From b825e7fe9ca26d5e7c5159d60a4f19641843e835 Mon Sep 17 00:00:00 2001 From: gullradriel <3157857+gullradriel@users.noreply.github.com> Date: Wed, 24 May 2023 20:30:37 +0200 Subject: [PATCH] Updated Recon (markdown) --- Recon.md | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/Recon.md b/Recon.md index b09f310..ea28913 100644 --- a/Recon.md +++ b/Recon.md @@ -33,7 +33,7 @@ We highly encourage you to go and check what's under the "CONFIG" button and get ## Common defaults options to set -Go into "CONFIG" +Go into "CONFIG": Main: @@ -64,7 +64,7 @@ Buttons and information description, from top to bottom, and left to right. [NAM * TIMER, CTCSS => elapsed timer for current frequency lock (0 if no lock) , detected tone if NFM is selected -* Current input name (Will be in red if file contain too much lines or if an error description is shown), [MANUAL-S/SCANNER/RECON] => currently used mode. Manual Search, Scanner, Recon/Search. +* Current input name (Will be in red if file contain too much lines or if an error description is shown), [MANUAL-S/SCANNER/RECON] => currently used mode. Manual Search, Scanner, Recon/Search * [START], [END], [SEARCH] => set the manual start and end of a range and launch a search on it. These values will be updated by the search if auto update m-ranges is checked. If highlighted, you can use the rotary encoder to adjust start or end @@ -72,7 +72,7 @@ Buttons and information description, from top to bottom, and left to right. [NAM * [PAUSE] , [AUDIO] , [STORE] => pause or resume the search. If highlighted, you can use the rotary encoder to manually step in the frequencies/ranges, jump to Audio App, store actual frequency in output file -* [FW], [RST], [MIC TX] , [REMOVE] => forward/reverse , reset search (it's restarting from the beginning of input file), jump to Mic app, remove a frequency from output file +* [FW], [RST], [MIC TX] , [REMOVE/DELETE] => forward/reverse , reset search (it's restarting from the beginning of input file), jump to Mic app, Remove a frequency from active/loaded list in RECON mode or Delete from both active/loaded list and output file in SCANNER mode # CONFIG ## Main RECON settings page @@ -101,16 +101,19 @@ One of the first two options have to be checked else nothing will be loaded at a # Recon/Search/Manual When using the Recon app, 3 modes are accessibles. -You can switch from RECON to SEARCH using the GUI button, and to Manual search using the Manual-S button (just under the RECON/SEARCH button) +You can switch from RECON to SEARCH using the GUI button, and to Manual search using the Manual-S button (just under the RECON/SEARCH button). ## RECON mode -Mode button is in blue, and the label is 'RECON'. +Mode button is in blue, and the label is 'RECON'. In that mode it takes what you choose in "CONFIG/select input file" and use it as the list to search. The matched frequencies (if autosave is checked or 'add' is used) are put in what you choose in "CONFIG/select output file". -STORE and REMOVE are working on what you selected in "CONFIG/select output file" but changes are not reflected in the used list. +REMOVE is removing current entry from active/loaded list. No files are touched. -In that mode you have an input search/recon list, and an output file. +STORE is adding current entry to output file. + +In that mode you have an input search/recon list, and an output file. You can temporary 'disable' some entries by a hit on REMOVE. +Clicking on RST is reloading the fully populated list. ## SEARCH mode Mode button is in red, and the label is 'SCANNER'. @@ -119,7 +122,9 @@ In that mode it takes what you choose in "CONFIG/select output file" and use it The matched frequencies (if autosave is checked or 'add' is used) are put in what you choose in "CONFIG/select output file". -STORE and REMOVE are working on what you selected in "CONFIG/select output file" and changes are 'live' in the list. reflected in the used list. +DELETE is removing current entry from active/loaded list and from output file. + +STORE is adding current entry to output file. In that mode you have the same file used as an input list and an output file. @@ -128,7 +133,7 @@ In that mode RECON or SEARCH mode are invalidated. Values in GUI are used as a s The matched frequencies (if autosave is checked or 'add' is used) are put in what you choose in "CONFIG/select output file". -STORE and REMOVE are working on what you selected in "CONFIG/select output file" but changes are not reflected in the used list. +STORE and REMOVE are working on the output file but changes are not reflected in the used list since it's a loaded range. In that mode you have a single range as an input list, and an output file.