mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-12-14 20:18:13 +00:00
28319652c1
* WIP Adding AudioVolumeField * Fix build break * Add Bernd to about --------- Co-authored-by: kallanreed <kallanreed@outlook.com>
629 lines
28 KiB
C++
629 lines
28 KiB
C++
/*
|
||
* Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
|
||
* Copyright (C) 2016 Furrtek
|
||
*
|
||
* This file is part of PortaPack.
|
||
*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation; either version 2, or (at your option)
|
||
* any later version.
|
||
*
|
||
* This program is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU General Public License for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License
|
||
* along with this program; see the file COPYING. If not, write to
|
||
* the Free Software Foundation, Inc., 51 Franklin Street,
|
||
* Boston, MA 02110-1301, USA.
|
||
*/
|
||
|
||
#include "ui_mictx.hpp"
|
||
|
||
#include "baseband_api.hpp"
|
||
#include "audio.hpp"
|
||
|
||
#include "wm8731.hpp"
|
||
using wolfson::wm8731::WM8731;
|
||
|
||
#include "tonesets.hpp"
|
||
#include "portapack_hal.hpp"
|
||
#include "cpld_update.hpp"
|
||
#include "string_format.hpp"
|
||
#include "irq_controls.hpp"
|
||
|
||
#include <cstring>
|
||
|
||
using namespace tonekey;
|
||
using namespace portapack;
|
||
|
||
WM8731 audio_codec_wm8731{i2c0, 0x1a};
|
||
|
||
namespace ui {
|
||
|
||
void MicTXView::focus() {
|
||
switch (focused_ui) {
|
||
case 0:
|
||
field_frequency.focus();
|
||
break;
|
||
case 1:
|
||
field_rxfrequency.focus();
|
||
break;
|
||
default:
|
||
field_va.focus();
|
||
break;
|
||
}
|
||
}
|
||
|
||
void MicTXView::update_vumeter() {
|
||
vumeter.set_value(audio_level);
|
||
}
|
||
|
||
void MicTXView::on_tx_progress(const bool done) {
|
||
// Roger beep played, stop transmitting
|
||
if (done)
|
||
set_tx(false);
|
||
}
|
||
|
||
void MicTXView::configure_baseband() {
|
||
baseband::set_audiotx_config(
|
||
sampling_rate / 20, // Update vu-meter at 20Hz
|
||
transmitting ? transmitter_model.channel_bandwidth() : 0,
|
||
mic_gain,
|
||
shift_bits_s16, // to be used in dsp_modulate
|
||
TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate),
|
||
enable_am,
|
||
enable_dsb,
|
||
enable_usb,
|
||
enable_lsb);
|
||
}
|
||
|
||
void MicTXView::set_tx(bool enable) {
|
||
if (enable) {
|
||
if (rx_enabled) // If audio RX is enabled
|
||
rxaudio(false); // Then turn off audio RX
|
||
transmitting = true;
|
||
configure_baseband();
|
||
transmitter_model.set_tuning_frequency(tx_frequency); // Now,no need: transmitter_model.set_tx_gain(tx_gain), nor (rf_amp);
|
||
transmitter_model.enable();
|
||
portapack::pin_i2s0_rx_sda.mode(3); // This is already done in audio::init but gets changed by the CPLD overlay reprogramming
|
||
} else {
|
||
if (transmitting && rogerbeep_enabled) {
|
||
baseband::request_beep(); // Transmit the roger beep
|
||
transmitting = false; // And flag the end of the transmission so ...
|
||
} else { // (if roger beep was enabled, this will be executed after the beep ends transmitting.
