mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-12-23 16:37:43 +00:00
241 lines
12 KiB
Plaintext
Executable File
241 lines
12 KiB
Plaintext
Executable File
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
|
2011,2012,2013 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
---
|
|
|
|
A special exception to the GPL can be applied should you wish to distribute
|
|
a combined work that includes ChibiOS/RT, without being obliged to provide
|
|
the source code for any proprietary components. See the file exception.txt
|
|
for full details of how and when the exception can be applied.
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx ARM Cortex-Mx
|
|
* @details ARM Cortex-Mx port for the RVCT compiler.
|
|
|
|
* @section RVCT_ARMCMx_INTRO Introduction
|
|
* This port supports all the cores implementing the ARMv6-M and ARMv7-M
|
|
* architectures.
|
|
*
|
|
* @section RVCT_ARMCMx_MODES Kernel Modes
|
|
* The Cortex-Mx port supports two distinct kernel modes:
|
|
* - <b>Advanced Kernel</b> mode. In this mode the kernel only masks
|
|
* interrupt sources with priorities below or equal to the
|
|
* @p CORTEX_BASEPRI_KERNEL level. Higher priorities are not affected by
|
|
* the kernel critical sections and can be used for fast interrupts.
|
|
* This mode is not available in the ARMv6-M architecture which does not
|
|
* support priority masking.
|
|
* - <b>Compact Kernel</b> mode. In this mode the kernel handles IRQ priorities
|
|
* in a simplified way, all interrupt sources are disabled when the kernel
|
|
* enters into a critical zone and re-enabled on exit. This is simple and
|
|
* adequate for most applications, this mode results in a more compact and
|
|
* faster kernel.
|
|
* .
|
|
* The selection of the mode is performed using the port configuration option
|
|
* @p CORTEX_SIMPLIFIED_PRIORITY. Apart from the different handling of
|
|
* interrupts there are no other differences between the two modes. The
|
|
* kernel API is exactly the same.
|
|
*
|
|
* @section RVCT_ARMCMx_STATES_A System logical states in Compact Kernel mode
|
|
* The ChibiOS/RT logical @ref system_states are mapped as follow in Compact
|
|
* Kernel mode:
|
|
* - <b>Init</b>. This state is represented by the startup code and the
|
|
* initialization code before @p chSysInit() is executed. It has not a
|
|
* special hardware state associated.
|
|
* - <b>Normal</b>. This is the state the system has after executing
|
|
* @p chSysInit(). In this state interrupts are enabled. The processor
|
|
* is running in thread-privileged mode.
|
|
* - <b>Suspended</b>. In this state the interrupt sources are globally
|
|
* disabled. The processor is running in thread-privileged mode. In this
|
|
* mode this state is not different from the <b>Disabled</b> state.
|
|
* - <b>Disabled</b>. In this state the interrupt sources are globally
|
|
* disabled. The processor is running in thread-privileged mode. In this
|
|
* mode this state is not different from the <b>Suspended</b> state.
|
|
* - <b>Sleep</b>. This state is entered with the execution of the specific
|
|
* instruction @p <b>wfi</b>.
|
|
* - <b>S-Locked</b>. In this state the interrupt sources are globally
|
|
* disabled. The processor is running in thread-privileged mode.
|
|
* - <b>I-Locked</b>. In this state the interrupt sources are globally
|
|
* disabled. The processor is running in exception-privileged mode.
|
|
* - <b>Serving Regular Interrupt</b>. In this state the interrupt sources are
|
|
* not globally masked but only interrupts with higher priority can preempt
|
|
* the current handler. The processor is running in exception-privileged
|
|
* mode.
|
|
* - <b>Serving Fast Interrupt</b>. Not implemented in compact kernel mode.
|
|
* - <b>Serving Non-Maskable Interrupt</b>. The Cortex-Mx has a specific
|
|
* asynchronous NMI vector and several synchronous fault vectors that can
|
|
* be considered belonging to this category.
|
|
* - <b>Halted</b>. Implemented as an infinite loop after globally masking all
|
|
* the maskable interrupt sources. The ARM state is whatever the processor
|
|
* was running when @p chSysHalt() was invoked.
