From 2c80b6a32a34b54e8bd230e6e5bdc513d1bfc397 Mon Sep 17 00:00:00 2001
From: Brumi-2021 <86470699+Brumi-2021@users.noreply.github.com>
Date: Sun, 21 May 2023 11:06:33 +0200
Subject: [PATCH] Updated Diagnose firmware update in Windows (markdown)

---
 Diagnose-firmware-update-in-Windows.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Diagnose-firmware-update-in-Windows.md b/Diagnose-firmware-update-in-Windows.md
index cabb695..25c7f15 100644
--- a/Diagnose-firmware-update-in-Windows.md
+++ b/Diagnose-firmware-update-in-Windows.md
@@ -4,7 +4,7 @@ Try boot into DFU mode by:
 1. Plug device into computer
 2. Press and HOLD the DFU button, While still holding the DFU button, press and release the reset button (WHILE STILL HOLDING THE DFU BUTTON).
 
-> Note : in some particular H2 (ex H2R4 with battery ), reset button does not  make a proper reset , it just freeze the screen , and do not allow you to enter in DFU . In that case, unplug it from the computer, switch off the unit with two short pushes to the big encoder button (power off). And then keep pressing DFU button , a short push button to the encoder (power on) leads you into a proper DFU Mode. And now you can plug it through USB cable to the computer, and continue with process.
+> Note : in some particular H2 (ex H2R4 with battery ), reset button does not  make a proper reset , it just freeze the screen , and do not allow you to enter in DFU . In that case, unplug it from the computer, switch off the unit with two short pushes to the big encoder knob button (power off). And then keep pressing DFU button , a short push button to the encoder knob button (power on) leads you into a proper DFU Mode. And now you can plug it through USB cable to the computer, and continue with process.
 
 
 3. Check Windows device manager and see if you have LPC showing up