mirror of
https://github.com/portapack-mayhem/mayhem-firmware.git
synced 2024-11-27 12:05:34 +00:00
Repeater mode details, TOC
gullradriel
parent
3899f97db3
commit
83caf59b11
150
Recon.md
150
Recon.md
@ -2,6 +2,48 @@
|
||||
|
||||
|
||||
|
||||
- [Recon App](#recon-app)
|
||||
* [Important note](#important-note)
|
||||
* [Introduction](#introduction)
|
||||
+ [In AM/NFM/WFM mode](#in-am-nfm-wfm-mode)
|
||||
+ [In SPEC mode](#in-spec-mode)
|
||||
* [Limitations](#limitations)
|
||||
- [TODO first](#todo-first)
|
||||
* [Common defaults options to set](#common-defaults-options-to-set)
|
||||
- [Main Screens](#main-screens)
|
||||
- [CONFIG](#config)
|
||||
* [Main RECON settings page](#main-recon-settings-page)
|
||||
* [More CONFIG settings page](#more-config-settings-page)
|
||||
- [Recon/Search/Manual](#recon-search-manual)
|
||||
* [RECON mode](#recon-mode)
|
||||
* [SCAN mode](#scan-mode)
|
||||
* [MANUAL-S](#manual-s)
|
||||
* [Wait/lock Coloring conditions:](#wait-lock-coloring-conditions-)
|
||||
- [Color meaning for main freq](#color-meaning-for-main-freq)
|
||||
- [Wait modes](#wait-modes)
|
||||
- [Lock counts](#lock-counts)
|
||||
- [Matching modes](#matching-modes)
|
||||
* [Continuous](#continuous)
|
||||
* [Sparse](#sparse)
|
||||
- [Frequencies to scan](#frequencies-to-scan)
|
||||
- [Modulation Mode](#modulation-mode)
|
||||
- [Persistant settings](#persistant-settings)
|
||||
- [Freqman file format](#freqman-file-format)
|
||||
- [HamRadio type](#hamradio-type)
|
||||
- [Repeater type](#repeater-type)
|
||||
* [In Recon, when current type is Repeater and repeater mode is DISABLED:](#in-recon--when-current-type-is-repeater-and-repeater-mode-is-disabled-)
|
||||
* [In Recon, when current type is Repeater and repeater mode is ENABLED:](#in-recon--when-current-type-is-repeater-and-repeater-mode-is-enabled-)
|
||||
* [Advanced Repeater configuration](#advanced-repeater-configuration)
|
||||
+ [Repeater half duplex dual direction example](#repeater-half-duplex-dual-direction-example)
|
||||
+ [What are the possibilities](#what-are-the-possibilities)
|
||||
- [Workflow and tips](#workflow-and-tips)
|
||||
* [Classic workflow](#classic-workflow)
|
||||
* [Repeater workflow:](#repeater-workflow-)
|
||||
* [Tips:](#tips-)
|
||||
- [Troubleshooting](#troubleshooting)
|
||||
- [Scan speed vs Chosen modulation mode](#scan-speed-vs-chosen-modulation-mode)
|
||||
- [Power consumption](#power-consumption)
|
||||
|
||||
## Important note
|
||||
Repeater and all associated repeat modes are under development. The documentations related to it are for devs/nightly testers. You will not yet find it in stable.
|
||||
|
||||
@ -229,6 +271,114 @@ Squelch is saved between runs / updates
|
||||
# Freqman file format
|
||||
See [Freqman Manager](Freq-manager) page
|
||||
|
||||
# HamRadio type
|
||||
HamRadio type is special case.
|
||||
|
||||
It represents a Ham Radio relay: relay RX freq for frequency_a (r=) , relay TX freq for frequency_b (t=)
|
||||
|
||||
In Recon, when current type is HamRadio:
|
||||
|
||||
- Both RX and TX frequencies are scanned for activity as two single frequencies
|
||||
- When clicking 'MIC' while on one of the HamRadio entry frequencies, Mic TX frequency is set to relay RX frequency, and Mic RX frequency is set to relay TX frequency
|
||||
|
||||
# Repeater type
|
||||
Repeater type is special case. It's an entry that allows the portapack to act as a half duplex Repeater.
