mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-12-14 20:18:13 +00:00
292 lines
9.0 KiB
C
Executable File
292 lines
9.0 KiB
C
Executable File
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32L1xx/adc_lld.c
|
|
* @brief STM32L1xx ADC subsystem low level driver source.
|
|
*
|
|
* @addtogroup ADC
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#if HAL_USE_ADC || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/** @brief ADC1 driver identifier.*/
|
|
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
|
|
ADCDriver ADCD1;
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief ADC DMA ISR service routine.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
* @param[in] flags pre-shifted content of the ISR register
|
|
*/
|
|
static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
|
|
|
|
/* DMA errors handling.*/
|
|
if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
|
|
/* DMA, this could help only if the DMA tries to access an unmapped
|
|
address space or violates alignment rules.*/
|
|
_adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
|
|
}
|
|
else {
|
|
/* It is possible that the conversion group has already be reset by the
|
|
ADC error handler, in this case this interrupt is spurious.*/
|
|
if (adcp->grpp != NULL) {
|
|
if ((flags & STM32_DMA_ISR_TCIF) != 0) {
|
|
/* Transfer complete processing.*/
|
|
_adc_isr_full_code(adcp);
|
|
}
|
|
else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
|
|
/* Half transfer processing.*/
|
|
_adc_isr_half_code(adcp);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief ADC interrupt handler.
|
|
*
|
|
* @isr
|
|
*/
|
|
CH_IRQ_HANDLER(ADC1_IRQHandler) {
|
|
uint32_t sr;
|
|
|
|
CH_IRQ_PROLOGUE();
|
|
|
|
sr = ADC1->SR;
|
|
ADC1->SR = 0;
|
|
/* Note, an overflow may occur after the conversion ended before the driver
|
|
is able to stop the ADC, this is why the DMA channel is checked too.*/
|
|
if ((sr & ADC_SR_OVR) && (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
|
|
/* ADC overflow condition, this could happen only if the DMA is unable
|
|
to read data fast enough.*/
|
|
if (ADCD1.grpp != NULL)
|
|
_adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
|
|
}
|
|
/* TODO: Add here analog watchdog handling.*/
|
|
|
|
CH_IRQ_EPILOGUE();
|
|
}
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level ADC driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_init(void) {
|
|
|
|
#if STM32_ADC_USE_ADC1
|
|
/* Driver initialization.*/
|
|
adcObjectInit(&ADCD1);
|
|
ADCD1.adc = ADC1;
|
|
ADCD1.dmastp = STM32_DMA1_STREAM1;
|
|
ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
|
|
STM32_DMA_CR_DIR_P2M |
|
|
STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
|
|
STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
|
|
STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
|
|
#endif
|
|
|
|
/* The shared vector is initialized on driver initialization and never
|
|
disabled.*/
|
|
nvicEnableVector(ADC1_IRQn, CORTEX_PRIORITY_MASK(STM32_ADC_IRQ_PRIORITY));
|
|
}
|
|
|
|
/**
|
|
* @brief Configures and activates the ADC peripheral.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_start(ADCDriver *adcp) {
|
|
|
|
/* If in stopped state then enables the ADC and DMA clocks.*/
|
|
if (adcp->state == ADC_STOP) {
|
|
#if STM32_ADC_USE_ADC1
|
|
if (&ADCD1 == adcp) {
|
|
bool_t b;
|
|
b = dmaStreamAllocate(adcp->dmastp,
|
|
STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
|
|
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
|
|
(void *)adcp);
|
|
chDbgAssert(!b, "adc_lld_start(), #1", "stream already allocated");
|
|
dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
|
|
rccEnableADC1(FALSE);
|
|
}
|
|
#endif /* STM32_ADC_USE_ADC1 */
|
|
|
|
/* ADC initial setup, starting the analog part here in order to reduce
|
|
the latency when starting a conversion.*/
|
|
adcp->adc->CR1 = 0;
|
|
adcp->adc->CR2 = 0;
|
|
adcp->adc->CR2 = ADC_CR2_ADON;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Deactivates the ADC peripheral.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_stop(ADCDriver *adcp) {
|
|
|
|
/* If in ready state then disables the ADC clock and analog part.*/
|
|
if (adcp->state == ADC_READY) {
|
|
dmaStreamRelease(adcp->dmastp);
|
|
adcp->adc->CR1 = 0;
|
|
adcp->adc->CR2 = 0;
|
|
|
|
#if STM32_ADC_USE_ADC1
|
|
if (&ADCD1 == adcp)
|
|
rccDisableADC1(FALSE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Starts an ADC conversion.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_start_conversion(ADCDriver *adcp) {
|
|
uint32_t mode;
|
|
uint32_t cr2;
|
|
const ADCConversionGroup *grpp = adcp->grpp;
|
|
|
|
/* DMA setup.*/
|
|
mode = adcp->dmamode;
|
|
if (grpp->circular) {
|
|
mode |= STM32_DMA_CR_CIRC;
|
|
if (adcp->depth > 1) {
|
|
/* If circular buffer depth > 1, then the half transfer interrupt
|
|
is enabled in order to allow streaming processing.*/
|
|
mode |= STM32_DMA_CR_HTIE;
|
|
}
|
|
}
|
|
dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
|
|
dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
|
|
(uint32_t)adcp->depth);
|
|
dmaStreamSetMode(adcp->dmastp, mode);
|
|
dmaStreamEnable(adcp->dmastp);
|
|
|
|
/* ADC setup.*/
|
|
adcp->adc->SR = 0;
|
|
adcp->adc->SMPR1 = grpp->smpr1;
|
|
adcp->adc->SMPR2 = grpp->smpr2;
|
|
adcp->adc->SMPR3 = grpp->smpr3;
|
|
adcp->adc->SQR1 = grpp->sqr1;
|
|
adcp->adc->SQR2 = grpp->sqr2;
|
|
adcp->adc->SQR3 = grpp->sqr3;
|
|
adcp->adc->SQR4 = grpp->sqr4;
|
|
adcp->adc->SQR5 = grpp->sqr5;
|
|
|
|
/* ADC configuration and start.*/
|
|
adcp->adc->CR1 = grpp->cr1 | ADC_CR1_OVRIE | ADC_CR1_SCAN;
|
|
|
|
/* Enforcing the mandatory bits in CR2.*/
|
|
cr2 = grpp->cr2 | ADC_CR2_DMA | ADC_CR2_DDS | ADC_CR2_ADON;
|
|
|
|
/* The start method is different dependign if HW or SW triggered, the
|
|
start is performed using the method specified in the CR2 configuration.*/
|
|
if ((cr2 & ADC_CR2_SWSTART) != 0) {
|
|
/* Initializing CR2 while keeping ADC_CR2_SWSTART at zero.*/
|
|
adcp->adc->CR2 = (cr2 | ADC_CR2_CONT) & ~ADC_CR2_SWSTART;
|
|
|
|
/* Finally enabling ADC_CR2_SWSTART.*/
|
|
adcp->adc->CR2 = (cr2 | ADC_CR2_CONT);
|
|
}
|
|
else
|
|
adcp->adc->CR2 = cr2;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops an ongoing conversion.
|
|
*
|
|
* @param[in] adcp pointer to the @p ADCDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void adc_lld_stop_conversion(ADCDriver *adcp) {
|
|
|
|
dmaStreamDisable(adcp->dmastp);
|
|
adcp->adc->CR1 = 0;
|
|
adcp->adc->CR2 = 0;
|
|
adcp->adc->CR2 = ADC_CR2_ADON;
|
|
}
|
|
|
|
/**
|
|
* @brief Enables the TSVREFE bit.
|
|
* @details The TSVREFE bit is required in order to sample the internal
|
|
* temperature sensor and internal reference voltage.
|
|
* @note This is an STM32-only functionality.
|
|
*/
|
|
void adcSTM32EnableTSVREFE(void) {
|
|
|
|
ADC->CCR |= ADC_CCR_TSVREFE;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables the TSVREFE bit.
|
|
* @details The TSVREFE bit is required in order to sample the internal
|
|
* temperature sensor and internal reference voltage.
|
|
* @note This is an STM32-only functionality.
|
|
*/
|
|
void adcSTM32DisableTSVREFE(void) {
|
|
|
|
ADC->CCR &= ~ADC_CCR_TSVREFE;
|
|
}
|
|
|
|
#endif /* HAL_USE_ADC */
|
|
|
|
/** @} */
|