From 7b155b4b54e1cb540fb15e9c9a2bbda01932c6d0 Mon Sep 17 00:00:00 2001 From: gullradriel <3157857+gullradriel@users.noreply.github.com> Date: Fri, 31 Mar 2023 18:34:22 +0200 Subject: [PATCH] Updated Recon (markdown) --- Recon.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Recon.md b/Recon.md index 05d1242..75acf3f 100644 --- a/Recon.md +++ b/Recon.md @@ -1,5 +1,5 @@ # Recon App -![Recon App Menu Entry](https://www.nilorea.net/wp-content/uploads/2022/10/MainScreen.png) +![Recon App Menu Entry](https://www.nilorea.net/wp-content/uploads/2023/03/PORTAPACK_RECON.png) # Introduction The Recon app is full rework of the Scanner app, offering different possibilities and customisations. @@ -47,7 +47,7 @@ Buttons and information description, from top to bottom, and left to right. [NAM * [BW] , [SQUELCH], [W],[L] => bandwidth for actual demod, squelch is the level of DB needed to start to lock on a signal, W (wait after match) is the time we will stay on the frequency if it's reaching nb_locks during lock_wait (continously or sparsely). If wait is a negative number, then it represent the time we are staying on a matched frequency waiting for new activity, and a new lock during the wait restart the counters (you keep staying on it until a full wait without a lock is reached). L (lock_wait) is the lock wait timer, representing the maximum time we stay on a freq waiting for a lock. The lock wait timer is adjusted to the smallest optimal value at app startup and after a OPT save. You may adjust it to fit your needs. -* XXX / XXX , XX db, XX/XX value , [OPT] => index of the current frequency in the loaded list, number of frequencies in the list, actual DB value, number of locks / number of needed locks for a match, button to the settings page +* [XXX] / XXX , XX db, XX/XX value , [OPT] => index of the current frequency in the loaded list (move with encoder, or set a value by clicking), number of frequencies in the list, actual DB value, number of locks / number of needed locks for a match, button to the settings page * FREQ: XXXX => Current frequency