|
||
transmitting = false;
|
||
configure_baseband();
|
||
transmitter_model.disable();
|
||
if (rx_enabled) // If audio RX is enabled and we've been transmitting
|
||
rxaudio(true); // Turn back on audio RX
|
||
}
|
||
}
|
||
}
|
||
|
||
void MicTXView::do_timing() {
|
||
if (va_enabled) {
|
||
if (!transmitting) {
|
||
// Attack
|
||
if (audio_level >= va_level) {
|
||
if ((attack_timer >> 8) >= attack_ms) {
|
||
decay_timer = 0;
|
||
attack_timer = 0;
|
||
set_tx(true);
|
||
} else {
|
||
attack_timer += lcd_frame_duration;
|
||
}
|
||
} else {
|
||
attack_timer = 0;
|
||
}
|
||
} else {
|
||
// Decay
|
||
if (audio_level < va_level) {
|
||
if ((decay_timer >> 8) >= decay_ms) {
|
||
decay_timer = 0;
|
||
attack_timer = 0;
|
||
set_tx(false);
|
||
} else {
|
||
decay_timer += lcd_frame_duration;
|
||
}
|
||
} else {
|
||
decay_timer = 0;
|
||
}
|
||
}
|
||
} else {
|
||
// Check for PTT release
|
||
const auto switches_state = get_switches_state();
|
||
if (!switches_state[4] && transmitting && !button_touch) // Select button
|
||
set_tx(false);
|
||
}
|
||
}
|
||
|
||
/* Hmmmm. Maybe useless now.
|
||
void MicTXView::on_tuning_frequency_changed(rf::Frequency f) {
|
||
transmitter_model.set_tuning_frequency(f);
|
||
//if ( rx_enabled )
|
||
receiver_model.set_tuning_frequency(f); //Update freq also for RX
|
||
}
|
||
*/
|
||
|
||
void MicTXView::rxaudio(bool is_on) {
|
||
if (is_on) {
|
||
audio::input::stop();
|
||
baseband::shutdown();
|
||
|
||
if (enable_am || enable_usb || enable_lsb || enable_dsb) { // "NFM/FM",0 ," WFM ",1 , " AM ",2, " USB ", 3, " LSB ",4, " DSB-SC", 5
|
||
baseband::run_image(portapack::spi_flash::image_tag_am_audio);
|
||
receiver_model.set_modulation(ReceiverModel::Mode::AMAudio); // that AM demodulation engine is common to all Amplitude mod : AM/USB/LSB/DSB (2,3,4,5)
|
||
if (options_mode.selected_index() < 5) // We will be called here with 2,3,4,5 . We treat here demod. filter 2,3,4; (excluding DSB-C case (5) it is treated more down).
|
||
receiver_model.set_am_configuration(options_mode.selected_index() - 1); // selecting proper filter(2,3,4). 2-1=1=>6k-AM(1) , 3-1=2=>+3k-USB(2), 4-1=3=>-3K-LSB(3),
|
||
} else { // We are in NFM/FM or WFM (NFM BW:8k5 or 11k / FM BW 16k / WFM BW:200k)
|
||
|
||
if (enable_wfm) { // WFM , BW 200Khz aprox , or the two new addional BW filters (180k, 40k)
|
||
baseband::run_image(portapack::spi_flash::image_tag_wfm_audio);
|
||
receiver_model.set_modulation(ReceiverModel::Mode::WidebandFMAudio);
|
||
// receiver_model.set_wfm_configuration(n); // it is called above , depending user's selection (200k, 180k,40k).
|
||
} else { // NFM BW:8k5 or 11k / FM BW 16k
|
||
baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
|
||
receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); //
|
||
// receiver_model.set_nbfm_configuration(n); is called above , depending user's selection (8k5, 11k, 16k).
|
||
}
|
||
}
|
||
receiver_model.set_sampling_rate(3072000);
|
||
receiver_model.set_baseband_bandwidth(1750000);
|
||
// receiver_model.set_tuning_frequency(field_frequency.value()); //probably this too can be commented out.
|
||
if (bool_same_F_tx_rx_enabled) // when stop TX ,define to which freq RX we return
|
||
receiver_model.set_tuning_frequency(tx_frequency); // Update freq also for RX = TX
|
||
else
|
||
receiver_model.set_tuning_frequency(rx_frequency); // Now with seperate freq controls!