|
|
*
|
|
* @section RVCT_ARMCMx_STATES_B System logical states in Advanced Kernel mode
|
|
* The ChibiOS/RT logical @ref system_states are mapped as follow in the
|
|
* Advanced Kernel mode:
|
|
* - <b>Init</b>. This state is represented by the startup code and the
|
|
* initialization code before @p chSysInit() is executed. It has not a
|
|
* special hardware state associated.
|
|
* - <b>Normal</b>. This is the state the system has after executing
|
|
* @p chSysInit(). In this state the ARM Cortex-Mx has the BASEPRI register
|
|
* set at @p CORTEX_BASEPRI_USER level, interrupts are not masked. The
|
|
* processor is running in thread-privileged mode.
|
|
* - <b>Suspended</b>. In this state the interrupt sources are not globally
|
|
* masked but the BASEPRI register is set to @p CORTEX_BASEPRI_KERNEL thus
|
|
* masking any interrupt source with lower or equal priority. The processor
|
|
* is running in thread-privileged mode.
|
|
* - <b>Disabled</b>. Interrupt sources are globally masked. The processor
|
|
* is running in thread-privileged mode.
|
|
* - <b>Sleep</b>. This state is entered with the execution of the specific
|
|
* instruction @p <b>wfi</b>.
|
|
* - <b>S-Locked</b>. In this state the interrupt sources are not globally
|
|
* masked but the BASEPRI register is set to @p CORTEX_BASEPRI_KERNEL thus
|
|
* masking any interrupt source with lower or equal priority. The processor
|
|
* is running in thread-privileged mode.
|
|
* - <b>I-Locked</b>. In this state the interrupt sources are not globally
|
|
* masked but the BASEPRI register is set to @p CORTEX_BASEPRI_KERNEL thus
|
|
* masking any interrupt source with lower or equal priority. The processor
|
|
* is running in exception-privileged mode.
|
|
* - <b>Serving Regular Interrupt</b>. In this state the interrupt sources are
|
|
* not globally masked but only interrupts with higher priority can preempt
|
|
* the current handler. The processor is running in exception-privileged
|
|
* mode.
|
|
* - <b>Serving Fast Interrupt</b>. Fast interrupts are defined as interrupt
|
|
* sources having higher priority level than the kernel
|
|
* (@p CORTEX_BASEPRI_KERNEL). In this state is not possible to switch to
|
|
* the I-Locked state because fast interrupts can preempt the kernel
|
|
* critical zone.<br>
|
|
* This state is not implemented in the ARMv6-M implementation because
|
|
* priority masking is not present in this architecture.
|
|
* - <b>Serving Non-Maskable Interrupt</b>. The Cortex-Mx has a specific
|
|
* asynchronous NMI vector and several synchronous fault vectors that can
|
|
* be considered belonging to this category.
|
|
* - <b>Halted</b>. Implemented as an infinite loop after globally masking all
|
|
* the maskable interrupt sources. The ARM state is whatever the processor
|
|
* was running when @p chSysHalt() was invoked.
|
|
* .
|
|
* @section RVCT_ARMCMx_NOTES ARM Cortex-Mx/RVCT port notes
|
|
* The ARM Cortex-Mx port is organized as follow:
|
|
* - The @p main() function is invoked in thread-privileged mode.
|
|
* - Each thread has a private process stack, the system has a single main
|
|
* stack where all the interrupts and exceptions are processed.
|
|
* - The threads are started in thread-privileged mode.
|
|
* - Interrupt nesting and the other advanced core/NVIC features are supported.
|
|
* - The Cortex-Mx port is perfectly generic, support for more devices can be
|
|
* easily added by adding a subdirectory under <tt>./os/ports/RVCT/ARMCMx</tt>
|
|
* and giving it the name of the new device, then copy the files from another
|
|
* device into the new directory and customize them for the new device.
|
|
* - The free uVision is not able to handle scatter files, the following
|
|
* options are required in the project options under "Preprocesso symbols"
|
|
* in order to use the unused RAM as heap automatically:
|
|
* <tt>__heap_base__=Image$$RW_IRAM1$$ZI$$Limit
|
|
* __heap_end__=Image$$RW_IRAM2$$Base</tt>
|
|
* .
