From 228807893ff0c158997e40a97f1a4d6ec3b0d4f2 Mon Sep 17 00:00:00 2001 From: Endaf Jones Date: Sun, 15 Sep 2024 20:34:58 -0600 Subject: [PATCH] Case mixup in SI Prefix in receive frequency. It's Mega-Hertz (MHz), not Milli-Hertz (mHz). --- TPMS-Cars.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/TPMS-Cars.md b/TPMS-Cars.md index 34387c0..257250f 100644 --- a/TPMS-Cars.md +++ b/TPMS-Cars.md @@ -1,10 +1,10 @@ -[Tire Pressure Monitoring System (TPMS)](https://en.wikipedia.org/wiki/Tire-pressure_monitoring_system) operate in the ISM Licence free bands. In USA and most of the world they use 315mHz, in Europe the frequency is 433.92mHz. The TPMS App work well with many common standards used in the automotive industry particularly from [Schrader TPMS sensors.](https://www.schradertpms.com), and this seems a common standard used in the automotive industry. +[Tire Pressure Monitoring System (TPMS)](https://en.wikipedia.org/wiki/Tire-pressure_monitoring_system) operate in the ISM Licence free bands. In USA and most of the world they use 315MHz, in Europe the frequency is 433.92MHz. The TPMS App work well with many common standards used in the automotive industry particularly from [Schrader TPMS sensors.](https://www.schradertpms.com), and this seems a common standard used in the automotive industry. The TPMS App display is configured to display the decoded data received from the tire pressure sensors. The interval of the data being sent by each tire varies from every few seconds to minutes depending on the car and sensors, often triggered by wheel movement or rapid pressure changes. Most Schrader sensors can also be triggered to transmit data using a TPMS test tool (which transmits a signal on 125 kHz). The Key Items on the App that can be selected with the cursor and changed with the encoder knob are: Title bar: The usual Items may be changed and displayed. -* **Frequency:** Either 315mHz or 433.92mHz +* **Frequency:** Either 315MHz or 433.92MHz * **kPa/PSI :** By highlighting this item the units of pressure displayed can be changed between kPA and PSI. * **C/F :** By highlighting this item the units of temperature displayed can be changed between Celsius and Fahrenheit. * **Gain:** Setting are shown in order of Amp 0=0db or 1=14dB, LNA(IF) (0-40) and VGA (Baseband Gain) (0-62).