp;
#if ADC_USE_WAIT || defined(__DOXYGEN__)
/**
* @brief Waiting thread.
*/
Thread *thread;
#endif
#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
#if CH_USE_MUTEXES || defined(__DOXYGEN__)
/**
* @brief Mutex protecting the peripheral.
*/
Mutex mutex;
#elif CH_USE_SEMAPHORES
Semaphore semaphore;
#endif
#endif /* ADC_USE_MUTUAL_EXCLUSION */
#if defined(ADC_DRIVER_EXT_FIELDS)
ADC_DRIVER_EXT_FIELDS
#endif
/* End of the mandatory fields.*/
/**
* @brief Pointer to the ADCx registers block.
*/
ADC_TypeDef *adc;
/**
* @brief Pointer to associated DMA channel.
*/
const stm32_dma_stream_t *dmastp;
/**
* @brief DMA mode bit mask.
*/
uint32_t dmamode;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @name Sequences building helper macros
* @{
*/
/**
* @brief Number of channels in a conversion sequence.
*/
#define ADC_SQR1_NUM_CH(n) (((n) - 1) << 20)
#define ADC_SQR3_SQ1_N(n) ((n) << 0) /**< @brief 1st channel in seq. */
#define ADC_SQR3_SQ2_N(n) ((n) << 5) /**< @brief 2nd channel in seq. */
#define ADC_SQR3_SQ3_N(n) ((n) << 10) /**< @brief 3rd channel in seq. */
#define ADC_SQR3_SQ4_N(n) ((n) << 15) /**< @brief 4th channel in seq. */
#define ADC_SQR3_SQ5_N(n) ((n) << 20) /**< @brief 5th channel in seq. */
#define ADC_SQR3_SQ6_N(n) ((n) << 25) /**< @brief 6th channel in seq. */
#define ADC_SQR2_SQ7_N(n) ((n) << 0) /**< @brief 7th channel in seq. */
#define ADC_SQR2_SQ8_N(n) ((n) << 5) /**< @brief 8th channel in seq. */
#define ADC_SQR2_SQ9_N(n) ((n) << 10) /**< @brief 9th channel in seq. */
#define ADC_SQR2_SQ10_N(n) ((n) << 15) /**< @brief 10th channel in seq.*/
#define ADC_SQR2_SQ11_N(n) ((n) << 20) /**< @brief 11th channel in seq.*/
#define ADC_SQR2_SQ12_N(n) ((n) << 25) /**< @brief 12th channel in seq.*/
#define ADC_SQR1_SQ13_N(n) ((n) << 0) /**< @brief 13th channel in seq.*/
#define ADC_SQR1_SQ14_N(n) ((n) << 5) /**< @brief 14th channel in seq.*/
#define ADC_SQR1_SQ15_N(n) ((n) << 10) /**< @brief 15th channel in seq.*/
#define ADC_SQR1_SQ16_N(n) ((n) << 15) /**< @brief 16th channel in seq.*/
/** @} */
/**
* @name Sampling rate settings helper macros
* @{
*/
#define ADC_SMPR2_SMP_AN0(n) ((n) << 0) /**< @brief AN0 sampling time. */
#define ADC_SMPR2_SMP_AN1(n) ((n) << 3) /**< @brief AN1 sampling time. */
#define ADC_SMPR2_SMP_AN2(n) ((n) << 6) /**< @brief AN2 sampling time. */
#define ADC_SMPR2_SMP_AN3(n) ((n) << 9) /**< @brief AN3 sampling time. */
#define ADC_SMPR2_SMP_AN4(n) ((n) << 12) /**< @brief AN4 sampling time. */
#define ADC_SMPR2_SMP_AN5(n) ((n) << 15) /**< @brief AN5 sampling time. */
#define ADC_SMPR2_SMP_AN6(n) ((n) << 18) /**< @brief AN6 sampling time. */
#define ADC_SMPR2_SMP_AN7(n) ((n) << 21) /**< @brief AN7 sampling time. */
#define ADC_SMPR2_SMP_AN8(n) ((n) << 24) /**< @brief AN8 sampling time. */
#define ADC_SMPR2_SMP_AN9(n) ((n) << 27) /**< @brief AN9 sampling time. */
#define ADC_SMPR1_SMP_AN10(n) ((n) << 0) /**< @brief AN10 sampling time. */
#define ADC_SMPR1_SMP_AN11(n) ((n) << 3) /**< @brief AN11 sampling time. */
#define ADC_SMPR1_SMP_AN12(n) ((n) << 6) /**< @brief AN12 sampling time. */
#define ADC_SMPR1_SMP_AN13(n) ((n) << 9) /**< @brief AN13 sampling time. */
#define ADC_SMPR1_SMP_AN14(n) ((n) << 12) /**< @brief AN14 sampling time. */
#define ADC_SMPR1_SMP_AN15(n) ((n) << 15) /**< @brief AN15 sampling time. */
#define ADC_SMPR1_SMP_SENSOR(n) ((n) << 18) /**< @brief Temperature Sensor
sampling time. */
#define ADC_SMPR1_SMP_VREF(n) ((n) << 21) /**< @brief Voltage Reference
sampling time. */
#define ADC_SMPR1_SMP_VBAT(n) ((n) << 24) /**< @brief VBAT sampling time. */
/** @} */
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if STM32_ADC_USE_ADC1 && !defined(__DOXYGEN__)
extern ADCDriver ADCD1;
#endif
#if STM32_ADC_USE_ADC2 && !defined(__DOXYGEN__)
extern ADCDriver ADCD2;
#endif
#if STM32_ADC_USE_ADC3 && !defined(__DOXYGEN__)
extern ADCDriver ADCD3;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void adc_lld_init(void);
void adc_lld_start(ADCDriver *adcp);
void adc_lld_stop(ADCDriver *adcp);
void adc_lld_start_conversion(ADCDriver *adcp);
void adc_lld_stop_conversion(ADCDriver *adcp);
void adcSTM32EnableTSVREFE(void);
void adcSTM32DisableTSVREFE(void);
void adcSTM32EnableVBATE(void);
void adcSTM32DisableVBATE(void);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_ADC */
#endif /* _ADC_LLD_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink