From 5cd9a9a6d4fbb8bce54d44bd0cafa8472b93780e Mon Sep 17 00:00:00 2001 From: pathetic nihilist Date: Tue, 15 Aug 2023 14:56:54 +0800 Subject: [PATCH] Updated Won't boot (markdown) --- Won't-boot.md | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/Won't-boot.md b/Won't-boot.md index cab983d..cadc3c9 100644 --- a/Won't-boot.md +++ b/Won't-boot.md @@ -1,7 +1,7 @@ # My device wont start up ## White screen -If you device won't boot and leaves you on white screen, then you will need to power off the device and then hold down the **UP** button while you power it on. This could take up to 10 seconds. +If you device won't boot and leaves you on white screen, then you will need to power off the device and then holding the **UP** button while you power it on. This could take up to 10 seconds. If this does not work, then try the same thing but this time holding the **DOWN** button (Remembering to wait up to 10 seconds). @@ -20,6 +20,20 @@ If you device won't boot and leaves you on a black screen, then you will need to * LEFT key = LCD driver 2 QFP100 chip * RIGHT key = LCD driver 1 QFP100 chip +> If you are having trouble understanding these procedures, here are clearer step-by-step instructions: +>1. power off your device +>2. press and holding one of the buttons listed above. （**DO NOT RELEASE IT YET**） +>3. power on +>4. Wait for at least 10 seconds. +>5. if : you see the screen displaying any valid content*, release the button you have chosen. +>else if : you still not seeing any valid content* displayed, choose another button and start again from step 1. +>6. power off, wait 5s, power on again **without** holding any buttons listed above, check if it boot successfully. +>if : you see the screen display any valid content* : we are done. +>else if : it boots successfully last round, but fail again this time : check the coin battery. + +>p.s. ^valid content : either a splash screen or any of the interface + + _**Note:** H2+ usually require you to hold the **UP key** on the first boot to configure them._ _This is valid from nightly version **n_220412** and stable release version: **v1.5.1**_