mayhem-firmware/firmware/chibios/os/hal/platforms/STM32F0xx/stm32_dma.h

395 lines
15 KiB
C
Executable File

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32F0xx/stm32_dma.h
* @brief DMA helper driver header.
* @note This file requires definitions from the ST header file stm32f0xx.h.
* @note This driver uses the new naming convention used for the STM32F2xx
* so the "DMA channels" are referred as "DMA streams".
*
* @addtogroup STM32F0xx_DMA
* @{
*/
#ifndef _STM32_DMA_H_
#define _STM32_DMA_H_
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief Total number of DMA streams.
* @note This is the total number of streams among all the DMA units.
*/
#define STM32_DMA_STREAMS 5
/**
* @brief Mask of the ISR bits passed to the DMA callback functions.
*/
#define STM32_DMA_ISR_MASK 0x0F
/**
* @brief Returns the channel associated to the specified stream.
*
* @param[in] n the stream number (0...STM32_DMA_STREAMS-1)
* @param[in] c a stream/channel association word, one channel per
* nibble, not associated channels must be set to 0xF
* @return Always zero, in this platform there is no dynamic
* association between streams and channels.
*/
#define STM32_DMA_GETCHANNEL(n, c) 0
/**
* @brief Checks if a DMA priority is within the valid range.
* @param[in] prio DMA priority
*
* @retval The check result.
* @retval FALSE invalid DMA priority.
* @retval TRUE correct DMA priority.
*/
#define STM32_DMA_IS_VALID_PRIORITY(prio) (((prio) >= 0) && ((prio) <= 3))
/**
* @brief Returns an unique numeric identifier for a DMA stream.
*
* @param[in] dma the DMA unit number
* @param[in] stream the stream number
* @return An unique numeric stream identifier.
*/
#define STM32_DMA_STREAM_ID(dma, stream) ((stream) - 1)
/**
* @brief Returns a DMA stream identifier mask.
*
*
* @param[in] dma the DMA unit number
* @param[in] stream the stream number
* @return A DMA stream identifier mask.
*/
#define STM32_DMA_STREAM_ID_MSK(dma, stream) \
(1 << STM32_DMA_STREAM_ID(dma, stream))
/**
* @brief Checks if a DMA stream unique identifier belongs to a mask.
* @param[in] id the stream numeric identifier
* @param[in] mask the stream numeric identifiers mask
*
* @retval The check result.
* @retval FALSE id does not belong to the mask.
* @retval TRUE id belongs to the mask.
*/
#define STM32_DMA_IS_VALID_ID(id, mask) (((1 << (id)) & (mask)))
/**
* @name DMA streams identifiers
* @{
*/
/**
* @brief Returns a pointer to a stm32_dma_stream_t structure.
*
* @param[in] id the stream numeric identifier
* @return A pointer to the stm32_dma_stream_t constant structure
* associated to the DMA stream.
*/
#define STM32_DMA_STREAM(id) (&_stm32_dma_streams[id])
#define STM32_DMA1_STREAM1 STM32_DMA_STREAM(0)
#define STM32_DMA1_STREAM2 STM32_DMA_STREAM(1)
#define STM32_DMA1_STREAM3 STM32_DMA_STREAM(2)
#define STM32_DMA1_STREAM4 STM32_DMA_STREAM(3)
#define STM32_DMA1_STREAM5 STM32_DMA_STREAM(4)
/** @} */
/**
* @name CR register constants common to all DMA types
* @{
*/
#define STM32_DMA_CR_EN DMA_CCR_EN
#define STM32_DMA_CR_TEIE DMA_CCR_TEIE
#define STM32_DMA_CR_HTIE DMA_CCR_HTIE
#define STM32_DMA_CR_TCIE DMA_CCR_TCIE
#define STM32_DMA_CR_DIR_MASK (DMA_CCR_DIR | DMA_CCR_MEM2MEM)
#define STM32_DMA_CR_DIR_P2M 0
#define STM32_DMA_CR_DIR_M2P DMA_CCR_DIR
#define STM32_DMA_CR_DIR_M2M DMA_CCR_MEM2MEM
#define STM32_DMA_CR_CIRC DMA_CCR_CIRC
#define STM32_DMA_CR_PINC DMA_CCR_PINC
#define STM32_DMA_CR_MINC DMA_CCR_MINC
#define STM32_DMA_CR_PSIZE_MASK DMA_CCR_PSIZE
#define STM32_DMA_CR_PSIZE_BYTE 0
#define STM32_DMA_CR_PSIZE_HWORD DMA_CCR_PSIZE_0
#define STM32_DMA_CR_PSIZE_WORD DMA_CCR_PSIZE_1
#define STM32_DMA_CR_MSIZE_MASK DMA_CCR_MSIZE
#define STM32_DMA_CR_MSIZE_BYTE 0
#define STM32_DMA_CR_MSIZE_HWORD DMA_CCR_MSIZE_0
#define STM32_DMA_CR_MSIZE_WORD DMA_CCR_MSIZE_1
#define STM32_DMA_CR_SIZE_MASK (STM32_DMA_CR_PSIZE_MASK | \
STM32_DMA_CR_MSIZE_MASK)
#define STM32_DMA_CR_PL_MASK DMA_CCR_PL
#define STM32_DMA_CR_PL(n) ((n) << 12)
/** @} */
/**
* @name CR register constants only found in enhanced DMA
* @{
*/
#define STM32_DMA_CR_DMEIE 0 /**< @brief Ignored by normal DMA. */
#define STM32_DMA_CR_CHSEL_MASK 0 /**< @brief Ignored by normal DMA. */
#define STM32_DMA_CR_CHSEL(n) 0 /**< @brief Ignored by normal DMA. */
/** @} */
/**
* @name Status flags passed to the ISR callbacks
* @{
*/
#define STM32_DMA_ISR_FEIF 0
#define STM32_DMA_ISR_DMEIF 0
#define STM32_DMA_ISR_TEIF DMA_ISR_TEIF1
#define STM32_DMA_ISR_HTIF DMA_ISR_HTIF1
#define STM32_DMA_ISR_TCIF DMA_ISR_TCIF1
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief STM32 DMA stream descriptor structure.