|
||
receiver_model.set_lna(rx_lna);
|
||
receiver_model.set_vga(rx_vga);
|
||
receiver_model.set_rf_amp(rx_amp);
|
||
receiver_model.enable();
|
||
hackrf::cpld::load_sram_no_verify(); // to have a good RX without any ghost inside Mic App
|
||
audio::output::start();
|
||
} else { // These incredibly convoluted steps are required for the vumeter to reappear when stopping RX.
|
||
receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); // This fixes something with AM RX...
|
||
receiver_model.disable();
|
||
baseband::shutdown();
|
||
|
||
baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
|
||
audio::output::stop();
|
||
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // When detected AK4951 => set up ALC mode; when detected WM8731 => set up mic_boost ON/OFF.
|
||
portapack::pin_i2s0_rx_sda.mode(3);
|
||
configure_baseband();
|
||
}
|
||
}
|
||
|
||
void MicTXView::set_ptt_visibility(bool v) {
|
||
tx_button.hidden(!v);
|
||
}
|
||
|
||
MicTXView::MicTXView(
|
||
NavigationView& nav) {
|
||
portapack::pin_i2s0_rx_sda.mode(3); // This is already done in audio::init but gets changed by the CPLD overlay reprogramming
|
||
|
||
baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
|
||
|
||
if (audio::debug::codec_name() == "WM8731") {
|
||
add_children({&labels_WM8731, // we have audio codec WM8731, same MIC menu as original.
|
||
&vumeter,
|
||
&options_gain, // MIC GAIN float factor on the GUI.
|
||
&options_wm8731_boost_mode,
|
||
// &check_va,
|
||
&field_va,
|
||
&field_va_level,
|
||
&field_va_attack,
|
||
&field_va_decay,
|
||
&field_bw,
|
||
&tx_view, // it already integrates previous rfgain, rfamp.
|
||
&options_mode,
|
||
&field_frequency,
|
||
&options_tone_key,
|
||
&check_rogerbeep,
|
||
&check_common_freq_tx_rx, // added to handle common or separate freq- TX/RX
|
||
&check_rxactive,
|
||
&field_volume,
|
||
&field_rxbw,
|
||
&field_squelch,
|
||
&field_rxfrequency,
|
||
&field_rxlna,
|
||
&field_rxvga,
|
||
&field_rxamp,
|
||
&tx_button});
|
||
|
||
} else {
|
||
add_children({&labels_AK4951, // we have audio codec AK4951, enable Automatic Level Control
|
||
&vumeter,
|
||
&options_gain,
|
||
&options_ak4951_alc_mode,
|
||
// &check_va,
|
||
&field_va,
|
||
&field_va_level,
|
||
&field_va_attack,
|
||
&field_va_decay,
|
||
&field_bw,
|
||
&tx_view, // it already integrates previous rfgain, rfamp.
|
||
&options_mode,
|
||
&field_frequency,
|
||
&options_tone_key,
|
||
&check_rogerbeep,
|
||
&check_common_freq_tx_rx, // added to handle common or separate freq- TX/RX
|
||
&check_rxactive,
|
||
&field_volume,
|
||
&field_rxbw,
|
||
&field_squelch,
|
||
&field_rxfrequency,
|
||
&field_rxlna,
|
||
&field_rxvga,
|
||
&field_rxamp,
|
||
&tx_button});
|
||
}
|
||
|
||
tone_keys_populate(options_tone_key);
|
||
options_tone_key.on_change = [this](size_t i, int32_t) {
|
||
tone_key_index = i;
|
||
};
|
||
options_tone_key.set_selected_index(0);
|
||
|
||
options_gain.on_change = [this](size_t, int32_t v) {
|
||
mic_gain = v / 10.0;
|
||
configure_baseband();
|
||
};
|
||
options_gain.set_selected_index(1); // x1.0 preselected default.
