diff --git a/Options.md b/Options.md
index eaad45c..dab934e 100644
--- a/Options.md
+++ b/Options.md
@@ -1,4 +1,4 @@
-This section provides a set of utilities  that can be used to configure some aspects of the PortaPack and are described below:
+This section provides a set of utilities that can be used to configure some aspects of the PortaPack and are described below.  Settings are saved in persistent memory.
 ## Audio
 This allow the setting of the tone Key mixer setting as a % of the audio level.
 ## Radio
@@ -7,10 +7,11 @@ In the radio section  there  are two options,
 2. Second item is turning on or off the Antenna Bias Tee.
 ## User Interface
 The UI interface  setting for the following can be Enabled (tick) or Disabled (x) or selected value for the backlight timeout:
-* Hide the speaker
-* Backlight off after 5 seconds( default) or can be set to 5,15,30 seconds or 1,3,5,10 minutes , the value is held in persistent memory.
-* Show the Splash screen
-* Show the clock - This allows the date and time to be updated by moving the cursor to the select item and use the rotary knob to adjust the value. 
+* Backlight off after 5 seconds( default) or can be set to 5,15,30 seconds or 1,3,5,10 minutes.
+* Show the Splash screen at power-up.
+* Show the clock - This allows the date and time to be updated by moving the cursor to the select item and use the rotary knob to adjust the value.
+* Back button in menu - Enables a "Back" button on all menu screens.
+* Show/Hide Status Icons - Select which status bar icons are visible or hidden.
 ## Date/Time
 Set the date and time.
 ## Calibration
@@ -18,7 +19,7 @@ This provides an app for the calibration of the screen and alignment by followin
 
 You have to keep pressed for at least a second on each target for the app to guess the touch area correctly and show next target on release.
 ## App Settings
-Allow to specify if you want to load / save application settings at app start/end:
+Allow to specify if you want to load / save application settings at app start/end.  App settings are saved in the /SETTINGS folder.
  * Load app settings 
  * Save app settings
 ## Converter
@@ -65,4 +66,7 @@ Use the '+' or '-' filed to change to correction mode (addition or soustraction
 
 Use the MHz RX and MHz TX field to set the correction in each mode.
 
-Settings are automatically saved in persistent memory.
\ No newline at end of file
+Settings are automatically saved in persistent memory.
+
+## Encoder Dial
+Allows the sensitivity of the encoder dial to be adjusted between Low, Normal, and High.
\ No newline at end of file