TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-12-15 12:38:11 +00:00
Code Issues Packages Projects Releases Wiki Activity
ea2cfb7ad2
mayhem-firmware/firmware/chibios/os/hal/platforms/AT91SAM7/serial_lld.c

445 lines
13 KiB
C
Executable File
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file AT91SAM7/serial_lld.c
* @brief AT91SAM7 low level serial driver code.
*
* @addtogroup SERIAL
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
#if (SAM7_PLATFORM == SAM7S64) || (SAM7_PLATFORM == SAM7S128) || \
(SAM7_PLATFORM == SAM7S256) || (SAM7_PLATFORM == SAM7S512)
#define SAM7_USART0_RX AT91C_PA5_RXD0
#define SAM7_USART0_TX AT91C_PA6_TXD0
#define SAM7_USART1_RX AT91C_PA21_RXD1
#define SAM7_USART1_TX AT91C_PA22_TXD1
#define SAM7_DBGU_RX AT91C_PA9_DRXD
#define SAM7_DBGU_TX AT91C_PA10_DTXD
#elif (SAM7_PLATFORM == SAM7X128) || (SAM7_PLATFORM == SAM7X256) || \
(SAM7_PLATFORM == SAM7X512)
#define SAM7_USART0_RX AT91C_PA0_RXD0
#define SAM7_USART0_TX AT91C_PA1_TXD0
#define SAM7_USART1_RX AT91C_PA5_RXD1
#define SAM7_USART1_TX AT91C_PA6_TXD1
#define SAM7_DBGU_RX AT91C_PA27_DRXD
#define SAM7_DBGU_TX AT91C_PA28_DTXD
#elif (SAM7_PLATFORM == SAM7A3)
#define SAM7_USART0_RX AT91C_PA2_RXD0
#define SAM7_USART0_TX AT91C_PA3_TXD0
#define SAM7_USART1_RX AT91C_PA7_RXD1
#define SAM7_USART1_TX AT91C_PA8_TXD1
#define SAM7_USART2_RX AT91C_PA9_RXD2
#define SAM7_USART2_TX AT91C_PA10_TXD2
#define SAM7_DBGU_RX AT91C_PA30_DRXD
#define SAM7_DBGU_TX AT91C_PA31_DTXD
#else
#error "serial lines not defined for this SAM7 version"
#endif /* HAL_USE_SERIAL */
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
/** @brief USART0 serial driver identifier.*/
SerialDriver SD1;
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
/** @brief USART1 serial driver identifier.*/
SerialDriver SD2;
#endif
#if (SAM7_PLATFORM == SAM7A3)
#if USE_SAM7_USART2 || defined(__DOXYGEN__)
/** @brief USART2 serial driver identifier.*/
SerialDriver SD3;
#endif
#endif
#if USE_SAM7_DBGU_UART || defined(__DOXYGEN__)
/** @brief DBGU_UART serial driver identifier.*/
SerialDriver SDDBG;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/** @brief Driver default configuration.*/
static const SerialConfig default_config = {
SERIAL_DEFAULT_BITRATE,
AT91C_US_USMODE_NORMAL | AT91C_US_CLKS_CLOCK |
AT91C_US_CHRL_8_BITS | AT91C_US_PAR_NONE | AT91C_US_NBSTOP_1_BIT
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief USART initialization.
*
* @param[in] sdp communication channel associated to the USART
* @param[in] config the architecture-dependent serial driver configuration
*/
static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
AT91PS_USART u = sdp->usart;
/* Disables IRQ sources and stop operations.*/
u->US_IDR = 0xFFFFFFFF;
u->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RSTSTA;
/* New parameters setup.*/
if (config->sc_mr & AT91C_US_OVER)
u->US_BRGR = MCK / (config->sc_speed * 8);
else
u->US_BRGR = MCK / (config->sc_speed * 16);
u->US_MR = config->sc_mr;
u->US_RTOR = 0;
u->US_TTGR = 0;
/* Enables operations and IRQ sources.*/
u->US_CR = AT91C_US_RXEN | AT91C_US_TXEN | AT91C_US_DTREN | AT91C_US_RTSEN;
u->US_IER = AT91C_US_RXRDY | AT91C_US_OVRE | AT91C_US_FRAME | AT91C_US_PARE |
AT91C_US_RXBRK;
}
/**
* @brief USART de-initialization.