|
||
|
||
if (audio::debug::codec_name() == "WM8731") {
|
||
options_wm8731_boost_mode.on_change = [this](size_t, int8_t v) {
|
||
switch (v) {
|
||
case 0: // +12 dB’s respect reference level orig fw 1.5.x fw FM : when +20dB's boost ON) and shift bits (>>8),
|
||
shift_bits_s16 = 6; // now mic-boost on (+20dBs) and shift bits (>>6), +20+12=32 dB’s (orig fw +20 dBs+ 0dBs)=> +12dB's respect ref.
|
||
break;
|
||
case 1: // +06 dB’s reference level , (when +20dB's boost ON)
|
||
shift_bits_s16 = 7; // now mic-boost on (+20dBs) and shift bits (>>7), +20+06=26 dB’s (orig fw +20 dBs+ 0dBs) => +06dB's respect ref.
|
||
break;
|
||
case 2:
|
||
shift_bits_s16 = 4; // +04 dB’s respect ref level , (when +20dB's boost OFF)
|
||
break; // now mic-boost off (+00dBs) shift bits (4) (+0+24dB's)=24 dBs => +04dB's respect ref.
|
||
case 3:
|
||
shift_bits_s16 = 5; // -02 dB’s respect ref level , (when +20dB's boost OFF)
|
||
break; // now mic-boost off (+00dBs) shift bits (5) (+0+18dB's)=18 dBs => -02dB's respect ref.
|
||
case 4:
|
||
shift_bits_s16 = 6; // -08 dB’s respect ref level , (when +20dB's boost OFF)
|
||
break; // now mic-boost off (+00dBs) shift bits (6) (+0+12dB's)=12 dBs => -08dB's respect ref.
|
||
}
|
||
ak4951_alc_and_wm8731_boost_GUI = v; // 0,..4 WM8731_boost dB's options, (combination boost on/off , and effective gain in captured data >>x)
|
||
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // Detected (WM8731) , set up the proper wm_boost on/off , 0..4 (0,1) boost_on , (2,3,4) boost_0ff
|
||
configure_baseband(); // to update in real timme,sending msg , var-parameters >>shift_bits FM msg ,to audio_tx from M0 to M4 Proc -
|
||
};
|
||
options_wm8731_boost_mode.set_selected_index(3); // preset GUI index 3 as default WM -> -02 dB's .
|
||
} else {
|
||
shift_bits_s16 = 8; // Initialized default fixed >>8_FM for FM tx mod , shift audio data for AK4951 ,using top 8 bits s16 data (>>8)
|
||
options_ak4951_alc_mode.on_change = [this](size_t, int8_t v) {
|
||
ak4951_alc_and_wm8731_boost_GUI = v; // 0,..11, AK4951 Mic -Automatic volume Level Control options,
|
||
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // Detected (AK4951) ==> Set up proper ALC mode from 0..11 options
|
||
configure_baseband(); // sending fixed >>8_FM , var-parameters msg , to audiotx from this M0 to M4 process.
|
||
};
|
||
}
|
||
|
||
// options_ak4951_alc_mode.set_selected_index(0);
|
||
|
||
tx_frequency = transmitter_model.tuning_frequency();
|
||
field_frequency.set_value(transmitter_model.tuning_frequency());
|
||
field_frequency.set_step(receiver_model.frequency_step());
|
||
field_frequency.on_change = [this](rf::Frequency f) {
|
||
tx_frequency = f;
|
||
if (!rx_enabled) { // not activated receiver. just update freq TX
|
||
transmitter_model.set_tuning_frequency(f);
|
||
} else { // activated receiver.
|
||
if (bool_same_F_tx_rx_enabled) // user selected common freq- TX = RX
|
||
receiver_model.set_tuning_frequency(f); // Update common freq also for RX
|
||
}
|
||
};
|
||
field_frequency.on_edit = [this, &nav]() {
|
||
focused_ui = 0;
|
||
// TODO: Provide separate modal method/scheme?