|
|
* @ingroup rvct
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_CONF Configuration Options
|
|
* @details ARM Cortex-Mx Configuration Options. The ARMCMx port allows some
|
|
* architecture-specific configurations settings that can be overridden
|
|
* by redefining them in @p chconf.h. Usually there is no need to change
|
|
* the default values.
|
|
* - @p INT_REQUIRED_STACK, this value represent the amount of stack space used
|
|
* by an interrupt handler between the @p extctx and @p intctx
|
|
* structures.
|
|
* - @p IDLE_THREAD_STACK_SIZE, stack area size to be assigned to the IDLE
|
|
* thread. Usually there is no need to change this value unless inserting
|
|
* code in the IDLE thread using the @p IDLE_LOOP_HOOK hook macro.
|
|
* - @p CORTEX_PRIORITY_SYSTICK, priority of the SYSTICK handler.
|
|
* - @p CORTEX_PRIORITY_PENDSV, priority of the PENDSV handler.
|
|
* - @p CORTEX_ENABLE_WFI_IDLE, if set to @p TRUE enables the use of the
|
|
* @p <b>wfi</b> instruction from within the idle loop. This option is
|
|
* defaulted to FALSE because it can create problems with some debuggers.
|
|
* Setting this option to TRUE reduces the system power requirements.
|
|
* .
|
|
* @section RVCT_ARMCMx_CONF_1 ARMv6-M specific options
|
|
* The following options are specific for the ARMv6-M architecture:
|
|
* - @p CORTEX_ALTERNATE_SWITCH, when activated makes the OS use the PendSV
|
|
* exception instead of NMI as preemption handler.
|
|
* .
|
|
* @section RVCT_ARMCMx_CONF_2 ARMv7-M specific options
|
|
* The following options are specific for the ARMv6-M architecture:
|
|
* - @p CORTEX_PRIORITY_SVCALL, priority of the SVCALL handler.
|
|
* - @p CORTEX_SIMPLIFIED_PRIORITY, when enabled activates the Compact kernel
|
|
* mode.
|
|
* .
|
|
* @ingroup RVCT_ARMCMx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_CORE Core Port Implementation
|
|
* @details ARM Cortex-Mx specific port code, structures and macros.
|
|
*
|
|
* @ingroup RVCT_ARMCMx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_V6M_CORE ARMv6-M Specific Implementation
|
|
* @details ARMv6-M specific port code, structures and macros.
|
|
*
|
|
* @ingroup RVCT_ARMCMx_CORE
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_V7M_CORE ARMv7-M Specific Implementation
|
|
* @details ARMv7-M specific port code, structures and macros.
|
|
*
|
|
* @ingroup RVCT_ARMCMx_CORE
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_STARTUP Startup Support
|
|
* @details ChibiOS/RT provides its own generic startup file for the ARM
|
|
* Cortex-Mx port.
|
|
* Of course it is not mandatory to use it but care should be taken about the
|
|
* startup phase details.
|
|
*
|
|
* @section RVCT_ARMCMx_STARTUP_1 Startup Process
|
|
* The startup process, as implemented, is the following:
|
|
* -# Interrupts are masked globally.
|
|
* -# The two stacks are initialized by assigning them the sizes defined in
|
|
* <tt>cstartup.s</tt> file and accessible through the configuration wizard.
|
|
* -# The CPU state is switched to Privileged and the PSP stack is used.
|
|
* -# An early initialization routine @p __early_init() is invoked, if the
|
|
* symbol is not defined then an empty default routine is executed
|
|
* (weak symbol).
|
|
* -# Control is passed to the C runtime entry point @p __main that performs
|
|
* the required initializations before invoking the @p main() function.
|
|
* .
|
|
* @ingroup RVCT_ARMCMx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_NVIC NVIC Support
|
|
* @details ARM Cortex-Mx NVIC support.
|
|
*
|
|
* @ingroup RVCT_ARMCMx
|
|
*/
|
|
|
|
/**
|
|
* @defgroup RVCT_ARMCMx_SPECIFIC Specific Implementations
|
|
* @details Platform-specific port code.
|
|
*
|
|
* @ingroup RVCT_ARMCMx
|
|
*/
|