From 4f2216c96589bf5cb8b5eb71ac99a29adcd5118c Mon Sep 17 00:00:00 2001
From: euquiq <31453004+euquiq@users.noreply.github.com>
Date: Fri, 19 Jun 2020 19:02:13 -0300
Subject: [PATCH] Updated Differences Between H1 and H2 models (markdown)

---
 Differences-Between-H1-and-H2-models.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Differences-Between-H1-and-H2-models.md b/Differences-Between-H1-and-H2-models.md
index 591f035..58e975c 100644
--- a/Differences-Between-H1-and-H2-models.md
+++ b/Differences-Between-H1-and-H2-models.md
@@ -37,7 +37,7 @@ Only the soldering pads for an internal speaker connector header are present. Th
 **You can solder a laptop / tablet speaker in H1 speaker pads.** In order to enable it, you will need to install MAYHEM firmware, where you can also configure under **OPTIONS -> INTERFACE** the addition of a SPEAKER button on your top status bar.
 
 ### "Audio devil may be in the details"
-Since the firmware is shared between H1 and H2, on Portapack H2 you end up powering up TWO speaker amplifiers: The one inside AK4951 IC, and the extra CS8122S one.
+Since the firmware is shared between H1 and H2, on Portapack H2 you end up powering TWO speaker amplifiers: The one inside AK4951 IC, and the extra CS8122S one.
 
 # Power Supply