|
||
auto new_view = nav.push<FrequencyKeypadView>(tx_frequency);
|
||
new_view->on_changed = [this](rf::Frequency f) {
|
||
tx_frequency = f;
|
||
if (!rx_enabled) {
|
||
transmitter_model.set_tuning_frequency(f);
|
||
} else {
|
||
if (bool_same_F_tx_rx_enabled)
|
||
receiver_model.set_tuning_frequency(f); // Update freq also for RX
|
||
}
|
||
this->field_frequency.set_value(f);
|
||
set_dirty();
|
||
};
|
||
};
|
||
|
||
field_bw.on_change = [this](uint32_t v) {
|
||
transmitter_model.set_channel_bandwidth(v * 1000);
|
||
};
|
||
field_bw.set_value(10); // pre-default first time, TX deviation FM for NFM / FM
|
||
|
||
// now , no need direct update , field_rfgain , field_rfamp (it is done in ui_transmitter.cpp)
|
||
|
||
options_mode.on_change = [this](size_t, int32_t v) { //{ "NFM/FM", 0 }, { " WFM ", 1 },{ "AM", 2 },{ "USB", 3 },{ "LSB", 4 },{ "DSB", 5 }
|
||
enable_am = false;
|
||
enable_usb = false;
|
||
enable_lsb = false;
|
||
enable_dsb = false;
|
||
enable_wfm = false;
|
||
|
||
using option_t = std::pair<std::string, int32_t>;
|
||
using options_t = std::vector<option_t>;
|
||
options_t rxbw; // Aux structure to change dynamically field_rxbw contents,
|
||
|
||
switch (v) {
|
||
case 0: //{ "FM", 0 }
|
||
enable_am = false;
|
||
enable_usb = false;
|
||
enable_lsb = false;
|
||
enable_dsb = false;
|
||
field_bw.set_value(10); // pre-default deviation FM for WFM
|
||
// field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
|
||
// if (rx_enabled)
|
||
rxaudio(rx_enabled); // Update now if we have RX audio on
|
||
options_tone_key.hidden(0); // we are in FM mode , we should have active the Key-tones & CTCSS option.
|
||
|
||
rxbw.emplace_back(" NFM1:8k5 ", 0); // restore the original dynamic field_rxbw value.
|
||
rxbw.emplace_back(" NFM2:11k ", 1);
|
||
rxbw.emplace_back(" FM :16k ", 2);
|
||
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
|
||
|
||
field_rxbw.hidden(0); // we are in FM mode, we need to allow the user set up of the RX NFM BW selection (8K5, 11K, 16K)
|
||
field_bw.hidden(0); // we are in FM mode, we need to allow FM deviation parameter , in non FM mode.
|
||
break;
|
||
case 1: //{ "WFM", 1 }
|
||
enable_am = false;
|
||
enable_usb = false;
|
||
enable_lsb = false;
|
||
enable_dsb = false;
|
||
enable_wfm = true;
|
||
field_bw.set_value(75); // pre-default deviation FM for WFM
|
||
// field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
|
||
// if (rx_enabled)
|
||
rxaudio(rx_enabled); // Update now if we have RX audio on
|
||
options_tone_key.hidden(0); // we are in WFM mode , we should have active the Key-tones & CTCSS option.
|
||
|
||
rxbw.emplace_back(" 200k-WFM ", 0); // We allow the user selection of the 3 x WFM BW filters, (0) WFM-200K, (1) WFM-180K , (2) WFM-40K .
|
||
rxbw.emplace_back(" 180k-WFM ", 1);
|
||
rxbw.emplace_back(" 40k-WFM ", 2);
|
||
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
|
||
|
||
field_rxbw.hidden(0); // we are in WFM mode, we need to show to the user the selected BW WFM filter .
