mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-12-14 20:18:13 +00:00
361 lines
8.1 KiB
C
Executable File
361 lines
8.1 KiB
C
Executable File
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file AVR/serial_lld.c
|
|
* @brief AVR low level serial driver code.
|
|
*
|
|
* @addtogroup SERIAL
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief USART0 serial driver identifier.
|
|
* @note The name does not follow the convention used in the other ports
|
|
* (COMn) because a name conflict with the AVR headers.
|
|
*/
|
|
#if USE_AVR_USART0 || defined(__DOXYGEN__)
|
|
SerialDriver SD1;
|
|
#endif
|
|
|
|
/**
|
|
* @brief USART1 serial driver identifier.
|
|
* @note The name does not follow the convention used in the other ports
|
|
* (COMn) because a name conflict with the AVR headers.
|
|
*/
|
|
#if USE_AVR_USART1 || defined(__DOXYGEN__)
|
|
SerialDriver SD2;
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Driver default configuration.
|
|
*/
|
|
static const SerialConfig default_config = {
|
|
UBRR(SERIAL_DEFAULT_BITRATE),
|
|
USART_CHAR_SIZE_8
|
|
};
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
static void set_error(uint8_t sra, SerialDriver *sdp) {
|
|
flagsmask_t sts = 0;
|
|
uint8_t dor = 0;
|
|
uint8_t upe = 0;
|
|
uint8_t fe = 0;
|
|
|
|
#if USE_AVR_USART0
|
|
if (&SD1 == sdp) {
|
|
dor = (1 << DOR0);
|
|
upe = (1 << UPE0);
|
|
fe = (1 << FE0);
|
|
}
|
|
#endif
|
|
|
|
#if USE_AVR_USART1
|
|
if (&SD2 == sdp) {
|
|
dor = (1 << DOR1);
|
|
upe = (1 << UPE1);
|
|
fe = (1 << FE1);
|
|
}
|
|
#endif
|
|
|
|
if (sra & dor)
|
|
sts |= SD_OVERRUN_ERROR;
|
|
if (sra & upe)
|
|
sts |= SD_PARITY_ERROR;
|
|
if (sra & fe)
|
|
sts |= SD_FRAMING_ERROR;
|
|
chSysLockFromIsr();
|
|
chnAddFlagsI(sdp, sts);
|
|
chSysUnlockFromIsr();
|
|
}
|
|
|
|
#if USE_AVR_USART0 || defined(__DOXYGEN__)
|
|
static void notify1(GenericQueue *qp) {
|
|
|
|
(void)qp;
|
|
UCSR0B |= (1 << UDRIE0);
|
|
}
|
|
|
|
/**
|
|
* @brief USART0 initialization.
|
|
*
|
|
* @param[in] config the architecture-dependent serial driver configuration
|
|
*/
|
|
static void usart0_init(const SerialConfig *config) {
|
|
|
|
UBRR0L = config->sc_brr;
|
|
UBRR0H = config->sc_brr >> 8;
|
|
UCSR0A = 0;
|
|
UCSR0B = (1 << RXEN0) | (1 << TXEN0) | (1 << RXCIE0);
|
|
switch (config->sc_bits_per_char) {
|
|
case USART_CHAR_SIZE_5:
|
|
UCSR0C = 0;
|
|
break;
|
|
case USART_CHAR_SIZE_6:
|
|
UCSR0C = (1 << UCSZ00);
|
|
break;
|
|
case USART_CHAR_SIZE_7:
|
|
UCSR0C = (1 << UCSZ01);
|
|
break;
|
|
case USART_CHAR_SIZE_9:
|
|
UCSR0B |= (1 << UCSZ02);
|
|
UCSR0C = (1 << UCSZ00) | (1 << UCSZ01);
|
|
break;
|
|
case USART_CHAR_SIZE_8:
|
|
default:
|
|
UCSR0C = (1 << UCSZ00) | (1 << UCSZ01);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief USART0 de-initialization.
|
|
*/
|
|
static void usart0_deinit(void) {
|
|
|
|
UCSR0A = 0;
|
|
UCSR0B = 0;
|
|
UCSR0C = 0;
|
|
}
|
|
#endif
|
|
|
|
#if USE_AVR_USART1 || defined(__DOXYGEN__)
|
|
static void notify2(GenericQueue *qp) {
|
|
|
|
(void)qp;
|
|
UCSR1B |= (1 << UDRIE1);
|
|
}
|
|
|
|
/**
|
|
* @brief USART1 initialization.
|
|
*
|
|
* @param[in] config the architecture-dependent serial driver configuration
|
|
*/
|
|
static void usart1_init(const SerialConfig *config) {
|
|
|
|
UBRR1L = config->sc_brr;
|
|
UBRR1H = config->sc_brr >> 8;
|
|
UCSR1A = 0;
|
|
UCSR1B = (1 << RXEN1) | (1 << TXEN1) | (1 << RXCIE1);
|
|
switch (config->sc_bits_per_char) {
|
|
case USART_CHAR_SIZE_5:
|
|
UCSR1C = 0;
|
|
break;
|
|
case USART_CHAR_SIZE_6:
|
|
UCSR1C = (1 << UCSZ10);
|
|
break;
|
|
case USART_CHAR_SIZE_7:
|
|
UCSR1C = (1 << UCSZ11);
|
|
break;
|
|
case USART_CHAR_SIZE_9:
|
|
UCSR1B |= (1 << UCSZ12);
|
|
UCSR1C = (1 << UCSZ10) | (1 << UCSZ11);
|
|
break;
|
|
case USART_CHAR_SIZE_8:
|
|
default:
|
|
UCSR1C = (1 << UCSZ10) | (1 << UCSZ11);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief USART1 de-initialization.
