From 4998bdad78e1f5d445dcb6467190426054d3eb90 Mon Sep 17 00:00:00 2001
From: Erwin Ried <1091420+eried@users.noreply.github.com>
Date: Tue, 5 Nov 2024 15:43:00 +0100
Subject: [PATCH] Updated Encoder (markdown)

---
 Encoder.md | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

diff --git a/Encoder.md b/Encoder.md
index 2dbba13..ada3024 100644
--- a/Encoder.md
+++ b/Encoder.md
@@ -13,21 +13,14 @@ Depending on the shaft of your encoder, you can use [diverse knobs](https://www.
 
 ![image](https://github.com/user-attachments/assets/cd117b4e-ba62-4515-8b44-4b492b917e67)
 
-## Encoder Replacement for PortaPack H2
+## Encoder Replacement on PortaPack H2
 
-### Disassembly
-To replace the encoder, you'll first need to disassemble the PortaPack. 
+### Disassemble the device
+1. Unscrew the screws and SMA connector rings.
+2. Pull apart the case and carefully separate the PortaPack from the HackRF by gently pulling upwards to disconnect the pins.
+3. Disconnect the speaker and battery.
 
-1. Unscrew the four screws holding the top plate.
-2. Unscrew the four screws securing the bottom plate.
-3. Unscrew the SMA connector rings on both plates.
-4. Pull apart the case and carefully separate the PortaPack from the HackRF by gently pulling upwards to disconnect the pins.
-5. Once the PortaPack is free, flip it around and locate the speaker and battery connectors.
-6. Unplug both connectors, and set the the rest aside.
-> [!WARNING]  
-> Mark or take note of which connector is for the speaker and which is for the battery to avoid confusion and possible damage during reassembly.
-
-### Removing the Defective Encoder
+### Removing the Encoder
 ![image](https://github.com/user-attachments/assets/dc82574a-1c6c-4c69-84f0-0f0b6f5060c1)
 
 The encoder is mounted in a way that makes it difficult to desolder due to pin placement. 
@@ -39,7 +32,7 @@ If you are having trouble with this, try the following technique:
 > [!WARNING]  
 > The upper-most pin is close to the screen, take care not to scorch it with your soldering iron.
 
-### Preparing and Installing the Replacement Encoder
+### Installing the Replacement Encoder
 
 The replacement rotary encoder will likely have long leads designed for through-hole mounting. However, the PortaPack uses surface mounting for this component, so the leads will need to be trimmed down. Here’s how to do it:
 > [!NOTE]