|
||||
|
||||
The frequency_a (l=) is the Repeater listening frequency, and frequency_b (t=) is the Repeater TX frequency
|
||||
|
||||
**!! WARNING: These functions are activating TX in Recon. You have to know what you do !!**
|
||||
|
||||
If you want to use the Repeater functionality:
|
||||
- in CONFIG, 'auto record locked' and 'repeater' have to be checked
|
||||
- while you're at it, set the number of reps and the delay before each TX
|
||||
- the modulation type have to be SPEC and use the target relay signal bandwidth
|
||||
|
||||
## In Recon, when current type is Repeater and repeater mode is DISABLED:
|
||||
- only listening freq is used to check on activity (l=)
|
||||
- entry will be scanned as single frequency
|
||||
|
||||
## In Recon, when current type is Repeater and repeater mode is ENABLED:
|
||||
- listening freq is used to check on activity (l=)
|
||||
- entry will be scanned as single frequency
|
||||
- on squelch level match raw record is started
|
||||
- on timeout or inactivity timeout the raw record is stopped
|
||||
- tx delay is played if any
|
||||
- raw record is replayed using the Repeater TX (t=) frequency
|
||||
|
||||
Raw Record, when used in conjunction of Repeater, is using the same file to store the record: /CAPTURES/RECON_REPEAT.C16
|
||||
|
||||
## Advanced Repeater configuration
|
||||
|
||||
The Repeater, in addition of Recon, can be used as a half duplex multiplexed relay.
|
||||
|
||||
Here is a graph showing how Alice and Bob could talk using a Repeater list in Recon
|
||||
|
||||
### Repeater half duplex dual direction example
|
||||
|
||||
```mermaid
|
||||
flowchart LR
|
||||
subgraph Repeater half duplex dual direction
|
||||
AliceTX(Alice TX)
|
||||
AliceRX(Alice RX)
|
||||
BobTX(Bob TX)
|
||||
BobRX(Bob RX)
|
||||
R1TX(Repeater 1 TX)
|
||||
R1RX(Repeater 1 RX)
|
||||
R2TX(Repeater 2 TX)
|
||||
R2RX(Repeater 2 RX)
|
||||
AliceTX-->R1RX--->R1TX--->BobRX
|
||||
BobTX-->R2RX--->R2TX--->AliceRX
|
||||
subgraph Alice
|
||||
AliceTX
|
||||
AliceRX
|
||||
end
|
||||
subgraph Bob
|
||||
BobRX
|
||||
BobTX
|
||||
end
|
||||
subgraph Recon Repeater's list
|
||||
subgraph "Repeater 1"
|
||||
R1RX
|
||||
R1TX
|
||||
end
|
||||
subgraph "Repeater 2"
|
||||
R2RX
|
||||
R2TX
|
||||
end
|
||||
end
|
||||
end
|
||||
```
|
||||
|
||||
**In our example:**
|
||||
|
||||
- a single portapack is used
|
||||
- in a freqman file, we are using two Repeater entries: R1 and R2
|
||||
- R1 is to repeat Alice TX to Bob RX
|
||||
- R2 is to repeat Bob TX to Alice RX
|
||||
- Recon is set in autostart, continuous scan
|
||||
- Wait timeout is set to -1500 (which in our case mean stop recording after 1500ms of inactivity)
|
||||
- Lock timeout is set to 100
|
||||
- Match Mode is set to continuous
|
||||
- NB match is set to 3
|
||||
- auto record locked, repeater are checked
|
||||
- nb repeat is set to 1 and the delay to 0
|
||||
|
||||
**What is going to happen:**
|
||||
|
||||
- Alice is going to use any tone/start delay to open Repeater 1
|
||||
- Recon is matching a squelch level on Repeater 1 and is going to start record
|
||||
- Alice have stopped talking. 1500 ms later, the record is stopped
|
||||
- Recon transmit the record to Bob, using Repeater 1 TX frequency
|
||||
- Bob hear Alice. He wants to answer, and send to Repeater 2
|
||||
- Recon is matching a squelch level on Repeater 2 and is going to start record
|
||||
- Bob have stopped talking. 1500 ms later, the record is stopped
|
||||
- Recon transmit the record to Alice, using Repeater 2 TX frequency
|
||||
|
||||
### What are the possibilities
|
||||
|
||||
- as long as Alice and Bob are not talking simultaneously, they can use the Repeater as much times each as they want
|
||||
- you can add more Repeaters in the list. Keep in mind that it's 100ms more scan time for each entry
|
||||
|
||||
# Workflow and tips
|
||||
|
||||
## Classic workflow
|
||||
|
||||
Loading…
Reference in New Issue
Block a user