|
||
field_bw.hidden(0); // we are in WFM mode, we need to allow WFM deviation parameter , in non FM mode.
|
||
break;
|
||
case 2: //{ "AM", 2 }
|
||
enable_am = true;
|
||
rxaudio(rx_enabled); // Update now if we have RX audio on
|
||
options_tone_key.set_selected_index(0); // we are NOT in FM mode , we reset the possible previous key-tones &CTCSS selection.
|
||
set_dirty(); // Refresh display
|
||
options_tone_key.hidden(1); // we hide that Key-tones & CTCSS input selecction, (no meaning in AM/DSB/SSB).
|
||
|
||
rxbw.emplace_back(" DSB1-9k ", 0); // we offer in AM DSB two audio BW 9k / 6k .
|
||
rxbw.emplace_back(" DSB2-6k ", 1);
|
||
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
|
||
|
||
field_rxbw.hidden(0); // we show fixed RX AM BW 6Khz
|
||
field_bw.hidden(1); // we hide the FM TX deviation parameter , in non FM mode.
|
||
check_rogerbeep.hidden(0); // make visible again the "rogerbeep" selection.
|
||
break;
|
||
case 3: //{ "USB", 3 }
|
||
enable_usb = true;
|
||
rxaudio(rx_enabled); // Update now if we have RX audio on
|
||
check_rogerbeep.set_value(false); // reset the possible activation of roger beep, because it is not compatible with SSB , by now.
|
||
check_rogerbeep.hidden(1); // hide that roger beep selection.
|
||
|
||
rxbw.emplace_back(" USB+3k ", 0); // locked a fixed option , to display it .
|
||
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
|
||
|
||
set_dirty(); // Refresh display
|
||
break;
|
||
case 4: //{ "LSB", 4 }
|
||
enable_lsb = true;
|
||
rxaudio(rx_enabled); // Update now if we have RX audio on
|
||
check_rogerbeep.set_value(false); // reset the possible activation of roger beep, because it is not compatible with SSB , by now.
|
||
check_rogerbeep.hidden(1); // hide that roger beep selection.
|
||
|
||
rxbw.emplace_back(" LSB-3k ", 0); // locked a fixed option , to display it .
|
||
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
|
||
|
||
set_dirty(); // Refresh display
|
||
break;
|
||
case 5: //{ "DSB-SC", 5 }
|
||
enable_dsb = true;
|
||
rxaudio(rx_enabled); // Update now if we have RX audio on
|
||
check_rogerbeep.hidden(0); // make visible again the "rogerbeep" selection.
|
||
|
||
rxbw.emplace_back("SSB1:USB+3k", 0); // added dynamically two options (index 0,1) to that DSB-C case to the field_rxbw value.
|
||
rxbw.emplace_back("SSB2:LSB-3k", 1);
|
||
|
||
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
|
||
|
||
break;
|
||
}
|
||
// configure_baseband();
|
||
};
|
||
|
||
/*
|
||
check_va.on_select = [this](Checkbox&, bool v) {
|
||
va_enabled = v;
|
||
text_ptt.hidden(v); //hide / show PTT text
|
||
check_rxactive.hidden(v); //hide / show the RX AUDIO
|
||
set_dirty(); //Refresh display
|
||
};
|
||
*/
|
||
field_va.set_selected_index(1);
|
||
field_va.on_change = [this](size_t, int32_t v) {
|
||
switch (v) {
|
||
case 0:
|
||
va_enabled = 0;
|
||
this->set_ptt_visibility(0);
|
||
check_rxactive.hidden(0);
|
||
ptt_enabled = 0;
|
||
break;
|
||
case 1:
|
||
va_enabled = 0;
|
||
this->set_ptt_visibility(1);
|
||
check_rxactive.hidden(0);
|
||
ptt_enabled = 1;
|
||
break;
|
||
case 2:
|
||
if (!rx_enabled) {
|
||
va_enabled = 1;
|
||
this->set_ptt_visibility(0);
|
||
check_rxactive.hidden(1);
|
||
ptt_enabled = 0;
|
||
} else {
|
||
field_va.set_selected_index(1);
|
||
}
|
||
break;
|
||
}
|
||
set_dirty();
|
||
};
|
||
|
||
check_rogerbeep.on_select = [this](Checkbox&, bool v) {