*
* @param[in] u pointer to an USART I/O block
*/
static void usart_deinit(AT91PS_USART u) {
/* Disables IRQ sources and stop operations.*/
u->US_IDR = 0xFFFFFFFF;
u->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RSTSTA;
u->US_MR = 0;
u->US_RTOR = 0;
u->US_TTGR = 0;
}
/**
* @brief Error handling routine.
*
* @param[in] err USART CSR register value
* @param[in] sdp communication channel associated to the USART
*/
static void set_error(SerialDriver *sdp, AT91_REG csr) {
flagsmask_t sts = 0;
if (csr & AT91C_US_OVRE)
sts |= SD_OVERRUN_ERROR;
if (csr & AT91C_US_PARE)
sts |= SD_PARITY_ERROR;
if (csr & AT91C_US_FRAME)
sts |= SD_FRAMING_ERROR;
if (csr & AT91C_US_RXBRK)
sts |= SD_BREAK_DETECTED;
chSysLockFromIsr();
chnAddFlagsI(sdp, sts);
chSysUnlockFromIsr();
}
#if defined(__GNUC__)
__attribute__((noinline))
#endif
#if !USE_SAM7_DBGU_UART
static
#endif
/**
* @brief Common IRQ handler.
*
* @param[in] sdp communication channel associated to the USART
*/
void sd_lld_serve_interrupt(SerialDriver *sdp) {
uint32_t csr;
AT91PS_USART u = sdp->usart;
csr = u->US_CSR;
if (csr & AT91C_US_RXRDY) {
chSysLockFromIsr();
sdIncomingDataI(sdp, u->US_RHR);
chSysUnlockFromIsr();
}
if ((u->US_IMR & AT91C_US_TXRDY) && (csr & AT91C_US_TXRDY)) {
msg_t b;
chSysLockFromIsr();
b = chOQGetI(&sdp->oqueue);
if (b < Q_OK) {
chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
u->US_IDR = AT91C_US_TXRDY;
}
else
u->US_THR = b;
chSysUnlockFromIsr();
}
csr &= (AT91C_US_OVRE | AT91C_US_FRAME | AT91C_US_PARE | AT91C_US_RXBRK);
if (csr != 0) {
set_error(sdp, csr);
u->US_CR = AT91C_US_RSTSTA;
}
AT91C_BASE_AIC->AIC_EOICR = 0;
}
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
static void notify1(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US0->US_IER = AT91C_US_TXRDY;
}
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
static void notify2(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US1->US_IER = AT91C_US_TXRDY;
}
#endif
#if (SAM7_PLATFORM == SAM7A3)
#if USE_SAM7_USART2 || defined(__DOXYGEN__)
static void notify3(GenericQueue *qp) {
(void)qp;
AT91C_BASE_US2->US_IER = AT91C_US_TXRDY;
}
#endif
#endif /* (SAM7_PLATFORM == SAM7A3) */
#if USE_SAM7_DBGU_UART || defined(__DOXYGEN__)
static void notify_dbg(GenericQueue *qp) {
(void)qp;
AT91C_BASE_DBGU->DBGU_IER = AT91C_US_TXRDY;
}
#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if USE_SAM7_USART0 || defined(__DOXYGEN__)
/**
* @brief USART0 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART0IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD1);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
#if USE_SAM7_USART1 || defined(__DOXYGEN__)
/**
* @brief USART1 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART1IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD2);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
#if (SAM7_PLATFORM == SAM7A3)
#if USE_SAM7_USART2 || defined(__DOXYGEN__)
/**
* @brief USART2 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(USART2IrqHandler) {
CH_IRQ_PROLOGUE();
sd_lld_serve_interrupt(&SD3);
AT91C_BASE_AIC->AIC_EOICR = 0;
CH_IRQ_EPILOGUE();
}
#endif
#endif /* (SAM7_PLATFORM == SAM7A3) */
/* note - DBGU_UART IRQ is the SysIrq in board.c
since it's not vectored separately by the AIC.*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level serial driver initialization.
