TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-11-27 12:05:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated APRS TX (markdown)

Si 2022-02-20 16:00:14 +00:00
parent c3744b3c71
commit 31af2d9210
1 changed files with 8 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
APRS-TX.md

@ -1,15 +1,17 @@
[Automatic Packet Reporting System](Information-on-ARPS) TX App sends messages on selected Frequency. The App allows the configuration of the APRS Stream. [Automatic Packet Reporting System](Information-on-ARPS) TX App sends messages on selected Frequency. The App allows the configuration of the APRS Stream.
The App is marked as Beta but it appears that it does send messages in AFSK. The App is marked as Beta but it appears that it does send messages in AFSK ok in the right AX25 format.
The App has settings for: The App has settings for:
* "Source SSID" * "Source;" Address is selected by moving cursor to the right side of the Lable and selecting each alphanumeric character needed then stepping the cursor on to the next position until all 6 fields are completed. Then step on to "SSID:" and select the numeric number 0-15.
* "Desitination ID" it has no location for the adding of the Call Sign That is used with the SSID. * Destination Address "Dest" is selected by moving cursor to the right side of the Lable and selecting each alphanumeric character needed then stepping the cursor on to the next position until all 6 fields are completed. Then step on to "SSID:" and select the numeric number 0-15.
* The message content can be added in the "Info Field" by selecting the "Set" Button a maximum of 30 characters can be added not the typical maximum of 67 or 256. * The message content can be added in the "Info Field" by selecting the "Set" Button a maximum of 30 characters can be added not the typical maximum of 67 or 256.
* Frequency for TX from the on screen keypad At the bottom of the App Screen you will find
* Deviation * Select the Primary Frequency by cursor for TX from the on screen keypad e.g. 144.800
* Gain settings of IF (0-47) and RF AMP "0dB" or 14dB * Select the Frequency Step size by cursor then use by rotary selection e.g 12k5
* Select the Deviation by cursor then use by rotary selection e.g. 5kHz
* Gain setting of IF 0-47 and AMp Gain of either 0dB or 14dB. Note that the couour of the gain setting chage colour based on the TX output power setting. Being a combined total of IF and AMP: 0-17 Green, 18-38 Yellow, 39-47 Orange,48-61 Red,
The transmission is trigered by the "Start" Button and stops after the end of the message sequence. The transmission is trigered by the "Start" Button and stops after the end of the message sequence.