|
||
rogerbeep_enabled = v;
|
||
};
|
||
|
||
check_common_freq_tx_rx.on_select = [this](Checkbox&, bool v) {
|
||
bool_same_F_tx_rx_enabled = v;
|
||
field_rxfrequency.hidden(v); // Hide or show separated freq RX field . (When no hide user can enter down indep. freq for RX)
|
||
set_dirty(); // Refresh GUI interface
|
||
receiver_model.set_tuning_frequency(v ? tx_frequency : rx_frequency); // To go to the proper tuned freq. when toggling it
|
||
};
|
||
|
||
field_va_level.on_change = [this](int32_t v) {
|
||
va_level = v;
|
||
vumeter.set_mark(v);
|
||
};
|
||
field_va_level.set_value(40);
|
||
|
||
field_va_attack.on_change = [this](int32_t v) {
|
||
attack_ms = v;
|
||
};
|
||
field_va_attack.set_value(500);
|
||
|
||
field_va_decay.on_change = [this](int32_t v) {
|
||
decay_ms = v;
|
||
};
|
||
field_va_decay.set_value(1000);
|
||
|
||
check_rxactive.on_select = [this](Checkbox&, bool v) {
|
||
// vumeter.set_value(0); //Start with a clean vumeter
|
||
rx_enabled = v;
|
||
// check_va.hidden(v); //Hide or show voice activation
|
||
rxaudio(v); // Activate-Deactivate audio rx accordingly
|
||
set_dirty(); // Refresh interface
|
||
};
|
||
|
||
field_rxbw.on_change = [this](size_t, int32_t v) {
|
||
if (!(enable_am || enable_usb || enable_lsb || enable_dsb || enable_wfm)) {
|
||
// In Previous fw versions, that nbfm_configuration(n) was done in any mode (FM/AM/SSB/DSB)...strictly speaking only need it in (NFM/FM)
|
||
receiver_model.set_nbfm_configuration(v); // we are in NFM/FM case, we need to select proper NFM/FM RX channel filter , NFM BW 8K5(0), NFM BW 11K(1) , FM BW 16K (2)
|
||
} else { // we are not in NFM/FM mode .(we could be in any of the rest : AM /USB/LSB/DSB-SC)
|
||
if (enable_am) { // we are in AM TX mode , we will allow both independent RX audio BW : AM 9K (9K00AE3 / AM 6K (6K00AE3). (In AM option v can be 0 (9k) , 1 (6k)
|
||
receiver_model.set_am_configuration(v); // we are in AM TX mode , we need to select proper AM full path config AM-9K filter. 0+0 =>AM-9K(0), 0+1=1 =>AM-6K(1),
|
||
}
|
||
if (enable_dsb) { // we are in DSB-SC in TX mode , we will allow both independent RX SSB demodulation (USB / LSB side band). in that submenu, v is 0 (SSB1 USB) or 1 (SSB2 LSB)
|
||
receiver_model.set_am_configuration(v + 2); // we are in DSB-SC TX mode , we need to select proper SSB filter. 0+2 =>usb(2), 1+2=3 =>lsb(3),
|
||
}
|
||
if (enable_wfm) {
|
||
receiver_model.set_wfm_configuration(v); // we are in WFM case, we need to select proper WFB RX BW filter , WFM BW 200K(0), WFM BW 180K(1) , WFM BW 40K(2)
|
||
}
|
||
}
|
||
};
|
||
|
||
field_squelch.on_change = [this](int32_t v) {
|
||
receiver_model.set_squelch_level(100 - v);
|
||
};
|
||
field_squelch.set_value(0);
|
||
receiver_model.set_squelch_level(0);
|
||
|
||
rx_frequency = receiver_model.tuning_frequency();
|
||
field_rxfrequency.set_value(rx_frequency);
|
||
field_rxfrequency.set_step(receiver_model.frequency_step());
|
||
field_rxfrequency.on_change = [this](rf::Frequency f) { // available when field rxfrequency not hidden => user selected separated freq RX/TX-
|
||
rx_frequency = f;
|
||
if (rx_enabled)
|
||
receiver_model.set_tuning_frequency(f);
|
||
};
|
||
field_rxfrequency.on_edit = [this, &nav]() { // available when field rxfrequency not hidden => user selected separated freq RX/TX-
|
||
focused_ui = 1;
|
||
// TODO: Provide separate modal method/scheme?
