TheArchive/mayhem-firmware
1
0
Fork 0
mirror of https://github.com/portapack-mayhem/mayhem-firmware.git synced 2024-11-30 13:35:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated Usage cautions (markdown)

Erwin Ried 2024-05-20 18:20:48 +02:00
parent b7d957fc51
commit 4b48078dcf
1 changed files with 12 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Usage-cautions.md

@ -1,13 +1,15 @@
The LNA of HackRF is extremely sensitive, thus you need to notice the following things: The LNA of HackRF is sensitive and can get damaged
# SMA port
- DO NOT change/ swap/ take off/ put on antennas while power is on IN ANY CASE.
- If you use an antenna that expose the literal metal part (for example a telescopic antenna), DO NOT physically touch the antenna with you hands/ body/ or any physical things that is conductive, since the static elec is dangerous to LNA. (It's not like it's definitely would damage it, but a thing that you may should prevent. Antennas which have plastic protection however won't be influenced.)
# Monitoring range # Prevention
- The LNA of hackrf is physically between SMA port and radio front end ## SMA port
- Thus, you shouldn't receive near high power transmitters, even if it's not in the range that you are monitoring. - DO NOT swap the antenna while power is on.
- For example: You are receiving FM radio at 100.00MHz, and there's a high power transmitter at 2.5GHz around you, the transmitter will still blow your LNA, if you set LNA/AMP too high and/or too near the transmitters, even if 2.5GHz is not in the freq range that you are monitoring. - If you use an antenna that expose a metal part, DO NOT touch the antenna with you hands/body (static electricity can damage the LNA)
# I suspect I damaged the LNA, how do i check? ## Monitoring range
- You shouldn't receive near high power transmitters, even if it's not in the range that you are monitoring
# Diagnostic
- Try listen local radio. Try with AMP on and off both. - Try listen local radio. Try with AMP on and off both.
- Try capture and replay a **non**-rolling-code <sub>(to prevent break the rolling sync)</sub> fob (radio remote <sub>not IR remote which is more common</sub>). Try with AMP on and off both. - Try capture and replay a **non**-rolling-code <sub>(to prevent break the rolling sync)</sub> fob (radio remote <sub>not IR remote which is more common</sub>). Try with AMP on and off both.
# Repair