*
* @notapi
*/
void sd_lld_init(void) {
#if USE_SAM7_USART0
sdObjectInit(&SD1, NULL, notify1);
SD1.usart = AT91C_BASE_US0;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART0_RX | SAM7_USART0_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART0_RX | SAM7_USART0_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART0_RX | SAM7_USART0_TX;
AIC_ConfigureIT(AT91C_ID_US0,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART0_PRIORITY,
USART0IrqHandler);
#endif
#if USE_SAM7_USART1
sdObjectInit(&SD2, NULL, notify2);
SD2.usart = AT91C_BASE_US1;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART1_RX | SAM7_USART1_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART1_RX | SAM7_USART1_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART1_RX | SAM7_USART1_TX;
AIC_ConfigureIT(AT91C_ID_US1,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART1_PRIORITY,
USART1IrqHandler);
#endif
#if (SAM7_PLATFORM == SAM7A3)
#if USE_SAM7_USART2
sdObjectInit(&SD3, NULL, notify3);
SD3.usart = AT91C_BASE_US2;
AT91C_BASE_PIOA->PIO_PDR = SAM7_USART2_RX | SAM7_USART2_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_USART2_RX | SAM7_USART2_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_USART2_RX | SAM7_USART2_TX;
AIC_ConfigureIT(AT91C_ID_US2,
AT91C_AIC_SRCTYPE_HIGH_LEVEL | SAM7_USART2_PRIORITY,
USART2IrqHandler);
#endif
#endif /* (SAM7_PLATFORM == SAM7A3) */
#if USE_SAM7_DBGU_UART
sdObjectInit(&SDDBG, NULL, notify_dbg);
/* this is a little cheap, but OK for now since there's enough overlap
between dbgu and usart register maps. it means we can reuse all the
same usart interrupt handling and config that already exists.*/
SDDBG.usart = (AT91PS_USART)AT91C_BASE_DBGU;
AT91C_BASE_PIOA->PIO_PDR = SAM7_DBGU_RX | SAM7_DBGU_TX;
AT91C_BASE_PIOA->PIO_ASR = SAM7_DBGU_RX | SAM7_DBGU_TX;
AT91C_BASE_PIOA->PIO_PPUDR = SAM7_DBGU_RX | SAM7_DBGU_TX;
#endif
}
/**
* @brief Low level serial driver configuration and (re)start.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration.
* If this parameter is set to @p NULL then a default
* configuration is used.
*
* @notapi
*/
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
if (config == NULL)
config = &default_config;
if (sdp->state == SD_STOP) {
#if USE_SAM7_USART0
if (&SD1 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US0);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US0);
}
#endif
#if USE_SAM7_USART1
if (&SD2 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US1);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US1);
}
#endif
#if (SAM7_PLATFORM == SAM7A3)
#if USE_SAM7_USART2
if (&SD3 == sdp) {
/* Starts the clock and clears possible sources of immediate interrupts.*/
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_US2);
/* Enables associated interrupt vector.*/
AIC_EnableIT(AT91C_ID_US2);
}
#endif
#endif /* (SAM7_PLATFORM == SAM7A3) */
/* Note - no explicit start for SD3 (DBGU_UART) since it's not included
in the AIC or PMC.*/
}
usart_init(sdp, config);
}
/**
* @brief Low level serial driver stop.
* @details De-initializes the USART, stops the associated clock, resets the
* interrupt vector.
*
* @param[in] sdp pointer to a @p SerialDriver object
*
* @notapi
*/
void sd_lld_stop(SerialDriver *sdp) {
if (sdp->state == SD_READY) {
usart_deinit(sdp->usart);
#if USE_SAM7_USART0
if (&SD1 == sdp) {
AT91C_BASE_PMC->PMC_PCDR = (1 << AT91C_ID_US0);
AIC_DisableIT(AT91C_ID_US0);
return;
}
#endif
#if USE_SAM7_USART1
if (&SD2 == sdp) {
AT91C_BASE_PMC->PMC_PCDR = (1 << AT91C_ID_US1);
AIC_DisableIT(AT91C_ID_US1);
return;
}
#endif
#if USE_SAM7_DBGU_UART
if (&SDDBG == sdp) {
AT91C_BASE_DBGU->DBGU_IDR = 0xFFFFFFFF;
return;
}
#endif
}
}
#endif /* HAL_USE_SERIAL */
/** @} */
Reference in New Issue View Git Blame Copy Permalink