|
||
auto new_view = nav.push<FrequencyKeypadView>(rx_frequency);
|
||
new_view->on_changed = [this](rf::Frequency f) {
|
||
rx_frequency = f;
|
||
if (rx_enabled)
|
||
receiver_model.set_tuning_frequency(f);
|
||
this->field_rxfrequency.set_value(f);
|
||
set_dirty();
|
||
};
|
||
};
|
||
|
||
rx_lna = receiver_model.lna();
|
||
field_rxlna.on_change = [this](int32_t v) {
|
||
rx_lna = v;
|
||
if (rx_enabled)
|
||
receiver_model.set_lna(v);
|
||
};
|
||
field_rxlna.set_value(rx_lna);
|
||
|
||
rx_vga = receiver_model.vga();
|
||
field_rxvga.on_change = [this](int32_t v) {
|
||
rx_vga = v;
|
||
if (rx_enabled)
|
||
receiver_model.set_vga(v);
|
||
};
|
||
field_rxvga.set_value(rx_vga);
|
||
|
||
rx_amp = receiver_model.rf_amp();
|
||
field_rxamp.on_change = [this](int32_t v) {
|
||
rx_amp = v;
|
||
if (rx_enabled)
|
||
receiver_model.set_rf_amp(rx_amp);
|
||
};
|
||
field_rxamp.set_value(rx_amp);
|
||
|
||
tx_button.on_select = [this](Button&) {
|
||
if (ptt_enabled && !transmitting) {
|
||
set_tx(true);
|
||
}
|
||
};
|
||
|
||
tx_button.on_touch_release = [this](Button&) {
|
||
if (button_touch) {
|
||
button_touch = false;
|
||
set_tx(false);
|
||
}
|
||
};
|
||
|
||
tx_button.on_touch_press = [this](Button&) {
|
||
if (!transmitting) {
|
||
button_touch = true;
|
||
}
|
||
};
|
||
|
||
transmitter_model.set_sampling_rate(sampling_rate);
|
||
transmitter_model.set_baseband_bandwidth(1750000);
|
||
|
||
set_tx(false);
|
||
|
||
audio::set_rate(audio::Rate::Hz_24000);
|
||
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // When detected AK4951 => set up ALC mode; when detected WM8731 => set up mic_boost ON/OFF.
|
||
}
|
||
|
||
MicTXView::~MicTXView() {
|
||
audio::input::stop();
|
||
transmitter_model.set_tuning_frequency(tx_frequency); // Save Tx frequency instead of Rx. Or maybe we need some "System Wide" changes to seperate Tx and Rx frequency.
|
||
transmitter_model.disable();
|
||
if (rx_enabled) // Also turn off audio rx if enabled
|
||
rxaudio(false);
|
||
hackrf::cpld::load_sram_no_verify(); // to leave all RX ok, without ghost signal problem at the exit .
|
||
baseband::shutdown(); // better this function at the end, not load_sram() that sometimes produces hang up.
|
||
}
|
||
|
||
} // namespace ui
|