|
|
*/
|
|
static void usart1_deinit(void) {
|
|
|
|
UCSR1A = 0;
|
|
UCSR1B = 0;
|
|
UCSR1C = 0;
|
|
}
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
#if USE_AVR_USART0 || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief USART0 RX interrupt handler.
|
|
*
|
|
* @isr
|
|
*/
|
|
CH_IRQ_HANDLER(USART0_RX_vect) {
|
|
uint8_t sra;
|
|
|
|
CH_IRQ_PROLOGUE();
|
|
|
|
sra = UCSR0A;
|
|
if (sra & ((1 << DOR0) | (1 << UPE0) | (1 << FE0)))
|
|
set_error(sra, &SD1);
|
|
chSysLockFromIsr();
|
|
sdIncomingDataI(&SD1, UDR0);
|
|
chSysUnlockFromIsr();
|
|
|
|
CH_IRQ_EPILOGUE();
|
|
}
|
|
|
|
/**
|
|
* @brief USART0 TX interrupt handler.
|
|
*
|
|
* @isr
|
|
*/
|
|
CH_IRQ_HANDLER(USART0_UDRE_vect) {
|
|
msg_t b;
|
|
|
|
CH_IRQ_PROLOGUE();
|
|
|
|
chSysLockFromIsr();
|
|
b = sdRequestDataI(&SD1);
|
|
chSysUnlockFromIsr();
|
|
if (b < Q_OK)
|
|
UCSR0B &= ~(1 << UDRIE0);
|
|
else
|
|
UDR0 = b;
|
|
|
|
CH_IRQ_EPILOGUE();
|
|
}
|
|
#endif /* USE_AVR_USART0 */
|
|
|
|
#if USE_AVR_USART1 || defined(__DOXYGEN__)
|
|
/**
|
|
* @brief USART1 RX interrupt handler.
|
|
*
|
|
* @isr
|
|
*/
|
|
CH_IRQ_HANDLER(USART1_RX_vect) {
|
|
uint8_t sra;
|
|
|
|
CH_IRQ_PROLOGUE();
|
|
|
|
sra = UCSR1A;
|
|
if (sra & ((1 << DOR1) | (1 << UPE1) | (1 << FE1)))
|
|
set_error(sra, &SD2);
|
|
chSysLockFromIsr();
|
|
sdIncomingDataI(&SD2, UDR1);
|
|
chSysUnlockFromIsr();
|
|
|
|
CH_IRQ_EPILOGUE();
|
|
}
|
|
|
|
/**
|
|
* @brief USART1 TX interrupt handler.
|
|
*
|
|
* @isr
|
|
*/
|
|
CH_IRQ_HANDLER(USART1_UDRE_vect) {
|
|
msg_t b;
|
|
|
|
CH_IRQ_PROLOGUE();
|
|
|
|
chSysLockFromIsr();
|
|
b = sdRequestDataI(&SD2);
|
|
chSysUnlockFromIsr();
|
|
if (b < Q_OK)
|
|
UCSR1B &= ~(1 << UDRIE1);
|
|
else
|
|
UDR1 = b;
|
|
|
|
CH_IRQ_EPILOGUE();
|
|
}
|
|
#endif /* USE_AVR_USART1 */
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level serial driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void sd_lld_init(void) {
|
|
|
|
#if USE_AVR_USART0
|
|
sdObjectInit(&SD1, NULL, notify1);
|
|
#endif
|
|
#if USE_AVR_USART1
|
|
sdObjectInit(&SD2, NULL, notify2);
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Low level serial driver configuration and (re)start.
|
|
*
|
|
* @param[in] sdp pointer to a @p SerialDriver object
|
|
* @param[in] config the architecture-dependent serial driver configuration.
|
|
* If this parameter is set to @p NULL then a default
|
|
* configuration is used.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
|
|
|
|
if (config == NULL)
|
|
config = &default_config;
|
|
|
|
#if USE_AVR_USART0
|
|
if (&SD1 == sdp) {
|
|
usart0_init(config);
|
|
return;
|
|
}
|
|
#endif
|
|
#if USE_AVR_USART1
|
|
if (&SD2 == sdp) {
|
|
usart1_init(config);
|
|
return;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Low level serial driver stop.
|
|
* @details De-initializes the USART, stops the associated clock, resets the
|
|
* interrupt vector.
|
|
*
|
|
* @param[in] sdp pointer to a @p SerialDriver object
|
|
*
|
|
* @notapi
|
|
*/
|
|
void sd_lld_stop(SerialDriver *sdp) {
|
|
|
|
#if USE_AVR_USART0
|
|
if (&SD1 == sdp)
|
|
usart0_deinit();
|
|
#endif
|
|
#if USE_AVR_USART1
|
|
if (&SD2 == sdp)
|
|
usart1_deinit();
|
|
#endif
|
|
}
|
|
|
|
#endif /* HAL_USE_SERIAL */
|
|
|
|
/** @} */
|