From a051d289c8b7856112b13bf7a531bc4d790108b1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=EA=91=92=EA=89=BC=EA=90=82=EA=82=B5=EA=82=B5?= Date: Thu, 3 Nov 2022 16:34:48 +0800 Subject: [PATCH] Updated Push buttons and button caps (markdown) --- Push-buttons-and-button-caps.md | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Push-buttons-and-button-caps.md b/Push-buttons-and-button-caps.md index 40a4bc9..6b235f1 100644 --- a/Push-buttons-and-button-caps.md +++ b/Push-buttons-and-button-caps.md @@ -1,3 +1,4 @@ +# Push-buttons The type of push-buttons used on the Portapack is SMD tactile switches of 6 mm per side and 7 mm of height. You can buy replacements here: https://a.aliexpress.com/_dZqx4vv The easiest way to remove them is to clip the legs off, clean the pads carefully with solder wick and solder the new buttons. @@ -8,3 +9,6 @@ You can also find replacement caps for the tactile switches: https://www.aliexpr Alternative caps for the switches: https://www.ebay.com/itm/284831256446 +# Encoder aka knob (H2/H2+) +Use a 20 bit ec11 encoder. +It may have weird performances if you installed a 24 bit ec11.(Ref. https://discord.com/channels/719669764804444213/737376558754300081/951522295069962300) \ No newline at end of file