*/
typedef struct {
DMA_Channel_TypeDef *channel; /**< @brief Associated DMA channel. */
volatile uint32_t *ifcr; /**< @brief Associated IFCR reg. */
uint8_t ishift; /**< @brief Bits offset in xIFCR
register. */
uint8_t selfindex; /**< @brief Index to self in array. */
uint8_t vector; /**< @brief Associated IRQ vector. */
} stm32_dma_stream_t;
/**
* @brief STM32 DMA ISR function type.
*
* @param[in] p parameter for the registered function
* @param[in] flags pre-shifted content of the ISR register, the bits
* are aligned to bit zero
*/
typedef void (*stm32_dmaisr_t)(void *p, uint32_t flags);
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @name Macro Functions
* @{
*/
/**
* @brief Associates a peripheral data register to a DMA stream.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] addr value to be written in the CPAR register
*
* @special
*/
#define dmaStreamSetPeripheral(dmastp, addr) { \
(dmastp)->channel->CPAR = (uint32_t)(addr); \
}
/**
* @brief Associates a memory destination to a DMA stream.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] addr value to be written in the CMAR register
*
* @special
*/
#define dmaStreamSetMemory0(dmastp, addr) { \
(dmastp)->channel->CMAR = (uint32_t)(addr); \
}
/**
* @brief Sets the number of transfers to be performed.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] size value to be written in the CNDTR register
*
* @special
*/
#define dmaStreamSetTransactionSize(dmastp, size) { \
(dmastp)->channel->CNDTR = (uint32_t)(size); \
}
/**
* @brief Returns the number of transfers to be performed.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @return The number of transfers to be performed.
*
* @special
*/
#define dmaStreamGetTransactionSize(dmastp) ((size_t)((dmastp)->channel->CNDTR))
/**
* @brief Programs the stream mode settings.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] mode value to be written in the CCR register
*
* @special
*/
#define dmaStreamSetMode(dmastp, mode) { \
(dmastp)->channel->CCR = (uint32_t)(mode); \
}
/**
* @brief DMA stream enable.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*
* @special
*/
#define dmaStreamEnable(dmastp) { \
(dmastp)->channel->CCR |= STM32_DMA_CR_EN; \
}
/**
* @brief DMA stream disable.
* @details The function disables the specified stream and then clears any
* pending interrupt.
* @note This function can be invoked in both ISR or thread context.
* @note Interrupts enabling flags are set to zero after this call, see
* bug 3607518.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*
* @special
*/
#define dmaStreamDisable(dmastp) { \
(dmastp)->channel->CCR &= ~(STM32_DMA_CR_TCIE | STM32_DMA_CR_HTIE | \
STM32_DMA_CR_TEIE | STM32_DMA_CR_EN); \
dmaStreamClearInterrupt(dmastp); \
}
/**
* @brief DMA stream interrupt sources clear.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*
* @special
*/
#define dmaStreamClearInterrupt(dmastp) { \
*(dmastp)->ifcr = STM32_DMA_ISR_MASK << (dmastp)->ishift; \
}
/**
* @brief Starts a memory to memory operation using the specified stream.
* @note The default transfer data mode is "byte to byte" but it can be
* changed by specifying extra options in the @p mode parameter.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] mode value to be written in the CCR register, this value
* is implicitly ORed with:
* - @p STM32_DMA_CR_MINC
* - @p STM32_DMA_CR_PINC
* - @p STM32_DMA_CR_DIR_M2M
* - @p STM32_DMA_CR_EN
* .
* @param[in] src source address
* @param[in] dst destination address
* @param[in] n number of data units to copy
*/
#define dmaStartMemCopy(dmastp, mode, src, dst, n) { \
dmaStreamSetPeripheral(dmastp, src); \
dmaStreamSetMemory0(dmastp, dst); \
dmaStreamSetTransactionSize(dmastp, n); \
dmaStreamSetMode(dmastp, (mode) | \
STM32_DMA_CR_MINC | STM32_DMA_CR_PINC | \
STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_EN); \
}
/**
* @brief Polled wait for DMA transfer end.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*/
#define dmaWaitCompletion(dmastp) { \
while ((dmastp)->channel->CNDTR > 0) \
; \
dmaStreamDisable(dmastp); \
}
/** @} */
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(__DOXYGEN__)
extern const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS];
#endif
#ifdef __cplusplus
extern "C" {
#endif
void dmaInit(void);
bool_t dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
uint32_t priority,
stm32_dmaisr_t func,
void *param);
void dmaStreamRelease(const stm32_dma_stream_t *dmastp);
#ifdef __cplusplus
}
#endif
#endif /* _STM32_DMA_H_ */
/** @} */