diff --git a/Diagnose-firmware-update-in-Windows.md b/Diagnose-firmware-update-in-Windows.md
new file mode 100644
index 0000000..0d5aaf4
--- /dev/null
+++ b/Diagnose-firmware-update-in-Windows.md
@@ -0,0 +1,29 @@
+If you cant get firmware to update/install on your device do these steps.
+
+Try boot into DFU mode by:
+1. Plug device into computer
+2. Press and HOLD the DFU button, While still holding the DFU button, press and release the reset button (WHILE STILL HOLDING THE DFU BUTTON)
+3. Check Windows device manager and see if you have LPC showing up 
+
+![image](https://github.com/eried/portapack-mayhem/assets/4393979/a5d7dccf-ebde-4514-b937-d4e3bd111fa2)
+
+4. If it shows up then you can run "dfu_hackrf_one.bat". Now double check the file name as they look quite similar.
+5. Once it opens, press enter on your keyboard and you should see the following:
+
+![image](https://github.com/eried/portapack-mayhem/assets/4393979/a1779ad3-b502-4d4b-ba26-4cbec7cd2b76)
+
+6. Once that is done, you need to check device manager and see if you can now see a new device showing up
+
+![image](https://github.com/eried/portapack-mayhem/assets/4393979/419d554c-872c-4c97-81bd-f62cce56fc1d)
+
+7. If this device is showing up, then you can now run "flash_portapack_mayhem.bat" and press enter. You should now see the following:
+
+![image](https://github.com/eried/portapack-mayhem/assets/4393979/c53f0750-e044-49ea-b741-78144519742a)
+
+8. Once that is done, you should be able to press the reset button and your device will boot up. If not, then please refer to the wiki here: [Won't boot](https://github.com/eried/portapack-mayhem/wiki/Won't-boot
+
+
+
+### Unknown device
+If you see **Unknown device** then you will need to install your device drivers.
+![image](https://github.com/eried/portapack-mayhem/assets/4393979/30a0e224-2d29-4602-ab1c-f656ce2d505c)
\ No newline at end of file